Vendors not getting published from Sourcing 7.0 to ECC

Dear Experts,
In our SAP Sourcing System version 7.0 we are not being able to publish suppliers from Souring to ECC but opposite is working fine i.e Vendors are coming from ECC to sourcing perfectly fine.
When ever we are creating a supplier in Sourcing and trying to publish it to ECC the status always remains as "Create Supplier : Waiting For Response" . Even iDocs are not getting created and also in PI we are not getting any data in the inbound area.
Any help will be appreciated.
Regards,
Rakesh Daiya

Hi Rakesh
Please check if the Interface and communication channel have been configured properly from PI side -
Communication Component (Sender): SAP Sourcing system
Interface : MI_OB_Supplier
Namespace :  http://sap.com/xi/Esourcing/SRMJS/OP
Communication Channel : CT_Generic_Receiving_IDOC_Channel_For_ERP_Inbound_IDOC
Thanks
Sudipta

Similar Messages

  • Baseline date not getting populated from SRM invoices posted to ECC 6.0

    Hi,
    We are currently in ECC 6.0. The SRM system is in 4.0. We have this particular problem that the baseline date is not getting populated from the Invoices posted from the SRM. The baseline date is blank and the document is saved.
    Did anyone face the same problem??? Can you please refer SAP note 541934 and expand........
    Thanks
    Aravind
    Edited by: Aitipamula Aravind on Aug 10, 2009 5:13 AM

    Hello,
    Yes, you could check the attached note 541934 and regard the implementation of the field ZFBDT in the invoicing document.
    Note 541934 provides a solution how to achieve the MM-customizing for payment baseline dates getting effective for invoices with SRM-origin. This note needs to be applied at your ERP-MM-side in the former plug-in-layer. As described in the note, this is a modification. It's recommended to apply in non-productive system first.
    Hope the above infor.are helps for you!
    Best Regards,
    Gladys xing

  • Shopping cart not getting released from sourcing cockpit

    Hi,
      Am trying to release a shopping cart  from sourcing, but it's not getting released. Mentioned below are the methods I've tried and area'a which I verified for possible error. The major challenge is it's not throwing any error message. Your inputs & guidance are really helpful & appreciated.
    - Moved the SC to workarea in sourcing cockpit and tried creating PO - Failed w/o any error.
    - Verified in backend BBP_PD - No error message
    - verified in rz20 - No error message.
    - Attributes used in SC - Verfied all the major values such as Vendor, account assignment, basic data etc - No issues.
    - Tried creating PO creation in backend w/o posting it - able to create PO with same data.
    Thanks & Regards
    Aswini

    Hi
    Check it up any errors in the web application  monitor. you must get some error message..
    update us what was the error message. did you assign the vendor before you create a vendor in the sourcing cockpit?
    are sc again goes back to worklist?
    regards
    Muthu

  • Vendor list - not get transaction from last three years

    Dear Sir,
    Can we have a list of vendor which are not get transaction from last three years ?
    Vijay Vadgaonkar
    SAP MM

    either you write a z-report
    or you download all vendor numbers from LFA1 table
    then run MC$4  transaction for analyzing period of last 3 year.
    download the vendor numbers from this report as well.
    Finally compare the both download (easiest with VLOOKUP formula) to find the delta, which are the inactive vendors.
    However, these are the inactive vendors from purchasing point of view only.
    vendors like restaurants and customs and tax authorities may only have financial postings and never purchasing activities.

