VENTURE DETAILS NOT DERIVED FROM 0001
while posting through F-43 a vendor getting credited and a bank commission a/c (balance sheet a/c) getting debited where after simulating and posting the document at the time of saving it is showing ' VENTURE DETAILS NOT DERIVED FROM 0001'. Is it due to that G/L is not defined in Balance sheet adjustment A/c group. there is no WBS only a cost object is entered in line item of Vendor. Pls reply
Is it error?
When you have error, always post the message number
Similar Messages
-
TPID not Derive from Intracompany Asset Transfer
Hi,
I'm facing a problem with Intracompany asset transfer ~ Trading Partner is not auto derive from the asset transfer posting.
Currently I'm using a customize transfer variant (copy from transfer variant 4). The only difference is that the customize one do not copy the original master data details (cost ctr, plant, etc) to a new asset.
Is there any other way that I can use to make the TPID automatically derive from this transaction?
TQ.Hi,
check the transfer variant concerning the Transfer of Fields for new Assets in Target Company Codes. IMG Asset Accounting -> Transactions -> Intercompany Asset Transfers -> Automatic Intercompany Asset Transfers -> Define Transfer Variants. On the popup choose "Specify Transfer of Fields (for New Asset in Target CoCd)" ... here you can set up which fields are taken over, when you create new assets within the transfer posting.
Regards,
Markus -
Error while creating money market transaction - payment details not retrieving from BP master data.
Hello friends
I have error while creating financial transaction. Payment details are not retrieving from BP master data to creating financial transaction screen.
No payment details entered for transaction
Message no. FTR0030
Please advise to set off this.
Thanks & Regards
SwamiDear Swami,
Please select one payment details in Business partner and use assigned tab from top selection parameter from standing instruction to assigned bank details to product type.
It will open other window like above example for each product of treasury, then assign bank details to product. Once assigned and save.
System will pick payment details in deal automatically based on business partner.
Hope this solve your issue.
Regards,
Jain
Message was edited by: Jain Varghese -
Commitment item can not derived from main asset number
Dear all,
Our client have 1 G/L LVA and divided to many asset class LVA. Asset lva will post to general expense when run depreciation, and they want the acquisition/procurement of LVA should check the budget of the general expense.
It means the acquisition of LVA will check the budget of general expense, then no budget when run depreciation.
I already setting for no check budget for run depreciation. However, i found trouble when set the derivation from main asset number to commitment item. I want to set from main asset number because only 1 G/L LVA.
Derivation rule from main asset number not populated to commitment item which i'm expecting, example
FMDERIVE (1) CI from main asset number (for acquisition)
asset number CI
23000000000 7400000102
FMDERIVE (2) CI from g/l account
G/L acct. CI
2290000001 2290000001
Because asset number 23000000000 assign to g/l 2290000001, then the tracing always read the g/l account, then derive to commititem 2290000001 NOT to 7400000102.
I already give many condition however it can not work. Even i deactivate fmderive (2), asset number can not populate to relevant commitment item.
Please give me advice how derive the commitment item from main asset number or relevan things.
Regards,
DewiHi Dewi
Please have a look at these notes which I think are interesting:
[736914|https://service.sap.com/sap/support/notes/736914] Budget relevance of asset transactions
[1268001|https://service.sap.com/sap/support/notes/1268001] FI313 - No funds center entered/derived
So, if you need to derive the FMAA from the Asset master data, you could enable a derivation step calling function module FMDT_READ_MD_ASSET. Take care of following derivation steps which may be overwriting the derived values from FMDT_READ_MD_ASSET. See the trace log, according to note [666322|https://service.sap.com/sap/support/notes/666322]
Cheers
Mar -
Payment card details not replicated from CRM to ECC
Hello
We are creating BP in CRM which replicates into ECC. In BP, we are maintaining Payment cards. But, while replicating to ECC, this Payment card details are not replicating to ECC.
The data is present in the BDoc.
Please help!!
Regards,
DebolinaHi Debolina,
Can you please share the solution. I have the similar requirement.
Regards,
Vaibhav -
How to hightlight the text in a component which is not derived from JTextCo
I have a swing componet, but it is not JTextComponent. I need to highlight the text in that compont when it gets the focus. How do I do that? Thanks,
Methods inherited from class versata.vfc.VSChoiceBase ::
addChoiceListener, addMissingChar, displayText, focusGained, focusLost, getBackground, getCodeTable, getDataFieldName, getDataFieldNumber, getDataSource, getDataSourceName, getDisabledForeground, getDisplayedText, getForeground, getForm, getFormat, getFormatter, getHelpURL, getMetaColumn, getNextFocusableComponent, getStatusText, getTabOrder, getTabStop, getTag, getTextComponent, getToolTip, grabFocus, initializeControl, isAllowMultipleValue, isDataDirty, isEditable, isFocusTraversable, isManagingFocus, keyReleased, keyTyped, mouseClicked, mouseDragged, mouseEntered, mouseExited, mouseMoved, mousePressed, mouseReleased, paintComponent, postEvent, processEvent, removeChoiceListener, requestFocus, reshape, setAllowMultipleValue, setBackground, setCodeTable, setDataDirty, setDataFieldName, setDataFieldNumber, setDataSource, setDataSourceName, setDisabledForeground, setEditable, setEnabled, setFont, setForeground, setFormat, setFormatter, setHelpURL, setNextFocusableComponent, setStatusText, setTabOrder, setTabStop, setTag, setToolTip, setToolTipText
Methods in VSPickChoice
afterFormInitialize, afterPickFill, beforePickFill, CurrentComponentChanged, CurrentDataControlChanged, dataChanged, getDisplayMode, getPick, getPickName, getQueryText, getText, hasPick, hideChoiceWindow, keyPressed, queryModeChanged, setDisplayMode, setPick, setPick, setPickName, setText, updateNotify -
Print Button Derived From a Select List Is Not Working
Hello,
I followed the instructions "Creating a PDF Report from Derived Output Format" http://www.oracle.com/technology/obe/apex/apex31nf/apex31rpt.htm#t2
Steps
In order to derive the output format, you need to create an item that contains the list of formats to select from. Perform the following steps:
