Verbose Mode Always On

I just got my 15 inch Powerbook G4 1.67 GHz (running OS X 10.4.6, Tiger) back from the factory. They had to repair the lower memory slot because it was failing to recognize the memory in the lower slot (hence the name, haha). My computer seems to continually be booting up in "Verbose Mode." (I found that out after much research on what I might call this issue.)
So... HOW DO I TURN VERBOSE MODE OFF ON MY POWERBOOK G4??? Please help me. I have searched, but I just could not find out how to turn it off. Thank you!

I figured out how to turn off Verbose Mode. Be careful when doing it! The link to the website is...
http://www.oreillynet.com/pub/h/348
Here's what I did to turn it OFF:
1. Opened program "Terminal" (Applications > Utilities > Terminal)
2. Copied and pasted in the command given in the website to turn Verbose Mode ON (yes, ON). Pressed Return key.
3. Typed the admin. access password (as defined by you, the administrator). Pressed Return key.
4. Copied and pasted in the command given in the website to turn Verbose Mode OFF. Pressed Return key.
5. Closed Terminal
6. Restarted my computer.
* Verbose Mode OFF!
Note: During the Restart process the Verbose Mode still showed up, but upon starting up, it was OFF, back to showing the little spinning gear under the Apple (gray/grey screen).
Hope this helps others!

Similar Messages

  • Always Booting In Verbose Mode

    Recently I did some work on my two MacBooks. Simply enough, I removed the hard drive from each MB and switched it with the other so that each machine now had the other's hard drive (reasons are unnecessary). It worked perfectly, or so I thought. The only bug that has come up repeatedly is that my MBP, which has the HD from the older BlackBook, is always starting up in verbose mode.
    What would cause this? I never altered the "sudo nvram boot-args= " command in terminal, though I guess it could be possible for something else to have altered it when the hard drives were switched.

    Hi there,
    Now we are getting some fun, don't we? that's really odd.
    The blank screen before the verbose mode is normal, usually after the blank we get the apple splash screen.
    I also found a bug at my startup as I was making some tests trying to find your ways out of this bug.
    In fact I found some log features that I should not have in my system since it was set before I format and zero out my hard disc two times in the last two weeks.
    I could not proceed with my testings by now but I will. Also I found something yesterday that you could read about if you have any interest about the boot process at http://osxbook.com/book/bonus/ancient/whatismacosx/arch_startup.html
    Good luck, hope I come back soon with some light.

  • How to permanently boot up in verbose mode?

    Hi,
    I want to always boot up OS X Mavericks (10.9.2) in verbose mode (debug mode) as I pressed Cmd+V everytime.
    I remember an old command which I used on Snow Leopard for doing this:
    « sudo nvram boot-args="-v" »
    but I don't know if it's still valid on Mavericks!!
    The command « nvram -p » works and doesn't show any "-v" verbalization in the "boot-args" section, so I'm currently thinking my command is still valid (it does still show other commands, though).
    But I need your help, Apple experts! Can you confirm this?
    Thanks in advance,
    Tyrexionibus
    Message was edited by: Tyrexionibus

    Restart the computer. At the chime press and hold down the SHIFT key until you see the spinning gear below the Apple Logo. You should also see a progress bar appear. Booting into Safe Mode takes much longer than a normal startup.

  • How to start up MAC mini only in the verbose mode (command line) , no GUI

    Can anyone let me know how I can set up the mac mini to ALWAYS boot into a verbose mode only, no GUI interfaces at all?
    Mac Mini   Mac OS X (10.4.6)  
    Mac Mini   Mac OS X (10.4.6)  

    Hi, Andy your replies are really helpful. I did tried your method and also followed the link http://www.oreillynet.com/pub/h/348
    Now my mac mini - Tiger seems hanging forever at the boot up screen. A Apple log showed up with a message "Starting Mac OS X ..." and now almost 5 minutes passed, nothing happened ...

  • Verbose mode ****

    So it all started a while ago when sleep mode only lasted for 10 seconds after I upgraded to 10.4.9. I read that this was a common problem, so I just shut down at night. About a week ago, the computer kept booting from the gray Apple boot screen straight to the Blue Screen of Death: "You need to restart your computer". Kernel panic. Yay. Always a code 14: page fault.
    So I swapped the ram but nothing changed, and I could boot into OSX fine occasionally. No Disc Utility noticed anything wrong. Then yesterday my MBP quit recognizing my external hard drive. I can use the hard drive with Windows machines and my iMac G4 just fine. I've tried to boot in safe mode, but while holding down shift, the gray screen just stays there spinning forever. I can't boot into open-firmware either.
    When I put the install disc in and held down C, I got a kernel panic message that said Unable to find driver for this platform : “ACPI”, and now my computer is in verbose mode telling me all kinds of awful things about the mDNSResponder, and " I have no name!#"
    I'm fine with backing up my data and reformatting if that's what it takes - but since the MBP won't recongize the hard drive I can't do that. I want to take it to the genius bar tomorrow and see if they can figure out what in the world is going on.
    Here's some stuff verbose mode is putting out right now:
    mDNSResponder: GetDNSConfig: Error: dnsconfigurationcopy returned NULL
    configd[257]: No AirPort Driver found.
    configd[257]: LINKLOCAL: inet6attachinterface(en0) failed, File exists (17)

    Furthermore, the PRAM reset command won't even load the gray Apple before it restarts (maybe that's normal). I managed to get into Hardware Test mode by holding D.

