Vendor Search Issue in XK03

Hi Gurus,
We have few vendors created in RU (Russian Language ) language . When we try to search the vendor by name in XK03, system is unable to search the vendor. Is there any language installation required to resolve this issue.
Please advise.

source: SAP International Address Versions:
Searching for Address Versions
No search help is delivered for address versions in the SAP standard. You therefore have to create your own search help for this and add it to the relevant SAP standard search help.
To do this, proceed as follows:
Creating a Search Help
1. Go to transaction SE11. The ABAP Dictionary: Initial Screen is displayed.
2. Select the Database Table checkbox, enter ADRC in the adjacent field and choose Display.
3. Find the names of the fields you require in the Short Text column and make a note of their actual field names. The fields normally required are the client, address number, customer/vendor/bank number, and nation.
4. Repeat steps 2 and 3 for the specific application table to be used, such as KNA1.
5. Go back to the ABAP Dictionary: Initial Screen and select the View checkbox. Enter a name for your search help in the adjacent field and choose Create.
6. In the subsequent dialog box, select the Database View checkbox and choose Copy. The Dictionary: Maintain View screen is displayed.
7. Under Tables on the Tables/Join Conditions tab page, enter the names of the tables used above.
8. In the Join Conditions frame, enter a field name from the first table and its corresponding name from the second table used, for each field required.
9. Enter a short text for your search help and choose Save.
10. In the subsequent dialog box, enter the required development class and choose Save.
Adding a Search Help to an SAP Standard Search Help
11. Go back to the ABAP Dictionary: Initial Screen and select the Search Help checkbox. In the adjacent field, enter the name of the relevant collective search help delivered by SAP in which your search help to be included, for example DEBI2. The Dictionary: Display Search Help screen is displayed.
12. Choose the Included Search Helps tab page and enter the name of the search help you created above in the Search Help column and the corresponding short text. Choose Save.
Result
Your own defined search help is included in the list of standard SAP search helps and you can now use it to search for an address version.

Similar Messages

Sharepoint Server 2013 Search Issue

Hi,
running Sharepoint server 2013. search service application is not working properly. getting the below error message.
"Unable to retrieve topology component health states. This may be because the admin component is not up and running"
we have 2 tier sharepoint 2013 farm architecture. please find the below server details.
1. WFE & APP server (OS: Windows Server 2008 R2 SP1 and RAM: 8 GB)
2. database server (OS: Windows Server 2008 R2 SP1 and RAM: 8 GB)
I tried the following:
- installed the latest sharepoint server 2013 CU.
- OS is up to date.
- deleted and recreated Search Service Application
- The service account does have access to the search databases
- one account is used, domain\sp2013search, has all necessary permissions
Please help to fix the search issue.

Hi Raj0639,
According to your description, my understanding is that you got an error when you run SharePoint 2013 Search.
Firstly, please make sure that all servers are online, and connecting to others.
Please stop all search services on Manage services on server, then restart them. Please try to do as Amit said, compare the result.
If this issue still exists, please repair SharePoint 2013 under Control Panel, then compare the result.
Here is a similar post for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/a67b0d0f-4f5a-4412-8f83-a57eaff4be45/sharepoint-search-host-controller-does-not-start?forum=sharepoin
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Does the 10.5.7 update address command+f finder search issues?

Does the 10.5.7 update address command+f finder search issues?
Search has been horrible under 10.5 in that it does not reliably find FOLDERS on network drives, only file names.
Even when I am looking directly at a folder and I search for it will not appear in the command+f window.
Also the stupidity of not allowing a specific search location.
Has this been addressed? I have, at any given time, 3-4 mounted servers.
I do not have a choice now to search a specific hard drive.
10.4.11 gave me the option under "OTHERS" to select a specific place to search.
The only choice I have in 10.5.2 is "SHARED". Which searches all drives when I only want to search one. Nor do I have a choice of searching just one of my two internal drives.
I talked with Chris in apple engineering several months ago, who acknowledged that search problems are a known issue under 10.5 and this was being addressed but have not heard any more. I don't want to download an update unless these broken search issues have been fixed. This is a production machine and I cannot have downtime in the Dept.

Have you filed a bug report or enhancement request with Apple?
http://bugreport.apple.com/

Vendor search with CNPJ number

Hello all,
We are in SAP SRM 5.0 Server 550 system with ECS.
Recently we went live with Brazil, now there is a requirement that the users while creating SC want to select vendors based on CNPJ number (Legal tax number - In vendor master is Tax number 1 ).
So the vendor search criteria should include CNPJ field. Can you suggest possible ways of achieving this.
CNPJ number is getting replicated in SRM.
Rgds,
Madhan

Sorry for the delay in responding to your question. I talked to one of our search experts and he told me that most part numbers are searchable, as long as you are in the library that contains the part number. Alternatively, you can search for docs based on their part number n the Oracle Store.
Each book that is published using the standard Oracle procedures goes into a directory hierarchy on download.oracle.com. In your example, the URL for the table of contents would be:
http://download.oracle.com/docs/html/A75388_03/toc.htm
However, that URL gives a "page not found" error. So I suspect that the book either was published so long ago that it wasn't transferred over to the download server.

