Vendor Returns through MIGO

Hi Guys
I have a scenario - where after MIRO and invoicing has happened, we do a return delivery to the vendor through MIGO {A02 return delivery, R02 material document}....
My question is, this does not impact the open AP postings right? and to make the open item reduced for the vendor, would I have to do an FB65 to make sure the open AP amount is reduced?
Or would doing MR11, facillate the correction of the FI postings?
Thank you
Rukshana

Hi,
The context for doing MR11 is differrant.In general during GR a account GRIR will be posted .This account will get cleared when if do IR.
sometimes this account will not get tallied.To see that the GR/IR account balanced MR11 will be done , and which is called as account maintanance.
In your case you are returning the qty to the vendor and you have posted the vendor invoice.Posting a credit memeo means, you are claiming the amout for that qty which you have posted to vendor.
Regards,

Similar Messages

Vendor return through SD

Hi to all!
I have configured vendor return through SD delivery and billing.I want to capture excise invoice also. But i cannot copy pricing elements like price, ED, Cess, SH cess etc.
How can i do this. Advance thanks.

You could hve used the Excise Invoice creation through T.Code:J1IS as a better solution.
Process through SD route will be as under:
Prerequisite:-
<u>Master Data</u>
1. Customer Master
2. Material Master
3. Price Master (Optional)
Configuration:
1. Use Standard Delivery Type LO for Delivery without Order.
2. Maintain Delivery Item Category Determination for Delivery Type LO i.e DLN
3. Create new Billing Type (Copy of F2) & maintain New Document Procing Procedure for the same.
4. New Pricing Procedure (Most of the Condition Type are recommenmded to be manual, so that the values can bemaintained same as Purchases. Ensure to maintain separate Account key & configure T.Code VKOA to determine required G/L account. Maintain the Price, Excise Duty, etc as manual condition so that the values can be maintained manually.
5. After creation of Billing Document, Create Excise Invoice through Transaction J1IIN. At this stageExcise is captured into registers.
Assumption: MIGO & MIRO is being done completely, as received by vendor.
Regards,
Rajesh Banka
Reward points if helpful.
5.

Vendor return through sales cycle

hi sap gur's
we want map senarios for vendor return with excise, my client have deeply cin implimented
my leam lead told me vendore return map through sales cycle
means
return mat.doc through 122
than creat sales order,, delivery than billing but taking care no accounting document ganareted during sales cycle
how i can map vendore return senario with excise revers in sales cycle
thanks

Dear sir.
First in vendor master Purchasing Data, click Returns Vendor indicator.
when u click the return vendor indicator system will pop up one window , give the account group and shipping Cond. system will automatically create the vendor and it will assign to the vendor and customer also.
Go to MIGO select return delivery and give the material document number.
in general header tab click the indicator Via delivery. and check and post, system will create the outbond delivery number.
go to VL02n give the outbond delivery number and do the PGI.
with respective outbond delivery number create the per-form billing in vf01. with respective bill number create the excise invoice in J1IIN.
regards
jrp

How to add three batches for a single material during vendor return through

Dear All,
We have to sent back some stock to vendor through MBRL.This stock consist of two batches.But during MBRL i could able to enter only one batch.How can i give more batches in this screen.
Please give the inputs.
Thanks and regards,
deepti

If you are doing it with MBRL, then you have to specify a material document number.
So the posting can only have the same info as SAP could adopt from this material document.
You probably have to execute MBRL several times

Can not "post goods issue" against Vendor Return PO.

Hello Friends,
**I have a problem During the "Vendor Return Through Purchase Order" Process.I crated a PO with return flag set.**
**Then 1) Created a outbound delivery against purchase order (VL10B)**
2) Created a Billing (VF01)**
3) Next is VL02N - While doing the "post goods issue" where i got following error message "Update control of movement type is incorrect (entry 161 X X _ L)"**
Its shows setting related to Mvt 161 to update .I check allowed transaction with respect to 161....VL02N is there .....But don't understand what change needed in "Update control /WM movement type is needed.....Pls suggest any solution........Thanx**
Regards
Sachin
*Error Messafe -
Update control of movement type is incorrect (entry 161 X X _ L)
Message no. M7226
Diagnosis
The system could not find entry 161 X X _ L in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.