  • Verbose mode after putting old harddisk in new laptop

    Hi,
    i just got myself a brand new macbook with the nvidia chipsets to replace my defective old one. When i received the new one, i swapped the harddisks in order to work with my old setup and basically everything went fine, but somehow Mac OS is now always in verbose mode for boot-up and shutdown. I tried resetting PRAM twice and also emptied the boot-args nvram parameter. The computer still comes up in verbose mode only though. Any ideas?

    warrick wrote:
    Well, as a matter of fact it does work as i stated already and i wouldn't know why it shouldn't - my leopard is up-to-date. It is just the verbose mode that i don't know how to disable.
    Very often the OS is installed with components for the particular "build" of the hardware. I've heard of Apple swapping machines this way, but many times it works oddly. It may work to some degree, but then there can be strange things that happen. I'm guessing it's finding something unusual because OS is expecting different hardware, and is taking time to resolve the issues when booting.
    The original install disks often only have the drivers for the particular model. It may "be Leopard" but there may be missing components that are needed for ideal functioning with your new machine.
    Probably the ideal solution (if they've taken the drive that came with the new machine) would be to get a new hard drive and enclosure for your old drive. You could format the new drive and install OSX from the install discs that come with your new machine. Then you could copy over files and settings from your old drive (in an enclosure) using Migration Assistant.

  • Normal Startup Messages (System.log; Intel Verbose Mode)?

