Venue 11 Pro - Slim Keyboard not behaving as expected or it should.

I recently received the slim keyboard from dell for my Venue 11 Pro - Baytrail tablet. Overall I like the quality and functionality, although I too like others have encountered the intermittent non-functional keyboard, but that's not the subject of this post.
I have noticed a couple items in its behavior that don't work as you would expect and I hope can be corrected via software.
1. When the keyboard is attached but folded back behind the tablet (ie the keyboard is not in use) the on screen keyboard will not appear. This makes it hard to use the device as a tablet as anytime data entry is required you need to unfold the keyboard and hold it somehow while you type then fold it back behind the screen to continue tablet use. When folding the keyboard behind the unit its just as important to make the on screen keyboard available as it is to stop the keyboard itself from functioning, right now the keyboard stops working as it should be no alternative input is available.
2. In much the same way as item #1. When the keyboard is attached but folded back behind the tablet orientation is locked so the screen will not rotate to portrait or landscape mode at need. So if you were carrying it with the cover / slim keyboard on and opened it up, folding the keyboard behind the screen the screen is stuck in landscape mode. The only method ive found to change its orientation is to go to desktop and run the intel graphics app to edit the orientation.
Combined this makes the slim keyboard worse than useless in several usage scenarios. I want the slim keyboard for the occasional need to input more data than is practical on the touch screen AND to protect the tablet.... but if your usage is more tablet than notebook you will find yourself constantly working around these limitations.
You have a great product here, but you really need to take a page from the surface playbook here. They kind of set the standard and expectations for how keyboard covers on tablets should work and while I really like the hardware the usage is awkward as it stands.

Just got our first Venue 11 into the office and was very disappointed to find this thread already active. Yes, this is a very simple use-case where someone will have the slim keyboard connected and then flip it back to use the onscreen keyboard for the modern UI. Auto screen rotation and pop-up onscreen keyboard really are a must when the keyboard is flipped back. Not sure how that very basic behavior could have been missed in testing. Hoping for a resolution soon...

Similar Messages

Keyboard not working as expected

I woke up this morning and suddenly found a few problems with my keyboard:
The caps lock light is reversed so that the caps is off when the light is on and vice versa
The placement of some of the symbols are moved around. The @ is to the right of the P button and Shift-2 produces a ". Shift-9 is ), shift-8 is ( and many other switched like this.
Resetting PRAM or the computer doesnt fix this

Hello there, morris152.
The following Knowlede Base article provides some great information for troubleshooting your issue with the keyboard:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Particularly:
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Accessibilty or Universal Access pane in System Preferences, then click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Accessibilty or Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

