Vendor transfer from mm to sus and ebp to sus

Hi,
I have two scenarios.
1. Plan driven procurement
2. mm-sus scenario
For plan driven procurement I have transferred the vendor from r/3 to ebp using bbpgetvd  and ebp to sus using xi.
Now vendor can login to sus and do the biding. But in case of mm-sus scenario whether I need to transfer the vendor again using we14? Please suggest how to proceed vendor transfer incase if we have bidding in sus and po display in sus from r/3 not from ebp.
Vendor can be the same for both the scenario.
1. Plan driven procurement - PO will be in EBP
2. mm-sus scenario - po will be there only in R/3
Regards,
Natchiappan.M

Hi,
I dont think vendor replication is needed. Did you try and test the MM-SUS scenario. Is there any error message that you are getting?
Regards
Azad

Similar Messages

  • How to transfer vendor master from MM to SUS?

    Hi friends
    How to transfer vendor master from MM to SUS
    Are the following steps correct
    1.create vendor master in MM
    2.use tcode BD14 in MM and enter partner system as SUS ( to send vendor master)
    3.use BD15 in SRM to accept the master data from MM.
    Please let me know if i am wrong
    Thanks
    Vinny

    Hi Vinny,
    Please follow below steps for transferring vendor master from MM to SUS.
    !) Create a vendor master in MM and assign class type ALV under enviornment-Classification tab.
    2)Go to BD14 and enter following fileds
    Vendor number
    Class
    Message type
    Target System...
    Before doing BD14 hope you have done all the partner profile configuraion as well as model view creation and mapping has been established between MM to XI to SUS.
    Before repliating vendor, please note that vendor root org unit has been created in SUS system.
    After executing BD14 then check in your mm system WE05 whether idoc has been generated and sent to XI system.
    If sent to XI system successfully then please check in SXMB_MONI t-code in XI what is status then finally check  in SUS.....
    If useful points please...
    Thanks
    Ravi

  • Automatic replication of vendor masters from SAP R/3 to EBP

    Hi
    For this issue I found the below program and steps to do the automatic replication of vendor master from SAP R/3 to EBP
    PROGRAM BBP_VENDOR_SYNC
    The program BBP_VENDOR_SYNC automatically synchronizes the backend vendors with the SRM system.
    To run the program BBP_VENDOR_SYNC, you first have to make the following settings:
    Path in the Implementation Guide (IMG):
    Supplier Relationship Management --> SRM Server  -->Technical Basic Settings -->Settings for Vendor Synchronization --> Make Global Settings
    Supplier Relationship Management --> SRM Server  -->Technical Basic Settings -->Settings for Vendor Synchronization --> Define Settings for Each Backend System
    Then you have to make the following settings in transaction SA38:
    · Enter program BBP_VENDOR_SYNC.
    · Click on the pushbutton Background.
    · Enter the report name BBP_VENDOR_SYNC.
    · Either define a new variant or use an existing variant ( The new Variant as Test Vendor)
    · Click on the pushbutton Schedule.
    · Enter the job.
    · Define the start date.
    · Either schedule once or schedule periodically. Then you have to define the period interval.
    I followed  the above mention steps and I am able to setup the Schedule on timely basis and the job was completed successfully, but the vendors are not replicated successfully .
    I am receiving the below error in transaction code SLG1.
    1.The Specified Node does not Exist in the Org. Plan(Message no. BBP_VENR006).
    2.No Vendor Replicated from Backend MD1CLNT(Message no. BBP_VENR017).
    Please check and advice.
    Thanks & Regards
    Sada