    Over this past weekend, I wanted to test the backup I had for my 24" iMac. I had always used Apple's Backup program that comes with .Mac when I had my PowerBook, and never tested it. This was bad, because it didn't work when I actually needed it.
    I also suspected there might be something slightly wrong with my iMac, so equipped with about 4 hours and my install DVDs i went to work.
    The only thing I've done so far is get all the Apple updates and setup my iChat account. I changed to boot in verbose mode, and found that the eery messages that scared me prior to doing my reinstallation of OS X (I zeroed the drive, then did a full install) were still there.
    Here is my entire System.log:
    Jan 30 09:22:35 mike-barcas-computer sudo: Mike : TTY=ttyp1 ; PWD=/Users/Mike ; USER=root ; COMMAND=/usr/sbin/nvram boot-args=-v
    Jan 30 09:22:48 mike-barcas-computer shutdown: reboot by Mike:
    Jan 30 09:22:48 mike-barcas-computer SystemStarter[279]: authentication service (287) did not complete successfully
    Jan 30 09:22:48 mike-barcas-computer kernel[0]: (295: ps)tfp: failed on 0:
    Jan 30 09:22:48 mike-barcas-computer kernel[0]: (295: ps)tfp: failed on 0:
    Jan 30 09:22:48 mike-barcas-computer kernel[0]: (295: ps)tfp: failed on 0:
    Jan 30 09:22:49 mike-barcas-computer kernel[0]: (322: ps)tfp: failed on 0:
    Jan 30 09:22:49 mike-barcas-computer SystemStarter[279]: The following StartupItems failed to properly start:
    Jan 30 09:22:49 mike-barcas-computer kernel[0]: (322: ps)tfp: failed on 0:
    Jan 30 09:22:49 mike-barcas-computer SystemStarter[279]: /System/Library/StartupItems/AuthServer
    Jan 30 09:22:49 mike-barcas-computer kernel[0]: (323: ps)tfp: failed on 0:
    Jan 30 09:22:49 mike-barcas-computer SystemStarter[279]: - execution of Startup script failed
    Jan 30 09:23:08 localhost kernel[0]: hi mem tramps at 0xffe00000
    Jan 30 09:23:08 localhost kernel[0]: PAE enabled
    Jan 30 09:23:08 localhost kernel[0]: 64 bit mode enabled
    Jan 30 09:23:08 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Jan 30 09:23:08 localhost kernel[0]: vmpagebootstrap: 512343 free pages
    Jan 30 09:23:08 localhost kernel[0]: migtable_maxdispl = 71
    Jan 30 09:23:08 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
    Jan 30 09:23:08 localhost kernel[0]: 80 prelinked modules
    Jan 30 09:23:08 localhost kernel[0]: ACPI CA 20060421
    Jan 30 09:23:08 localhost kernel[0]: AppleIntelCPUPowerManagement: ready
    Jan 30 09:23:08 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
    Jan 30 09:23:08 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
    Jan 30 09:23:08 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Jan 30 09:23:08 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Jan 30 09:23:08 localhost kernel[0]: using 10485 buffer headers and 4096 cluster IO buffer headers
    Jan 30 09:23:08 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
    Jan 30 09:23:08 localhost kernel[0]: Started CPU 01
    Jan 30 09:23:08 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    Jan 30 09:23:08 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    Jan 30 09:23:08 localhost kernel[0]: Security auditing service present
    Jan 30 09:23:08 localhost kernel[0]: BSM auditing present
    Jan 30 09:23:08 localhost kernel[0]: disabled
    Jan 30 09:23:08 localhost kernel[0]: rooting via boot-uuid from /chosen: 771A8047-7B26-48DC-ABB6-89E46168EE40
    Jan 30 09:23:08 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Jan 30 09:23:08 localhost kernel[0]: USB caused wake event (EHCI)
    Jan 30 09:23:08 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 0017f2fffe6db760; max speed s800.
    Jan 30 09:23:08 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT2 @2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/ST3500641AS Q Media/IOGUIDPartitionScheme/AppleHFS_Untitled2@2
    Jan 30 09:23:08 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
    Jan 30 09:23:08 localhost kernel[0]: CSRHIDTransitionDriver::probe: -v
    Jan 30 09:23:08 localhost kernel[0]: CSRHIDTransitionDriver::start before command
    Jan 30 09:23:08 localhost kernel[0]: CSRHIDTransitionDriver::stop
    Jan 30 09:23:08 localhost kernel[0]: IOBluetoothHCIController::start Idle Timer Stopped
    Jan 30 09:23:08 localhost kernel[0]: Jettisoning kernel linker.
    Jan 30 09:23:08 localhost kernel[0]: Resetting IOCatalogue.
    Jan 30 09:23:08 localhost kernel[0]: GFX0: family specific matching fails
    Jan 30 09:23:08 localhost kernel[0]: Matching service count = 1
    Jan 30 09:23:08 localhost kernel[0]: Matching service count = 2
    Jan 30 09:23:08 localhost kernel[0]: Matching service count = 2
    Jan 30 09:23:08 localhost kernel[0]: Matching service count = 2
    Jan 30 09:23:08 localhost kernel[0]: Matching service count = 2
    Jan 30 09:23:08 localhost kernel[0]: Matching service count = 2
    Jan 30 09:23:08 localhost kernel[0]: NVDANV40HAL loaded and registered.
    Jan 30 09:23:08 localhost kernel[0]: GFX0: family specific matching fails
    Jan 30 09:23:08 localhost kernel[0]: wl0: Broadcom BCM4328 802.11 Wireless Controller
    Jan 30 09:23:08 localhost kernel[0]: 4.80.76.0Previous Shutdown Cause: 3
    Jan 30 09:23:08 localhost memberd[38]: memberd starting up
    Jan 30 09:23:08 localhost mDNSResponder-108.2 (Aug 25 2006 14: 50:48)[31]: starting
    Jan 30 09:23:10 localhost lookupd[44]: lookupd (version 369.6) starting - Tue Jan 30 09:23:10 2007
    Jan 30 09:23:13 localhost diskarbitrationd[37]: disk0s2 hfs 8AAF2196-1366-34AB-B7BC-3D96F131E9AD Macintosh HD /
    Jan 30 09:23:13 localhost DirectoryService[43]: Launched version 2.1 (v353.5)
    Jan 30 09:23:13 localhost kernel[0]: yukonosx: Ethernet address 00:16:cb:9e:39:58
    Jan 30 09:23:13 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:17:f2:99:63:9d
    Jan 30 09:23:13 localhost lookupd[56]: lookupd (version 369.6) starting - Tue Jan 30 09:23:13 2007
    Jan 30 09:23:14 mike-barcas-computer configd[35]: setting hostname to "mike-barcas-computer.local"
    Jan 30 09:23:14 mike-barcas-computer kernel[0]: Registering For 802.11 Events
    Jan 30 09:23:14 mike-barcas-computer /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
    Jan 30 09:23:14 mike-barcas-computer kernel[0]: [HCIController][setupHardware] AFH Is Supported
    Jan 30 09:23:16 mike-barcas-computer mDNSResponder: Adding browse domain local.
    Jan 30 09:23:16 mike-barcas-computer loginwindow[50]: Login Window Started Security Agent
    Jan 30 09:23:17 mike-barcas-computer kernel[0]: SetCryptoKey T: len 16, idx 0
    Jan 30 09:23:17 mike-barcas-computer kernel[0]: SetCryptoKey R: len 16, idx 1
    Jan 30 09:23:17 mike-barcas-computer /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Currently connected to network Ferrari
    Jan 30 09:23:20 mike-barcas-computer configd[35]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
    Jan 30 09:23:20 mike-barcas-computer configd[35]: posting notification com.apple.system.config.network_change
    Jan 30 09:23:20 mike-barcas-computer lookupd[88]: lookupd (version 369.6) starting - Tue Jan 30 09:23:20 2007
    Jan 30 09:23:20 mike-barcas-computer ntpdate[126]: no servers can be used, exiting
    Jan 30 09:23:21 mike-barcas-computer configd[35]: target=enable-network: disabled
    The lines that concern me are the ones bolded at the top of System.log
    The other thing that is a bit unnerving to me is that when I have it set to boot in verbose mode, and then restart the computer, I get a screen that looks out of place. It is a box with a dark background in the center of the screen with text in there, and then it quickly switches to full screen verbose mode. The first line of full screen verbose mode (which is what I'm used to since I always used verbose mode on my PowerBook) is this one:
    Jan 30 09:23:08 localhost kernel[0]: hi mem tramps at 0xffe00000
    In the centered text, it mentions something about "loading drivers" followed by many lines of periods. It is only up for about 5 seconds, and then switches to full screen verbose mode. Is that centered window for verbose mode new to intel Macs? I never recall seeing it on my PowerBook.
    When i googled around for the "hi mem tramps" message, i found it might be linked to bad ram. I used memtest and did 3 passes to check the ram, and it found no errors.
    Are these messages in System.log normal?
    Thanks!

