"Verification is required" does nothing...

If I try to install a free app I'm given a prompt that says "You must enter your Apple ID and password, click Billing Info, and verify your payment information in order to make purchases." If I enter my name and password and click "billing info" the prompt goes away and nothing else happens. How do I install apps from the app store?

U have to check your credit card first wether is active or not, if it is not active then u gave to activate or u can enter the new credit card no putting your new card no u have to in edit info ther u will see enter your card no......
Please free to ask anything thank u…

Similar Messages

"OPEN" button in Purchases list does nothing

My machine is a Mac Pro (5,1; 12-core 2.4GHz; 64 GB RAM). My boot drive is a 1TB Crucial M5, holding about 350GB. There are also two 3TB and one 4TB hard drives installed in the machine. I updated to Yosemite (10.10 -- 14A389) from Mountain Lion (10.8.5) a few days ago. Afterwards App Store indicated required updates for Xcode, Final Cut Pro, Motion, and Compressor. I downloaded all of those updates to completion. On its "Updates" tab App Store reports all of them as having been installed in the last 30 days. However, only older incompatible versions of the software reside in my Applications folder. When I sign-in and inspect my Purchases list in App Store, those applications each show an "OPEN" button instead of an "INSTALLED" or "DOWNLOAD" button. Clicking the "OPEN" button installed Xcode. Clicking their corresponding buttons does nothing in the cases of Final Cut Pro, Motion, and Compressor. There are no unfinished downloads according to App Store. Before I updated to Yosemite I had updated Logic Pro X to v10.0.7. That version of the app is installed and will run. However, it is also shown as "OPEN" in my App Store Purchased list. All of this makes very little sense to me. How do I go about actually installing Final Cut Pro, Motion, and Compressor?

Hi,
I've came across this issue before. I had to remove the less than and greater than ("<" and ">") signs from the LOV template. Go to Shared Components --> Templates and edit the PopUp LOV template.
Andrew.

I can't find creative cloud on my desktop and double clicking the app does nothing.

I can't find CC on my desktop, double clicking the app does nothing. Can't reinstall as it tells me that another version is running, and to quit that version. Can't find the version to quit. Help please.

Hi Kyra22,
Can you please try and restart your machine and then check ? If nothing happens , please navigate to Utilities> Adobe installers to find Creative cloud installer or go to Applications > Creative Cloud > Creative Cloud uninstaller and then uninstall the product from there .
once done with the uninstallation ,please browse to Creative.adobe.com and then reinstall the Adobe Creative Cloud Desktop app .
Please do let us know if this works fine or if you require any further support from our side.
Cheers,
Kartikay Sharma

IPC requirement does not effect sales order

Hi,
I wrote a pricing requirement in java extending RequirementAdapter.
I uploaded it to the CRM system. When the requirement is called, it writes messages to the VMC log and i can see the result of the requirement : "true" or "false" .
The problem is that the result of the requirement does not effect the condition in the sales order - nothing happens no matter what the result value is.
What should I do in order to get an error message in the sales order when the requirement returns false?
Thanks
Tomer

Hi Michael,
If the requirement will not trigger any error message by default according to the returned value, what excaly do I need to do in order to achieve that? Is there a BADI or user exist where I can check the returned value and raise the message?
Thanks,
Tomer

P55M-GD45 : MSI install disc does NOTHING

That's pretty much it. Nothing. I put the disc in and a window comes up declaring that various drivers and utilities may be installed. Well, only the ones the program detects apply to the system. The chipset button does nothing. I click it and it presses and sits there looking pretty.
So, without any drivers, I can't use USB, and without USB, I can't use the internet, which might actually help install some drivers. Am I doing it wrong? I tried just adding the controller's drivers from the disc, but I have no idea which one is correct, and there are hundreds of INFs just sitting around on there.
Everything else looks good...other drivers that aren't greyed out install...whatever. Pretty much anything but what I need to proceed.
Then I tried registering at MSI's forum for help. Bad idea!! I got an activation e-mail which did NOTHING, bringing me to a screen talking about resending an activation code. Did I forget mine? Did I get the e-mail? Want to enter in your activation code to register so the nice people can help? Whatever! None of it does anything. The most infuriating thing to suffer after the driver disc that does nothing. It's not like I haven't built a few computers before...
Help!

