Vendot not getting block in SPL in GTS
Hi GTS Gurus,
I am trying to create a PO in Ccode US and dest country is also US. The Vendor is not getting blcok though we have made the necessary config. Can anybodyy suggest any other areas we need to check.
Correct solutions would be rewarded with points.
rgds..Ameet
Hello Ameet,
in case you are sure the partner is within denied list
check you customizing for SPL screening.
SAP Global Trade Services --> SAP Compliance Management --> "Sanctioned Party List Screening" Service -> Activate Legal Regulations -->
"SPLUS" on country level US
4 Check: Receipt/Import (including domestic)
Best regards,
Gabriel.
Similar Messages
-
Sales orders from CRM are not getting blocked with credit check
Hi All
I have configured ECC in such a way that , if cutomer does not have enough creditlimt, then those sales order will get blocked. Our orders will come from CRM, and some times some orders are not getting blocked with credit check even though the customer does not have credit limit. And at the same time some orders are blocked with credit check...what are all the things that should be checked to diagnose the problem.
Thanks in advance for looking into thisPlease check if you have any custom code/user exit in ECC which uses transaction code (VA01 , VA02 or VA05 etc) prior to invoking credit checks.
Orders created via CRM will not have transaction code set (SY-TCODE). -
Two Users on a Mac in Mavericks...how do you use 2 apple ID's and not get blocked?
After upgrading to Mavericks, we started getting a message "This computer is already associated with an Apple ID. If you download past purchases with your apple ID, you cannot auto-download or download past purchases with a different Apple ID for 90 days" message.
My husband and I have separate iPhones and iPads. We share an iMac, but we have separate logins. After this upgrade, one of us is always locked out of downloading purchases we made on our devices to the shared iMac.
If this creates a problem for us, surely it creates a problem for bigger families sharing one computer too? Anybody have an idea on a work-around?
We never had any problem with using 2 accounts on this machine for the past 2 years until Mavericks.hmm, that's a trick one! what I would do is go to Messages>preferences>accounts and then select imessages and then select account details and then sign out. Then your wife will need to sign in with her apple id.
hope this helps!!
let me know if that works because I've never actually tried it.
simply adding both of your accounts to be reached at will prove to be faulty because when you reply you can only reply with the one email address. And even if you switch caller id's it probably still won't work. So I think my method would be the easiest way to do that at this time. -
Hi - Even though block popup windows is unchecked in content tab of options, I am still not getting any popups. Please suggest how to over come this problem.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Did you make sure that your security software isn't blocking the pop-ups?
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/ -
Output fax not getting triggered when sales order credit block is released
Hi Experts,
I am working on an issue.
I have one sales Order which has credit block.
when we release the credit block via vkm3, then the output fax gets triggered.
I have another sales order which has credit block,
when we release the credit blcok via vkm3 , the output fax is NOT getting triggered.
If any of you has worked on this setting, request your input on where to find the settings/coding for the same.
Any advice on this please.
Regs,
SuryaD.
Edited by: SuryaD on Oct 21, 2010 9:34 PMHi Brad,
Thanks for your response.
Order 1: Issues output fax(ZFAX) correctly when block is released.(i see output zfax in te output screen)
Order 2: Fails to issue output fax(ZFAX) even when the block is released.( i dont see any output in the output screen)
I went to Go to -Determine analysis for both orders 1 and order 2.
in both the analysis i am able to see the output ZFAX.
*Analysis Output*
*Order 1 Order 2*
1. ZFAX 1. ZFAX
10(Z010) 10(Z010)
0000122426 0000122427
2. ZFAX 2. ZFAX
When i click, D.Click on the output type ZFAX on both the order Analysis output screen, i see similarities.
There in just 2 differences as below.
In the above screen,
1.Order 1 ==> has some value 0000122426
2.For Order 1==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
Diagnosis
Output ZFAX has already been issued. Multiple issue for this output type is forbidden in Customizing.
In the above screen
1.Order 2 ==> has some value 0000122427
2.For Order 2==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
No more information is available.
Please guide as to how to initiate the debug for output processing ?
Which screen where to switch on debugger.
where to look further?
Regards,
SuryaD.
Edited by: SuryaD on Oct 22, 2010 11:41 AM -
ALV Block list. Field name at user command not getting populated
Hi All,
I'm trying to use ALN block list. Field catalog is built using the REUSEALVMERGE FM.