BDC not behaving as expected

Hi all,
I had done BDC for FB05. It was working fine.
Now the requirement changed a bit and I need to pass one more field special gl indicator.
So I added a line in the FM i created using the recording and expected that bdc should work fine. But it didn't . The filed get populated correctly but then the next screen data is not getting populated . Any Idea what could be the problem.
perform bdc_field       using 'RF05A-NEWUM'
                              SPL_GL_LINE_1.
FUNCTION ZFM_FB05_BDC_BILL.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(CTU) LIKE APQI-PUTACTIVE DEFAULT 'X'
*"     VALUE(MODE) LIKE APQI-PUTACTIVE DEFAULT 'N'
*"     VALUE(UPDATE) LIKE APQI-PUTACTIVE DEFAULT 'L'
*"     VALUE(GROUP) LIKE APQI-GROUPID OPTIONAL
*"     VALUE(USER) LIKE APQI-USERID OPTIONAL
*"     VALUE(KEEP) LIKE APQI-QERASE OPTIONAL
*"     VALUE(HOLDDATE) LIKE APQI-STARTDATE OPTIONAL
*"     VALUE(NODATA) LIKE APQI-PUTACTIVE DEFAULT '/'
*"     VALUE(BLDAT_001) LIKE BDCDATA-FVAL DEFAULT '09/09/2010'
*"     VALUE(BLART_002) LIKE BDCDATA-FVAL DEFAULT 'sa'
*"     VALUE(BUKRS_003) LIKE BDCDATA-FVAL DEFAULT 'K101'
*"     VALUE(BUDAT_004) LIKE BDCDATA-FVAL DEFAULT '09/09/2010'
*"     VALUE(MONAT_005) LIKE BDCDATA-FVAL DEFAULT '9'
*"     VALUE(WAERS_006) LIKE BDCDATA-FVAL DEFAULT 'USD'
*"     VALUE(DOCID_007) LIKE BDCDATA-FVAL DEFAULT '*'
*"     VALUE(NEWBS_008) LIKE BDCDATA-FVAL DEFAULT '09'
*"     VALUE(NEWKO_009) LIKE BDCDATA-FVAL DEFAULT '1000021'
*"     VALUE(SPL_GL_LINE_1) LIKE BDCDATA-FVAL DEFAULT '2'
*"     VALUE(WRBTR_010) LIKE BDCDATA-FVAL DEFAULT '100'
*"     VALUE(ZFBDT_011) LIKE BDCDATA-FVAL DEFAULT '09/09/2010'
*"     VALUE(AGBUK_012) LIKE BDCDATA-FVAL DEFAULT 'K101'
*"     VALUE(AGKON_013) LIKE BDCDATA-FVAL DEFAULT '100000'
*"     VALUE(AGKOA_014) LIKE BDCDATA-FVAL DEFAULT 'D'
*"     VALUE(AGUMS_015) LIKE BDCDATA-FVAL DEFAULT '1'
*"     VALUE(XNOPS_016) LIKE BDCDATA-FVAL DEFAULT ''
*"     VALUE(ABPOS_017) LIKE BDCDATA-FVAL DEFAULT '1'
*"     VALUE(ABPOS_018) LIKE BDCDATA-FVAL DEFAULT '1'
*"     VALUE(ABPOS_019) LIKE BDCDATA-FVAL DEFAULT '1'
*"     VALUE(ABPOS_020) LIKE BDCDATA-FVAL DEFAULT '1'
*"     VALUE(XPOS1_01_021) LIKE BDCDATA-FVAL DEFAULT ''
*"     VALUE(XPOS1_03_022) LIKE BDCDATA-FVAL DEFAULT 'X'
*"     VALUE(SEL01_01_023) LIKE BDCDATA-FVAL DEFAULT '100000002'
*"     VALUE(ABPOS_024) LIKE BDCDATA-FVAL DEFAULT '1'
*"     VALUE(ABPOS_025) LIKE BDCDATA-FVAL DEFAULT '1'
*"     VALUE(ABPOS_026) LIKE BDCDATA-FVAL DEFAULT '1'
*"     VALUE(PSZAH_01_027) LIKE BDCDATA-FVAL DEFAULT '             50'
*"     VALUE(ABPOS_028) LIKE BDCDATA-FVAL DEFAULT '1'
*"     VALUE(ABPOS_029) LIKE BDCDATA-FVAL DEFAULT '1'
*"     VALUE(XPOS1_01_030) LIKE BDCDATA-FVAL DEFAULT ''
*"     VALUE(XPOS1_03_031) LIKE BDCDATA-FVAL DEFAULT 'X'
*"     VALUE(SEL01_01_032) LIKE BDCDATA-FVAL DEFAULT '100000000'
*"     VALUE(ABPOS_033) LIKE BDCDATA-FVAL DEFAULT '1'
*"     VALUE(ABPOS_034) LIKE BDCDATA-FVAL DEFAULT '1'
*"     VALUE(ABPOS_035) LIKE BDCDATA-FVAL DEFAULT '1'
*"     VALUE(PSZAH_01_036) LIKE BDCDATA-FVAL DEFAULT '             50'
*"     VALUE(ABPOS_037) LIKE BDCDATA-FVAL DEFAULT '1'
*"     VALUE(DOC_LIST) TYPE ZTT_DOC_LIST
*" EXPORTING
*"     VALUE(SUBRC) LIKE SYST-SUBRC
*" TABLES
*"      MESSTAB STRUCTURE BDCMSGCOLL OPTIONAL
data wa_doc_list type zst_doc_list.
subrc = 0.
perform bdc_nodata      using NODATA.
perform open_group      using GROUP USER KEEP HOLDDATE CTU.
perform bdc_dynpro      using 'SAPMF05A' '0122'.
perform bdc_field       using 'BKPF-BLDAT'
                              BLDAT_001.
perform bdc_field       using 'BKPF-BLART'
                              BLART_002.
perform bdc_field       using 'BKPF-BUKRS'
                              BUKRS_003.
perform bdc_field       using 'BKPF-BUDAT'
                              BUDAT_004.
perform bdc_field       using 'BKPF-MONAT'
                              MONAT_005.
perform bdc_field       using 'BKPF-WAERS'
                              WAERS_006.
perform bdc_field       using 'FS006-DOCID'
                              DOCID_007.
perform bdc_field       using 'RF05A-NEWBS'
                              NEWBS_008.
perform bdc_field       using 'RF05A-NEWKO'
                              NEWKO_009.
*perform bdc_field       using 'RF05A-NEWUM'
*                              SPL_GL_LINE_1. " Uncomment this line and the next screen '0301' values don't get populated.
perform bdc_field       using 'BDC_CURSOR'
                              'RF05A-NEWUM'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF05A' '0301'.
perform bdc_field       using 'BDC_CURSOR'
                              'BSEG-WRBTR'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SL'.
perform bdc_field       using 'BSEG-WRBTR'
                              WRBTR_010.
perform bdc_field       using 'BSEG-ZFBDT'
                              ZFBDT_011.
perform bdc_dynpro      using 'SAPMF05A' '0710'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF05A-AGUMS'.
perform bdc_field       using 'BDC_OKCODE'
                              '=PA'.
perform bdc_field       using 'RF05A-AGBUK'
                              AGBUK_012.
perform bdc_field       using 'RF05A-AGKON'
                              AGKON_013.
perform bdc_field       using 'RF05A-AGKOA'
                              AGKOA_014.
perform bdc_field       using 'RF05A-AGUMS'
                              AGUMS_015.
perform bdc_field       using 'RF05A-XNOPS'
                              XNOPS_016.
perform bdc_dynpro      using 'SAPDF05X' '3100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=PART'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF05A-ABPOS'.
perform bdc_field       using 'RF05A-ABPOS'
                              ABPOS_017.
perform bdc_dynpro      using 'SAPDF05X' '3100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=OMX'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF05A-ABPOS'.
perform bdc_field       using 'RF05A-ABPOS'
                              ABPOS_018.
perform bdc_dynpro      using 'SAPDF05X' '3100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=Z-'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF05A-ABPOS'.
perform bdc_field       using 'RF05A-ABPOS'
                              ABPOS_019.
* here !!
loop at doc_list into wa_doc_list.
perform bdc_dynpro      using 'SAPDF05X' '3100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=OSU'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF05A-ABPOS'.
perform bdc_field       using 'RF05A-ABPOS'
                              ABPOS_020.
perform bdc_dynpro      using 'SAPDF05X' '2000'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF05A-XPOS1(03)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=GO'.
perform bdc_field       using 'RF05A-XPOS1(01)'
                              XPOS1_01_021.
perform bdc_field       using 'RF05A-XPOS1(03)'
                              XPOS1_03_022.
perform bdc_dynpro      using 'SAPDF05X' '0731'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF05A-SEL01(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=GO'.
perform bdc_field       using 'RF05A-SEL01(01)'
*                              SEL01_01_023.
                               wa_doc_list-belnr.
perform bdc_dynpro      using 'SAPDF05X' '3100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=OMX'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF05A-ABPOS'.
perform bdc_field       using 'RF05A-ABPOS'
                              ABPOS_024.
perform bdc_dynpro      using 'SAPDF05X' '3100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=Z+'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF05A-ABPOS'.
perform bdc_field       using 'RF05A-ABPOS'
                              ABPOS_025.
perform bdc_dynpro      using 'SAPDF05X' '3100'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'DF05B-PSZAH(01)'.
perform bdc_field       using 'RF05A-ABPOS'
                              ABPOS_026.
perform bdc_field       using 'DF05B-PSZAH(01)'
*                              PSZAH_01_027.
                              wa_doc_list-WRBTR.
"here
perform bdc_dynpro      using 'SAPDF05X' '3100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=OSE'.
perform bdc_field       using 'BDC_CURSOR'
                              'DF05B-PSZAH(01)'.
perform bdc_field       using 'RF05A-ABPOS'
                              ABPOS_028.
endloop.
*perform bdc_dynpro      using 'SAPDF05X' '3100'.
*perform bdc_field       using 'BDC_OKCODE'
*                              '=OSU'.
*perform bdc_field       using 'BDC_CURSOR'
*                              'RF05A-ABPOS'.
*perform bdc_field       using 'RF05A-ABPOS'
*                              ABPOS_029.
*perform bdc_dynpro      using 'SAPDF05X' '2000'.
*perform bdc_field       using 'BDC_CURSOR'
*                              'RF05A-XPOS1(03)'.
*perform bdc_field       using 'BDC_OKCODE'
*                              '=GO'.
*perform bdc_field       using 'RF05A-XPOS1(01)'
*                              XPOS1_01_030.
*perform bdc_field       using 'RF05A-XPOS1(03)'
*                              XPOS1_03_031.
*perform bdc_dynpro      using 'SAPDF05X' '0731'.
*perform bdc_field       using 'BDC_CURSOR'
*                              'RF05A-SEL01(01)'.
*perform bdc_field       using 'BDC_OKCODE'
*                              '=GO'.
*perform bdc_field       using 'RF05A-SEL01(01)'
**                              SEL01_01_032.
*                              wa_doc_list-WRBTR.
*perform bdc_dynpro      using 'SAPDF05X' '3100'.
*perform bdc_field       using 'BDC_OKCODE'
*                              '=OMX'.
*perform bdc_field       using 'BDC_CURSOR'
*                              'RF05A-ABPOS'.
*perform bdc_field       using 'RF05A-ABPOS'
*                              ABPOS_033.
*perform bdc_dynpro      using 'SAPDF05X' '3100'.
*perform bdc_field       using 'BDC_OKCODE'
*                              '=Z+'.
*perform bdc_field       using 'BDC_CURSOR'
*                              'RF05A-ABPOS'.
*perform bdc_field       using 'RF05A-ABPOS'
*                              ABPOS_034.
*perform bdc_dynpro      using 'SAPDF05X' '3100'.
*perform bdc_field       using 'BDC_OKCODE'
*                              '/00'.
*perform bdc_field       using 'BDC_CURSOR'
*                              'DF05B-PSZAH(01)'.
*perform bdc_field       using 'RF05A-ABPOS'
*                              ABPOS_035.
*perform bdc_field       using 'DF05B-PSZAH(01)'
*                              PSZAH_01_036.
*"here
perform bdc_dynpro      using 'SAPDF05X' '3100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BU'.
perform bdc_field       using 'BDC_CURSOR'
                              'DF05B-PSZAH(01)'.
perform bdc_field       using 'RF05A-ABPOS'
                              ABPOS_037.
perform bdc_transaction tables messtab
using                         'FB05'
                              CTU
                              MODE
                              UPDATE.
if sy-subrc <> 0.
subrc = sy-subrc.
exit.
endif.
perform close_group using     CTU.
ENDFUNCTION.
INCLUDE BDCRECXY .