  • Excise rate and value is not getting defaulted from the purchase order

    Hi all,
    While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
    Regards
    Vishal

    Hi,
    Follow STO Process for this;
    1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
    2. Assign this vendor to Delivering plant
    Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
    3. Create internal customer with the sales area of the vendor. Go To XD01
    4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
    5. Maintain condition records for the relevant pricing condition.
    6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
    7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
    8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
    Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
    9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
    Assign the document type NB to supplying plant and receiving plant
    10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
    11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
    10. Create Delivery: VL10G
    12. Picking, PGI: VL02N
    13. Billing: VF01
    Save the document and its done
    14. J1IIN - Outgoing Excise Invoice
    15. MIGO - Goods Receipt against outbound Delivery
    16. J1IEX - Capture & Post Excise Invoice
    Rgs

  • Could not get IOR from Domino Server while provisioning Lotus Notes

    Hi all,
    There are two servers that have OIM installed, development server and test server. From development server, we can
    provision to Lotus Notes just fine. But for test server everytime when
    provision to Lotus Notes. There will be an exception
    NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
    From test server
    I can access the URL http://10.3.100.61:63148/diiop_ior.txt using Internet Explorer
    I can telnet to 10.3.100.61 63148
    I can use connector testing program and it work fine
    All configuration and jar files are the same as development server
    There is no firewall or antivirus running in both systems.
    Both server is virtual server using VMWare.
    OS: Windows2003R2 Enterprise
    DB: Oracle 10gR2 10.2.0.2
    AS: Oracle AS 10g 10.1.3.3.0
    OIM 9.1.0
    Lotus Notes Connector 9.0.4.2
    Thank you.
    Satit
    The error is as below
    =================================================
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Host 10.3.100.61
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Port 63148
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Admin Pongtape Ungkawanish/Telecom./Central Support/Fin./KK_Bangkok/TH
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Certifier OU
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Before session
    08/11/11 11:24:26 Running setTimeoutParameters
    08/11/11 11:24:26 Running Connect
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Non-Secure Mode
    ERROR,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Connection refused to Lotus Notes......
    NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
         at lotus.domino.NotesFactory.requestIORPlain(Unknown Source)
         at lotus.domino.NotesFactory.requestIORUsingArgs(Unknown Source)
         at lotus.domino.NotesFactory.getIOR(Unknown Source)
         at lotus.domino.NotesFactory.createSessionUP(Unknown Source)
         at lotus.domino.NotesFactory.createSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LotusNotesProvision.connect(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.CONNECT(adpLNCREATEUSER.java:449)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.implementation(adpLNCREATEUSER.java:160)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.retryTasks(Unknown Source)
         at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.retryTasks(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.SecurityRoleInterceptor.invoke(SecurityRoleInterceptor.java:47)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
         at tcProvisioningOperations_RemoteProxy_6ocop18.retryTasks(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.NullPointerException
         at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:781)
         at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:913)
         ... 45 more
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],Unable to connect to the target. Attempting to reconnect after delay of 2000ms.......
    INFO,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession
    INFO,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Non-Secure Mode
    ERROR,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Connection refused to Lotus Notes......
    NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
         at lotus.domino.NotesFactory.requestIORPlain(Unknown Source)
         at lotus.domino.NotesFactory.requestIORUsingArgs(Unknown Source)
         at lotus.domino.NotesFactory.getIOR(Unknown Source)
         at lotus.domino.NotesFactory.createSessionUP(Unknown Source)
         at lotus.domino.NotesFactory.createSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LotusNotesProvision.connect(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.CONNECT(adpLNCREATEUSER.java:449)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.implementation(adpLNCREATEUSER.java:160)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.retryTasks(Unknown Source)
         at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.retryTasks(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.SecurityRoleInterceptor.invoke(SecurityRoleInterceptor.java:47)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
         at tcProvisioningOperations_RemoteProxy_6ocop18.retryTasks(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.NullPointerException
         at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:781)
         at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:913)
         ... 46 more

    check if DIIOP service is turned on at the Lotus Domino side...
    Oleg.