Vendor Search Help

I have a user that is requesting that Vendor PO Box and PO Box ZIP Code be added to the Vendors by Address Attributes tab in the Vendor search help screen.
Any ideas with where to start?
Thanks!

Hi Barth,
That was over an year ago. I hardly can remember what I had for lunch yesterday. Well, actually yesterday is easy because I have Mexican every Sunday.
Anyways, try setting a break point in the FM I mentioned. It shouldn't be too hard to debug. And it will answer two questions, if it is actually where the vendor is being fetched, and what is going on.
If all else fails, open a new thread explaining what you've done and what the results are, as this topic has been closed.
Good luck.
Best,
Bruno

Vendor Search Control

Hi,
In the vendor search drop down when trying to list vendors, is it posiible to restrict only certain vendor groups can be view by certain users?
Thanks,
Teo

Hello,
Please refer below threads:
Authorization check on standaerd sap search help
How to implement search help exit
Code for Search Help Exit
http://help.sap.com//saphelp_470/helpdata/EN/cf/21ee52446011d189700000e8322d00/content.htm
Thanks!
Raju

Additional Dynamic Selection criteria for Vendor-Search Tearm 2

Hi All,
I need to incorporate additional dynamic selection criteria which references 'Vendor-Search Term 2' in new Z Transaction which is a copy of Transaction S_ALR_87012086.
help me out how to proceed.
Full reword points will be given.

Hello Chetan,
have you checked note 79166 "MM-SRV Hint: Vendor evaluation for service"?
Define an evaluation criterion for services in Customizing of the vendor evaluation to be able to use the vendor evaluation also for the services management.The main criterion must contain the determination methods 'C' (determination from the quality valuation of the service) and 'D' (determination from the timeliness rating of the service) in the sub-criteria.
Kind Regards
TomT

Sorting problem in standard vendor search help

Hi all,
I'm enhancing the vendor search help.
I found that there is a sorting problem in the original standard search help.
The 1st time to search vendor in the search help returns a correct list, then I just sort the vendor in ascending order. This time the column name of the hit list changes and mismatch the actual values.
Any one faced this problem before?
What's wrong are there ?
Thanks.

Thanks Peluka.
But even I don't enhance the vendor search help, I still found that the original standard version has this problem after sorting.
Is that the program bug?
Have anyone encountered this problem before?

Using Trex for Vendor Search in SRM

Experts,
Please let me know if you used TREX to optimize the vendor search in SRM 7.0, ECC 6.0 EP4.
Please let me know any tips or suggestions regarding the implementation.
Thanks in advance
Regards,
Scott

Hi Scot
the below is for goa . try for BP too.. Why you require TREX search . std search dont enough. since
TREX helps only if you want to enable full text search for long texts and attachments in contracts.You need to instal the trex server and configure the settings:-
1.create RFC destination of type TCP/IP server using TCODE SM59
2.MAINTAIN ENTRY IN back end systems settings
3. Activate full text search y executing the program BBP_TREX_INDEX_ADMIN .
bUSINESS oBJECT : - bus2000113
subtype usiness object :- cc for GOA or blank for operational contracts
Action for SRM TREX index :- select the appropriate value from search help . for example , you would specify A for the initial index generation.
bundle size for indexing : enter "10." bundle size affects performance. The size indicates the number of docuemnts that will be updated in one pass.if there are a large number of documents, then the size may be reduced to improve performance

Display list for Vendor search in SC tcode in SRM 7

Hi all,
We are on SRM 7.1 ECS.
THe vendor search help display list in SRM 7 in the SHOP in 1 STEP tcode displays number of columns like VENDOR ID,name,street,city etc...IN SRM 5,there were only limited number of clumns(around 6) displayed like vendor ID,name,Porg,DUNS etc.
I know in SRM 7,we can right click and always chnage the USER settings for each individual session/user.BUt if I need to craete a default display list for the vendor serach in the SC transaction,is that possible?
Also if I modify the web dynpro application to limit the no of culmns,then changes will be displayed in all the trasnction sin which the vendor search help might be used.
Users in our org have problemw when scrollingtop to bottom in the result list which is displayed for the vednor seaqrch due to the new web dynpro UI in SRM 7 and hence the query.
Any suggestions will be highly appreciated.
Thanks in advance for your time.

Hi Scot
the below is for goa . try for BP too.. Why you require TREX search . std search dont enough. since
TREX helps only if you want to enable full text search for long texts and attachments in contracts.You need to instal the trex server and configure the settings:-
1.create RFC destination of type TCP/IP server using TCODE SM59
2.MAINTAIN ENTRY IN back end systems settings
3. Activate full text search y executing the program BBP_TREX_INDEX_ADMIN .
bUSINESS oBJECT : - bus2000113
subtype usiness object :- cc for GOA or blank for operational contracts
Action for SRM TREX index :- select the appropriate value from search help . for example , you would specify A for the initial index generation.
bundle size for indexing : enter "10." bundle size affects performance. The size indicates the number of docuemnts that will be updated in one pass.if there are a large number of documents, then the size may be reduced to improve performance

I don't know exactly when this started, but Winamp became my default search and homepage.. The homepage issue was easy, but the search issue is bigger than I expected. It ALWAYS uses Winamp (Powered by AOL) as my default search. Please help. Thank you.

