Verbatim 2gig thumb drive is not secure on the mac , is there a workaround?

The drive , usb , does not have access on a Mac to its built in security code. Is there any workaround for this problem?
Len ,( IT for Lizdoc.)
Thanks

tyler57,
it would be better to direct that question to Gary Loftis, since my MacBook Pro doesn’t have a Thunderbolt port.

Similar Messages

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

Yes, junker thumb drives pour like rain in the market.
Which makes are working on your Air, and which arent?
Stick to Sandisk and a couple of other reliable mfg. of memory sticks

OS X lion USB Thumb Drive - will this work on new Mac Mini or MBA (2011)?

Hi All,
Not to be confused with the other similar posts, I am interesting in only clarification of what build comes with the USB Thumb Drive now available on Apple Store - will this work with new MBA and Mac Mini?
Thanks,

KeanuReeves wrote:
From what I have read about the usb installer, it is not intended for you to try booting from the stick after wiping your hard drive. You are to click on the installer
You may be correct, but this statement is quite confusing in that context:
Important Note
When you install OS X Lion using the USB thumb drive, you will not be able to reinstall OS X Lion from Lion Recovery. You will need to use the USB thumb drive to reinstall OS X Lion.
So, if the Thumb drive is supposed to take the part of the Recovery partition, it seems that it should be able to boot. However, the license agreement still requires an Apple computer running Snow Leopard, so maybe it isn't bootable.

External Drive Files Not Showing Up on Mac but files do shows Up on PC

External Drive Files Not Showing Up on Mac but files do shows Up on PC
i had the Ex HD for about 3 years running smoothly on my mac but recently everything disappeared. plunged it into a pc to see if it read my files and it did. what can i do? to make it work on mac again. i don't want to reformat that drive because i have important applications (DMG) and other zip photo video files in the drive.

yes. i did.
...i have tried "verify" & "repair" but they didn't pass the san test. and when i "unmounted/mount" a error message popped up say that there is a application running off the drive but there nothing (i see) running, to close all activity

My external hard drive is not recognised on my mac book pro

my external hard drive is not recognised on my mac book pro

Hello all -
similar situation. Unplugged external hard drive and all to take the laptop on a trip. On return, I plugged everything back in and keep getting this message:
Time Machine couldn’t complete the backup to “Iomega_Ext_Drive”.
Files can’t be copied onto the backup disk because it appears to be read-only.
You may need to repair or reformat the disk using Disk Utility. If the disk can’t be repaired, you must use a different disk for backups. Open Time Machine preferences to select a different backup disk.
open time machine preferences. -
I tried this and tried "repair" but that didn't work and I still get this message. Any advice? thanks

What should i do if my external hard drive is not detected by my mac

what should i do if my external hard drive is not detected by my mac?
need to have the files saved on it and be able to backup via time machine

Hi:
Here are some of the options I've read about on here that may or may not work:
1. Reset the NVRAM as it may need to be reset to recognize the drive. See below:
http://support.apple.com/kb/ht1379
2. If the drive is a USB drive, put a USB hub between the drive and the unit. As ridiculous as that may sound in some cases it works.
3. If you have some types of hardware problems and want to test them this works:
http://scsc-online.com/Scannerz.html
That's a test tool only. It isn't going to fix anything just diagnose a bunch of possible hardware problems and it costs money, too.
What format is the drive in? Is it a Mac native format like HFS or is it some other format, like NTFS or FAT?

When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows

When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows

Go through this support doc:
OS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

Driver does not appear in the selection tab Windows8

NDIS protocol driver does not appear in the Selection Tab and hence I can not run any tests on it. The client operating system is Windows 8 64bit Pro Premium. I tried reinstall driver several times, reboot client and studio machines, but with no results.
Client itself is connected to the studio and is in "Ready" state.
There was no problem running the test on the same driver with Win7 64bit client OS.
HCK version is 8.59.29854
The driver is build with DDK7.1.0
Any hints on how to debug this would be helpful.
Dmitry

Have you uninstalled and re-install the HCK client on the test system? This can cause the entry on the controller to not match up with the actual client system. If this is the case, and you have done no testing on the system (as all results will
be lost), please try this:
1) Uninstall the DTM client from the test system.
2) Delete the client entry from HCK studio in the machine management section.
3) Reinstall the DTM client on the test system.
4) Wait for client entry appear in the "Default Pool"
5) Change client status to "Reset", wait for it to become "Ready", and try locating the target as I describe above.
Paul - This posting is provided "AS IS" with no warranties, and confers no rights.