1. Under Items, click the Create icon.
2. Click Select List.
3. Make sure Select List is selected for Select List Control Type and click Next.
4. Change the Name to P<#>OUTPUTLIST and click Next.
5. You need to specify the list of output types for the report and the bottom of the page. Select the Create or edit static List of Values
6. Enter the following values and click Apply.
Display Value Return Value
PDF PDF
Word RTF
Excel XLS
HTML HTM
XML XML
7. Select No for Display Null Option and Click Next.
8. Change the Label to Output Format and click Next.
9. Enter PDF for the Default and click Create Item.
10. Now that the list of output formats is created, you need to change the Output Format when the Print link is selected. Under Regions, select the Print link.
11. Under Printing, select Derive from Item for Output Format and select the item you just created P<#>OUTPUTLIST for Item and click Apply Changes.
12. Click Run Page.
13. When the report is displayed, select Excel from the list of Output Formats. Note: In Oracle Application Express 3.1, the XML format was added
14. At the bottom of the report, select the Print link.
15. A window appears asking you which program you want to open the Excel file with. Click OK (or Open depending on what browser you have) . Excel is open and the report is displayed. Close the Excel window.
16. You can also create a button to produce the report based on the output format rather than clicking the Print link at the bottom of the report. Click Edit Page.
17. Under Buttons, click the Create icon.
18. Accept the default and click Next
19. Select Create a button displayed among this region's items and click Next
20. Enter P<#>_Print for the Button Name, enter Print for the Label and Request and select HTML Button for Button Style. Then click Create Button
21. The region printing link contains the id of the region. Since you want to invoke the print from a button instead of the link you need to create a branch and specify the FLOW_XMLP_OUTPUT_R### parameter in the Request field for the Action so the application knows what to do when the Print button is pressed. Under Regions, select the Print link.
22. Ctrl-C the FLOW_XMLP_OUTPUT_R### section of the Print URL field. Since you are going to invoke the print from the button, you can remove the Print in the Label Link field and click Apply Changes.
23. Under Branches, select the Create icon.
24. Accept the default and click Next
25. Enter the current page for the Page and paste the FLOW_XMLP_OUTPUT_R### parameter that you copied into the Request field and click Next.
26. Select P<#>_PRINT for When Button Pressed and click Create Branch
27. Click Run Page
28. Select XML for the Output Format and click Print.
If I use the link at the bottom of the report region when I set the print options on the print tab of a report, it will print out in both pdf and rtf formats. I get an error with the Excel format. The print button isn't even working. When I select the button, nothing happens.
Any help is appreciated.Hello Andy,
I ended up putting in a ticket with Metalink. It is a known bug it seems. This is what the rep said:
UPDATE
=======
These bugs are fixed in the next ApEx patch 3.1.2. Patch 3.1.2 is expected (tentatively) in 2 weeks at the
earliest.
The bug fixes for these bugs have been backported to 3.1.1 and the one-off patches (patch 7202883 & 7156139) can be downloaded from metalink. One-of
f patches do not undergo the normal full regression testing, as is done for the
full APEX 3.1.2 patch set.
Once 7202883 and 7156139 were applied, I was able to download in all formats.
Kelly -
Ship-to Party details- not from Customer master
Hi all,
I need to fetch ship to party details for SO and those details should not be from Customer master(order specific including name, location and region)
For that I am using following code.
SELECT vbeln
kunnr
adrnr
parvw
FROM vbpa
INTO TABLE it_vbpa
FOR ALL ENTRIES IN it_vbak
WHERE vbeln = it_vbak-vbeln
and posnr = '000000' "Header line partner details
AND parvw = 'WE'.
IF NOT it_vbpa[] IS INITIAL.
SELECT addrnumber
name1
location
region
FROM adrc
INTO TABLE it_adrc
FOR ALL ENTRIES IN it_vbpa
WHERE addrnumber = it_vbpa-adrnr.
ENDIF.
Am I doing it in correct way or am I missing something here?. Please suggest.
RegardsHi,
It seems you are retrieving partner detials at header level of a SO. Code seems to be OK.
Let us know if you have further issues. Thanks. -
hi friends,
i get an error "Venture details cannot be derived from line 00001 i have recently changed the tranasction type and tested by uploading the bank statement and the posting were not done coz of this problem.
can any one suggest me the solution.
thanks
cheers
charlieHi Eli,
Thank you for the update!
Do you have any example for this, i mean how to define rules for Joint venture details under WBS Element.
Thanks and Regards,
Ashok. -
Earmarked funds during goods receipt (GR) is not inherited from PO.
Hi, Everybody u2026
We are using Earmarked Funds relevant for FM updating, but, during goods receipt (GR) and invoice receipt (IR) it is not inherited from purchase order (PO).
In ME21N the account assignment is F and the system ask us to enter the GL Account, Order and additional the Earmarked Funds. The system is deriving correctly the fund, the funds center and the commitment item from those entered in the Earmarked Funds.
However, during goods receipt and invoice receipt, the Earmarked Funds is not inherited from purchase order (PO) besides the others account assignments (order, fund, funds center and commitment item ) in the coding block.
Best regards,
ThanksHello,
I will provide some hints:
- If it is a service PO, please check the Note 972276 (Service Purchase orders only).