I don't know exactly when this started, but Winamp became my default search and homepage.. The homepage issue was easy, but the search issue is bigger than I expected. It ALWAYS uses Winamp (Powered by AOL) as my default search. Please help. Thank you.

reinstall it but make sure to uncheck the box next to "make winamp my default search engine"
attached is screenshot from the part of installation proces where that checbox should be unchecked
hope this helps

CSC Customer Search issue in Weblogic

We have extended the customer search in CSC for searching through "ProfileID" property.
This functionality is not working when the EAR is deployed in Weblogic.(Please find the error log attached)
But when the same EAR is deployed in jboss, its working.
Please help on this issue.
Error Log
<Error> <HTTP> <BEA-101017> <[ServletContext@43144004[app:Project-csc module:agent path:/agent spec-version:], request: Workmanager: default, Version: 0, Scheduled=true, Started=true, Started time: 47 ms
POST /agent/framework.jsp HTTP/1.1
User-Agent: Mozilla/5.0 (Windows NT 5.1; rv:15.0) Gecko/20100101 Firefox/15.0
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip, deflate
Connection: keep-alive
Content-Type: application/x-www-form-urlencoded; charset=UTF-8
Referer: http://localhost:7003/agent/main.jsp?_windowid=2
Content-Length: 7485
Cookie: atg.allwindows.lastrequest=1357124645500; JSESSIONID=XjfJQkPS1Jv1plngypdKk1y3bDW2wnyykxp4jty9J9L0TLHdgj7z!1285435330
Pragma: no-cache
Cache-Control: no-cache
]] Root cause of ServletException.
java.lang.NullPointerException
at atg.core.util.StringUtils.makeList(StringUtils.java:1309)
at atg.core.util.StringUtils.makeList(StringUtils.java:1262)
at atg.search.routing.command.search.Field.getNamesString(Field.java:175)
at atg.search.routing.command.search.Field.getAttributeXML(Field.java:246)
at atg.search.routing.command.SearchXMLObject.getAllAttributeXML(SearchXMLObject.java:382)
Truncated. see log file for complete stacktrace
>
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Refer following thread
ATG10.1 CSC search issue | NullPointerException

Search issue with plurals?

RH9, webhelp, merged project.
Just reported to me and I can confirm: There seems to be a content search issue where the singular works, but not the plural, even if the plural is what we use. Specific example: Enhancement vs. Enhancements. We have several topics that are labeled or refer to "Enhancements", but searching with that term finds nothing, while using "Enhancement" finds those terms.
"Ticket" vs "Tickets" results in a similar issue. The behavior appears to be that the singular form can find either version - singular or plural - but plural search terms result in no matches at all.
Any ideas what may be causing this?

Are you testing on the published help or the generated help. The latter is rebuilt every time.
Try in one of the sample projects. Click Open on the RoboHelp Starter page and then click Samples in the ribbon on the left.
If that works, try downloading the demo merged help from my site and generate from that. Test that works.
Post back with the results at that point.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Search Issue ... URGENT

i have a search issue :-
1. user logs in to the site and enters 'opadry' in the search field.
2. the search retrieves the required results.
3. but the result page shows the 'Administration' and 'Navigator' links on the top right of the page.
4. through these links the user can go to the forms, reports etc at look at them at design time.
5. how do i prevent this ? because i do not want the users to see these links.
has anyone had these problems ?
any help would be greatly appreciated.
thanx a lot.
null

I remember seeing the reply somewhere. Pls check the archive. I present version it is not possible.

Vendor Search F4

Dear Experts,
In search (F4), can we display only unblocked vendor in trannsaction like fk03, fbl1n etc.
i.e. at the time of vendor search through F4 search result should not display blocked vendors.
Is there any trick to do this?
Thanks in advance.
Regards
Mahesh

One of our searches on the tabs is 'B Vendors not blocked (by address attributes)'. Not sure if this is a SAP standard search tab or was created by our Partners. It is this tab which comes up as the default search tab when looking for vendors (hitting F4). Therefore blocked vendors are excluded automatically.
If a Vendor is blocked and should not be used in the future, we also update the Search Term field in the Vendor Master Record (field SORTL) with the following:-
B 123456 - B and the correct Vendor number that should be used in the case of duplicate vendors
BLK 4 DEL - in the case of Vendors who have been created in error or were migrated and never used
BLOCKED - Vendors used, but may not be used in the future
This means which ever search tab is used, SAP users can easily see which Vendors are actually blocked or not. It also helps with duplicates and you can see quickly which vendor should actually be used.
Hope this helps.
Edited by: Amanda Byrne on Apr 22, 2010 9:43 AM

Vendor Search Issue in XK03

Similar Messages

Maybe you are looking for