Verification Failure with Fujifilm DVD+R (1X-16X)

I picked up a spindle of these (paying pretty much next to nothing, so there you are .... !) and wound up with multiple burn failures, all with the same error.
Was doing a very small and simple iDVD slideshow presentation for a memorial service and managed to turn 4 in a row into coasters. This was with two differing versions of the slideshow and the failure occurred at the same place, and in the same way, whether burning directly from iDVD or after saving the file out as a disk image and then burning from Disk Utility.
Failures took place at the verification stage, which basically never started. Error messages differed depending on how the burn was being done, but got the standard "Failed to verify ... try other media ..... codes ...." message.
Changing over to my remaining HP DVD-R 16X stock allowed me to burn without error from both approaches.
As far as I can tell, the Fuji +R media should work although, evidently, it will only work at +2X speeds (wish I'd checked these forums first for that little factoid!). Would be most happy to hear your best guesses that this represents a problem with the media and not the drive, but if it shows some drive problem that's worth figuring out also. TIA for any input or assistance.

Klaus,
Thanks, and I agree ... I should be able to burn the DVD+R's but, unfortunately, it seems I can't.
I tried twice more today (once from Backup.app, the other a Finder-controlled Burn Folder) and had the same failures in the same places (verifying) as before. Two more coasters.
Finally, it's not a matter of choosing a lower burn rate; the scrollwheel menu is stuck at x2 with no other options available. I'd be happy to live with that if only it would work.
Oh, well. They're still useful during solar eclipses.
M.

Similar Messages

Failure with mpeg2 dvd

I'm rendering the same sequence of about an hour to different formats mostly hd 1080p h.264 and pal to mpeg2 dvd so encore wont work hard to convert.
last days I cant get the mpeg 2 dvd to render, I keep getting errors/failure.if I render just mpeg2 it renders perferct.
so until I could ditch the DVD for good I realy need the AME queue with mpeg2 dvd for my workflow.
I hav'nt checked it but I'm sure it will export mpeg2 dvd directly from PP

the settings are done in PP
by the way if I switch to mercury engine softwere only it renderes but very
very slow
2014-05-19 22:52 GMT+03:00 SAFEHARBOR11 <[email protected]>:
failure with mpeg2 dvd created by SAFEHARBOR11<https://forums.adobe.com/people/SAFEHARBOR11>in *Adobe
Media Encoder (AME)* - View the full discussion<https://forums.adobe.com/message/6392014#6392014>

Adobe Genuine Software Verification Failure with PSE 13 DVD

This is the third DVD I have purchased that tells me the same thing. I am running Windows 7, have plenty of room to load this product. Is there some missing file or something I need to do to get beyond this?

Warning: "Adobe Genuine Software Validation Failure..." | Windows
Genuine Verification failure downloading or installing | CS6