- If the posting is related to Asset, please kindly check:
a. Note 684659
b. Check if you have a derivation rule in FMDERIVE with the function module FMDT_READ_MD_ASSET.
c. Check in your FI-AA customizing if you have activated the account
assignment element but you have not specified an account assignment type for
account assignment object for APC balance sheet postings (see note 684659 for
details).
I hope it helps
Best Regards,
Vanessa Barth. -
Entity Object (EO) issue using "Derived from SQL Expression" funtionality
I am using JDeveloper 11.1.1.6
In my use case I am trying to get my EO to return results from a query such as the following:
SELECT table1.my_id,table1.my_des,
count(table2.store_num) as storeCount
FROM table1
LEFT JOIN table2
ON table1.my_id = table2.my_id
group by table1.my_id,table1.my_des
I have chosen to follow the path described in the following URL:
http://www.exploreoracle.com/2010/09/07/using-transient-attribute-with-derived-from-sql-expression-in-jdeveloper-11g/
To begin with, I created my EO's and VO's by using the "Business Components from Tables" wizard. This created EO and VO's for my 2 tables based on the DB schema.
I added the VO's to an app module and tested both VO's. I was able to navigate both VO's.
I then crreated a new attribute for the table1 EO. Please note that table1 does include 7 fields prior to this field therefore this becomes the 8th field. That is important once you get to the exception being thrown. The XML is as follows
<Attribute
Name="StoreCount"
IsUpdateable="false"
IsQueriable="false"
IsPersistent="false"
Precision="5"
Scale="0"
ColumnName="STORECOUNT"
SQLType="NUMERIC"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
Expression="(select coalesce(count(*),0) as StoreCount from table2 where my_id = table1.my_id)">
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="STORE_COUNT"/>
</SchemaBasedProperties>
</Properties>
</Attribute>
I then tested the VO's again in the app module and everything continues to work fine.
I then added the new attribute to the VO by doing "Add Attribute from Entity".
I then tested the VO for Table1 and now get the following error. Could you please advise me as to what I might be doing wrong.
[132] oracle.jbo.AttributeLoadException: JBO-27021: Failed to load custom data type value at index 8 with java object of type oracle.jbo.domain.Number due to java.sql.SQLException.
at oracle.jbo.server.OracleSQLBuilderImpl.doLoadFromResultSet(OracleSQLBuilderImpl.java:1375)
at oracle.jbo.server.AttributeDefImpl.loadFromResultSet(AttributeDefImpl.java:2536)
at oracle.jbo.server.ViewRowImpl.populate(ViewRowImpl.java:3885)
at oracle.jbo.server.ViewDefImpl.createInstanceFromResultSet(ViewDefImpl.java:2555)
at oracle.jbo.server.ViewObjectImpl.createRowFromResultSet(ViewObjectImpl.java:6044)
at oracle.jbo.server.ViewObjectImpl.createInstanceFromResultSet(ViewObjectImpl.java:5822)
at oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:3693)
at oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:3548)
at oracle.jbo.server.QueryCollection.get(QueryCollection.java:2261)
at oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:5111)
at oracle.jbo.server.ViewRowSetIteratorImpl.doFetch(ViewRowSetIteratorImpl.java:2971)
at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2827)
at oracle.jbo.server.ViewRowSetIteratorImpl.refresh(ViewRowSetIteratorImpl.java:3068)
at oracle.jbo.server.ViewRowSetImpl.notifyRefresh(ViewRowSetImpl.java:2785)
at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1259)
at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1060)
at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2810)
at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2787)
at oracle.jbo.server.ViewRowSetIteratorImpl.first(ViewRowSetIteratorImpl.java:1616)
at oracle.jbo.server.ViewRowSetImpl.first(ViewRowSetImpl.java:3544)
at oracle.jbo.server.ViewObjectImpl.first(ViewObjectImpl.java:10165)
at oracle.adf.model.binding.DCIteratorBinding.setupRSIstate(DCIteratorBinding.java:779)
at oracle.adf.model.binding.DCIteratorBinding.refreshControl(DCIteratorBinding.java:679)
at oracle.jbo.uicli.binding.JUIteratorBinding.refreshControl(JUIteratorBinding.java:474)
at oracle.adf.model.binding.DCIteratorBinding.refresh(DCIteratorBinding.java:4474)
at oracle.adf.model.binding.DCExecutableBinding.refreshIfNeeded(DCExecutableBinding.java:347)
at oracle.adf.model.binding.DCIteratorBinding.getRowSetIterator(DCIteratorBinding.java:1605)
at oracle.jbo.jbotester.panel.BindingPanel.setBindingContext(BindingPanel.java:116)
at oracle.jbo.jbotester.panel.BindingPanel.<init>(BindingPanel.java:88)
at oracle.jbo.jbotester.panel.BindingPanel.<init>(BindingPanel.java:71)
at oracle.jbo.jbotester.form.BindingForm.createMasterPanel(BindingForm.java:63)
at oracle.jbo.jbotester.form.BindingForm.init(BindingForm.java:98)
at oracle.jbo.jbotester.form.JTForm.<init>(JTForm.java:72)
at oracle.jbo.jbotester.form.BindingForm.<init>(BindingForm.java:50)
at oracle.jbo.jbotester.form.FormType$1.createForm(FormType.java:63)
at oracle.jbo.jbotester.form.FormType.createForm(FormType.java:199)
at oracle.jbo.jbotester.form.FormType.createTab(FormType.java:270)
at oracle.jbo.jbotester.form.FormType.showForm(FormType.java:248)
at oracle.jbo.jbotester.form.FormType.showForm(FormType.java:207)
at oracle.jbo.jbotester.form.FormType.showForm(FormType.java:203)
at oracle.jbo.jbotester.tree.ObjTreeNode.showForm(ObjTreeNode.java:140)
at oracle.jbo.jbotester.tree.ObjTreeNode.showForm(ObjTreeNode.java:123)
at oracle.jbo.jbotester.tree.ObjTreeNode$ShowAction.doAction(ObjTreeNode.java:399)