I've put hot spot on some fields. When I'm trying to capture the data when user clicks on the hotspot field the structure that comes in the user_command subroutine is not getting populated with the fieldname. But it is getting populated with the tabname and value is also coming properly.
FORM user_command
USING
ucomm TYPE sy-ucomm
selfield TYPE kkblo_selfield.
What could be the possible reason?
I appreciate your inputs.Hi Surya,
Did you find the solution for this?
Best Regards. -
How can I get itunes to download on my PC. I just got an ipod classic for Christmas and can not get Itunes to download. Website goes to downloaded page but i never get a downloading popup. I even turned off my popup blocker.
Make an appointment at the genius bar.
If you went without an appointment, then it would make sense that you could be turned away. -
Blocking Indicator not getting removed on milestone confirmation in PS
Dear Experts,
I have a issue in my project.
We have a scenario where Preq and PO getting created from PS activity.
We are using Invoice plan in this scenario. created in the Activity.
When we create Milestone and Invoice plan it will go for release process to get Preq released. after this PO will be created and GR will be done.
Problem: When PS confirms the Activity the blocking sign in PO invoicing plan is not getting removed.
Please explain me:
What configuration settings required to remove the blocking sign indicator in PO automatically.
Tell me Process steps if any.
Appreciate early response.
BR,
ArunAwaiting kind replies.
-
Data not getting in table in master detail block form
Hi
I am using oracle forms 10g
I have three block namely control_block, Header_block and detail_block and three button in three block. Find button in control_block,Detail button in Header_block and save button in Detail_block.
Now i will enter PO_number in the Control block and enter find button and the po details is fetched and it will show the po details in the Header_block and in the header_block i have one field named as Expeditor and here the user will assing Expeditor to that po_number and Click the Save button in the Detail_Block.
this is my code
DECLARE
ln_count NUMBER;
CURSOR c_expeditor
IS
SELECT po_number
FROM xxogec_poexp_expeditor_stg
WHERE po_number = :header_block.po_number;
BEGIN
IF :DETAIL_BLOCK.po_number IS NULL
THEN
FOR c_exp_rec IN c_expeditor
LOOP
IF c_expeditor%NOTFOUND
THEN
INSERT INTO xxogec_poexp_expeditor_stg
(po_header_id,
po_number, creation_date,
po_expeditor_name
VALUES (:header_block.po_header_id,
:header_block.po_number, SYSDATE,
:header_block.expeditor
ELSE
UPDATE xxogec_poexp_expeditor_stg
SET po_expeditor_name = :header_block.expeditor
WHERE po_number = :header_block.po_number;
END IF;
END LOOP;
STANDARD.COMMIT;
End if;
End;
Now when i press save button the data is not getting inserted.
Can any please correct me where my code went wrong.
Thanks & regards
Srikkanth.MFOR c_exp_rec IN c_expeditor
LOOP
IF c_expeditor%NOTFOUND
THENYou'll never get to the IF statemement, because there is nothing to loop if there is nothing to be found. -
Inbound Delivery not getting transferred to GTS
Hi Experts,
We are presently implementing GTS 7.2 Customs Management in my company and we are experiencing this issue. Here are steps completed for the document transfer.
1. GTS plugis are activated for the Inbound Delvieries along with other documents.
2. All the basic configuration is also complete in the GTS system.
When we create a inbound delivery in ECC 6.0, it is not getting transferred to GTS. But when I go set the incomplete check buttoen either at header or line item level of the delivery, then it is immediately transferred to GTS.
I checked all the config related to incomplete procedure for SD/MM documents in ECC. I am able to see the green light automatically set (after the config VI29 and VI49) at the header/item level but still incomplete set is not automatically set. Can you please help to find are there any other config which needs to be done to make this inbound delivery automatic. I understand there is a user exit for this, but I would like to accomplish without userexit.
Thanks in advance.
Vijay.Hi Vijay,
Ok, that's a lot clearer - thanks.
I'm fairly sure that those "SET" buttons have no influence on the transfer of the Inbound Delivery to GTS. And, as far as I know, they have no internal functionality - the toggling buttons are provided just so that you can flag manually if required for some reason. My guess is that making ANY change to the Delivery would have the same result.
The other question I should have asked is; why are you trying to transfer the Inbound Delivery?
- compliance checks?