Quote
- I have no way of transferring downloaded drivers from this computer to the new one (or detecting which ones to get automatically)
Obviously, you have a way of connecting to the internet, which means that you are able to download the drivers. Are you trying to tell me, that you have absolutely no possibility to get your hand on an USB Flash Drive, an external harddrive or a CD you can burn the downloaded stuff to? If that is the case, I object to believe that it is absolutely impossible for you to change that.
Quote
- This is a public bugmenot account. Say what you will about them, but I would not be talking if not for their help.
Okay, we do not allow such accounts here. I will close/shut it down immediately.
Quote
- After cooling off, I'm guessing the install disc requires SP2 or something which XP doesn't come with.
Yes, it does, definately. But again, that has noting to do with the driver disc.

3000 K100 does nothing but beep

Model #: 57068347
OS: Windows Vista
I went to bed and the computer was working. I wake up the following morning, the screen is blank, and the machine is doing nothing but beeping. I tried cycling the power and still nothing. No POST screen, no response from the keyboard, nothing. Just repeated beeps from the speaker and that's it.
I cruised through the support forums a bit and didn't find much that was useful. Anyone got any ideas?
thanks!

epicdave,
What can you tell us about the beeping? Generally with PCs, there will be a series of long and short beeps in some kind of repeating pattern which can indicate what component is causing the trouble.
Can you discern the number of beeps before the pattern repeats?
Failing that, or more generically I would suspect memory, system board, power supply.   I'm going to suggest that if you are still in warranty that you contact service.   If you are outside of warranty, I'll offer the following things I might try...
1) Memory - remove and reseat the memory. While you have each module out, check the condition of the little gold contacts. If they look dull or have dull spots where the contact is made (you will see the slight rub marks where the socket engages each tiny contact pad on the module) you can gently use a pencil eraser to clean the contacts on the memory - just rub the eraser back and forth a couple times gently and then wipe away any of the eraser material. Re-insert in the sockets and try to power on the PC again.
2) System board - could be any number of componenet failures which would require a board replacement. Depending on the BIOS, the beep codes can sometimes identify which component to confirm the diagnosis. Try removing any expansion cards and power up again.
3) Power supply - less likely as it sounds like it is working to some level since the system is beeping.
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

So what do I do? Audigy = sitting in my pc doing nothi

I posted earlier asking if the eeprom problem would be 'fixed' in x64. It isn't.
Anyone know what I should do now? KX drivers (which have been saving me from running over this card) dont' work on x64, the PYOU drivers are based on the creative, and the creative ones don't work so neither do those 3rd party ones.
My only choice right now is to pull it out.. what should I do? I have no soudn righ tnow, I have a (at the time) $250 Audigy Platinum Ex, and its just sitting there now. I was thinking about the X-FI but forget that, it'll be another piece of hardware that just sits there collecting dust doing nothing. If Creative or even ANYONE here could get this card to work, i'd seriously start considering a fatalty card, but for now, my next card would be a turtle beach. Anyone have any fixes? Sorry for coming off as a jerk, its just that this is really frustrating; to have a card I spent two hundred dollars on and not have it work like everyone else's, and then watching the company not care at all.
I know i'm not alone, i've read the countless posts on this forum. Also if anyone knows if the eeprom bug still happens in the X-Fi or if it doesn't happen, please tell me. Also one more thing, can I use my AUdigy dri've with an X-FI? Thanks. My main priority is still to try to get this one to work though, if it doesn't, I don't know if I'll really want to get an Xfi. If it does, probably get the x-fi for my other pc.
Thanks again for any help, much appreciated.
Message Edited by wzc89 on 02-06-2006 2:25 AM

you have wi-fi on it already. if you are within range of a wireless network, go to "settings" and then "wifi" at the top of the menu, and then select "on."
if there are any networks around, they should show up in the list where it says "select a network" (or something like that). pick one. some networks require a username and password (starbucks) and some do not. if not, you're ready to go (the ipod will hop on). if so, either enter a username/password, or try a non-secured network (no padlock symbol).

I am trying to install a language disc. I clicked on the installer. It ran for a long time without installing. I click stop installing and it says it is stopping but is doing nothing. I am unable to eject the disc or stop anything.

I am trying to install a Portugese language disc. I clicked on the installer icon and it said it was installing, but it ran forever without doing anything. I clicked "stop installing" and it says "stopping", but it is doing nothing. I am unable to eject the disc or do anything because it says an operation is in progress.