at oracle.jbo.jbotester.AbstractJboAction.actionPerformed(AbstractJboAction.java:97)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:809)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:850)
at java.awt.Component.processMouseEvent(Component.java:6289)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6054)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4652)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
at java.awt.EventQueue.access$000(EventQueue.java:85)
at java.awt.EventQueue$1.run(EventQueue.java:603)
at java.awt.EventQueue$1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
at java.awt.EventQueue$2.run(EventQueue.java:617)
at java.awt.EventQueue$2.run(EventQueue.java:615)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.sql.SQLException: Invalid column index
at oracle.jdbc.driver.OracleResultSetImpl.getBytes(OracleResultSetImpl.java:1494)
at oracle.jbo.domain.Number$1facClass.createDatum(Number.java:113)
at oracle.jbo.server.OracleSQLBuilderImpl.doLoadFromResultSet(OracleSQLBuilderImpl.java:1326)
... 81 more
## Detail 0 ##
java.sql.SQLException: Invalid column index
at oracle.jdbc.driver.OracleResultSetImpl.getBytes(OracleResultSetImpl.java:1494)
at oracle.jbo.domain.Number$1facClass.createDatum(Number.java:113)
at oracle.jbo.server.OracleSQLBuilderImpl.doLoadFromResultSet(OracleSQLBuilderImpl.java:1326)
at oracle.jbo.server.AttributeDefImpl.loadFromResultSet(AttributeDefImpl.java:2536)
at oracle.jbo.server.ViewRowImpl.populate(ViewRowImpl.java:3885)
at oracle.jbo.server.ViewDefImpl.createInstanceFromResultSet(ViewDefImpl.java:2555)
at oracle.jbo.server.ViewObjectImpl.createRowFromResultSet(ViewObjectImpl.java:6044)
at oracle.jbo.server.ViewObjectImpl.createInstanceFromResultSet(ViewObjectImpl.java:5822)
at oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:3693)
at oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:3548)
at oracle.jbo.server.QueryCollection.get(QueryCollection.java:2261)
at oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:5111)
at oracle.jbo.server.ViewRowSetIteratorImpl.doFetch(ViewRowSetIteratorImpl.java:2971)
at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2827)
at oracle.jbo.server.ViewRowSetIteratorImpl.refresh(ViewRowSetIteratorImpl.java:3068)
at oracle.jbo.server.ViewRowSetImpl.notifyRefresh(ViewRowSetImpl.java:2785)
at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1259)
at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1060)
at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2810)
at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2787)
at oracle.jbo.server.ViewRowSetIteratorImpl.first(ViewRowSetIteratorImpl.java:1616)
at oracle.jbo.server.ViewRowSetImpl.first(ViewRowSetImpl.java:3544)
at oracle.jbo.server.ViewObjectImpl.first(ViewObjectImpl.java:10165)
at oracle.adf.model.binding.DCIteratorBinding.setupRSIstate(DCIteratorBinding.java:779)
at oracle.adf.model.binding.DCIteratorBinding.refreshControl(DCIteratorBinding.java:679)
at oracle.jbo.uicli.binding.JUIteratorBinding.refreshControl(JUIteratorBinding.java:474)
at oracle.adf.model.binding.DCIteratorBinding.refresh(DCIteratorBinding.java:4474)
at oracle.adf.model.binding.DCExecutableBinding.refreshIfNeeded(DCExecutableBinding.java:347)
at oracle.adf.model.binding.DCIteratorBinding.getRowSetIterator(DCIteratorBinding.java:1605)
at oracle.jbo.jbotester.panel.BindingPanel.setBindingContext(BindingPanel.java:116)
at oracle.jbo.jbotester.panel.BindingPanel.<init>(BindingPanel.java:88)
at oracle.jbo.jbotester.panel.BindingPanel.<init>(BindingPanel.java:71)
at oracle.jbo.jbotester.form.BindingForm.createMasterPanel(BindingForm.java:63)
at oracle.jbo.jbotester.form.BindingForm.init(BindingForm.java:98)
at oracle.jbo.jbotester.form.JTForm.<init>(JTForm.java:72)
at oracle.jbo.jbotester.form.BindingForm.<init>(BindingForm.java:50)
at oracle.jbo.jbotester.form.FormType$1.createForm(FormType.java:63)
at oracle.jbo.jbotester.form.FormType.createForm(FormType.java:199)
at oracle.jbo.jbotester.form.FormType.createTab(FormType.java:270)
at oracle.jbo.jbotester.form.FormType.showForm(FormType.java:248)
at oracle.jbo.jbotester.form.FormType.showForm(FormType.java:207)
at oracle.jbo.jbotester.form.FormType.showForm(FormType.java:203)
at oracle.jbo.jbotester.tree.ObjTreeNode.showForm(ObjTreeNode.java:140)
at oracle.jbo.jbotester.tree.ObjTreeNode.showForm(ObjTreeNode.java:123)
at oracle.jbo.jbotester.tree.ObjTreeNode$ShowAction.doAction(ObjTreeNode.java:399)
at oracle.jbo.jbotester.AbstractJboAction.actionPerformed(AbstractJboAction.java:97)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:809)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:850)
at java.awt.Component.processMouseEvent(Component.java:6289)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6054)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4652)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
at java.awt.EventQueue.access$000(EventQueue.java:85)
at java.awt.EventQueue$1.run(EventQueue.java:603)
at java.awt.EventQueue$1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
at java.awt.EventQueue$2.run(EventQueue.java:617)
at java.awt.EventQueue$2.run(EventQueue.java:615)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
[133] JUErrorHandlerDlg.reportException(oracle.jbo.AttributeLoadException)
[134] LoadFromResultSet failed (8)
[135] DCBindingContainer.reportException :oracle.jbo.AttributeLoadException
[136] oracle.jbo.AttributeLoadException: JBO-27021: Failed to load custom data type value at index 8 with java object of type oracle.jbo.domain.Number due to java.sql.SQLException.