Hi Antony,
Thanx for reply.
1) I had assign delivery Type (RL -Returns Purchase order) to my document type. Assingnment of delivery type thru
spro>MM->purchasing>purchase order->set up stock transport order--->assign delivery type and checking rule....
2) MvT - 161----If i modify 161 wrt to GR Returns what modification is needed ? ......
3) VOV6 - I had checked it ,maintain it, but that is not relavant in my case....
4) During PGI system pick 161 as defalult MvT.....can we change it t0 122 ? but how...??
still the problem is there......
Sachin

Capital goods, during vendor return, Excise is getting post to RG23A instea

Hi SAP Guru,
I have very critical issue to be resolved immediately in the area of Excise for CAPITAL GOODS, please help! The things is....
1. At GR level using mvt 101, system is posting all BEDECSSECess to correct RG23C register, fine
Quality people have rejected goods, when Im trying to create vendor return delivery using......
1. GR (122) >J1IS>J1IV, using this process system is posting BED+ECS to RG23C but SECess to RG23A, I wanted to know why SECess is getting post in RG23A instead RG23C. plz suggest if any config. chages to be done.
Or
2. When I am trying GR (122) along with all Excise parameters using enjoy MIGO( Return Delivery), system is throwing error "RG23C-AT1 amount 1600.00 is greater than the available amount 0.00". When I checked the relevant register I found out enough balance.
Or
3. After GR (122), when Im using J1IH(JV) method, system is throwing error like " Balance in transaction currency 'Message no. F5702'.
Now plz suggest the correct answer!
Thanks & Regards
Manoj K Singh
+91 9777299580

Hi Gurus ,
I hope you must be doing greate, steps are as follow which i'm following for vendor return and subsequent delivery for capital goods.
1. PO -> MIGO (101) -> Excise capute & Posting using J1IEX -> MIRO.
For excise, part1 & 2 to relevent register posting has taken placed.
Now quality dept. has rejected the goods, for which vendor delivery should take place.
2. For Vendor return Delivery
MIGO 122 w.r.t GR of 101-> Excise capute & Posting using J1IS&V.
For excise, part1is getting created using J1IS, J1IV is creating part 2, in Acct. doc. RG23C BED/ECS/HEC is being Credit and "PLA On Hold" is being Debited for BED/ECS/HEC amount.
3. For Vendor subsequent delivery, I have done the excise config. for Movt. 123 .
MIGO 123 w.r.t. GR of 122.
While doing GR for 123, system is not generating Excise screen.
any way ,After GR of 123, I have Capture Excise Invoice after inputting all relevent data, but while Posting, System is generating message that Part 2 is does not exist for vendor excise invoice.
Now i thinks my requrement is visible for your understanding to suggest me some valuable idea to resolve this issue.
if possible can plz drop a test mail to hksiva.manoj at gmail dot com for further consultation.
Thanks & Regards
Manoj K Singh

Vendor return Excise error

Hi Gurus,
While creating the MIGO for subsequent supply Movt. 123 with reference to vendor return122, system is not able to create Excise part 1 entry.
Becouse of this reason i am not able to post vendor excise invoice.
Gurus can you plz suggest some idia or solution so that system should generate part 1 entry during MIGO for subsequent supply Movt. 123 with reference to vendor return122.
Full point will be awarded.
Regards
Manoj K Singh

Hi Gurus ,
I hope you must be doing greate, steps are as follow which i'm following for vendor return and subsequent delivery for capital goods.
1. PO -> MIGO (101) -> Excise capute & Posting using J1IEX -> MIRO.
For excise, part1 & 2 to relevent register posting has taken placed.
Now quality dept. has rejected the goods, for which vendor delivery should take place.
2. For Vendor return Delivery
MIGO 122 w.r.t GR of 101-> Excise capute & Posting using J1IS&V.
For excise, part1is getting created using J1IS, J1IV is creating part 2, in Acct. doc. RG23C BED/ECS/HEC is being Credit and "PLA On Hold" is being Debited for BED/ECS/HEC amount.
3. For Vendor subsequent delivery, I have done the excise config. for Movt. 123 .
MIGO 123 w.r.t. GR of 122.
While doing GR for 123, system is not generating Excise screen.
any way ,After GR of 123, I have Capture Excise Invoice after inputting all relevent data, but while Posting, System is generating message that Part 2 is does not exist for vendor excise invoice.
Now i thinks my requrement is visible for your understanding to suggest me some valuable idea to resolve this issue.
if possible can plz drop a test mail to hksiva.manoj at gmail dot com for further consultation.
Thanks & Regards
Manoj K Singh