    Hi Sadasivam,
    Make Global Settings
    Use
    In Customizing for vendor synchronization, you define between which mySAP or ERP backend systems and the EBP System you wish to automatically synchronize the vendor master data. This setting is necessary in order to start a job-based execution of the synchronization, so that the vendor master data that is newly created or changed in the backend is updated regularly in the EBP System.
    Requirements
    You wish to use the automatic vendor synchronization functionality.
    In the Implementation Guide (IMG) activity Define RFC Destinations, you have defined the RFC destinations for your systems.
    Under Define Backend Systems, you have defined the backend systems for your systems.
    Activities
    Customizing for Vendor Synchronization consists of two parts. In the first part you make those settings that are valid for all backend systems. In the activity Make Settings for Each Backend System you can define or display detail data for the individual backend systems.
    Make Global Settings
    By setting the indicator Create New Vendors Also, you can determine that those vendors newly created in the backend systems are also newly created during the synchronization. If this indicator is not set, the only data updated is that of the vendors in the Enterprise Buyer System whose data was changed in the backend systems.
    Note:
    If you have not yet made an entry here, an empty screen appears when you start the activity. To make the settings, choose New entries or press F5.
    Further Settings:
    Carry Out Address Check for Duplicates :
    Organizational Unit in EBP for the Vendor
    Enter the eight-digit number, for example, 50001234.
    Vendor Number Assignment Type
    In the dropdown box, choose the method with which the number is to be allocated when a new vendor is created, for example, internal number allocation.
    Hope this makes you more clear. My mail i.d is [email protected]
    Rgds,
    Teja

  • Service PO transfer from MM to SUS

    Hi,
    We are planning to use MM-SUS scenario.
    1. Is it possible to transfer the service PO, service entry sheet, and Invoice from MM to SUS wih standard XI scenario.
    2. In PDP material scenario, is it possible to show the GR in SUS without ASN?
    Please suggest.

    hi nachiappan
    see this limitations notes from SAP on SUS
    SAP Note 700350 - Supplier Enablement: Deployment
    Scenarios integrating SUS
    1028264 Consulting solution: Additional function for
    982871 Consulting services: supplier integration in
    868192 Consulting solution: MM-SRV-SUS service procurement
    543544 SUS: Extended Classic Scenario for EBP not
    83020 What is consulting - What is support?
    i think it might possible in srm 7.0 service po to sus.
    https://service.sap.com/~sapidb/012003146900000197132008E/ECS_SUS_Consulting_Solution.zip
    br
    muthu

  • Vendor replication from ECC to SUS

    Hi Gurus,
    We are replicating vendors from ECC to SUS.
    The XML message is failing in the SUS side.
    The error is
    Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application
    Please find below SXMB_MONI trace
    <FAULT_TEXT>Error in XI interface: Exception occurredE:BBP_BUPA_SUPPLIER:089 -Unable to determine logical system of sender; check your data Program:
    It seems similar issue has been resolved in the below thread but there  is no mention of solution.
    ABAP Inbound Proxy Error !
    Please help in resolving the issue.
    With Regards,
    Malay

    Hi Malay,
    Kindly check if you have defined the logical system of SUS system under T-code SALE in your SUS client.
    Regards,
    Nikhil

  • How can you delete multiple emails at once I have 3000 on my brand new iPhone that got transfer from my I pad and they keep popping up in 50 every time I check my email from my yahoo account

    Delete multiple emails at once like 3000 that were transfer from my iPad to my iPhone and keep coming up in groups of 50 at a time?

    1) You asked "Does she need to reconnect to that itunes/computer and if so what do we need to do to remove this folder of pics from her ipod?" Yes, you have to connect the iPod to that computer and go to the Photos pane for the iPod in iTunes and uncheck sync photos and the click on synce/apply. In the future do not check sync photos.
    iOS and iPod: Syncing photos using iTunes
    2)
    Create a NEW account for using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    Then on the iPod go to
    - Settings>Messages>Send and receive and sign out your ID and sign into hers. Make sure that only her ID email address is listed.
    - Settings>FaceTime sign out of your ID and sign into hers. Make sure that under You can be reached at only her ID email address is listed
    - Settings>iCloud and sign out and sign in with hers
    Contnue to use the commpn ID/account for Settings>iTunes and App stores.