- transit declaration?
- customs declaration before GR?
That's to say; what gets created in GTS when the Delivery transfers?
Best regards,
Dave -
Dead line block is not getting executed
Hi,
I configured BPM scenario to collect messages from one interface and create IDOCs in ECC.i configured with following steps
Start
Block(start of Block)
Loop(While 1=1)
receive
container step(to create multiline container)
endloop
Exception branch
Deadline branch(time 1 minute with control step)
End block
Transformation
send.
But deadline branch is not getting executed.its going to endless loop.
anybody got idea about the problem?Make sure that:
1. your deadline branch has a control step raising the exception (and this exception branch could be empty, since it will only end the block; you can create another exception handler for specific application exceptions);
2. all the exception handlers are defined in Block step;
3. your correlation container is properly started and used by receive step (with the right fields being used for each correlation string).
And as best practices, make sure that:
1. your correlation is defined as local correlation in the Block step;
2. your loop step contains only the receive step (which starts process) and a container operation of type append, which appends the received message into a multiline container (do all mappings after the loop is complete).
Finally, save and activate your changes, go into SXI_CACHE transaction and check the returncode your BPM; it should be zero. Otherwise, there is something wrong with it.
Regards,
Henrique. -
Could not get VHB/MDB at block on USB Thumb drive
I'm trying to not have to shell out $100 for DiskWarrior and because im on a Macbook Air, with no media drive, so i think i'd have to shell for a usb optical drive too.... so if someone can help me with this stupid, stupid, occurance (which will teach me to NEVER use hfs+ again), I'd be really appreciative.
I have a PNY 64GB usb 2.0 thumbdrive and it pooped the bed on me....here is all the diagnostic information i can provide
from fsck_hfs -d:
Unable to open block device /dev/disk1: Resource busyjournal_replay(/dev/disk1) returned 16
** /dev/rdisk1 (NO WRITE)
Using cacheBlockSize=32K cacheTotalBlock=16384 cacheSize=524288K.
Executing fsck_hfs (version diskdev_cmds-540.1~44).
Block 2 is not an MDB or Volume Header
CheckForClean - could not get VHB/MDB at block 133512190
** Checking Journaled HFS Plus volume.
Invalid B-tree node size
(3, 0)
** The volume could not be verified completely.
volume check failed with error 7
volume type is pure HFS+
primary MDB is at block 0 0x00
alternate MDB is at block 0 0x00
primary VHB is at block 2 0x02
alternate VHB is at block 133512190 0x7f53bfe
sector size = 512 0x200
VolumeObject flags = 0x05
total sectors for volume = 133512192 0x7f53c00
total sectors for embedded volume = 0 0x00
from console logs:
6/29/12 9:30:42.000 AM kernel: hfs_swap_BTNode: invalid forward link (0x0a0d0321 >= 0x00001880)
6/29/12 9:30:42.000 AM kernel: hfs: node=5 fileID=4 volume=Windows7 device=/dev/disk1s1
6/29/12 9:30:42.000 AM kernel: hfs: Runtime corruption detected on Windows7, fsck will be forced on next mount.
all my files are flipping gone, but it sure kep the directories.....yay
Thanks in advance for any helpI'm trying to not have to shell out $100 for DiskWarrior and because im on a Macbook Air, with no media drive, so i think i'd have to shell for a usb optical drive too.... so if someone can help me with this stupid, stupid, occurance (which will teach me to NEVER use hfs+ again), I'd be really appreciative.
I have a PNY 64GB usb 2.0 thumbdrive and it pooped the bed on me....here is all the diagnostic information i can provide
from fsck_hfs -d:
Unable to open block device /dev/disk1: Resource busyjournal_replay(/dev/disk1) returned 16
** /dev/rdisk1 (NO WRITE)
Using cacheBlockSize=32K cacheTotalBlock=16384 cacheSize=524288K.
Executing fsck_hfs (version diskdev_cmds-540.1~44).