I agree with Sujay.......redo recording...
The reason of error maight be the GL Indicator.....
Check the combination of Posting Key & GL Indicator exits or not.......by posting directly thru txn FB05....
With the GL indicator & Posting key...might be the next screen no. changes.....just check...wild guess....
If so....Redo the recording for each combination of PK & GL Ind.
Thnx
RK

Why is my Mac Pro wireless keyboard not being found after changing batteries

Why does my Mac Pro not find the wireless keyboard after changing the batteries. I restarted the computer but it still doesn't recognize the keyboard?

Troubleshooting wireless mouse and keyboard issues
OS X: Bluetooth devices become unresponsive

MacBook Pro Retina Keyboard not responding after Sleep

Hi,
I am having an issue that I have noticed in Mountain Lion. When I put my MBPr to sleep, either via Apple->Sleep or by Closing the lid (maybe sleep for 5-10 min or more); the Keyboard will not respond at all and cannot enter the Password to get back in.
I have tried to remove the lock screen in order to avoid that but the same things happens for any App that I try to use and requires keyboard. The Apple Magic Mouse works fine, and I have no external keyboard connected.
I have taken it to the Store and the ML was re-installed...still same issue
Anyone had this happen and able to determine the cause?

Just some more info regarding this:
Pressing a key on the usb key board will bring up the log in screen and the mouse works (plugged into the keyboard) but text input from the keyboard doesn't work.

Reader not behaving as expected...

I'm trying to read from a java.io.Reader and I am not getting the -1 at the end of the input as expected. My code is below.
The while(true) loop, which is the outerloop, should be broken out of as soon as the -1 is read. The problem is that the -1 is never read and the loop ends up looping infinitely.
Any ideas?
Reader reader = parser.getReader();
String text = "";
outerloop:while (true)
    if ( ! reader.ready()) Thread.sleep(50);
    innerloop:while (rdr.ready())
        int c = rdr.read();
        if (c==-1) break outerloop;
        text += (char)c;
}