  • Vendor Transfer from ECC to SRM-EBP

    I want to transfer vendor from ECC to SRM-EBP.I tried the T code BBPGETVD. But I am getting the below log:
    "Error: Error while Creating Business Partner (BP) Module: BUPA_CREATE_FROM_DATA Vendor: 0000100011".
    Please suggest.

    Hi
    I have seen this error. However kindly check in SRM side
    In BP transaction 0000100011. Is this vendor is vailable or not.
    OR
    do some cosmetic change in this vendor in XK02 and when you run BBP_VENDOR_sync REPORT BRINGS you this vendor in SRM
    Muthu

  • Report on New vendor transfer from ECC to GTS

    Hi we have run the batch job daily basis to transfer new vendors from ECC to GTS system, my client want to know that list of the venodors(Business Partners) has been transfered today in GTS system on particular day to screening SPL. where i can see this, or any possible solution saying that get mail notification  to users - once vendors are transfered based on job batch runs.
    regards
    Satish

    Satish,
    You can see the log  in System Monitoring > Transfer logs for business partners or by executing the transaction:  /SAPSLL/PARTNER_APPL.
    However in order to see the required logs,  you need to  configure the  u2018Control Profile for Loggingu2019 in IMG.
    Hope this helps.

  • Cancelled a file transfer from folder to desktop and lost the folder?!

    Friend txt me asking for help with her mbp. She says she dragged a folder containing many photos from a destination to the desktop by mistake instead of dragging to a portable hard drive. She cancelled this transfer and now says the folder with her photos isn't in the original location and is nowhere to be found.
    How can I help her? Thank you!

    In a new Mac OS X user account.
    (61490)

  • Transfer from old computer (to and from iPhoto 08')

    So I want to transfer my old computer's iPhoto Library (which is '08) to my new computer with ilife '08. How do I do this so I don't lose my events and such? I don't want to use the migration assistant when transfering. I could use target disk mode on my old computer, but I am not sure how to import that old computer's iphoto library into the new computer's iphoto library. Thank You.

    CommanderK423:
    Welcome to the Apple Discussions. First rename the iPhoto library package on the old computer and then copy the entire iPhoto library package to the Pictures folder of the new Mac. Thendownload and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administrator login name, long or short, in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field. That will insure the ownership and permissions is set correctly for the new owner.
    Now download and run the paid version of iPhoto Library Manager. It will let you merge the two libraries while keeping the keywords, comments, titles and albums of both. It's the best option to do that. There is a free way to get the events from one library into the other and keep the comments, titles and keywords but it involves exporting each event from one library to a folder with the same name as the event and using the Include titles and keyword option of the export. Then importing those folders into the destination library. It can be done but is a lot of work.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • ITunes transfer from PC to Mac, and now no playlists!

    I just got a new MacBook Pro and transferred all my music from my old PC's external hard drive. But instead of restoring my library the .xml way, I did it the Add to Library way. Only now, all my playlists are gone! Is there any way to get them all back, or do I have to start all over again?

    You don't need to edit the .xml file or any file for that matter. All you need to do is to open iTunes. Go to File > Add to Library, it will open a window to locate your music. Select the songs, videos, etc that you want to add to iTunes. Also, iTunes will organise your iTunes media in the iTunes directory within Music (~Music/iTunes). So you would not need to manually copy the songs to the Music folder.
    For more details have read here - http://support.apple.com/kb/ht1451

  • All note have disappeared after transfer from 3GS to 4 and update...

    Any way to retrieve?
    Lost 30+ notes.  They do not show on either phone.

    I've just gone into Settings on the 3GS, and went onto iCloud
    I've gone down to Storage & Backup and turned 'iCloud Backup' ON
    then clicked 'Back Up Now' and it says its going to take about 2 hours,
    so im guessing its now backing up the Apps etc to iCloud?
    When the 2 hours is up, what will happen then?
    do I go onto Settings - iCloud on the iPhone 4
    or do I go on something on iTunes?
    All I want is everything from the 3GS on the 4,
    then I can sell the 3GS....
    I cant find anything on the 4 Settings to restore from this 3GS iCloud Backup though,
    am I doing something wrong?