at oracle.jbo.server.OracleSQLBuilderImpl.doLoadFromResultSet(OracleSQLBuilderImpl.java:1375)
at oracle.jbo.server.AttributeDefImpl.loadFromResultSet(AttributeDefImpl.java:2536)
at oracle.jbo.server.ViewRowImpl.populate(ViewRowImpl.java:3885)
at oracle.jbo.server.ViewDefImpl.createInstanceFromResultSet(ViewDefImpl.java:2555)
at oracle.jbo.server.ViewObjectImpl.createRowFromResultSet(ViewObjectImpl.java:6044)
at oracle.jbo.server.ViewObjectImpl.createInstanceFromResultSet(ViewObjectImpl.java:5822)
at oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:3693)
at oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:3548)
at oracle.jbo.server.QueryCollection.get(QueryCollection.java:2261)
at oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:5111)
at oracle.jbo.server.ViewRowSetIteratorImpl.doFetch(ViewRowSetIteratorImpl.java:2971)
at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2827)
at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2787)
at oracle.jbo.server.ViewRowSetIteratorImpl.first(ViewRowSetIteratorImpl.java:1616)
at oracle.jbo.server.ViewRowSetImpl.first(ViewRowSetImpl.java:3544)
at oracle.jbo.server.ViewObjectImpl.first(ViewObjectImpl.java:10165)
at oracle.adf.model.binding.DCIteratorBinding.internalGetCurrentRowInBinding(DCIteratorBinding.java:2258)
at oracle.jbo.uicli.binding.JUIteratorBinding.internalGetCurrentRowInBinding(JUIteratorBinding.java:500)
at oracle.adf.model.binding.DCIteratorBinding.getCurrentRow(DCIteratorBinding.java:2203)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.internalCheckPermission(JUCtrlActionBinding.java:2050)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.isOperationEnabled(JUCtrlActionBinding.java:325)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.isActionEnabled(JUCtrlActionBinding.java:296)
at oracle.jbo.uicli.controls.JUNavigationBar._isEnabled(JUNavigationBar.java:1342)
at oracle.jbo.uicli.controls.JUNavigationBar._updateButtonStates(JUNavigationBar.java:1331)
at oracle.jbo.jbotester.NavigationBar._updateButtonStates(NavigationBar.java:99)
at oracle.jbo.uicli.controls.JUNavigationBar$3.run(JUNavigationBar.java:1246)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:642)
at java.awt.EventQueue.access$000(EventQueue.java:85)
at java.awt.EventQueue$1.run(EventQueue.java:603)
at java.awt.EventQueue$1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:612)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
at java.awt.Dialog$1.run(Dialog.java:1046)
at java.awt.Dialog$3.run(Dialog.java:1098)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Dialog.java:1096)
at java.awt.Component.show(Component.java:1585)
at java.awt.Component.setVisible(Component.java:1537)
at java.awt.Window.setVisible(Window.java:842)
at java.awt.Dialog.setVisible(Dialog.java:986)
at oracle.jbo.uicli.controls.JUErrorDialog.showError(JUErrorHandlerDlg.java:289)
at oracle.jbo.uicli.controls.JUErrorHandlerDlg$1myRunnable.run(JUErrorHandlerDlg.java:370)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:642)
at java.awt.EventQueue.access$000(EventQueue.java:85)
at java.awt.EventQueue$1.run(EventQueue.java:603)
at java.awt.EventQueue$1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:612)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.sql.SQLException: Invalid column index
at oracle.jdbc.driver.OracleResultSetImpl.getBytes(OracleResultSetImpl.java:1494)
at oracle.jbo.domain.Number$1facClass.createDatum(Number.java:113)
at oracle.jbo.server.OracleSQLBuilderImpl.doLoadFromResultSet(OracleSQLBuilderImpl.java:1326)
... 60 more
## Detail 0 ##
java.sql.SQLException: Invalid column index
at oracle.jdbc.driver.OracleResultSetImpl.getBytes(OracleResultSetImpl.java:1494)
at oracle.jbo.domain.Number$1facClass.createDatum(Number.java:113)
at oracle.jbo.server.OracleSQLBuilderImpl.doLoadFromResultSet(OracleSQLBuilderImpl.java:1326)
at oracle.jbo.server.AttributeDefImpl.loadFromResultSet(AttributeDefImpl.java:2536)
at oracle.jbo.server.ViewRowImpl.populate(ViewRowImpl.java:3885)
at oracle.jbo.server.ViewDefImpl.createInstanceFromResultSet(ViewDefImpl.java:2555)
at oracle.jbo.server.ViewObjectImpl.createRowFromResultSet(ViewObjectImpl.java:6044)
at oracle.jbo.server.ViewObjectImpl.createInstanceFromResultSet(ViewObjectImpl.java:5822)
at oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:3693)
at oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:3548)
at oracle.jbo.server.QueryCollection.get(QueryCollection.java:2261)
at oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:5111)
at oracle.jbo.server.ViewRowSetIteratorImpl.doFetch(ViewRowSetIteratorImpl.java:2971)
at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2827)
at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2787)
at oracle.jbo.server.ViewRowSetIteratorImpl.first(ViewRowSetIteratorImpl.java:1616)
at oracle.jbo.server.ViewRowSetImpl.first(ViewRowSetImpl.java:3544)
at oracle.jbo.server.ViewObjectImpl.first(ViewObjectImpl.java:10165)
at oracle.adf.model.binding.DCIteratorBinding.internalGetCurrentRowInBinding(DCIteratorBinding.java:2258)
at oracle.jbo.uicli.binding.JUIteratorBinding.internalGetCurrentRowInBinding(JUIteratorBinding.java:500)
at oracle.adf.model.binding.DCIteratorBinding.getCurrentRow(DCIteratorBinding.java:2203)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.internalCheckPermission(JUCtrlActionBinding.java:2050)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.isOperationEnabled(JUCtrlActionBinding.java:325)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.isActionEnabled(JUCtrlActionBinding.java:296)