    Hi, Mike.
    First, please don't use the "scatter gun" or "post everywhere" approach. I see you've also post the same question here. I appreciate your urgent desire for help, but it would be very annoying to anyone answering questions here to spend time researching your question in one post, only to find it already answered in another place where it was also posted. The "scatter gun" approach is a good way to get all your future posts ignored.
    According to what I read in the second post of this topic on another forum, I suspect you may have a Startup Item that's causing the highlighted messages to be written to system.log. Perhaps some PowerPC code you may have migrated over to your Intel-based Mac if you used the Setup / Migration Assistant to move to the new Mac from a pervious Mac.
    There have been numerous posts about the tfp: failed on 0 message, which can be seen in this search of the Discussions. However, I suspect the explanation I've cited above fits your situation.
    If an errant Startup Item is the cause, my "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem.
    As to hi mem tramps…, that may be normal. If you read this item and click on the link for dmesg you'll see a typical output someone else posted as, I suspect, an example of "normal."
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • SSRS error - verbose mode

    We have a SCCM and use SQL 2012 server for reporting. Recently we have started experiencing a problem where we can browse to the reports and once we do run the reports, it tries to run forever and eventually halts with the following error
    An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. (rsReportServerDatabaseError) 
    I have enabled verbose mode on the sql server and restarted the reporting service. Below is the log file where I am hoping someone will be able to tell me what the issue is:
    <Header>
      <Product>Microsoft SQL Server Reporting Services Version 2011.0110.5058.00 ((SQL11_PCU_Main).140514-1820 )</Product>
      <Locale>English (United Kingdom)</Locale>
      <TimeZone>GMT Standard Time</TimeZone>
      <Path>E:\Program Files\Microsoft SQL Server\MSRS11.INSTANCE2\Reporting Services\Logfiles\ReportServerService__12_18_2014_14_54_36.log</Path>
      <SystemName>SRVPRDAPPDB1</SystemName>
      <OSName>Microsoft Windows NT 6.2.9200</OSName>
      <OSVersion>6.2.9200</OSVersion>
      <ProcessID>27476</ProcessID>
      <Virtualization>None</Virtualization>
    </Header>
    <ProcessorArchitecture>AMD64</ProcessorArchitecture>
    <ApplicationArchitecture>AMD64</ApplicationArchitecture>
    rshost!rshost!4d58!12/18/2014-14:54:36:: i INFO: CLR runtime is initialized.
    rshost!rshost!4d58!12/18/2014-14:54:36:: v VERBOSE: Initializing Memory Monitoring
    rshost!rshost!4d58!12/18/2014-14:54:36:: i INFO: Derived memory configuration based on physical memory as 268369396 KB
    rshost!rshost!4d58!12/18/2014-14:54:36:: v VERBOSE: Supported winsock version is 2.2.
    appdomainmanager!DefaultDomain!4d58!12/18/2014-14:54:36:: i INFO: Entered managed ServiceMain in DefaultDomain.
    configmanager!DefaultDomain!6728!12/18/2014-14:54:37:: e ERROR: Configuration file element UrlReservation has a invalid VirtualRoot. It will be ignored.
    configmanager!DefaultDomain!6728!12/18/2014-14:54:37:: e ERROR: Configuration file element UrlReservation has a invalid VirtualRoot. It will be ignored.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing ConnectionType to '0'  as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing SecureConnectionLevel to '0'  as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing DisableSecureFormsAuthenticationCookie to 'False'  as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing DisplayErrorLink to 'True'  as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing WebServiceUseFileShareStorage to 'False'  as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing WatsonFlags to '1064'  as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException'
     as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException,Microsoft.ReportingServices.WmiProvider.WMIProviderException'
     as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing AuthenticationTypes to '4'  as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing RSWindowsExtendedProtectionLevel to 'Off'  as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing RSWindowsExtendedProtectionScenario to 'Proxy'  as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing EnableAuthPersistence to 'True'  as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing IsSchedulingService to 'True'  as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing IsNotificationService to 'True'  as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing IsEventService to 'True'  as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False'  as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing MemorySafetyMargin to '80' percent as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing MemoryThreshold to '90' percent as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: w WARN: Initializing UrlRoot to default value of ''  because it was incorrectly specified in Configuration file as ''.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing IsWebServiceEnabled to 'True'  as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing IsReportManagerEnabled to 'True'  as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing MaxConnections to '2'  as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing Timeout to '10' second(s) as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing AppID to '(Default)'  as specified in Configuration file.