  • Purchase Req & Standard PO - Price is not getting Defaulted from Price List

    Dear All,
    Hope you are doing good!!!
    We are implementing R12.1 for one of our client. This query is pertaining to the Advance Pricing with Purchasing. Infact client wants to default the Purchase Requisition and Standard Purchase Order Price from Price List.
    I have done entire setup and defined ASL for this reason. But still price is not getting defulted from Contract Purchase Ageerement.
    What could be the reason. Its an standard fucntionality but still its not picking up.
    I would really appreciate if someone could help me on this. Its URGENT.
    Thanks in Advance.
    Thanks & Regards,
    Aditya

    Let us go through the steps involved in integrating Advanced Pricing with Purchasing so that we know if we have missed anything.
    1. Create Price Lists in Advanced Pricing.
    2. Setup Profile Options in System Administrator responsibility:
    QP: Licensed for Product - at Application: Purchasing level = Purchasing.
    QP: Pricing Transaction Entity - at Application: Purchasing level = Procurement
    ( Site level - ‘Order Fulfillment’ )
    Profile option can be set at site, application, and user levels.
    QP: Source System Code – at Application: Purchasing level = Oracle Purchasing
    ( Site level -- ‘Oracle Pricing’ )
    Profile can be set at site and responsibility levels.
    QP: Item Validation Organization - at Application: Purchasing level = null
    ( Site level -- specified in Financial Options )
    Profile option can be set at site and responsibility levels.
    3. Add item to the Price list Advanced Pricing ->Price Lists -> Price List Setup.
    Enter the item/price/dates etc.
    4. Create Contract Purchase Agreement.
    5. Create Approved Suppliers List. In the Source Documents, select the Type as Contract and reference the Contract Agreement Number.
    Create the Sourcing Rule and add the Rule to the Assignment Set.
    6. Create the Standard Purchase Order referencing the Contract Purchase Agreement in the Reference Documents.
    The Price listed should be defaulted from the Price Lists.
    Cross-Check the following steps and let me know if it still fails and we can try to resolve from then on :)

  • PO is not getting released from SRM

    Dear Experts,
    I am configuring SRM-SUS Scenario on SRM 7.0. I have set up all SRM, XI and SUS cofiguration.
    (SRM - SHDCLNT901, XI - XHDCLNT500, SUS- SHDCLNT951)
    Shopping Cart and PO is creating fine but PO is not tranferring from SRM to SUS.
    when i checked SXMB_MONI in SRM, there is no messeges showing there. It means PO is not getting released from SRM.
    Kindly let me know is there any t-code for enable communication between SRM and SUS?
    I have correctly configured XI and also transferred vendors from SRM to SUS through SupplierPortalTradingPartner_CreateOrChange_Out messege type  but
    PurchaseOrderRequest_Out  for PO transfer is not  getting triggered in sxmb_moni in SRM.
    Thanks in advance.
    Regards,
    Pawan Keshwani

    Hi,
    Thanks for your reply.
    I have configured  Application Control Workflow correctly ( I am using Workflow without approvals for PO (BUS2201))
    And in Rz20, I am getting below messege ("SHD : MTE class BBP_PO , Client 901 : No MTEs currently available*) for PO in Rz20 given below path
    (CCMS  monitor sets -> SAP (CEN) EnterpriseBuyer Monitors -> Purchase Order)
    I am configured ESOA Architecture in XI  for SRM-SUS , and my root issue is " I am not able to generate XML messeges in SRM".
    Not getting any messege in SXMB_MONI in SRM.
    Regards,
    Pawan Keshwani

  • VLD-2771: System privileges may not allow extraction from source T.

    How to solve this problem.
    while deploying I am getting this message,besides where in oracle site I can find documentation for the errors in warehouse builder.
    VLD-2771: System privileges may not allow extraction from source T.
    I had given dba privileges to both source and target schemas, but still getting the error.
    Regards,
    Prabhathg

    When I tried to deploy my mapping, I am getting warning message <<VLD-2771: System privileges may not allow extraction from source D_UII_MV_NCA_INFRACONN.>>. As solution written in "http://forums.oracle.com/forums/thread.jsp?forum=57&thread=252565&message=742299", I gave SELECT privilege on the source table to the target user. But still, I am getting this error message.
    Can you please guide me in right direction?

  • VLD-2771 System privileges may not allow extraction from source ....??