12c: Signature digest verification failure with SAML msg protection policy

Hi,
I am using the policy wss10_saml_token_with_message_protection_service_policy for Service Bus 12c proxy service and getting the error while verifying the signature digest. I am doing the testing using SOAP Ui.
I am able to understand it's an issue in verifying the signature digest but unable to debug and conclude the cause of this issue as i did the necessary setup. And using the appropriate keys for encryption and signing. Also tried overriding the policy configuration at policy level and Service bus end point level too.
Policy Settings are:
- Time Stamp included, Signing entire request body, no signing for SAML token and X 509 token.
- No signature encryption checked and kept default values for all other attributes.
Configured only Message Security section in WSM Domain Configuration and used JKS as the key store. Used the trusted certificate entry of client as signing alias and own public key as enc alias.
Following is the error stack trace i am seeing. Please let me know if there is any thing missing or any other insights into this issue. The logs generated by setting xml.debug.verify also did not help much. I am thinking the issue may be something to do with Canonicalization of XML.
Caused by: com.bea.wli.sb.security.wss.WssHandlerException: General web service security error
at com.bea.wli.sb.security.wss.WssHandlerImpl.generateInboundRequestBLE(WssHandlerImpl.java:1499)
at com.bea.wli.sb.security.wss.WssHandlerImpl.handleInboundRequestException(WssHandlerImpl.java:1457)
at com.bea.wli.sb.security.wss.WssHandlerImpl.handleInboundRequestException(WssHandlerImpl.java:1444)
at com.bea.wli.sb.service.disi.handlerchain.handlers.InboundWssPhase1DISIHandler.dispatch(InboundWssPhase1DISIHandler.java:107)
... 43 more
Caused by: com.bea.wli.sb.security.wss.WssException: oracle.wsm.security.SecurityException: WSM-00061 : Signature digest verification failure. The system property xml.debug.verify should be enabled for the details about the digest calculations during verification phase (note xml.debug.verify slows down the signature verification for very large messages).
Caused by:-
at com.bea.wli.sb.security.wss.wsm.WsmInboundHandler.handleRequestException(WsmInboundHandler.java:350)
at com.bea.wli.sb.security.wss.WssHandlerImpl.handleInboundRequestException(WssHandlerImpl.java:1442)
... 44 more
Caused by: oracle.wsm.security.SecurityException: WSM-00061 : Signature digest verification failure. The system property xml.debug.verify should be enabled for the details about the digest calculations during verification phase (note xml.debug.verify slows down the signature verification for very large messages).
Caused by:-
at oracle.wsm.security.policy.scenario.processor.Wss10MessageSecurityProcessor.verify(Wss10MessageSecurityProcessor.java:482)
at oracle.wsm.security.policy.scenario.processor.Wss10X509TokenProcessor.verify(Wss10X509TokenProcessor.java:301)
at oracle.wsm.security.policy.scenario.executor.Wss10SamlWithCertsScenarioExecutor.receiveRequest(Wss10SamlWithCertsScenarioExecutor.java:184)
at oracle.wsm.security.policy.scenario.executor.SecurityScenarioExecutor.execute(SecurityScenarioExecutor.java:642)
at oracle.wsm.policyengine.impl.runtime.AssertionExecutor.execute(AssertionExecutor.java:44)
at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.executeSimpleAssertion(WSPolicyRuntimeExecutor.java:515)
at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.executeAndAssertion(WSPolicyRuntimeExecutor.java:427)
at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.execute(WSPolicyRuntimeExecutor.java:374)
at oracle.wsm.policyengine.impl.PolicyExecutionEngine.execute(PolicyExecutionEngine.java:103)
at oracle.wsm.agent.WSMAgent.processCommon(WSMAgent.java:1270)
at oracle.wsm.agent.WSMAgent.processRequest(WSMAgent.java:563)
at oracle.j2ee.ws.common.wsm.SecurityAgentTube.processRequest(SecurityAgentTube.java:201)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:1136)
at com.sun.xml.ws.api.pipe.Fiber.access$100(Fiber.java:127)

Please do let me know if anybody has insights into this issue. I am testing it from SOAP UI and i am completely stuck and can't proceed further.. We did face similar issue in 11g which was gone after upgrading to later OSB releases.

How can I resolve a "genuine software verification failure" during installation from DVD?

I have a set of 3 DVDs from my organization that has volume-licensed Adobe CS6 Production Premium.
I need to install it on a laptop that has no DVD drive.
I can mount the ISO image of the first DVD disk as a network drive, and can then proceed through installation. When I am asked to "insert the second disk", I mount the second ISO image, and installation proceeds. In the process, I enter the serial number / key provided by our IT department and sign in with my Adobe ID.
When installation finishes, however, I am informed there was an Adobe genuine software verification failure. The customer support link leads to this forum.
How can I resolve this, please?
I have searched the forums for related issues and can only find reports of similar problems for downloaded software. The advice there is to re-download the software. Should I expect my volume-license key to work for the downloaded software?
Best regards,
D Kreil

Hi dkreil,
Please refer the KB : http://helpx.adobe.com/x-productkb/global/digital-certificate-revoked-aam.html
Regards,
Ravi.