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Initializing CacheLevel to 'Default'  as specified in Configuration file.
    resourceutilities!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Reporting Services starting SKU: Standard
    configmanager!DefaultDomain!6728!12/18/2014-14:54:37:: e ERROR: Failed to get url configuration section.
    configmanager!DefaultDomain!6728!12/18/2014-14:54:37:: e ERROR: Failed to get url configuration section.
    configmanager!DefaultDomain!6728!12/18/2014-14:54:37:: w WARN: IsApplicationUrlSubsetOfReportServer() -- Failed to get url configuration section.
    configmanager!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Using report server internal url .
    configmanager!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Using report server external url .
    configmanager!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Using url root .
    rshost!rshost!6728!12/18/2014-14:54:37:: i INFO: Configuring maxPhysicalCpu=4, minLogicalCpu=0
    rshost!rshost!6728!12/18/2014-14:54:37:: i INFO: Logical processor per physical processor 16
    rshost!rshost!6728!12/18/2014-14:54:37:: i INFO: Logical processor per core 2
    rshost!rshost!6728!12/18/2014-14:54:37:: i INFO: Maximum logical CPU is 32
    library!DefaultDomain!6728!12/18/2014-14:54:37:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    servicecontroller!DefaultDomain!6728!12/18/2014-14:54:37:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. 
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: SQLDump flags: ReferencedMemory, AllThreads, SendToWatson
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: MiniDump flags: DataSegs, UnloadedModules, ProcessThreadData
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Dump on: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Do not dump on: System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException,Microsoft.ReportingServices.WmiProvider.WMIProviderException
    library!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Minidump location: E:\Program Files\Microsoft SQL Server\MSRS11.INSTANCE2\Reporting Services\Logfiles
    library!DefaultDomain!6728!12/18/2014-14:54:37:: v VERBOSE: Setting unhandled exception handler
    appdomainmanager!DefaultDomain!6728!12/18/2014-14:54:37:: i INFO: Appdomain:2 WindowsService_0 started.
    library!WindowsService_0!6728!12/18/2014-14:54:37:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    servicecontroller!WindowsService_0!6728!12/18/2014-14:54:37:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
    error. 
    library!WindowsService_0!6728!12/18/2014-14:54:38:: i INFO: SQLDump flags: ReferencedMemory, AllThreads, SendToWatson
    library!WindowsService_0!6728!12/18/2014-14:54:38:: i INFO: MiniDump flags: DataSegs, UnloadedModules, ProcessThreadData
    library!WindowsService_0!6728!12/18/2014-14:54:38:: i INFO: Dump on: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException
    library!WindowsService_0!6728!12/18/2014-14:54:38:: i INFO: Do not dump on: System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException,Microsoft.ReportingServices.WmiProvider.WMIProviderException
    library!WindowsService_0!6728!12/18/2014-14:54:38:: i INFO: Minidump location: E:\Program Files\Microsoft SQL Server\MSRS11.INSTANCE2\Reporting Services\Logfiles
    library!WindowsService_0!6728!12/18/2014-14:54:38:: v VERBOSE: Setting unhandled exception handler
    resourceutilities!WindowsService_0!6728!12/18/2014-14:54:38:: i INFO: Reporting Services starting SKU: Standard
    library!WindowsService_0!5c98!12/18/2014-14:54:38:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    library!WindowsService_0!5c98!12/18/2014-14:54:38:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
    error. 
    library!WindowsService_0!5c98!12/18/2014-14:54:38:: e ERROR: ServiceStartThread: Attempting to start service again...
    rpcserver!DefaultDomain!5c98!12/18/2014-14:54:38:: i INFO: RPC Server started.
    servicecontroller!DefaultDomain!5c98!12/18/2014-14:54:38:: i INFO: RPC Server started. Endpoint name ='ReportingServices$MSRS11.INSTANCE2'
    rshost!rshost!370c!12/18/2014-14:54:38:: w WARN: Endpoint 2 is enabled but no url is registered for vdir=, pdir=E:\Program Files\Microsoft SQL Server\MSRS11.INSTANCE2\Reporting Services\ReportServer.
    rshost!rshost!4e68!12/18/2014-14:54:38:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=, pdir=E:\Program Files\Microsoft SQL Server\MSRS11.INSTANCE2\Reporting Services\ReportManager.
    rshost!rshost!4e68!12/18/2014-14:54:38:: i INFO: Endpoint 4 is disabled and no url is registered vdir=, pdir=E:\Program Files\Microsoft SQL Server\MSRS11.INSTANCE2\Reporting Services\ReportServer\ReportBuilder.
    resourceutilities!DefaultDomain!6728!12/18/2014-14:54:38:: i INFO: Maximum memory limit is 65536Mb
    rshost!rshost!6728!12/18/2014-14:54:38:: i INFO: Derived memory configuration based on physical memory as 67108864 KB
    rpcserver!DefaultDomain!432c!12/18/2014-14:54:38:: i INFO: Process monitoring started.
    servicecontroller!DefaultDomain!3a4c!12/18/2014-14:54:38:: i INFO: Total Physical memory: 274810261504
    Thanks.