    When I try to deploy the mappings in OWB Deployment Manager, I got a Warning "VLD-2771 System privileges may not allow extraction from source ORDER_ITEMS". WHY? ^^""
    ========================================
    I define a Runtime Repository Connections "ORACLE_HW_RUNTIME"
    Host Name: localhost
    Port Number: 1521
    Service Name: GBGLM
    Connect As User: owb904rr
    Runtime Repository Owner: owb904rr
    and the "ORACLE_HW_RUNTIME" is in "ORACLE_WAREHOUSE" module, the "ORACLE_WAREHOUSE" use the link "OE" and the owner is "OWBUSER"
    p.s. the table "ORDER_ITEMS" is in "OE" schema. I had grant DBA to "owb904rr" and "OWBUSER".
    then use "ORACLE_HW_RUNTIME" to deploy the Mappings "WH_ORDERS_MAP". What I need to do for deploy?
    ^_^||

    Anyone with similar experience using SQL Server as the source?
    First I get: VLD-2771: System privileges may not allow extraction from source Product.
    Then if i ignore the warning and deploy, i get
    ORA-06550: line 15, column 18:
    PL/SQL: ORA-00942: table or view does not exist
    I have a public database link to the sql server database.
    When I create the mapping, I am able to see the tables and create the map. So why this problem when deploying. Which user is to be granted access to the source tables. I belive we cannot grant access to remote database tables using a database link. So what is the work around?
    Any help is highly appreciated.
    Please email me at [email protected]

  • Data not getting transffered from SRM system to BW

    Hi All,
    We have an issue where in the data is not getting transferred from SRM to BW. If i see in RSA 3 of SRM system, the datasource is pulling around 3000 records and in WE02, the idoc is generated and passed without any errors.
    Whereas in BW the idoc is coming with code 8 and no data is getting transferred to BW.
    What can be the probable reasons for this mismatch ??
    Thanks
    Abhi

    Hi Abhi,
    After an upgrade, i would go for following checks
    1. Check the Data Source on CRM side and check if it is Active.
    2. With Upgrade, usually DataSources become inactive and also, pls check if any required fields are hidden in the data source before you activate.
    3. After unhiding required fields, i would activate the Data Source and Replicate the Data Source on BI Side.
    4. Now I would delete the failed request by forcing its status to RED in RSMO and then go for the load.
    Let me know if it worked.

  • Dispatcher yellow,J2EE status info unavailable,Could not get file from DB

    Hello Experts,
    I have successfully installed a ECC 6.0 server-ABAP +JAVA  system (DB2 v9.5 FP4 windows server 2008-x64 bit).
    Kernel: 700 , Patch: 185 ; SP level : rel 700 , level 17
    I upgraded JSPM sucessfully from 14 to 17.Then i was trying to apply JAVA sp's one by one using single sp option JSPM tool.
    I DEPLOYED the first sp component sucesfully but after that the next component gave warning in JSPM check that SDM is not started.
    I checked MMC.Dispatcher was YELLOW and J2EE status info unavailable. Cannot use JCMON to start SDM..option 20 gives error--cannot access shared memory
    I already tried Notes   784568 and 997510
    Relevant logs:-
    jvm_bootstrap.out
    =================================================================================================
    Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
    com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
    Attempt to fully materialize lob data that is too large for the JVM.
    Disable data source property "fullyMaterializeLobData" for locator-based lob implementation. ERRORCODE=-4499, SQLSTATE=null ERRORCODE=-4499, SQLSTATE=null
    Exception occurred:
    com.sap.engine.bootstrap.SynchronizationException: Unable to synchronize native files for instance [ID140026]!
    ==============================================================================================
    dev_jcontrol
    =============================================================================================
    Thr 4360] *** ERROR => JsfOpenShm: FtInit(SESSION, 2, 176) failed (got (rc = 0 operation successful), expected (rc = 8 already initialized)) [jsfxxshm.c   913]
    [Thr 4360] *** ERROR => Can't create shared memory segment 69 (rc = 1) [jcntrxx.c    1749]
    [Thr 4360] *** ERROR => Can't initialize JControl Administration [jcntrxx.c    273]
    [Thr 4360] JControlCloseProgram: started (exitcode = -1)
    [Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c   1243]
    [Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c   1250]
    [Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c   1257]
    =================================================================================================
    log_bootstrap_ID0140026.0
    ==========================================================================================
    Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
    com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
    ============================================================================================
    Eagerly looking forward to a solution from you experts..
    Thanks,
    Rakesh