Vendor return Excise Invoice through J1IS in foreign currency

Hello Experts.
Scenario is like:
We have two group company which are 100% EOU . and we have inter company process.
Plant A used to invoice to Plant B in Foreign current e.g. in EUR.
In case of any rejection, Plant B need to raise return Excise invoice through J1IS.. but the problem is that , In J1IS we can raise invoice in INR only. But the requirement is like Plant B also need to raise Excise invoice in same currency i.e EUR.
Is there any method or process through which we can raise return excise invoice in Foreign currency.
Ashwani

Hi Amit:
As we have two EOU unit . one EOU unit use to sale material to another unit as export sale. and do billing in EUR.
Suppose i have to return few material back to first EOU unit, than vendor return Excise invoice should be in EUR as it was billed to me in EUR.
Ashwani

Vendor Return Delivery through Quality Notification.

Hi Experts,
I m doing vendor return delivery through quality notification with action box , after giving PO NO. & Material document no we are getting the following error
1) Could not create return delivery
2) Deficit of PU IR quantity 2.000 EA
For the GR based IV reversal after IR tick is not active.
Kindly suggest possible reason for the same
Thanks & Regards
Rajesh

Hi
There is deficit of Quantity i.e the quantity lying in stock is less than 2. and secondly for GR based invoice verification the IR tick should be there in PO in Invoice tab.

BAPI for creating Return delivery to vendor using transaction MIGO

Hi All,
         My requirement is to create Return delivery to vendor using transaction MIGO.
In MIGO transaction to create return delivery, the following steps needs to be followed.
i) Select the option A02 Return delivery, R02 Material document,
    Enter Material document xxxxxxxx.
    Reson for movement:xxxx
    By selecting the option item ok and via delivery check box, then save.
After saving return delivery needs to be created.
Is there any BAPI/FM exist for this requirement?
I made lot of search in sdn, but i could not find any thing helpful.
Appreciate quick help.
regards
surya

Hi
In VL02n->Extras->Delivery Output->Header
Check if you see any message type (LD00 ?).
If you do not see any, insert a message type LD00.
If you want to check the IMG settings, see Txns : V/71 (for delivery types RL/RLL) and V/73 (for Item category RLLN)
Best regards
Ramki

Return Goods to Vendor (Vendor return)

Dear all,
Kindly explain me the step by step procedure of returning goods to the vendor, there could be many scenarios like mentioned below ---
1) GR Still NOT done
2) GR is done but lying in quality stock/storage because of poor quality
3) Material has been issued to production for consumption, there it was found that NOT in usable condition
4) GR as well as IV is already done,now i want to return material back to vendor
5) GR,IV as well as payment is done,now i would like to return the goods back to vendor
Kindly guide me how to return the material back to the supplier in all the above scenarios and also kindly explain me why do we need to return the material some times through delivery process?
For all the above scenarios,guide me how to return through MM cycle.
Thanks & Regards,

>
shruthirai wrote:
> Dear Pankaj,
>
> Thanks for the reply. Can you pl explain how to reverse/cancel the excise invoice in each case,kindly explain to me in steps with T.codes. Also i would like to know in which scenario we go for creation of Return PO?
> Kindly guide me.
>
> Thanks & regards,
1) GR Still NOT done
2) GR is done but lying in quality stock/storage because of poor quality
For above cases
Defintely stock should be received in physically/stores,after quality inspection only,it will returned.So stock should be
goods receipted in SAP as quality stock later put stock to blocked from quality,before/while doing
vendor returns release blocked stock to unrestricted to seperate storage location(create a new location for returns)
SAP Process
1. Create return delivery using MIGO(122 Mvmt) with reason for movement
2. Reverse excise using J1IS for returned material document,material document type - 'MATD',Series group,
excise group,year,vendor.In invoice screen,enter qty, assesable value(material p.o price).Carefully enter/calculate
excise duties for returned quantities only.Check for excise accounting enteries and post it.
3) Material has been issued to production for consumption, there it was found that NOT in usable condition
4) GR as well as IV is already done,now i want to return material back to vendor
For cases 3 & 4.
Move stock immediately to rework location,Bring material for quality inspection,transfer stock of material to its immediate
or its child material(using QA32) as per BOM.Material taken for production,hence invoice should have been done.
So adapt below process as below
1. Create return purchase order(tick mark vendor returns next to info record field)
2. Do migo w.r.t p.o check mvmt type - 161,enter qty,batch,reason for mvmt,delivery note no's
3. Reverse excise using J1IS(as explained for first 2 cases)
4. Create credit memo for vendor to reduce liability using MIRO(simulate for accounting entries)
5. Print credit memo document using MR90(Configure message output settings in SPRO)
5) GR,IV as well as payment is done,now i would like to return the goods back to vendor
Cancel payment document using FB08,void cheque,Follow steps for cases 3&4.
Hope this answer will solve your requirements.