My flash drive will not connect to my Mac. what should I do?

My flash drive will not connect to my Mac. What should I do, and how should I fix this?

I could not save the data in time, so i just had to deleat every thing on the flash drive.

Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

Are they daisy chained? Have you tried them one at a time? Have you tried a different FireWire cable? Do they show up in either system profiler or Disk Utility? Have you reset the SMC? http://support.apple.com/kb/HT3964

My mac air will not connect to the internet. There is an exclamation point in the wifi icon and when i go into preferences i see that it is setting its own IP address. I have a macbook that is able to connect with no issue. HELP

My macbook air will not connect to the internet. There is an exclamation point in the wifi icon and when i go into preferences i see that it is setting its own IP address. I have a macbookpro that is able to connect with no issue. HELP

Reset the TC to factory and start again.
Use all SMB type names for wireless and base station.. Not apple type names.. this is more important since Mavericks.
I also recommend different names for the different bands.
So for example.
TC name.. TCgenx (I use whatever the generation number is for the x.. eg TCgen4 or latest one TCgen5)
WIreless name.. TC24ghz for 2.4ghz
TC5ghz for 5ghz
You can also set the channel manually.
If you still have issues.. start with no security and then if it fails to connect there is something seriously wrong with the laptop. Did you upgrade install Mavericks?? That can lead to driver issues.. I would recommend a clean install.

Problem of SATA burner blu-ray drive vs IDE ribbon in the mac. Would all I need is a SATA to IDE/IDE adaptor?

I purchased an MCE blu-ray burner a while back in 2010 and am only now installing it, and am running into the problem of SATA drive vs IDE ribbon in the mac.
Would all I need is a SATA to IDE/IDE adaptor? Are there any details I need to know?

that one will definetly not work, notice how theres no place for you to hook your power connector in there? going IDE to SATA is something I am yet to find an adaptor that really works well yet( that being said i only tried once.) that being said, you can definetly use somethign like the thing i link to below assuming you have a free HDD bay. you can use it to bring one of your HDD sata ports AND power, up to your optical drive bay. That way, theres no convertion, only a quick little extention. They come in varying lengths from 3", (prob too short), to 8" (the one i linked to, might just barely be long enough, maybe still too short) to 20", more than long enough.
Good luck
http://www.ebay.com/itm/22-Pin-Male-22-Pin-Female-SATA-Extender-Cable-8-Inch-/27 0651981600?pt=LH_DefaultDomain_0&hash=item3f041d7f20#ht_500wt_1039

I get the message "Install Adobe Flash" can't be opened because it was not downloaded from the Mac App Store. This is the first time I have gotten the message. What do I need to do?

I get the message "Install Adobe Flash" can't be opened because it was not downloaded from the Mac App Store. This is the first time I have gotten the message. What do I need to do?

Hi Sandra,
you'll need to edit the security settings to install programs 'Mac App Store and identified developers'
Open the Systems Preference and go to Security & Privacy. There will be a section in the 'General' tab for 'Allow apps downloaded from:" The default selection is 'Mac App Store'. Change this setting to 'Mac App Store and identified developers".
This screenshot is taken on OS X 10.10 (Yosemite), so it may look slightly different if you're on a different OS X version.
Maria

This message appears whenever I try to open a file downloaded from internet: can't be opened because it was not downloaded from the Mac App Store

Just bought a new Imac OX 10.9. Installed contents from previous Time Machine. All looks good. But, now, when I try to open any file downloaded from interent (like the Amazon mp3 downloader, for example or a plugin update) I get this message:
"XXX can’t be opened because it was not downloaded from the Mac App Store" . Help! Thanks

Got it solved! System preferences, security & privacy icon, general: allow apps downloaded from Mac Store and Identified developers! Phew!

HT204187 Email account does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

I have seral email accounts on my Mac. One does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

You don't input the information in manually for iCloud mail. It is automatically set up for you when you sign into iCloud via System Preferences and choose the Mail checkbox. Sign out of iCloud or deselect Mail in iCloud preferences. Open Mail's preferences and choose accounts tab. If iCloud account still exists in the list, delete it. Sign back into iCloud or check the box for mail. The account will be auto created for you.

Verbatim 2gig thumb drive is not secure on the mac , is there a workaround?

Similar Messages

Maybe you are looking for