Please provide some info on the disc, where it comes from, who made it, etc. Also tell us what version of OS X you are running.

I upgraded from 3.6.13 to Beta 4.0 and now Firefox will not open at all I tried to uninstall to start again but it will not uninstall either it does nothing.

I uninstalled Beta 4 and re-installed 3.6.13 now Firefox will not open at all I tried to uninstall to start again but it will not uninstall either it does nothing, I have been using Firefox for a long time but cannot resolve this problem can anyone help and give me a solution please. As I use Firefox as my web browser it is very frustrating.
The fact it will not uninstall appears to be something completely new as nobody I know who uses Firefox has ever encountered this in the past.

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
If necessary then also see:
* http://kb.mozillazine.org/Browser_will_not_start_up
* http://kb.mozillazine.org/Error_loading_websites

Trying to do a software update, but my macbook pro does nothing after it prompts me to restart

I am trying to do a software update on my Macbook Pro so I can update the new iTunes so I can start using my new iPod. Every time I go through the process of the computer searching for updates and confirming there are software updates, then being prompted to restart my computer, it does nothing. After my Macbook Pro turns on again, nothing pops up and I go into my information and it says I still have the old software. Nothing is prompting me to do the update after I restart my computer, or beforehand for that matter. HELP.

Are you really still running 10.6.2? If Software Update isn't working for you, you may want to try using the 10.6.8 combo update found here -->> http://support.apple.com/kb/DL1399.
If that doesn't work, call back...
Clinton

Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing!

Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

My 4S has stopped ringing. Voicemail's disabled but if you call me, you'll hear it ring your end but it does nothing at mine and freezes if I make a call. Texts are not being delivered or coming through delayed. Ringer is on, tone enabled - help!

My iPhone 4S has stopped ringing altogether. Voicemail is disabled but if you call me, you'll hear it ringing at your end but it does nothing my end and freezes in the phone app if I make a call (doesn't ring or connect and doesn't freeze the phone, just the calling part). Texts are not being delivered or coming through delayed. Ringer is on, tone enabled - help!
I've disabled roaming so it only runs on wifi (this after getting a £4k phone bill...) and I can use Skype, Viber and WhatsApp with no problem at all.
Would really appreciate any help at all!
Many thanks.

Hi there - am with Orange and they said nothing wrong with account and service running normally. They said if they had cut me off I would've received a text (debatable with current message receiving situation!) and when I called out it would say 'calls from this number are barred'. Also if you called me it would say something similar. But it doesn't, it will ring and ring until it rings off but nothing happens at all on my handset. Not even a missed call notification. If I call out, it will display that it is calling the number but that's it. If I cancel the call it will constantly display 'ending call'. If I come out of the phone and go to another app then revist phone it will start calling that last dialled number - without ever getting as far as ringing or connecting.

When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the o

When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the original in my work folder. I need to know how to stop this from happeing and get it back to the way it has been working he last 6 months since i purchased this program.

Hi pissedadobeuser,
Does this issue occur with any particular web page?
Are you able to print the webpage to 'Adobe PDF' to convert it to pdf.
Which Browser version, OS version and Acrobat version are you using?
Regards,
Rave

How do i close the welcome to iMovie screen? Clicking on red button in upper left does nothing. SOS! Thanks!

How do I close the "Welcome to iMovie" screen? Clicking on the red button in the upper left does nothing. SOS! Thanks!

"Continue" was hidden at the bottom of the welcome screen because my display was changed. Some days I'm smarter than others. Or.... :-)

After a firefox "upgrade" was installed automatically, Firefox will not start, even in Safe mode. Clicking on the icon does nothing

after a firefox upgrade was auto-installed, firefox no longer will launch. clicking on the icon does nothing. can't start in safe mode
== This happened ==
Not sure how often
== firefox upgrade auto-installed ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; PPC Mac OS X 10_4_11; en) AppleWebKit/531.21.8 (KHTML, like Gecko) Version/4.0.4 Safari/531.21.10

You can try to disable the Java Quick starter and the Java Console extension in the Control Panel > Java.
Control Panel > Java > Advanced tab > Miscellaneous >Java Quick Starter (disable)
You can also disable the Java plugin in Firefox: Tools > Add-ons > Plugins
See [[Troubleshooting extensions and themes]]
See [[Troubleshooting plugins]]

"Verification is required" does nothing...

Similar Messages

Maybe you are looking for