1) if the reader wasn't ready what assures that it
will be ready after 50 ms?Nothing does. However, if it is not ready, then the following loop will simply not execute and the main loop will start over and it will wait another 50 ms. The alternative of putting the Thread.sleep(50) line in a loop as follows...
while ( ! reader.ready()) Thread.sleep(50);...has gotten me in trouble in the past when the reader is finished and so is never ready, so I just end up sleeping over and over again. Of course my current implementation is also giving me an infinite loop since I'm never reading the -1, so I guess I haven't gained much.
2) to what is that reader connected? If the reader is connect to, say, the
standard input (keyboard), it won't return -1 unless you type ctrl-D (unix
flavour) or ctrl-Z (ms flavour). If the reader is connected to a socket, the
other side has to close the socket in order for your reader to detect an
EOF condition.The reader provided by an objecet in the Apache Jakarta Lucene package. It is an HTML Parser that takes an HTML document and is supposed to write out just the text after stripping all the tags. I am supposed to be able to read this text using the Reader.
It has occured to me that perhaps the object is not writing -1 when it is finished or is not closing the stream. In this case it would appear that whoever programmed that class did not do what he was supposed to. I'm skeptical of this line of reasoning, however, because the Apache Jakarta stuff is pretty reputable and I don't think this is just a mistake on their end.
The object that I get the reader from launches a new thread when I call the getReader() method. Somehow this thread has to signal that it is done with the processing and I have received all the input I am ever going to get. I just don't know what this signal is. The "-1" signal that the API tells me I should get never arrives.
Thanks for your help. Any more help would be appreciated.

CFLogin Not Behaving as Expected

Hello,
I'm creating a login system based on one in the live articles (found here: http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec22c24 -7c30.html#WSc3ff6d0ea77859461172e0811cbec0c8f9-7fdf ) Basically, am trying to modify the files so that the Application.cfc sets variables and returns them to the loginform (if login fails) or redirects to a secured page if login succeeds.
Here's my modified code: (I've added comments here in blue to explain my logic)
Application.cfc
<cfcomponent>
<cfset This.name = "LoginAdminTool">
<cfset This.Sessionmanagement="True">
<cfset This.loginstorage="session">
<cffunction name="OnRequestStart">
    <cfargument name = "request" required="true"/>
    <cfif IsDefined("Form.logout")>
        <cflogout>
    </cfif>
    <cflogin>
        <cfif NOT IsDefined("cflogin")>
            <cfinclude template="loginform.cfm">
            <cfabort>
        <cfelse>
            <cfset Session.loginErrEmptyString = "False"> This resets values of variables in the login form
            <cfset Session.loginErrInvalidString = "False"> This resets values of variables in the login form
            <cfif cflogin.name IS "" OR cflogin.password IS "">
                <cfoutput>
                    <cfset Session.loginErrEmptyString = "True"> If the string is empty, set the variable to true, return to login
                    <cflocation url="loginform.cfm">
                </cfoutput>
                <cfabort>
            <cfelse>
                <cfquery name="loginQuery" dataSource="myds"> If there is a value, validate it against my db...
                SELECT userName, userPass, userRole
                FROM security
                WHERE
                    userName = '#cflogin.name#'
                    AND userPass = '#cflogin.password#'
                </cfquery>
                <cfif loginQuery.userRole NEQ "">
                    <cfloginuser name="#cflogin.name#" Password = "#cflogin.password#" roles="#loginQuery.userRole#">
                    <cfset Session.userLoggedIn = "True"> if a result comes back, setuser logged in to true and redirect him to index.cfm
                    <cflocation url="index.cfm">
                <cfelse>
                    <cfoutput>
                        <cfset Session.loginErrInvalidString = "True"> Otherwise login is invalid... return to form
                        <cflocation url="loginform.cfm">
                    </cfoutput>
                    <cfabort>
                </cfif>
            </cfif>
        </cfif>
    </cflogin>
</cffunction>
</cfcomponent>
And here is the form:
                <cfoutput>
                <form action="#CGI.script_name#?#CGI.query_string#" method="Post">
                <fieldset>
                <ul class="logIn">
                    <li><label for="userName">Username</label></li>
                    <li><input type="text" name="j_username" id="userName"></li>
                    <li><label for="userPass">Password</label></li>
                    <li><input type="password" name="j_password" id="userPass"></li>
                    <li><input type="submit" value="Log In"></li>
                </ul>
                </fieldset>
                </form>
                </cfoutput>
            </div>
            <div class="box">
                <cfif Session.LoginErrEmptyString IS "True"> If the strings were empty error comes back, the page displays this error code
                    <cfoutput>
                    <h2>You must enter text in both the Username and Password fields.</h2>
                    </cfoutput>
                <cfelse>
                    <cfif Session.LoginErrInvalidString IS "True"> If login is invalid, it does that
                        <cfoutput>
                        <h2>The login information entered is invalid. Please Try again.</h2>
                        </cfoutput>
                    </cfif>
                </cfif>
                <cfdump var="#cgi#">
                <cfdump var="#session#">
The problem i am having is that, even when I am logging in correctly, the Application.cfc is not redirecting to index.cfm.... does anyone know the cause of this issue? Any help would be great appreciated... I'm sure there are many ways to code my logic better, but my intent was to avoid Application.cfc dumping html tags above the include="loginform.cfm" tag as per original script. I want to create my error messages within the form page itself..

Test by replacing <cfif loginQuery.userRole NEQ ""> with <cfif loginQuery.recordcount GT 0>