  • Transfer from Mac to Windows and Downloading without serial number

    Hello,
    I have two questions:
    1-)
    Can I use CS5 on Mac and Windows interchangeably?
    If not, is there a way to use CS5 (CD version) which was purchased for Windows on a Mac?  If so, what do I need to do?
    2-)
    Can Adobe download Creative Suite to a new computer without the serial number if the product was originally registered?
    I recently moved from Korea back to America, unfortunately the movers packed my CDs by accident, and they won't be here for another two months. 
    Thank you for taking the time to answer me,
    Myriam

    1-)
    Can I use CS5 on Mac and Windows interchangeably?
    If not, is there a way to use CS5 (CD version) which was purchased for Windows on a Mac?  If so, what do I need to do?
    No.
    The Platform Swap process only applies to current versions of Creative Suite. The last ever current version of Creative Suite is CS6.
    2-)
    Can Adobe download Creative Suite to a new computer without the serial number if the product was originally registered?
    I recently moved from Korea back to America, unfortunately the movers packed my CDs by accident, and they won't be here for another two months.
    You can certainly download the software. You don't ever need your discs again for that. However, the software (disc or download) will only ever install as a 30 day time limited trial version until you enter a valid serial number.
    Thus you will always need your serial number for any re-install so you must keep it safe and handy.
    Try logging in to your Adobe account on the Adobe website and see if the serial number can be found there.

  • MM-SUS and EBP-SUS in the same client

    Hi experts
    I have a doubt about implementationMM-SUS and EBP-SUS in the same client, If I send a PO from MM to SUS and after send a PO from EBP to SUS to the same vendor, the vendor will be able to see 2 POs with just one logon?
    As I know when I replicate a vendor from MM to SUS a Business partner is created and when I replicate a the same vendor from EBP to SUS  a new Business partner is created and are diferent BP so a user and pass diferent .
    Thanks
    Nilson

    Hi Nilson,
    If i understand your scenario, you'll replicate an existing R/3 vendor to EBP. The vendor will be a direct vendor in R/3 while the same would be used as for Indirects in EBP.
    Well, when you replicate the R/3 vendor to EBP, the vendor has the R/3 link in the form of Backend Logical systen name in EBP.
    So when you replicate the vendor from R/3 or EBP, there will be ideally only one entry for the vendor with references to R/3 and EBP systems.
    Hope this clarifies your question.
    Cheers,
    Akash

  • XML message failing in the SUS side for vendor replication from ERP

    Dear Experts,
    We have configured MM-SUS scenarios in our environment of SRM 7.01/ECC 6 ehp 5.
    We are trying to replicate the Vendor master from ECC to SUS using PI ( idoc message ZCREMAS_SUS_MM)).
    The message is successully processed in the PI. It is failing in the SUS side.
    The exception is as below:
    An error occurred when deserializing in the simple transformation program /1SAI/SASF5486DA19E3520591A1B (Length of "123 JALAN TIMUR" exceeds maximum length "10", specified with tt:maxLength Kernel ErrorId: ST_CONSTRAINT_MAXLENGTH) XML Bytepos.: 607 XML Path: ns0:SupplierPortalTradingPartner(1)TradingPartnerOrganization(2)Address(8)HouseNumber(6) An error occurred when deserializing in the simple transformation program /1SAI/SASF5486DA19E3520591A1B Length of "123 JALAN TIMUR" exceeds maximum length "10", specified with tt:maxLength</SAP:Stack>
    Where I can change the settings to allow the maximum length  of 10?
    Any input will be highly appreciated.
    Thanks and regards,
    Ranjan

    Hi,
    Note 1510484 - SUS: Order longtext in message area displayed incorrectly
    Note 1559121 - SUS: Long texts are getting broken in PCO (POR)document
    Given notes are not exactly related to the problem. Let me know if notes could work for the current issue.
    Regards,

Maybe you are looking for