    Hi,
    I am facing the same related problem with ECC 6.0.
    My dispatcher started it is showing yellow-  dialog queue standstill, J2EE status info unavailable
    after some time dispatcher has stopped.
    Please check my below trace file for dispatcher:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      03
    sid        DEV
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    114
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        13108
    Fri Nov 27 02:31:55 2009
    kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (03 13108) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 114 successfully loaded
         shared lib "dw_xtc.dll" version 114 successfully loaded
         shared lib "dw_stl.dll" version 114 successfully loaded
         shared lib "dw_gui.dll" version 114 successfully loaded
         shared lib "dw_mdm.dll" version 114 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3903
    Fri Nov 27 02:31:59 2009
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5361]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >sapdev_DEV_03                           <
    DpShMCreate: sizeof(wp_adm)          15800     (1436)
    DpShMCreate: sizeof(tm_adm)          4232256     (21056)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    DpShMCreate: sizeof(comm_adm)          528064     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1536)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 08290040, size: 4889440)
    DpShMCreate: allocated sys_adm at 08290040
    DpShMCreate: allocated wp_adm at 08292090
    DpShMCreate: allocated tm_adm_list at 08295E48
    DpShMCreate: allocated tm_adm at 08295E78
    DpShMCreate: allocated wp_ca_adm at 0869F2B8
    DpShMCreate: allocated appc_ca_adm at 086A5078
    DpShMCreate: allocated comm_adm at 086A6FB8
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 08727E78
    DpShMCreate: allocated gw_adm at 08727EB8
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 08727EE8
    DpShMCreate: allocated wall_adm at 08727EF0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    Fri Nov 27 02:32:00 2009
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 1023 blocks reserved for free list.
    ES initialized.
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 13356
      argv[0] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
      argv[1] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
      argv[2] = pf=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=2919
      argv[5] = -DSAPSYSTEM=03
      argv[6] = -DSAPSYSTEMNAME=DEV
      argv[7] = -DSAPMYNAME=sapdev_DEV_03
      argv[8] = -DSAPPROFILE=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
    ***LOG Q0K=> DpMsAttach, mscon ( sapdev.visu.com) [dpxxdisp.c   11753]
    DpStartStopMsg: send start message (myname is >sapdev_DEV_03                           <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Fri Nov 27 02:32:01 2009
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpJ2eeLogin: j2ee state = CONNECTED
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 114
    Release check o.K.
    Fri Nov 27 02:32:05 2009
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1468
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2927) [nixxi.cpp    4248]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=13356)
    ERROR => DpProcKill: kill failed [dpntdisp.c   371]
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Fri Nov 27 02:32:40 2009
    ERROR => W0 (pid 13364) died [dpxxdisp.c   14441]
    ERROR => W1 (pid 13372) died [dpxxdisp.c   14441]
    ERROR => W2 (pid 13380) died [dpxxdisp.c   14441]
    ERROR => W3 (pid 13388) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W4 (pid 13396) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W5 (pid 13404) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W6 (pid 13412) died [dpxxdisp.c   14441]
    ERROR => W7 (pid 13420) died [dpxxdisp.c   14441]
    ERROR => W8 (pid 13428) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W9 (pid 13436) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W10 (pid 13444) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:50 2009
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Thu Nov 26 21:02:50 2009
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA    13364 Ended         no      1   0        0                                                                         
    1 DIA    13372 Ended         no      1   0        0                                                                         
    2 DIA    13380 Ended         no      1   0        0                                                                         
    3 DIA    13388 Ended         no      1   0        0                                                                         
    4 UPD    13396 Ended         no      1   0        0                                                                         
    5 ENQ    13404 Ended         no      1   0        0                                                                         
    6 BTC    13412 Ended         no      1   0        0                                                                         
    7 BTC    13420 Ended         no      1   0        0                                                                         
    8 BTC    13428 Ended         no      1   0        0                                                                         
    9 SPO    13436 Ended         no      1   0        0                                                                         
    10 UP2    13444 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Thu Nov 26 21:02:50 2009
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    6
    6
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    since last update     total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    Dump of tm_adm structure:               Thu Nov 26 21:02:50 2009
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Thu Nov 26 21:02:50 2009
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:55 2009
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >sapdev_DEV_03                           < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (13340) (SOFT_KILL)
    Stop icman
    killing process (13348) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:13340  HANDLE:1564)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:56 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:13340  HANDLE:1564)
    wait for end of icman
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:57 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:58 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:59 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Please help me to start my SAP MMC.
    Thanks