    This was to do with NIC settings on the SQL server. There was a mis-configuration where data was taking long time to copy. Once we have corrected this, all started to work just fine.

  • HELP! MacMini starting up in Verbose Mode

    Hi,
    My Mac Mini seems to be sarting up in Verbose Mode (black background with white type). Any ideas why this is happening? and how do I stop it?
    I've run Disk First Aid off the installion CD and its fixed all the problems that it found, but it still happening. Do I need to wipe the HD and start all over again, or try to just re-install the OS?
    Any words of wisdom?
    Thanks!
    Su
    Mac Mini   Mac OS X (10.4.9)  

    also download and install onyx
    http://www.titanium.free.fr/pgs2/english/download.html
    once installed, open onyx and go to the parameters tab, then go to the tab under that named login. find the one that says startup mode. select normal mode and it should reset it to normal.
    hope this helps
    -bjarec

  • Suddenly, Macbook doesn't boot up in single user mode or verbose mode

    Hello, I use the single-user boot up quite often to check permissions and do a fsck after my mac crashes.
    I do this by pressing Apple(Command)-S at startup or cmd-V for the verbose mode. I do this all the time.
    But now my Mac won't take it anymore. It just refuses to accept any key combo. Any ideas why this is happening?
    thanks.

    Hi Jose, actually you don't have to boot to single user and repair permission all the time. Just perform that after you update your software and or hardware.
    Can you start up normally and then use your keyboard as usual, or is the keyboard refuse to do so?
    Try to reset your PRAM and or PMU to refresh your hardware behavior.
    http://docs.info.apple.com/article.html?artnum=2238
    http://docs.info.apple.com/article.html?artnum=303319
    Good Luck.

  • IMac won't boot up. Stuck in "verbose mode" ??

    I've had this problem on and off for a few weeks now. I either restart my iMac after installing some new software-or for other reason- and my computer won't boot up. Sometimes it will stay at the white screen with the grey apple for hours if I leave it there. I've tried all the tricks with key commands. I even reinstalled my software, which worked, but now its happening again. Today, I restarted my iMac, and the same thing is happening, except sometimes it will go into what I've heard called- "verbose mode." The screen is black and white command text appears in the upper left hand corner. Here are some examples of what appears...
    No Airport driver found.
    Exited abnormally. Bad system call.
    Repawning too quickly! throttling
    10 more failures without living at least 60 seconds will cause job removal.
    Will restart in 10 seconds.
    (this will continue until it has restarted and failed 10 times. After this is done, it will display one of the following...)
    too many failures in succesion
    OR
    local:/root# (continuously flashes on the screen)
    OR
    localhost:/ I have no name!# AppleYukon- eno link active, 100-Mbit, full duplex, flow control disabled.
    I really don't know what to do. I'm really frustrated with my iMac. I've had to replaced a dead hard drive within the 6 months of my purchase, and now it is acting crappy again.
    Can anyone help?
    Thanks.

    I tried using the disk utility on the grey disks, but
    they can't repair the error on my HD. I can't restore
    the original software from the disks either... there
    is an error when I try.
    No, you can't restore while the current OS is in place, due to the fact that your 10.4.8 isn't compatible with the older version (10.4.4) that's on the install DVDs. Once a Mac OS is in place, it can only be upgraded, not downgraded. You'll have to choose either:
    to "Archive & Install" which would set aside your current system unerased until the new installation is completed and your current settings are transferred over - at which point you can erase the archived OS.
    to entirely erase and reformat the HDD, then install a fresh OS.
    Use the install disc's version of Disk Utility to perform either. First, though, you probably need to do a PRAM reset - that often clears things up so that you won't get an error message.
    To reset the PRAM:
    1. Shut down the computer.
    2. Locate the following four keys on the keyboard: Command (Apple logo), option, P, and R. You will need to hold these four keys down simultaneously in step 4.
    3. Start up the computer.
    4. Press and hold the Command-option-P-R keys. You must press this key combination after the startup chord sounds, but before the gray screen appears.
    5. Hold all four keys down until the computer restarts and you hear the startup chord for the second time.
    6. Release the keys.