at oracle.jbo.uicli.controls.JUNavigationBar._isEnabled(JUNavigationBar.java:1342)
at oracle.jbo.uicli.controls.JUNavigationBar._updateButtonStates(JUNavigationBar.java:1331)
at oracle.jbo.jbotester.NavigationBar._updateButtonStates(NavigationBar.java:99)
at oracle.jbo.uicli.controls.JUNavigationBar$3.run(JUNavigationBar.java:1246)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:642)
at java.awt.EventQueue.access$000(EventQueue.java:85)
at java.awt.EventQueue$1.run(EventQueue.java:603)
at java.awt.EventQueue$1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:612)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
at java.awt.Dialog$1.run(Dialog.java:1046)
at java.awt.Dialog$3.run(Dialog.java:1098)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Dialog.java:1096)
at java.awt.Component.show(Component.java:1585)
at java.awt.Component.setVisible(Component.java:1537)
at java.awt.Window.setVisible(Window.java:842)
at java.awt.Dialog.setVisible(Dialog.java:986)
at oracle.jbo.uicli.controls.JUErrorDialog.showError(JUErrorHandlerDlg.java:289)
at oracle.jbo.uicli.controls.JUErrorHandlerDlg$1myRunnable.run(JUErrorHandlerDlg.java:370)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:642)
at java.awt.EventQueue.access$000(EventQueue.java:85)
at java.awt.EventQueue$1.run(EventQueue.java:603)
at java.awt.EventQueue$1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:612)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)The Is Updatable attribute on the EO is false which I assume is the same as never. Here is the current config for it:
<Attribute
Name="StoreCount"
IsUpdateable="false"
IsQueriable="false"
IsPersistent="false"
Precision="5"
Scale="0"
ColumnName="STORECOUNT"
SQLType="NUMERIC"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
Expression="(select coalesce(count(*),0) as StoreCount from table2 where my_id = table1.my_id)">
<Properties>
<SchemaBasedProperties>
<LABEL
ResId="STORE_COUNT"/>
</SchemaBasedProperties>
</Properties>
</Attribute>
This attribute is in the same order in the VO and it is in the EO. The VO code is as follows:
<ViewAttribute
Name="StoreCount"
IsUpdateable="false"
IsQueriable="false"
IsPersistent="false"
PrecisionRule="true"
EntityAttrName="StoreCount"
EntityUsage="MyTable2EO"/>
The VORowImpl has the attributes in the same order as well.
Do you have any additional suggestions. -
Treasury deals without bank details not updated in CM report
Hi all,
when creating a deal in Transaction Manager via trans. code FTR_CREATE without Bank details the respective cash flows data are not transferred to Cash Management report FF70 due to some reason. please note, that planning level Bank unknown (Derived from Table T036V ) is specified per every financial instrument in question in Customizing ( TRM -> Transaction manager -> General settings -> Link to Cash Management -> Assign Planning Levels ).
In this case I would expect an entry to appear in the Cash Management report FF70, in a respective Grouping and on earlier mentioned Planning Level Bank unknown on the respective payment dates. However I cannot find those entries there.
On the other hand update of CM report FF70 works fine when bank details are specified in the tab Payment details on a deal level.
appreciate your suggestions/ solutions for this issue.
BR,
RenatasHi Renatas,
Yes, I believe so. As per my understanding, all transactions can be shown either under a bank or a customer in a CM report. (Keeping aside Vendors as we are not considering them at the moment).
In your case, since you don't specify the bank details, the transaction is bound to appear under Customer.
Until the transaction is posted, it will appear in the Customer row with planning level which you have maintained for Bank Unknown case. And after posting, it will move to planning group (thus level) which you have maintained in the customer master.
The above explaination is solely based on my experience of testing various scenarios. You may try it in your development box before confirming.
Hope it resolves your issue.
Thanks and regards,
Abhinav -
Restart number is not in the check file or is not a From-number
HI!
I had posted payment Document but i got below error while reprint check from FBZ5
Restart number is not in the check file or is not a From-number
"Message no. FS562"
on that base, I had check below settinng
1) I had check Cheque no register . It's proper in series.
2)Tcd:FBZP -> Pmt methods in country -> select your country
and payment method 'C'. If 'Bank details' is checked on, then bank
details of vendor master is mandatory for that payment.
Awaiting for reply soon,
thanking you,
Rupang shahHi,
Commonly it will come for below situations:
1. Client decided to use this check lots for manual payment & this checks already used, so this type of checks system not allowed to take reprint.
2. You can only reprint checks created with F110, FBZ4, F-58 or FBZ5 (this checks have been printed by the system)
Check the Payment method wise checks it is already issued / not PAYR - RZAWE
system not allowed to reprint already exist in PAYR table checks.
if you already use one check with payment method C now you want to use the same lot for payment method X then system not allow to print.