Question on Processing Pattern Sessions - not behaving as expected

I have implemented some schedulable jobs in my extensible cache configuration that are scheduled at a fixed rate and then use the processing pattern to submit work to the grid.
However I am seeing some unexpected behaviour which does not seem to make much sense. My jobs are submitted to the grid as follows (some code edited for brevity):-
@Override
     public void run() {
          ProcessingSession session = null;
          try {
          session = new DefaultProcessingSession(StringBasedIdentifier.newInstance("MySession"));
          SubmissionOutcome outcome = session.submit(this, new DefaultSubmissionConfiguration(),
     new TaskSubmissionCallback(taskName));
          catch (Throwable t) {
               log.error("Failed to Submit Process Pattern Task [{}] For Session [{}]", taskName, nodeName);
          finally {
               try {
                    session.shutdown();
               catch (Throwable t) {
                    log.error("[{}] Failed to Shutdown Processing Pattern Session [{}]", this, nodeName);
My tasks get scheduled and then submiited and executed in the grid. I am currently only running a single node through eclipse for testing.
But after the task has excecuted my TaskSubmissionCallback class gets invoked and the onDone() gets called and returns my result:-
public void onDone(Object oResult)
     log.debug("[{}] Submission done - Result = [{}]", m_sTaskName, oResult);
So all is working. However a couple of milliseconds later I see the following in the logs:-
2012-04-03 17:15:50.407/19.274 Oracle Coherence GE 3.6.0.4 <Error> (thread=DistributedCache:DistributedServiceForProcessingPatternSubmissionResults:EventDispatcher, member=1): The following exception was caught by the event dispatcher:
2012-04-03 17:15:50.407/19.274 Oracle Coherence GE 3.6.0.4 <Error> (thread=DistributedCache:DistributedServiceForProcessingPatternSubmissionResults:EventDispatcher, member=1):
java.util.concurrent.RejectedExecutionException
     at java.util.concurrent.ThreadPoolExecutor$AbortPolicy.rejectedExecution(ThreadPoolExecutor.java:1760)
     at java.util.concurrent.ThreadPoolExecutor.reject(ThreadPoolExecutor.java:767)
     at java.util.concurrent.ScheduledThreadPoolExecutor.delayedExecute(ScheduledThreadPoolExecutor.java:216)
     at java.util.concurrent.ScheduledThreadPoolExecutor.schedule(ScheduledThreadPoolExecutor.java:366)
     at java.util.concurrent.ScheduledThreadPoolExecutor.execute(ScheduledThreadPoolExecutor.java:438)
     at com.oracle.coherence.patterns.processing.internal.DefaultProcessingSession.removeCacheObjectsAsynch(DefaultProcessingSession.java:313)
     at com.oracle.coherence.patterns.processing.internal.DefaultProcessingSession.handleResultChange(DefaultProcessingSession.java:288)
     at com.oracle.coherence.patterns.processing.internal.DefaultProcessingSession$1.onMapEvent(DefaultProcessingSession.java:204)
     at com.tangosol.util.MultiplexingMapListener.entryUpdated(MultiplexingMapListener.java:42)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:270)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:226)
     at com.tangosol.util.MapListenerSupport.fireEvent(MapListenerSupport.java:557)
     at com.tangosol.coherence.component.util.SafeNamedCache.translateMapEvent(SafeNamedCache.CDB:7)
     at com.tangosol.coherence.component.util.SafeNamedCache.entryUpdated(SafeNamedCache.CDB:1)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:270)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ViewMap$ProxyListener.dispatch(PartitionedCache.CDB:22)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ViewMap$ProxyListener.entryUpdated(PartitionedCache.CDB:1)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:270)
     at com.tangosol.coherence.component.util.CacheEvent.run(CacheEvent.CDB:18)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.Service$EventDispatcher.onNotify(Service.CDB:26)
     at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
     at java.lang.Thread.run(Thread.java:619)
I have managed to solve this by removing the session.shutdown() call in the class that submits the job for processing using the Processing Pattern. However this seems odd to me
as the submitter should not need to hang around until the job completes (as that is surely the point of the Callback handler). I can of course code around this by having a Singleton
class which keeps the Processing session alive constantly and stores this in the Environment. But the question is why ???
This is running Coherence 3.6 and coherence-processingpattern-1.3.423238.
Would be grateful to know if this is a bug or my understanding is somehow confused !
TIA
Martin

I agree, believe me. However, one goes to war with the army one has, not the army one wishes one had, to quote somebody who, um... okay, failed miserably. Hmm...
It's a flat-rate project, so the troubleshooting isn't costing them any more, and their IT department wags the rest of the company and won't buy stuff. Eventually they'll have CS4 and these problems will go away, but probably not until next year.
If I were willing to give up the CS4-specific features (which I'm not; maximum efficiency in long documents is the core competency of my business), working in CS3 still wouldn't be an option because I don't own it. I'm also not likely to be able to talk the client into the idea that I'll take care of the last-minute tweaks instead of their having to do it all.
(Keep in mind, too, that there's more behind the scenes than I'm necessarily sharing in a quick forum post. If I can keep the typesetting from shifting in the .inx for now, I'm good.)
I filed that bug report--thanks!
UPDATE: Client says it looks right. Off we go...

Cache Management: Firefox does not behave as expected when setting cache preferences

I presently play a game online and override my cache management. I Set in the preferences the following parameters.
browser.cache.disk.max_entry_size = 2000:
browser.cache.disk.smart_size.enabled = false
However, when I check the properties of the cache folder it currently shows 2200.
Here is a subset of the problem I am experiencing. There are alot of files stored in cache_001, 002 and 003 which do not get stored on disk. I use mozillacacheview to view the cache. Is there a way to remove these files without deleting the entire cache.

no problem, i'm not sure if understand your follow-up question correctly. _cache_001_ 002, 003 contain a mix of index files, metadata and data of the cache itself, so it woudn't be safe to delete those whole files in windows when you want to keep the integrity of the cache intact. i don't know if mozillacacheview offers the option to selectively remove files from the cache, but i think this extension does: [https://addons.mozilla.org/firefox/addon/cacheviewer-continued/]

BufferedInputStream does not behave as expected in HP-UX

Hi !
I don't know if anybody experienced similar problem before.
I have this code:
try{
          BufferedInputStream     bis=new BufferedInputStream(ios,bufferSize*1024*1024);
          log.debug("The mark support val in retrieveFileRemote: "+bis.markSupported());
          //archive in source
          //mark as resetable
          bis.mark(0);
          archiveFile(filename,bis);
          bis.reset();
          if(!commandOK){
               //TODO: log some error here
               log.error("There is something wrong in the process of retrieving the file: "+filename+" in "+getHost());
               eAlert.setEmBody("There is something wrong in the process of retrieving the file: "+filename+" in"+getHost());
               eAlert.sendEmail();
               return bis;
          return bis;
          }catch(Exception e){
               log.error("something wrong in BufferedInputStream",e);
          }what it does is just initialize an InoutStream into BufferedInputStream to be able to be marked and reset for reuse. This is a part of my webapps and run under Tomcat 5.0.28. The code works well in Windows box, but when I deploy the exact same code in HP-UX it does not return the value to me. the 'bis' is just null and it doesn't return any error either.
The bufferSize was set to 50. So it is quite large. Would this be a problem in UNIX ? Do I need to chane the heap size setting ? I'm using default setting from Tomcat.
Thanks for any comment.