Vendor Return Delivery Process

Dear All,
Kindly listout the process of Vendor Return Delivery for the Subcontracting Purchase process...
Scenario:
MIGO (GRN) qty : 4 EA (Main material) (sub contracting challan reconciliation done for the full required sub materials)
Reworkable Qty: 1 EA (Found by Quality)
Return Delivery : 1 EA (in Movement type 122 through QM side so that the Main material only will remove from our stock)
Now while sending this return delivery Main Material to the Sub contractor what could be the official document will be sent
along with.
Regards,

Hi
This one defective item has to be sent to subcontractor for rectification .. right !!!
You have to again go for subcontracting cycle .... Here BOM will be recursive .... Vendor most probably will do it for free ... so u have to go for free PO or just put say 0.01 as amount. .... do MB1B 541 ...create a subcontracting challan....do GR and reconcile the challan ....
Now the catch .... how to differentiate rework material ....
You can create a new PO doc type ... as "JW or SC Rework" ... Create rework PO in this doc type ...

Vendor return material (urgent)

Pls guide me Vendor return Business Process.
What I know:- eg I do the GR for 10 Nos. of any material, Then IV will be done. But some reason Management is decide that 5 Nos. of material has been return to vendor. then I made a PO for Vendor Return. then Done GR to Movement Type 161. Material is exciseable. On the time of GR Part 1 is posted & before IV Prat II also posted. then how cancel these documet. I use J1IEX What doc. no. we Put there PO for return vendor or GR no when posted for return.
Pls guide me

Following is the correct process
Return PO, Tick return material option
MIGO with Mvt type 161
Then Go to J1IS transaction and put this material document number. against trans MATD.No need to do j1iex
follow thios process.
Regards
Kedar Kulkarni

Vendor return process for consignment stock not yet own by you

Hello guru,
I need some help from you on the following type of vendor return.
We receive vendor consignment goods into our warehouse and we notice we would like to return back to the vendor after several defects
defect were spotted few month later, how to execute vendor return like this given that the stock still own by the vendor
in accounting perspective?
Should I just create another PO and flag the return indicator and perform a movement 161 in MIGO? Is this method workable way
of doing this?
What if we need a delivery document to be generated after 161 movements is posted in MIGO?
Appreciate it.
Tuff

Hi,
   The vendor consignment stock has no accounting impact till the stock is issued to own stock or consumed (411K or 201K movement).
   Standard SAP recommends to use direct return delivery using 122 movement in MIGO to return the consignment stock material back to vendor.
   If you still wanted to proceed with return PO, then maintain the message ME640 as warning message (W) in the path: OLME - Environment Data - Define Attributes of System Messages - System messages. Now, create a return PO and create GR against the return PO.
   If you want proceed with SD route for returning to vendor, refer the thread: Return PO with Text material shipping tab
Regards,
AKPT

Vendor return delivery form Quality Management on inspection type 08

Dear all.
I have a query regarding vendor return delivery. The issue is on a transection when one of our user has wrongly post the material to restricted stock after rejecting it on an inspection lot (Orign 01), that actually has to return to vendor and lot is the second return delivery to vendor on the same P.O. and line no.
To correct this i have done a transfer posting and transfer the material back to quality inspection by using movement type 322. Now i have an inspection lot with 08 orign but this time the system is not allowing me to post a return delivery and showing "PU Qty deficit" error.
Any one has any idea! please advice.
I am very thankful for your help.

Dear Tahir,
Have checked the scenario and is working fine, I think there is some i found in your 3rd communication in this thread. Gajesh has given you right path, you are trying it differently so there is a error. Just do following and revert back:
You have applied 08 insp type and lot i generated again and you have posted it to block stock correct no??? and you have already removed 08 type now fine.
Now go to migo >> *select return delivery against original material document, put reason for movement and select stock type as block stock * and post the document.
You were trying to do reverse GR instead of return delivery hence system was not allowing, pl check and revert it works 100%.
Shekhar

Vendor Returns through MIGO

Similar Messages

Maybe you are looking for