  • Freezing at startup - weird message when starting up in verbose mode

    My macbook pro, only about 2 months old, freezes a lot while its starting up. i have to keep turning it off and on for it to work. It gets stuck at the grey screen with the apple and the loading icon.
    I decided to start up in verbose mode and maybe i can see what the problem is. So i did just that and i got this error message:
    SATA WARNING: completing a zero block transfer.
    it keeps repeating that message and scrolling down the screen forever.
    I have no idea what that could be.

    Most likely a problem with the disk and/or some corruption of the directory. Be sure to back up your own data if you haven't done so already. Then boot from your install disk and go to the menu bar and select Disk Utility and then Repair Disk. If it reports a problem and fixes it, run it again until everything comes up clean. If it reports a problem it can't fix you could invest in DiskWarrior, or, if you have AppleCare I believe you got a free copy of TechTool, you could try running that.
    Francine
    Francine
    Schwieder

  • TS2570 iMac won't boot, GSOD with Flashing Question Mark, safe/verbose mode not possible

    I have an iMac 24", just over 2 years old running OS X v10.5 (Leopard). Mighty Mouse and bluetooth keyboard, no peripherals.
    It slowed enormously over the last few weeks and has now ceased to boot.
    On switching on I hear the chime (blank grey screen initially), the grey screen hangs for approx 30sec before the flashing folder/?mark icon appears.
    There is no further progress.
    Boot key combination results:
    Can reset NVRAM (Option-Command-P-R)
    Cannot boot to safe mode
    Cannot boot to startup manager
    Cannot boot to verbose mode
    Cannot boot from target media (DVD etc)
    Cannot boot to AHT mode
    Cannot boot to single user mode
    I have followed the steps here http://support.apple.com/kb/TS2570
    Disconnect, test peripheral devices and network cables - done - de-powered and rebooted. No difference.
    Perform a Safe Boot- this does not work.  I am familiar with the boot combinations and timings. The safe boot leads to the same flashing folder/?mark icon. I have also tried verbose, single user, AHT and startup manager with the same result.
    Reset the NVRAM / PRAM - done - this worked and kicks the system into an auto-reboot after 3-5 seconds. This also demonstrates the Keyboard is fine. The subsequent boot fails at the same point via normal, safe or verbose boot instructions.
    Start from your Mac OS X Install disc; use Disk Utility – I never received an OSX install disk.  I have the original box with receipts etc, the only disk present is an unsealed version of iLife (yeah thanks Apple).  Where would I get one?
    Check your cables and power source – done - all fine.
    Remove third-party RAM and internal hardware – not applicable.
    Perform an Archive and Install installation of Mac OS X – how would I do this when I cannot boot the device?
    Perform an Erase and Install installation of Mac OS X as a last resort – how would I do this when I cannot boot the device?
    To me the problem looks like a HDD failure.  I had windows (dual boot) professionally installed when I bought the iMac and since the Windows boot option is also not visible (startup manager itself does not work) I suspect the system can’t find bootable media because the HDD isn’t spinning.
    An OS corruption would generally affect one or the other but presumably not both Operating Systems simultaneously.
    It's hard to be certain, but I’m sure it used to make more noise.
    I had a look into opening it up and troubleshooting the physical components but it’s hard to know where to start.  There are no obvious ways in and I’m not a professional so decided to post a question here rather than hack it open.
    I'd be grateful if you could suggest next steps here, or is it time to go dig a hole in the garden?  I certainly expected more than 2yrs life from a £1200 unit.
    Many Thanks,
    Ryan

    Thanks for the response,
    I bought the iMac new, 17th Jan 2010, all receipts intact but no extended warrenty. I declined the Applecare Plan for two reasons.
    (1) The sales rep seemed very confident in the product build. In fact the main justification of the price tag was the quality of the device. I'd also never had an apple device malfunction at that stage.
    (2) The incumbent EU regulations are quite fair in so much as legislation dictates electrical goods should be manufactured to function for a 'reasonable' lifetime. I would be morally uncomfortable paying for rights I theoretically already have.
    I triple checked on the OS X disks you mentioned but no joy. Unusual as it may be, the box has not been used and it's contents reflect the day of purchase. 
    I'm happy to order the OS X v10.5 DVD and attempt a boot to the disk utility, I don't mind risking a few bucks on a potential fix.  I'll need to figure out where to order the disk, the call centre is closed ATM so watch this space.
    What I'd really be interested in is; (a) is there a known diagnostic routine to determine the HDD functionality and (b) it is possible to replace/upgrade the HDD?  This for me is where the iMac loses ground against a conventional PC in terms of motherboard/component access. It's far superior from an asthaetics perspective while things are running smoothly and the OS is great but the first sign of a hardware malfunction and there seems little or no scope to self-medicate the device.
    The disk has around 40-60 GB free space.
    I don't have a second Mac, nor any friends or family with a Mac to 'borrow' for the disk utility test you mentioned. I'll hunt around this afternoon/week but my instinct tells me finding a locally accessable Mac running 3 yr old OS X might not be possible. Again, watch this space, I'll post any further developments. 
    In the meantime any further assistance or answers to the above questions on determining HDD status would be much appreciated. No progress has yet been made on the original issue of failing to boot.
    Many Thanks
    Ryan

  • Turned on fileVault AND firmware password, can't boot into verbose mode?