Need to see more of you program. Make sure you're not working against UNIX file permissions.

Items in session state not behaving as expected

And again...
(I hope I'm not asking too much, posting 2 new questions in under 5 min....)
This is something new I experienced: I need to show the value of an item (P210_EXTERNAL_ID) on a page (P215)
... not a big thing I thought... BUT when I tried to do this I hit the ground pretty rough (I thought I had actually gained some knowledge about html-db.)
My problem is that I pass on a lot of values from P200 (the report) to P215 (the form) and I reached the limit of characters, that can be used to specify the link (to P215).
So I thought to myself: Well, lets do it different!
I tried:
- specifying a default for the item on P215: P215_EXTERNAL_ID,
- specifying the source for P215_EXTERNAL_ID,
- creating a computation on P215_EXTERNAL_ID,
- filling P215_EXTERNAL_ID 'manually' with a process...
none of these did play the trick for me.
(By the way, I used both syntaxes to reference :P210_EXTERNAL_ID and &P210_EXTERNAL_ID.)
I used Display as Text (saves state) for the item on P215: P215_EXTERNAL_ID,
the item on P210: P210_EXTERNAL_ID is a Text Field.
The unexpected thing I experienced, was that the Item on P215 stayed empty or lagged behind:
- visit P210 with P210_EXTERNAL_ID = 1234
--- branch to P215 (P215_EXTERNAL_ID is empty)
- revisit P210 with P210_EXTERNAL_ID = 5
--- branch to P215 (P215_EXTERNAL_ID = 1234)
- revisit P210 with P210_EXTERNAL_ID = 66
--- branch to P215 (P215_EXTERNAL_ID = 5)
After realizing this I took a look at the session (with the link at the bottom of each page).
And in the Session State the value of P210_EXTERNAL_ID was the old value (always one behind)!!!
Has anybody ever seen something like this??
I'm really running out of ideas here.
-David-

Bill,
Usually I use the pass-on-only-the-PK method too, but here I built something like a consolidated view on a table: one row in the report doesn't correspond to one row in the table, but a group of rows, that are located in the same freezer, same shelf, same rack and same box. So the PK woun't work here b/c I don't have one in the first place... But the thing with referencing other pages items might do the trick to bring down the number of other values I pass on.
Another thought with the example:
- visit P210 with P210_EXTERNAL_ID = 1234
--- branch to P215 (P215_EXTERNAL_ID is empty)
- revisit P210 with P210_EXTERNAL_ID = 5
--- branch to P215 (P215_EXTERNAL_ID = 1234)
- revisit P210 with P210_EXTERNAL_ID = 66
--- branch to P215 (P215_EXTERNAL_ID = 5)
When I click on the edit button on P210 to go to P215, is the page P210 not submitted?
If that's the case, I understand why P210_EXTERNAL_ID in Session State has the last, but not the current value.... Since I branche off that page before submit, the items current values are not written to session state.
Anyone any thoughts to that???
-David-

Purge Cache by Table not behaving as expected

Hello Gurus,
We are using OBIEE 10.1.3.3.1.
We have requirement where we need to Purge the cache by Table.
So I am using ODBC function:
Call SAPurgeCacheByTable ('DBName','Catalog','Schema','Physical Table');
so when I run this from cmd prompt :
nqcmd -d AnalyticsWeb -u Username -p password -s C:\OracleBI\Server\Bin\clear_cache.txt
I got the result message as succeeded like below:
[59118] Operation SAPurgeCacheByTable succeeded!
row count 1
Processed Queries 1
But the thing is Local cache and web cache is not getting purged (.TBL files)
Please help to resolve this issue.
Thanks
Kanna

Hi,
the problem is that OBIEE 10.1.3.4.0 ha a bug, see the support document SAPurgeCacheByTable and SAPurgeCacheByDatabase not working [ID 787797.1].
The bug is logged as Bug 6906535 and it is fixed in the next release which is 11.1.
There is currently no fix for 10.1.3.4.
The support proposes to use SAPurgeAllCache() as a workaround.
I hope it helps.
Regards,
Gianluca Ancarani

Checkboxes not behaving as expected

All,
I am pulling my hair out here. I have a movieclip that contains some checkboxes "preferences_mc". I have an xml file that is loaded in and has an element called "isUnique" which has children with unique names like id, title, version and such. What I am trying to accomplish is for the form I am building to be able to select/deselect each checkbox and save the selection out to an xml file. I have gotten that far and everything is working perfectly. My problem is that after I load the xml back in and try to set the checkbox.selected = xmlPrefs.isUnique.id to get the checkbox to use the data from the xml file to decide whether it is selected or deselected, it ALWAYS selects the box whether it is true or false. I have tried everything. xmlPrefs.isUnique.id traces out as false which is correct but the screen still shows the checkbox selected. I even tried casting the xml as a Boolean and it still returns as a selected checkbox. I can select/deselect each checkbox and save the preferences out to an xml file correctly as well as read it back in correctly, it just will NOT set the checkboxes selection correctly. Anyone have a clue because apparently, I am lost. Oh, by the way, I also tried creating a new instance in actionscript and tried to assign the .selected property and then addChild and it STILL comes out selected even though it traces false.