Unable to Burn DVD due to Verification Failure

I am trying to make a backup copy of my Leopard Install DVD. It is a 7.2 GB file so I used Disk Utility to make a disk image of the DVD, then tried to burn the disk image to a Sony DVD+R Dual Layer disk (8.5 GB). Everything seemed to be working just fine, the burn process completed but at the very end I got an error message stating: Unable to burn "MAC OS X Install DVD Copy" (verification of the burn failed)
Is this a factor of the media used or something else? The disk image I created on my desktop appears to be fully functional. I put a copy of the disk image on a backup drive but I would prefer to have it on DVD media if possible.

Hi Howwow,
Yes I was stuck with Sony DVD+R DLs tonight but thought I would try one anyway. I have to use a Dual Layer DVD due to the file size. From my reading on these forums it seems the DVD+R DLs are recommended. Single Layer DVDs seems to favor DVD-R for burning. I have heard that the Verbatim brand seems to burn well with consistency. I will try to locate some Verbatim DLs of both types tomorrow unless anyone has other specific suggested media or reasons for the verification failure.
Thanks for the input.

DVD Burn/Verification failure copying jpg images

I am trying to backup my files onto DVD's for backup purposes with one DVD per year.
I am using Philips DVD -R disks (max 8x I think) and I have had about 6 fail in the verification stage and a couple that verify OK but when I try and access the files after ejecting and relaoding my iMac whirs for a while and then just chucks the DVD out of the drive with no message.
Finder seems to only have an option to burn at x1 speed and I have seen in other posts that x4 or x6 or x8 may be better.
Can anyone throw any light on this problem please?
Thanks in hope.

Try Verbatim DVD-R. Most reliable brand.
Finder seems to only have an option to burn at x1 speed and I have seen in other posts that x4 or x6 or x8 may be better.
That's using Toast or Disk Utilty with iDVD projects, not data.

Is there a firmware update for burning at 16x with Matshita DVD-R UJ 845E?

Is there a firmware update for burning at 16x with Matshita DVD-R UJ 845E? I'm trying to burn a DVD using iDVD on my iBook. The blank DVD's are Memorex 16x (I've used Memorex 8x successfully in the past), the DVD drive is specified above. The finder tells me that the drive has reported an error "sense key=medium error/ sense code=0x73, 0x03" I couldn't find firmware updates in either Panasonic Matshita or Apple websites. Am I forever confined to 8x DVD-R's with this laptop?
ibook G4 Mac OS X (10.4.7)
ibook G4 Mac OS X (10.4.7)

First, welcome to the discussions.
Sorry, No Firmware update to allow you to burn at 16X.
The drive you have is only capable of burning at 8X.
You will also find that for the most part when you recieve errors that it is more often than not attributed to MEDIA.
There are so many problems with the cheaper media they are to numerous to cover.
DVD is not at all like CD burning, in that the technology as well as the Optical Drives used, seem to be touchy, and require the use of good Media. This will allow you trouble free burning without errors.
http://www.digitalfaq.com/media/dvdmedia.htm
You will also find that the reason that DVD-R Media works the best, is because it is the most wirely used and recognised in both Computers and Players.
If I may suggest. There are several 16X DVD's on the market.
Take your time and look at the back of the Jewel Cases and read. You will see that the better Media will tell you that it will burn at 1X through and including 16X, if your drive is capable of handleing these speeds. I prefer Maxell 16X DVD-R Media in the individual Jewel Cases. This Media burns at the slower speeds on the older Superdrives that will only burn at 1X or 2X.
Like many others I have learned my lessons the hard way.
Cheers Don

To BALTWO:I really appreciate the fast sent solution about my failure to burn DVDs with Lion, but I am 89 years old and think I know something about computers, but don't have a clue about ZAPPing PRAM nor RESET SMC. I also can't find any evidence of a p

I really appreciate the fast sent solution about my failure to burn DVDs with Lion, but I am 89 years old and think I know something about computers, but don't have a clue about ZAPPing PRAM nor RESET SMC. I also can't find any evidence of a preserved earlier OS (Snow Leopard). I also don't know how to partition further my drive after all this time…(I used to have Parallels partitioned) but as I said I cannot find any where on the HD SN. Is it possible that it doesn't exist anymore? Not too technical, please, unless that is the only possible answer to this whole delemna..

