Vendor's/manufacturer's QM system only valid to 06.05.2010

Hi Team,
Please help how to correct following error.
Vendor's/manufacturer's QM system only valid to 06.05.2010
Message no. QB301
Diagnosis
The quality assurance system of the chosen vendor/manufacturer is no longer valid. You cannot, therefore, order the material concerned from this vendor/manufacturer.
Thanks

Hi
Check Quality Info record for the material-vendor-plant in tcode QI02. Check the date entered in the tab Insp control.
Either Existing QM system date is past or Vendor's QM system date is past.
If vendor's QM system is past, change the date in vendor master.
regards

Similar Messages

Vendor's/manufacturer's QM system validity

Hi Team,
How to increase Vendor's/manufacturer's QM system validity date?
ERROR: While creating PO is as below.
Vendor's/manufacturer's QM system only valid to 06.05.2010
Message no. QB301
Diagnosis
The quality assurance system of the chosen vendor/manufacturer is no longer valid. You cannot, therefore, order the material concerned from this vendor/manufacturer.
Thanks

It seems vendor/Material QM info record date is past .Go to transaction QI02 ,Check the date in inspection control tab and change the date to valid date.

Vendor's or manufacturer's QA system inadequate

Hi Gurus,
When i am trying to create Purchase Order with the QM active for that material, system gives me the following error,
Vendor's or manufacturer's QA system inadequate. I have gone through the similar thread but it gives the solution for the material whose QM is not active but in my case QM is active. Guide me if i am missing some process.
Thanks,
Deven

Hi
Vendor's or manufacturer's QA system inadequate
this error is due to
You have maintained QM view--> target QM system.
Say ISO :9001
But in QI01 -->Qinfo record you have maintained existing QM sytem say ISO 9002
or
In vendor master you have maintained some other QM system
If there is difference in Vendor master or QM view & QInfo record ...then while creating PO this error will occure.
Maintain same QM system or remove.
Regards
Sujit

Captureing Vendor And Manufacturer Details in PLD

Hello All,
I'm working on PLD for Outgoing Excise Invoice. My Client wants to capture Vendor and Manufacturer details like address and Excise details in PLD. Please help me, wheather its possible to capture this details in PLD.
Thanks,
Pratheeviraj.

Hi Pratheeviraj
You cannot "capture" information in the PLD. The PLD is a reporting feature that allows for changing layouts. Therefore the information the PLD will use, must be defined already in the system and be available to the PLD. I am assuming that you mean you want to add extra information in the layout, if this is so, you can add fields to the layout that are of type database and link to the necessary fields.
The fields will only work if they can relate to another field in the same area. For example, if you have an item code as a field in the rows, then adding the manufacturer from the OITM table will be possible as it will relate to the item code.
My only question will be what the manufacturer and vendor information is that you are referring to. Is this information in standard SAP fields, or user defined fields, or user tables?
Let me know what the source of this information is and we can guide you better on adding them to the PLD layout.
Kind regards
Peter Juby

*Journal Entries while uploading the vendor master data from legacy system*

hi SAP Folks,
can any one of you tell me the journal entries while uploading the vendor master data from legacy system to SAP system.
Eg: legacy system is having 10000 vendors list, 1 reconciliation account and $ 1000000. while uploading all these data from legacy system to SAP what are the journal entries we get.
thanks in advance.
Edited by: ravindranath manikonda on Nov 24, 2008 1:12 PM

Hi
you will be having only one entry logically
i.e. Opening Bal. clrng A/c Dr.
To Vendor A/c Cr.
regards

HT5030 whem installing itunes i get this message "this installation package could not be opened. Verifiy that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package"

whem installing itunes on my mums new computer which is windows 7 i get this message everytime "this installation package could not be opened. Verifiy that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package"

Let's check your Windows system.
1. Have you done all the important windows updates and service Packs on your system. If not do it now. START button, type in Windows Update and ENTER. Select 'CHECK FOR UPDATES'
2. Let's check your Windows system files for possible file corruption
SCAN and repair possible Windows system file corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
3. Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

ORA-01139: RESETLOGS option only valid after an incomplete database recover

Hello All,
Can anyone please tell me what could be a reason of this error.
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery
SQL> ALTER DATABASE OPEN RESETLOGS;
ALTER DATABASE OPEN RESETLOGS
ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery
Regards
Vinay