Hi,
Try this:
var isUnique:Boolean = ( xmlPrefs.isUnique.id == "true" ) ? true : false;
checkbox.selected = isUnique;
Actually, when fetching values from xml, they come as string and hence just type-casting them will only return true as it just check for a value to be present.
Warm Regards
Deepanjan Das
http://deepanjandas.wordpress.com/

Trigger not behaving as expected

I have the following trigger on my table. I want to log in records which fail to insert into my main table RTS_EXCEL_UPLOAD into my audit table RTS_EXCEL_UPLOAD_BK. However, when I try to insert a bad record into my main table it throws an exception but does not log the record into RTS_EXCEL_UPLOAD_BK.
CREATE OR REPLACE TRIGGER TRG_RTS_EXCEL_UPLOAD_BF_I
BEFORE INSERT ON RTS_EXCEL_UPLOAD
FOR EACH ROW
DECLARE
PRAGMA AUTONOMOUS_TRANSACTION;
BEGIN
INSERT INTO RTS_EXCEL_UPLOAD_BK
(LG_NAME,LG_CODE,PRODUCT_CODE,RTS_PERCENTAGE,LAST_UPDATE_DATE,LAST_UPDATE_USER,COUNTRY_ID)
VALUES
(:new.LG_NAME,:new.LG_CODE,:new.PRODUCT_CODE,:new.RTS_PERCENTAGE,:new.LAST_UPDATE_DATE,:new.LAST_UPDATE_USER,:new.COUNTRY_ID)
DBMS_OUTPUT.PUT_LINE('TRIGGER FIRED');
COMMIT;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('TRIGGER NOT FIRED');
END;
CREATE TABLE RTS_EXCEL_UPLOAD_BK
(LG_NAME VARCHAR2(256)
,LG_CODE VARCHAR2(256)
,PRODUCT_CODE VARCHAR2(256)
,RTS_PERCENTAGE VARCHAR2(256)
,LAST_UPDATE_DATE VARCHAR2(256)
,LAST_UPDATE_USER VARCHAR2(256)
,COUNTRY_ID VARCHAR2(256));
CREATE TABLE RTS_EXCEL_UPLOAD
((LG_NAME VARCHAR2(256)
,LG_CODE NUMBER
,PRODUCT_CODE VARCHAR2(256)
,RTS_PERCENTAGE VARCHAR2(256)
,LAST_UPDATE_DATE VARCHAR2(256)
,LAST_UPDATE_USER VARCHAR2(256)
,COUNTRY_ID VARCHAR2(256));
INSERT INTO RTS_EXCEL_UPLOAD (LG_CODE)VALUES('A1');
this is not inserting record into my audit table RTS_EXCEL_UPLOAD_BK as expected.

Hi,
You can use FORALL SAVE EXCEPTIONS to audit in your backup table.
Let us see the example below :
create table test_tab
col1 number,
col2 varchar2(20),
constraint test_tab_ck check ( col1 in (1,2,3))
create table test_tab_bk
col1 number,
col2 varchar2(20)
SET serveroutput ON
DECLARE
     CURSOR cur_insert
     IS
     SELECT
          ROUND(dbms_random.value(1,4)) AS col1,
          '#######'                     AS col2
     FROM
          dual
     CONNECT BY level <= 10;
     TYPE rec_insert_tbl IS   TABLE OF cur_insert%ROWTYPE INDEX BY PLS_INTEGER;
     insert_tbl rec_insert_tbl;
     /* Exceptions */
     dml_errors EXCEPTION;
     PRAGMA EXCEPTION_INIT(dml_errors, -24381);
     /*Variables*/
     w_error_count NUMBER;
BEGIN
     OPEN cur_insert;
     FETCH cur_insert bulk collect INTO insert_tbl;
     BEGIN
     FORALL idx IN insert_tbl.FIRST .. insert_tbl.LAST SAVE EXCEPTIONS
     INSERT
     INTO
       test_tab
          col1,
          col2
       VALUES
          insert_tbl(idx).col1,
          insert_tbl(idx).col2
     EXCEPTION
          WHEN dml_errors THEN
          w_error_count := SQL%BULK_EXCEPTIONS.count;
          FOR i IN 1 .. w_error_count
          LOOP
            dbms_output.put_line ( 'Error: ' || i || ' Array Index: ' || SQL%BULK_EXCEPTIONS(i).error_index
            || ' Message: ' || SQLERRM(-SQL%BULK_EXCEPTIONS(i).ERROR_CODE) ) ;
              /* Again looping through the data which is to inserted */
               FOR idx IN insert_tbl.FIRST .. insert_tbl.LAST
               LOOP
                    /* If the index of the cursor is same as error index, insert in the Backup table */
                    IF idx = SQL%BULK_EXCEPTIONS(i).error_index THEN
                         INSERT
                         INTO
                           test_tab_bk
                              col1,
                              col2
                           VALUES
                              insert_tbl(idx).col1,
                              insert_tbl(idx).col2
                      END IF;
                 END LOOP;
          END LOOP;
     END;
     CLOSE cur_insert;
commit;
END;
select * from test_tab;
select * from test_tab_bk;This will work, but not sure if it can be implemented in your code.
This solution is also not great performance wise as for backup table we are inserting row by row.
LOG ERRORS INTO is still the best solution(both in usability and performance wise) and if possible try to use it.