    Just out of curiousity, I turned on fileVault AND firmware password on my retina macbook pro,
    and when I boot up holding command-v, instead of getting the firmware password screen, I get the filevault password screen.
    Is this normal and expected behaviour?

    The firmware password disables that shortcut; verbose mode can still be used by using the Terminal to change the NVRAM boot arguments, which requires an administrator password.
    (100118)

  • How to disable the verbose mode in HTTPS ?

    Hello Everybody,
    I'd like to know how I can make an https connection in which the text of the transaction with the distant server doesn't show in the console
    here is my code :
    URL rawURL = new URL(url);
    if(rawURL.getProtocol().startsWith("https"))
         System.setProperty("java.protocol.handler.pkgs","com.sun.net.ssl.internal.www.protocol");
         System.setProperty("javax.net.debug","ssl,handshake,data,trustmanager");
         Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
         TrustManager[] trustAllCerts = new TrustManager[]{
         new X509TrustManager()
              public void checkClientTrusted(X509Certificate[] chain, String authType) {}
              public void checkServerTrusted(X509Certificate[] chain, String authType) {}
              public X509Certificate[] getAcceptedIssuers() {
                   return null;
         HostnameVerifier hv = new HostnameVerifier()
                         public boolean verify(String urlHostName, SSLSession session)
                              return true;
         /*Initialisation de la connection*/
         try
              SSLContext sc = SSLContext.getInstance("SSL");
              sc.init(null, trustAllCerts, new java.security.SecureRandom());                         HttpsURLConnection.setDefaultSSLSocketFactory(sc.getSocketFactory());
              HttpsURLConnection.setDefaultHostnameVerifier(hv);
              HttpsURLConnection.setFollowRedirects(false);
         catch(NoSuchAlgorithmException nsae){}
         catch(KeyManagementException kme)
                         kme.printStackTrace();
         /* creation de la connection */
         urlCon = ((HttpsURLConnection)rawURL.openConnection());
    urlCon.setInstanceFollowRedirects(true);
    urlCon.setReadTimeout(12000);
    urlCon.setConnectTimeout(7000);
    urlCon.addRequestProperty("User-Agent","Mozilla/5.0 (X11; U; Linux i686; fr; rv:1.7.12) Gecko/20050922 Firefox/1.0.7 (Debian package 1.0.7-1)");
    urlCon.addRequestProperty("Host",urlCon.getURL().getHost());
    urlCon.addRequestProperty("Accept-Language", "fr,fr-fr;q=0.8,en-us;q=0.5,en;q=0.3");
    switch (urlCon.getResponseCode())
    }Thank's !

         System.setProperty("java.protocol.handler.pkgs","com.sun.net.ssl.internal.www.protocol");You don't need that unless you're running 1.3 or earlier.
         System.setProperty("javax.net.debug","ssl,handshake,data,trustmanager");You don't need that unless you want verbose mode.
         Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());You don't need that unless you're running 1.3 or earlier.
         TrustManager[] trustAllCerts = new TrustManager[]{You don't need this thing at all unless you like (a) code that doesn't implement its specification correctly and (b) insecure code. If your truststore doesn't trust the server certificate, that's the server's problem. Get them to fix it, by getting their certificate signed by a recognized CA.
         HostnameVerifier hv = new HostnameVerifier()Much the same remarks. This piece of code is insecure and it just addresses a problem with the server certificate. Get the problem fixed.
    Otherwise in both cases you may as well not be using HTTPS at all - there is no security.
         catch(NoSuchAlgorithmException nsae){}Never ignore an exception.
    urlCon.setInstanceFollowRedirects(true);If you have that you don't need the global setFollowRedirects call above, so you should remove it.

Maybe you are looking for

  • Exchange Rate is stored in field..... ?  (PO Document)

    Hi guys, Im using SRM 4.0sp8 with ECS. THE PROBLEM: I have a PO document that was created in MXN (locally), then the purchaser guy changed to USD and SRM  converted the amount of money succesfuly.     However, the PO document was replicated to R3 wit

  • Retrieving video from itunes

    i bought a macbook pro and downloaded videos from itunes and some were digital copies of blue rays but i had to return the old mac for a new one and now i cant retrieve my videos under purchased how can i get my videos back some of them being digital

  • New computer where are my songs?

    I have a new computer but when l sign into itunes my songs are not there??  Where are my song?

  • Fatal problem.. Please help me..

    Hi all I have a fatal problem when executing any Java based application. when running an webApplication I get this error: Null pointer exception Internal error 500 When running a server-client application I get this one: java.io.exception No output f

  • HI can anybody   facing  IDOC'S ISSUE

    HI can anybody   facing  IDOC'S ISSUE    SEND IT TO ME  I WILL SOLVE   FOR YOU THANKS AND REGARDS RAJU