Regards,
Viswa -
CRM To ECC Sold to party Communication Details Not populated in ECC
Hi All
i have one problem when we create sales order through crmd_order we need to give sold to party and ship to party numbers suppose like
8000002166 for both and status i keep as order created and in partner tab i i seem all partner funtions(sold to, ship to ,bill to, payer)with 8000002166
in header overivew i given posting date as feature date like 30-09-2013 then i try to save this order.
the order generated sucussfully but problem is i am not getting sold to party details in ECC when i check VA03 And open cretaed order in CRM and clicking on sold to party and i seem details for this but i am not getting communication details like telephone number and email id extension number.
for this sold to party we already maintained all communication details in CRM.When i open this sold to party BP i am able to see all details
didnt understand why these details not replicated to ECC?
We implemented one custom class there we implemented badi.
IF_EX_CRM_DATAEXCHG_BADI~CRM_DATAEXCH_AFTER_BAPI_FILL
i am not getting BAPI ADDRESS Table values into CT_BAPIADDR1
how can i send communciation details to ECC For sold to party?
The code part we follow like below
TYPES : BEGIN OF t_otc, " Type to create a table with the given columns.
bpid TYPE bu_partner, " variable of store processed business partner ID's
otcid TYPE bu_partner, " variable of store processed OTC ID's
otcguid TYPE bu_partner_guid, " variable of store processed OTC GUID's
address TYPE bapibus1006_address,
tel1_numbr TYPE ad_tlnmbr1,
tel1_ext TYPE ad_tlxtns1,
e_mail TYPE ad_smtpadr,
END OF t_otc.
*& V A R I A B L E S &*
DATA : lv_bp_payer TYPE bu_partner, " Variable To Cast the payer Id into BU_Partner data type.
lv_partner_fct TYPE crmt_partner_fct, " Variable To Store Partner Function Number.
lv_partner TYPE bu_partner, " Variable To Store Current Business Partner ID.
lv_process_type TYPE crmt_process_type, " Variable to Store process type.
lv_sales_org TYPE crmt_sales_org, " Variable to store sales org. name of order
lv_dis_channel TYPE crmt_distribution_channel, " Variable to store distribution channel of order.
lv_division TYPE crmt_division, " Variable to store division of sales org. data.
lv_role TYPE comt_partner_parvw, " Variable to store retrieved role from FM.
lv_role_value TYPE parvw, " Variable to store the role value of Partner Functions.
lv_otc_guid TYPE bu_partner_guid, " Variable to store OTC GUIDs for the OTC ID.
lv_otc_id TYPE kunnr. " Varaible to OTC ID revocered from Table.
DATA: lv_busspartner TYPE bapibus1006_head-bpartner,
lw_central_data TYPE bapibus1006_central,
lw_centraldata_person TYPE bapibus1006_central_person.
*& W O R K A R E A S &*
DATA : lw_address TYPE bapibus1006_address, " Work Area to store address recovered for BPID.
*Start of code change for Defect 904 Fix
lw_tel TYPE bapiadtel,
lw_email TYPE bapiadsmtp.
*End of code change for Defect 904 Fix
*& INTERNAL TABLES &*
DATA : li_otc TYPE TABLE OF t_otc, " Internal Table to Store the OTC IDs and BPS.
li_values TYPE zconst_values_t,
*Start of code change for Defect 904 Fix
li_tel TYPE STANDARD TABLE OF bapiadtel,
li_email TYPE STANDARD TABLE OF bapiadsmtp.
*End of code change for Defect 904 Fix
* F I E L D - S Y M B O L S *
FIELD-SYMBOLS: <f_orderadm> TYPE bad_orderadm_h_mess,
<f_otc> TYPE t_otc, " Field-Symbol to Read the OTC TABLE data.
<f_partner> TYPE bad_partner_mess, " Field-Symbol of Partner Table For Looping.
<f_bapiparnr3> TYPE bapiparnr3, " Field-Symbol to Store The Row of BAPIPARNR3.
<f_bapiaddr1> TYPE bapiaddr1,
<f_orgman> TYPE bad_orgman_mess, " Field-Symbol to Read the ORGMAN table.
<f_values> TYPE zcr_const_values.
*& C O N S T A N T S &*
CONSTANTS : lc_program_name TYPE progname VALUE 'ZOTC',
lc_param_payer TYPE paramname VALUE 'PAYER', " Constant to Store Payer Parameter name.
lc_ref_kind TYPE crmt_object_kind VALUE 'A',
lc_req_1 TYPE zrequest_no VALUE '1',
lc_req_2 TYPE zrequest_no VALUE '2'.
* Retrieving the general and Common Data for a Order.
READ TABLE it_bus_trans_msg-orderadm_h INDEX 1 ASSIGNING <f_orderadm>.
IF sy-subrc EQ 0.
lv_process_type = <f_orderadm>-process_type.
ENDIF.
* Reading the Orgnisation Details from ORGMAN Table.
READ TABLE it_bus_trans_msg-orgman WITH KEY ref_kind = lc_ref_kind ASSIGNING <f_orgman>.
IF sy-subrc EQ 0.
* Storing the Sales Organisational Data to find the OTC_ID.
lv_sales_org = <f_orgman>-sales_org.
lv_dis_channel = <f_orgman>-dis_channel.
lv_division = <f_orgman>-division.
ENDIF.
* Retrieving the partner function number for the payer by giving requirement no 2 and rule no 1.
CALL FUNCTION 'ZCRAN_GET_CONSTANT_VALUES'
EXPORTING
pi_program_name = lc_program_name
pi_req_no = lc_req_2
IMPORTING
po_const_values = li_values.
IF sy-subrc <> 0.
RETURN.
ENDIF.
* Reading the value for the constant with the name as PAYER.
READ TABLE li_values WITH KEY param_name = lc_param_payer ASSIGNING <f_values>.
IF sy-subrc NE 0.