Blue colored text in these forums usually indicates a clickable link. The two I posted in https://discussions.apple.com/message/18789716#18789716 bring up Apple's articles on those subjects. For partitioning information, peruse Disk Utilities help files, especially
Changing a disk’s formatting and partitions
BTW, the proper way to respond to a post is to use the Reply button and not start another. Good luck and hope you make it to your tenth decade—I'm in my eighth.

Verification Failure and potential counterfeit software

I recently purchased a student license and DVD Adobe Creative Suite 6 Design Standard for Windows from www.srs.usg.edu, the supplier of software for my university. After partially downloading, the installer said there was a verification failure and that "the product you are trying to install is not an Adobe Genuine Software and appears to be counterfeit.
The only issue I can think of is that I downloaded a free trial of Photoshop CS6 that is still on my computer. I didn't uninstall it before trying to install my purchase because if it didn't work, I didn't want to be left without a program to finish my homework on. If this is the solution, I can try that, but I would think I would've gotten a different notification if that were the error.
Is there a solution? Thank you

The Genuine Software Failure error could be due to damaged installation media. Please try downloading the trial of Creative Suite 6 Design Standard from http://www.adobe.com/cfusion/tdrc/index.cfm?product=design_standard. You can then try the installation again with the freshly downloaded install files.

Unable to install Dreamweaver CS6 Upgrade ! from Hard Drive DUMP - Error : Adobe Genuine Software Verification Failure

Hello,
I am Unable to install Dreamweaver CS6 Upgrade from CS4 from Hard Drive DUMP -
Error :Installation Failed
Adobe Genuine Software Verification Failure
The product you are trying to install is not an adobe Genuine Software and appears to be counterfeit.
Can any one help me with this issue. I earlier installed it from DVD but, i am unable to find DVD. I have a copy of full DVD Dump in network.
Can someone help me fix the issue.
Note: I have installed Dreamweaver CS4 with serial number.and am trying to install upgrade over cs4.
Please help.
Thank you,
Sin

It was because i was installing directly from network dump.
I've managed to install and register software.
Thanks and my problem is resolved.

Pavilion15 e036ss WIN8 (verification failed and empty DVDs obtained)

Hello,
I'm having a lot of trouble creating a DVD revocery set with laptop HP 15-e036ss with WIN8 64.
I have two units of this notebook and I obtain an error after verification phase when creating the first DVD. This happens on both units. HP Recovery Manager prepares the image, then writes it and when finishes the verification I get an error message telling that verification process was not correct and the creation stops.
I have tried several DVD brands, Verbatim 4x DVD+R, Verbatim 16x DVD-R, SONY 16x DVD-R, etc. and I always get the same error on BOTH laptops.
What is really odd is that after this error, when I try to read the DVD, it apperars to be BLANK (empty), in fact if I try to write another Recovery Set I can use the same DVD and HP Recovery accepts it and starts writting. So I'm afraid that HP Recovery is not writting anything on the write phase at all. I've thrown away more than 10 DVDs (because I didn't realize that they were probably blank).
I would appreciatte any suggestion to solve that issue. Alternatively I would prefer to write the Recovery on an 32 GB flash USB but it seems that as I started creating DVDs the program doesn't give that option any more, is there any possibility to create the recovery on flash memory having in account that i still have not created any succesful DVD set?
Many thanks,
Pep