Block 2 is not an MDB or Volume Header
CheckForClean - could not get VHB/MDB at block 133512190
** Checking Journaled HFS Plus volume.
Invalid B-tree node size
(3, 0)
** The volume could not be verified completely.
volume check failed with error 7
volume type is pure HFS+
primary MDB is at block 0 0x00
alternate MDB is at block 0 0x00
primary VHB is at block 2 0x02
alternate VHB is at block 133512190 0x7f53bfe
sector size = 512 0x200
VolumeObject flags = 0x05
total sectors for volume = 133512192 0x7f53c00
total sectors for embedded volume = 0 0x00
from console logs:
6/29/12 9:30:42.000 AM kernel: hfs_swap_BTNode: invalid forward link (0x0a0d0321 >= 0x00001880)
6/29/12 9:30:42.000 AM kernel: hfs: node=5 fileID=4 volume=Windows7 device=/dev/disk1s1
6/29/12 9:30:42.000 AM kernel: hfs: Runtime corruption detected on Windows7, fsck will be forced on next mount.
all my files are flipping gone, but it sure kep the directories.....yay
Thanks in advance for any help -
Data in detailed block is not getting populated
I have created 3 blocks-: block1, block2 and block3
I have created two relations
1st - between block1 and block2 (block1 is master and block2 is detailed)
2nd - between block1 and block3 (block1 is master and block3 is detailed)
Now, on the canvas I place a text item block1.text_item1 (involved in relation) from block1,
and a text item block3.text_item3 from block3 (this too involved in relation) block3
when I execute the form and I query on master block that is on block1.text_item1, data in detail block that is in block3.text_item3 do not get populated.
Now I place a text item block2.text_item2(involved in the relation) from block2 on the same canvas
Now I again execute the form and query on the master block that is on block1.text_item1, this time data in all three blocks got populated.
I want to place items only from block1 and block3 at present. Could you please tell me how can I do this?
RegardsNo, I am not getting such error. Only data is not getting populated.
If I remove item from block3 and place item from block2, then also the data is getting populated.
Item from block1+ Item from block2 -> Data is getting populated
Item from block1+ Item from block3 -> Data is not getting populated
Item from block1+ Item from block2+Item from block3 -> Data is getting populated
Regards -
I have bought a new ipad mini and when i try to use app store asks me my email but it does not let me review, it get blocks and does not let me tap review
You have to provide email to access app store,dont expect walk in and walk out
-
OBUSOBJECT Blocked for conversion and not getting activated
I have changed the infoobject OBUSOBJECT attribute 0Mainusage fron <b>navigational to display</b> and then tried activating the OBUSOBJECT , , OBUSOBJECT If in the former active version this IO had 0MAINUSAGE as a nav attribute, now, in a revised version, this is just display attribute. surprise that the OBUSOBJECT couldnt be activated by installation.
Please tell me what are the steps now to resolve this. i want to actiovate the OBUSOBJECT in either old active version or activate with new revisions. i am just stuck since it is not getting activated.
please tell if i go to se16 and <b>sdokmia</b> table in first row i put BW* and then in
3 rd row i put what attribute since when i put 0Mainusage (/BI0/OIMAINUSAGE)
it does not show any record what should i put there?? and then what is the next step. if you can help me step by step.
please help me to resolve this
Regards
Soniya KapoorHi Soniya,
If i have understood you properly, you have one attribute of the infoobject navigations, which u changed to display and tried activating and its not getting activated. This particular attribute is used in some othe cube as navigational attribute as well. Without deleting those references, u want to change the infoobject.
If thats the case, you will not be able to activate ur infoobject. All the reference have to be revoved before activating the object. Sorry for that
Regards
Sriram
Maybe you are looking for
-
Hi Experts, I am facing an issue while accessing SharePoint 2013 news feed REST api URL <SiteCollectionURL>/_api/social.feed/my/news from browser giving error "The server encountered an error processing the request. See server logs for more details."
-
I recently bought a NOkia 5310 express music phone, and I'm trying to copy some songs onto it. Whenever I try to get it set up to copy the music it says that my phone is "in file transfer mode, and cannot be use with pc suite, quit file transfer mode
-
Source code jumps around when re-opening page?
Is the following a common problem with Dreamwver CS4 Source Code view? In an effort to make the code read nice and neat, like everyone else I try to indent and nest my code. For example: <div> <ul> <li>one</li>
-
Re. imovie 9.0.4 Viewing a timeline in event browser?
How can I pinpoint specific cues in my event? That is, my event browser contains a 2hr long movie from which I want to pull out excerpts. So for example, how can I find the scene that begins at precisely 24 minutes 18 seconds. I am able to see a time
-
What is R3 in SAP ? Give a detailed clear information about it Pls ..