Hello Aman,
Sorry couldn't give all information in frustration.
Oracle version is 9.2.0.1.0 running on Red Hat 4
Actually i did TPITR and have to open database with resetlogoption recovery was successful but while opening received this error.
Database dismounted.
ORACLE instance shut down.
SQL> STARTUP NOMOUNT PFILE=/oracle/prdtpi/pfile/prdtpi;
ORACLE instance started.
Total System Global Area 798040164 bytes
Fixed Size 454756 bytes
Variable Size 478150656 bytes
Database Buffers 318767104 bytes
Redo Buffers 667648 bytes
SQL> alter database mount clone database;
SQL> RECOVER AUTOMATIC DATABASE UNTIL CHANGE 3997955 USING BACKUP CONTROLFILE;
ORA-00283: recovery session canceled due to errors
ORA-00264: no recovery required
SQL> alter database datafile 1 online;
Database altered.
SQL> ed
Wrote file afiedt.buf
1* alter database datafile 12 online
SQL> /
Database altered.
SQL> ed
Wrote file afiedt.buf
1* alter database datafile 13 online
SQL> /
Database altered.
SQL> RECOVER AUTOMATIC DATABASE UNTIL CHANGE 3997955 USING BACKUP CONTROLFILE;
Media recovery complete.
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery
SQL> ALTER DATABASE OPEN RESETLOGS;
ALTER DATABASE OPEN RESETLOGS
ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery

Your account is only valid for purchases in the USiTunes...

"Your account is only valid for purchases in the US iTunes store. Clicking will take you to this store"
First... I don't want to go to that store. I want the German store.
I get the above message whenever I try to buy or download anything from iTunes lately. As far as I can tell, all my addresses are set up for Germany where I live and I'm doing it German (language) but something is continuing to trick iTunes into thinking that my account is U.S. based.
Guess that leads to another question... do I need to have a U.S. account and a German account? If so, when did this B.S. start? Why does it matter where I am, especially if I want to buy a program or download a free one?
Anyway, I'm obviously aggrivated about this.
Thanks for any help. Also, I tried searching the forums but couldn't find a thread.

With further searching I FINALLY got through Apples stupid billing/location system and got myself placed in Germany. Now, everything works well. I still think it's way overcomplicated having 3 or 4 different places to change addresses. Why not do one with a pull-down country system and leave it at that?

Locking specific Vendor and Manufacturer combination in table QDQL

Hi All,
I want to modify few entries (i.e: specfic Vendor and Manufacturer combination ) in table QDQL
and before it i want to lock that specific entries only ( i.e: specfic Vendor and Manufacturer combination )
Any pointers will be highly useful.
Regards
RAHUL
Edited by: RAHUL SHARMA on Jul 18, 2011 4:18 AM

Experts,
Please respond if post is not clear then let me know.
Regards,
Kumar.S

Error message when installing iTunes on my PC: This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows installer package

Error message when trying to install iTunes on my Pc:
Using Windows 7, had to replace hard drive. HELP!!
This installation package could not be
opened. Verify that the package exists
and that you can access it, or contact
the application vendor to verify that
this is a valid Windows installer package

Hello JAH1961,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

I am trying to download iTunes to my Sony PC, but "This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer Package."

mI am trying to download iTunes to my Sony PC, but I keep getting the following error after initial download attempt:
"This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer Package."
I have Windows 7 Home Premium, Service Pack 1.
Any help is greatly appreciated.

Hi gump68,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful if iTunes is not installing on your PC:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
All the best,
Jeremy

When i try to instal itunes on pc i get this message. This installation pack could not be opened. Verify that package exists and that you can access it or contact application vendor to verify that this is a valid windows installation pack. HELP

when i try to instal itunes on pc i get this message. This installation pack could not be opened. Verify that package exists and that you can access it or contact application vendor to verify that this is a valid windows installation pack. PLEASE HELP

Hello annesmith1954,
Thank you for using Apple Support Communities.
You can use the information in the following article to troubleshoot your installation issues with installing iTunes on your PC.
"Could not open key" message when installing iTunes or Apple components for Windows
Regards,
Jeff D.

I need to change from Japan App Store to Australia App Store. I get this every time I try using My MacID: "This Apple ID is only valid for purchases in the Japanese iTunes Store. You will be switched to that Store." What next TY. JohnCahill

I moved from Japan to Australia. I need to change from Japan App Store to the Australian App Store. I get the following message every time I try using My MacID which was set up in Japan: "This Apple ID is only valid for purchases in the Japanese iTunes Store. You will be switched to that Store." At one point... by which path I do not remember... I was instructed to created a new ID. I fill out the new ID forms, but the address is rejected each time... quite confusing. Does it want a new name? But it says I cannot use an apple domain (tag?) even though I guess it has to be an apple address... ? So I have iTunes crdit cards purchansed in Australia, can't spend in AUstralian iTunes Store, get directed back to Japan each time, and can't open a new ID... What am I doing wrong? Thank you in advance. John. Australia.

You must have a separate Apple ID registered in the other store along with a valid bank-issued charge card in the other country, and a legal billing address in the other country.
Sorry... But... You cannot use other countries itunes stores.
You must be within the Country with a Valid Billing Address and Credit Card for that Country to use the iTunes Store of that Country..
iTunes Store Terms of Service
http://www.apple.com/legal/itunes/us/terms.html#SERVICE

This installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package

this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package how can i istaller itunes in my laptop windows 7 64 bits

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"

While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Vendor's/manufacturer's QM system only valid to 06.05.2010

Similar Messages

Maybe you are looking for