Please see Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 8) for information on creating recovery disc or USB flash drive.
The creation process takes about 30 minutes per DVD. The entire recovery set does not need to be created in one session. The Recovery Media Creation software can be aborted at any time, except during the writing (burning) process, by clicking Cancel . The next time the Recovery Media Creation software program is run, it automatically starts where it last stopped.
HP Recovery Media Creation software creates a set of system recovery discs using blank, writable DVDs (DVD-R, DVD-R DL, DVD+R, or DVD+R DL). HP recommends using blank DVD+R discs. Use a name-brand label from a manufacturer you trust, as these recovery DVDs are very important.
I have had great experience with HP, Sony, and TDK 16x DVD+R discs in the creation of dozens of Recovery Disc sets.
if you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Downloading DesignWebPremium_CS6_LS16.dmg Content verification failure (Content invalid)

we are trying to download the DMG package of CS6 and it seems to be corrupted on Adobe servers?
We tried Akamai several times, downloading it to Windows PC (via Firefox 13.0.1) or Apple Mac Pro (Safari on OSX 10.7) with same result:
Content verification failure (Content invalid)
Then we tried using the alternate download (direct) method and file was corrupted too, upon starting the installer on Apple OSX 10.7 it said "checksum verification failed".
any ideas?

finally the download succeeded on the 7th attempt... no comments, half of day wasted, but at least the product is installing finally.

The kerberos PAC verification failure when all users of only one RODC Site, trying to get access iis webpage of different site using Integrated Windows Authentication

The kerberos PAC verification failure when all users of only one Site which having only one RODC server(A), trying to get access iis webpage of different site which having WDC server(B) using Integrated Windows Authentication. But when they accessing the
website using IP address, it is not asking for credentials as I think it is using NTLM Authentication at that time which is less secure than Kerberos.
Note that:- All user accounts and Computers of the RODC has been allowed cache password on the RODC. Nearest WDC for the RODC (A) is the WDC (B).
The website is hosted on a windows server 2003 R2 and generating below system event log for those users of the RODC site :-
Event Type: Error
Event Source: Kerberos
Event Category: None
Event ID: 7
Date:
<var style="color:#333333;font-family:'Segoe UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">date</var>
Time:
<var style="color:#333333;font-family:'Segoe UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">time</var>
User: N/A
Computer:
<var style="color:#333333;font-family:'Segoe UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">computer_name (the 2003 server)</var>
Description: The kerberos subsystem encountered a PAC verification failure. This indicates that the PAC from the client<var style="color:#333333;font-family:'Segoe
UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">computer_name</var> in realm <var
style="color:#333333;font-family:'Segoe UI', Arial, Verdana, Tahoma, sans-serif;font-size:13px;line-height:normal;">realm_name</var> had
a PAC which failed to verify or was modified. Contact your system administrator.
This issue has been raised for last one week. Before that everything was fine. No Group Policy changed, Time also same.
In this situation do I need to do Demotion of the RODC and re-promote it as RODC again or is there any other troubleshooting to resolve it.
Thanks in Advanced
Souvik

Hi Amy,
Thanks for your response
I noticed that Logon server could become incorrect again after user re-login or restart of a workstation.
It seems root cause is different. Need a permanent solution.
The Workstations of the RODC site are getting IP from a DHCP server by automatic distribution of IP from a specific subnet for the site only. The RODC is
the Primary DNS server for the site.
I have checked the subnet and it is properly bound with only with that AD site. The group of users and workstations are in the same site AD organisational Unit.
Sometime I restarted the NET LOGON service and DNS server service on ther RODC server and sometime rebooted the server. But the Logon server issue has not fixed permanently.
The internal network bandwidth of the site is better than the bandwidth to communicate with other site.
The server is Windows server 2008 R2 standard and hosting the below roles
RODC
DNS
File server
The server performance is Healthy in core times when maximum users usually logins.
Any further support would be much appreciated Amy
Thanks
Souvik

I can't install the Server Behaviours Extension due to licensing verification failure

I have entered my Adobe CC username and password but can't install due to a licensing verification failure. The details have been correctly entered. I have tried three times and tested the details by logging into here!

Did you encounter this problem when you installed this extension with Exchange Panel? Is it a free or paid extension? Could you find it in “My Stuff” pane of Exchange Panel?

Verification Failure with Fujifilm DVD+R (1X-16X)

Similar Messages

Maybe you are looking for