Script Logic is not behaving as expected

I've written the script shown below and I can't figure out why I can use "GET" to retrieve temporary Revenue records that I'm creating but not the temporary Visit records. I need to retrieve 6 months of actual Revenue and Visits (a statistic), then multiply Budget Visits by actual revenue / actual visits. There are some differences in the datasrc, account, entity and category dimensions among the three types of recods, but I think I've accomodated them. I'm hoping that another set of eyes will see somthing obvious - any help would be greatly appreciated.
Thanks,
Tom
//$$ HERE'S THE CONTENTS OF A FILE THAT CONTAINS CONSTANTS
/////////// BEGIN ConstGrossRev.lgf ///////////////////////////////////////////////////////////////////////
// CONSTANTS FOR USE IN BUDGET GROSS REVENUE AND ALLOWANCES CALCULATIONS
// @@@@@@@ EDIT THE FOLLOWING LINES ONLY WHEN NEW BUDGET YEAR BEGINS @@@@@@@
// Budget Year
*FUNCTION varBUDYR=2009
// Current Year
*FUNCTION varCURYR=2008
// @@@@@@@@ EDIT THE ABOVE LINES ONLY WHEN NEW BUDGET YEAR BEGINS @@@@@@@@
// Current Year Months for Average Charge Calculation
// FIRST 6 MONTHS
*FUNCTION varCURMOS=varCURYR.JAN,varCURYR.FEB,varCURYR.MAR,varCURYR.APR,varCURYR.MAY,varCURYR.JUN
/////////// END ConstGrossRev.lgf ///////////////////////////////////////////////////////////////////////
//$$ THE CODE....
/////////// BEGIN CreateGrossRev.lgf ///////////////////////////////////////////////////////////////////////
// Budget Gross Revenue = Act 6 mos Gross / Act 6 mos Visits * Bud Visits
// ie. 2009 Bud Gross Rev = 2008 Act 6 Mos Gross / 2008 Act 6 mos Visits * 2009 Bud Visits
// Include the Constants File - This contains a user modifiable value that changes from year to year.
*INCLUDE ConstGrossRev.LGF
// SCOPE FOR ALL VISIT ACCOUNTS AND GROSS CHARGES, ACTUAL AND BUDGET
*MEMBERSET(%ACCTS%,"Descendants([ACCOUNTFIN].[OPTotalVisits],99,LEAVES)")
*MEMBERSET(%BUDMOS%,"Descendants([TIME].[varBUDYR.TOTAL],99,LEAVES)")
*XDIM_MEMBERSET ACTIONPLAN=<ALL>
*XDIM_MEMBERSET AFFILIATE=<ALL>
*XDIM_MEMBERSET CHARGECODE=<ALL>
*XDIM_MEMBERSET DATASRCFIN=<ALL>
*XDIM_MEMBERSET ENTITY=<ALL>
*XDIM_MEMBERSET PROJECT=<ALL>
*XDIM_MEMBERSET CATEGORY=ACTUAL,BUDGET
*XDIM_MEMBERSET TIME=%BUDMOS%,varCURMOS
*XDIM_MEMBERSET ACCOUNTFIN=%ACCTS%,A_41000,A_41100,A_41150,A_41170,A_41200,A_41300,A_41400,,A_41500,A_41600
*WHEN CATEGORY
*IS "ACTUAL"
    *WHEN TIME.YEAR
      *IS "varCURYR"
        *WHEN ACCOUNTFIN.GRREV_ACCT
          *IS <> ""
//$$ NEXT NON-COMMENT LINE RETURNS
//$$ ACCOUNTFIN,ACTIONPLAN,AFFILIATE,CATEGORY,PROJECT,CHARGECODE,DATASRCFIN,ENTITY,TIME,SIGNEDDATA
//$$ A_90700,BASE,NO_AFFILIATE,#TEMP_VIS,NO_PROJECT,ALL_cHARGECODES,PEOPLESOFT,FORES,2009.INP,567.89 (AND ANOTHER 50 VALID RECORDS)
            *REC(TIME="varBUDYR.INP",ENTITY=ENTITY.BU,CATEGORY="#temp_VIS")
        *ELSE
//$$ NEXT NON-COMMENT LINE RETURNS
//$$ ACCOUNTFIN,ACTIONPLAN,AFFILIATE,CATEGORY,PROJECT,CHARGECODE,DATASRCFIN,ENTITY,TIME,SIGNEDDATA
//$$ A_90700,BASE,NO_AFFILIATE,#TEMP_REV,NO_PROJECT,NO_cHARGECODE,PEOPLESOFT,FORES,2009.INP,234567.89 (AND ANOTHER 15 VALID RECORDS)
            *REC(ACCOUNTFIN=ACCOUNTFIN.VIS_ACCT,TIME="varBUDYR.INP",ENTITY=ENTITY.BU,CATEGORY="#temp_REV")
        *ENDWHEN
    *ENDWHEN
*ENDWHEN
*GO
*WHEN CATEGORY
*IS "BUDGET"
    *WHEN TIME.YEAR
      *IS "varBUDYR"
        *WHEN ACCOUNTFIN.GRREV_ACCT
          *IS <> ""
//$$ NEXT NON-COMMENT LINE RETURNS
//$$ ACCOUNTFIN,ACTIONPLAN,AFFILIATE,CATEGORY,PROJECT,CHARGECODE,DATASRCFIN,ENTITY,TIME,SIGNEDDATA
//$$ A_90700,BASE,NO_AFFILIATE,BUDGET,NO_PROJECT,NO_cHARGECODE,PEOPLESOFT,FORES,2009.INP,234567.89 (AND ANOTHER 200 VALID RECORDS)
//$$ THIS RETURNS THE CORRECT RECORDS FROM BEFORE THE "GO"
             *REC(EXPRESSION=GET(TIME="varBUDYR.INP",CATEGORY="#temp_REV",ENTITY=ENTITY.BU,DATASRCFIN="PEOPLESOFT",CHARGECODE="NO_CHARGECODE"))
//$$ NEXT NON-COMMENT LINE RETURNS
//$$ ACCOUNTFIN,ACTIONPLAN,AFFILIATE,CATEGORY,PROJECT,CHARGECODE,DATASRCFIN,ENTITY,TIME,SIGNEDDATA
//$$ A_90700,BASE,NO_AFFILIATE,BUDGET,NO_PROJECT,ALL_cHARGECODES,PEOPLESOFT,FORES,2009.INP,0 (AND ANOTHER 50 VALID RECORDS)
//$$ THIS RETURNS RECORDS WITH A VALUE OF ZERO IN ALL CASES!
             *REC(EXPRESSION=GET(TIME="varBUDYR.INP",CATEGORY="#temp_vis",ENTITY=ENTITY.BU,DATASRCFIN="PEOPLESOFT"))
        *ENDWHEN
    *ENDWHEN
*ENDWHEN
*COMMIT
/////////// END ConstGrossRev.lgf ///////////////////////////////////////////////////////////////////////

Hi Tom
I don't see where you define or set value for #TEMP_REV and #TEMP_VIS
something like
*WHEN CATEGORY.FLAG
*IS = Y
*REC(CATEGORY=#TEMP_VIS)
*ELSE
*REC(CATEGORY=#TEMP_REV)
*ENDWHEN
*GO

Venue 11 Pro - Slim Keyboard not behaving as expected or it should.

Similar Messages

Maybe you are looking for