  • Weights are not getting copied from quote to order

    Hi All,
    While creating sales order items with reference to a Quote the weights are not getting copied (zero shown in weights) even though the material in  quote has weight.
    Why are the weights not getting properly from quote to order .

    hi
    goto VTAA and select the target document
    click on Magnifying glass symbol
    here check whether you have selected complete Reference or not
    But if you select this then the system copies the source document completely.
    Procedure
    If you mark the field, the system copies the source document into the target document completely. The system also copies the complete reference indicator. You cannot change the indicator in the target document.
    Regards

  • L2L issue, the tunnel does not getting up from one direction

    Hello,
    We have configure a L2L vpn between Asa and 1841 router. We are facing this issue.
    The tunnel is not getting up from the 1841 site never. When we are trying to generate traffic from the ASA site the tunnel is up and we can see decryps and encryps packets.
    Router 1841 Config:
    crypto isakmp policy 100
    encr 3des
    hash md5
    authentication pre-share
    group 2
    crypto isakmp key * address 213.249.XX.XX
    crypto ipsec transform-set XXXXX esp-3des esp-md5-hmac
    crypto map EKO_BG 100 ipsec-isakmp
    set peer 213.249.x.x
    set security-association lifetime seconds 28800
    set transform-set XXXXX
    set pfs group2
    match address 111
    interface FastEthernet0/0.2
    encapsulation dot1Q 3338
    ip address 212.200.30.130 255.255.255.252
    ip nat outside
    ip virtual-reassembly
    crypto map XXXXX
    ip nat pool nat_pool 93.87.XX.XX 93.87.XX.XX prefix-length 29
    ip nat inside source list 101 pool nat_pool overload
    ip nat inside source static 10.70.2.10 93.87.18.161
    ip nat inside source static 10.70.25.10 93.87.18.162
    ip nat inside source static 10.70.36.5 93.87.18.163
    ip nat inside source static 10.70.39.10 93.87.18.164
    ip nat inside source static 10.70.5.10 93.87.18.165
    access-list 101 deny   ip 10.70.200.0 0.0.0.255 any
    access-list 101 permit ip 10.70.0.0 0.0.255.255 any
    access-list 111 permit ip 10.70.200.0 0.0.0.255 172.40.10.100 0.0.0.3
    Asa Config:
    access-list inside_nat0_outbound extended permit ip 172.40.10.100 255.255.255.252 10.70.200.0 255.255.255.0
    access-list outside_cryptomap_320 remark xxxxxxx
    access-list outside_cryptomap_320 extended permit ip 172.40.10.100 255.255.255.252 10.70.200.0 255.255.255.0
    access-list inside_pnat_outbound_V5 extended permit ip host 10.8.x.x 10.70.200.0 255.255.255.0
    pager lines 24
    nat (inside) 9 access-list inside_pnat_outbound_V5
    crypto ipsec transform-set xxxxx esp-3des esp-md5-hmac
    crypto map mymap 150 match address
    crypto map mymap 150 set pfs
    crypto map mymap 150 set peer XXXXXX
    crypto map mymap 150 set transform-set XXX
    crypto map mymap 150 set security-association lifetime seconds 28800
    crypto map mymap 150 set security-association lifetime kilobytes 10000
    crypto map mymap 320 match address outside_cryptomap_320
    crypto map mymap 320 set pfs
    crypto map mymap 320 set peer XXXXX
    crypto map mymap 320 set transform-set XXXXX
    crypto map mymap 320 set security-association lifetime seconds 28800
    crypto map mymap 320 set security-association lifetime kilobytes 4608000
    crypto map mymap 65535 ipsec-isakmp dynamic outside_dyn_map
    crypto map mymap interface outside
    isakmp policy 150 authentication pre-share
    isakmp policy 150 encryption 3des
    isakmp policy 150 hash md5
    isakmp policy 150 group 2
    tunnel-group 212.200.x.x type ipsec-l2l
    tunnel-group 212.200.x.x ipsec-attributes
    pre-shared-key *
    Please advise.
    Thank you.