RETURN.
ENDIF.
* Retrieving the Partner ID for the PAYER.
READ TABLE it_bus_trans_msg-partner ASSIGNING <f_partner> WITH KEY ref_partner_fct = <f_values>-constant_value.
IF sy-subrc EQ 0.
* Storing the current partner ID.
lv_bp_payer = <f_partner>-ref_partner_no.
ENDIF.
REFRESH li_values.
* Retrieving the Partner Function Number which are to be checked for replacing with the OTC ID with request no 1 and rule no 01.
CALL FUNCTION 'ZCRAN_GET_CONSTANT_VALUES'
EXPORTING
pi_program_name = lc_program_name
pi_req_no = lc_req_1
IMPORTING
po_const_values = li_values.
IF sy-subrc <> 0.
RETURN.
ENDIF.
* Transferring the constant value to our table for Partner Fucntion.
LOOP AT li_values ASSIGNING <f_values>.
* Read Partner table for Header data and the reference partner function retrieved.
READ TABLE it_bus_trans_msg-partner WITH KEY ref_kind = lc_ref_kind ref_partner_fct = <f_values>-constant_value ASSIGNING <f_partner>.
IF sy-subrc EQ 0.
* Storing Current Partner Function.
lv_partner_fct = <f_partner>-ref_partner_fct.
* Storing Current Partner No.
lv_partner = <f_partner>-ref_partner_no.
* Retrieving the Partner Role (R/3) for the current partner function of CRM.
CALL FUNCTIONThe problem is in the Lotus Notes security level, not in SAP.
-
Can users have one iTunes library deriving from two drives?
Hi everyone,
I keep my 4 & 5 star songs on my C drive and the rest (all stars, 1,2 3, etc.) on my exhternal hard drive.
Whenever I want to listen to my music, all I can readily play are the tunes on my C drive.
I'm guessing the issues having one library for tunes stored on separate drives is insurmountable?
I say that because I'm guessing that my iPod (4th gen) is only capable of importing from one library?
I think the biggest issue is either I don't know how to (or maybe users can't) list a second drive so that iTunes can load all songs from both drives whenever I do have the second drive up and running.
Adding to the second drive library issue, I can't figure out how to permanently tag my external HD's (I've got 6) so that their drive letter is not automatically defaulting to their order of prescence.
I can deal with that issue by simply not opening iTunes while I the second drive has been assigned a drive letter other than what iTunes (hopefully) is set to (i.e.; hopefully C and F drives).
But can users have one iTunes library deriving from two drives?Seems I've over come what is something I'd hoped/expected iTunes would be capable of (ie; reinitiating the pathway for external HD music files when their drive letter is the only thing that changed).
I tried the obvious by going to iTunes's Edit>Preferences>Advanced and clicking the change button for "iTunes Music folder location", then entered the current drive and pathway (as the drive is currently assigned, F as opposed to the original G) and of course iTunes still couldn;t find the missing tunes.
Giving up on the hope that iTunes was designed smarter than it is (ie; each and every single missing tune req's manual redirection of pathway, as opposed to a preferable tick box for something like 'use the last redirected pathway').
And I finally figured out how to properly changed drive letter assignments, but still uncertasin if that means permanently tags my EHD's with that drive letter.
For that to be permanent, maybe I need to name each drive regardless that Windows already has unique inforamtion on each HD. Suppose I'll soon find out if the drive at this point has fianlly stored its drive name and whether or not Windows will contiue to change the EHD drive letters simply by the order which I am introducing them to the os.
No real luck with rats nest USB hubs as they crash my os alot, so I'm left to trying to find an easy way of managing the EHD drive assignments. THe following is the closest I've yet to come to doing that:
Click Start>Control Panel>Administrative Tools>Computer Management, and then in the left pane, under Storage, click Disk Management.
Right-click the drive, partition, logical drive, or volume for which you want to assign a drive letter, and then click Change Drive Letter and Paths.
Click Change.
Click Assign the following drive letter (if it is not already selected), click the drive letter that you want to use, and then click OK.
Click Yes when you are prompted to confirm the drive letter change.
Again, too bad iTunes doesn't afford a 'find' feature for 'missing' files such that one might be afforded a tick box for 'do not prompt again, instead use the last indicated location for "iTunes Music" folder as the base storage location'.
This drive renaming thing is a real hassle. Not like somebody couldn't have guessed it and Windows and/or iTunes can't afford some script, etc. to better manage 'tagging' EHD's and/or re-locating 'missing' tunes.
But then what would we have to complain about, not that they listen anyway.
Maybe you are looking for
-
Can I transfer music from an iTunes account into another
I'm getting a new phone plan an I want to get my own iTunes account as well but I don't want to have to pay for all the music I have on my parents account so is it possible to transfer it with out having to burn a CD and put it on my account
-
My mac won't recognize my external hardrive!!
I have a Maxtor One Touch II 300GB external hardrive with all of my pics and backups, and ever since I installed Leopard it won't recognize the drive. I've read other forums and know it's because it's password protected and Seagate or Apple has come
-
Solaris 10 with Qlogic card facing network issue
Dear Community, I am facing network issue with one of M5000 server card vender is qlogic and switch is brocarde, if we reset the port from switch side, it will work for nearly 2 hours. after that ping will stop. here is the details. and there is no e
-
6600GT not working with K8T neo-FIS2R
I recently returned a K8T NEO-FIS2R MB for repair. The problem was that the PS/2 and USB ports were broken. However the MB has been returned and the PS/2 and USB ports work fine. I posted about this several months ago. Now the AGP port seems to be br
-
Hi All, I need one help. I have one java class under package com.abc and other java class under default package. How do I access java class under default package from java class under com.abc package?. Waiting for reply. Thanks