    hello Ashley,
    thank you for this info. Now from the router site the tunneling is getting up and I can see packets but althought the tunnel is up it can not make telnet to our server (172.40.10.100) on a specific port.
    We from ASA site can ping router Site and make telnet.
    Any ideas???
    Thank you all from your answers!

  • Why does my content not get published on my website?

    I published a website with Webmatrix to Azure using the "Download publish profile".  Everything went well and I didn't encounter any errors.  When I went to the azure URL that I created or click on that link, the URL displays the following message:
    This web site has been successfully created
    There's nothing here yet, but Windows Azure makes it simple to publish content with GIT, TFS, FTP or your favorite development tool such as Visual Studio or Webmatrix
    When I click on the Azure Dashboard I notice that under "usage overview" it states under the "File system storage" that I'm using 18.09 MB of the 1024MB limit.  This to me is an indication that the files/content were successfully transferred from Webmatrix
    to Azure, but it did not get published to the URL.
    When I click on the little "?" on Azure, it mentions something about uploading the content with "web deploy", yet there is no icon anywhere on Azure that I can find to upload anything.
    Is there anything that I must do to get my content to show up at the URL or did something went wrong when I downloaded or installed Azure?  Thanks
    PS:  I'm just using the 90 day trail period and have Vista

    Hi Thanks for the reply
    When I go to the link that you supplied, I get the exact same message: Website has been created but there is nothing here.  I have now uploaded 10 sites from Webmatrix to Azure.  All 10 websites uploaded fine and I received a message that it was
    successfully published.  In Azure the status of all the websites are "running", but if you click on the URL, it shows the message above. 
    Also, when I click on the FTP Hostname link for any particular site, it takes me to a login screen.  After logging in I get an Alert "530 user cannot log in"
    Also, is there a way to access the Wordpress root files such as wp-content from anywhere?  Thanks

Maybe you are looking for

  • NI5112 PFI Reference Clock Input Problem

    I'm writing C code to use an NI5112 O-Scope card as a digitizer and I would like to synchronize it with an HP 8648C signal generator (which has the high-stability timebase option) through PFI1. I want to use the signal generator for the reference clo

  • Monitoring 10G Database from EM

    Hi All I am having Oracle 10G Release 2 installed on one of the server. where two databases are running. First database, DB01 was created through Enterprise manager and second database, DB02 was created through the script. I am able to see the databa

  • ACPI Table not in Reclaim memory error, HELP!!!! please

    Totally new to this, only used Solaris on a Sparc. The CDROM is in the drive, it boots up at startup and says "SunOS Secondary Boot Version 3.00 Warning: ACPI Tables not in Reclaim memory prom_panic: kmem_free block already free entering boot debugge

  • CS3 - CS4: JPG resolution

    Hi, I'm a developer using Apache FOP to create PDFs. We are using JPGs (CMYK) with a resolution of 300dpi (had some problems with tiff, so we're on jpg). Here's the problem I'm in now: Creating the JPG files with PS CS3 works fine. Now we changed to

  • Fatal error at printing report

    When i add a table with records more than 500 rows to the report and print it to pdf with FreePdfXP, an Error-Dialog shew up with the note " Error: -2147352567 occurred at failed to open printer". After clicking on the button "Stop" an other dialog s