Verification of steps to convert Single Node to RAC

Hi Forum
I have a single node Oracle E-Biz 12.1.3 Installation.
We plan to convert this to a dual node RAC install and I wanted to run by the steps to perform this AND clone over the current production system to the new RAC system
(note this will not be using ASM - but will be based on NetApp NFS)
1. Install GRID 11.2.0.3
- installed acorss two nodes, Binaries can be shared
- voting disks / cluster rigistry MUST be shared
2. Install Database Software for RAC
- Binaries cannot be shared and must be installed on each node independently
3. Configure the GRID for database (database / listeners)
4. Clone over the stand alone system (clone database as RAC)
I will be using SCAN - and therefore would expect all the web services / concurrent manager nodes to point to the SCAN hostname as opposed to individual host names,
Are there any decent technical notes out there that will help please?
Is there any HUGE miss I have made here
Thanks in anticipation

Hi,
I belive googling "single node to RAC" should give you a lot of articles and you can select any article based on your source database version and new version (11.2).
Since it is EBS database, probabl posting question on EBS forums will give you answer faster because you will find a lot of apps DBAs who would already have done this.
Salman

Similar Messages

Convert single instance in Rac

Hello experts, I have already configured a cluster database between two nodes with a RAC database named Cars. Also I have a single instance database named Persons in the first of the nodes. Now I need convert this single instance(Persons) in a Rac database, that is I want to have two RAC database(Cars and the new Persons).
Thank you very much in advance.

Oracle provides following methods to convert a single instance database to RAC:
Grid Control
DBCA
Manual
RCONFIG(from 10gR2)
refer this link:
http://www.oracle.com/technology/pub/articles/chan_sing2rac_install.html(manual method)
http://oracleinstance.blogspot.com/2009/12/convert-single-instance-to-rac-instance.html(rconfig method)
http://onlineappsdba.com/index.php/2009/06/24/single-instance-to-rac-conversion/(using dbca)
http://oracleinstance.blogspot.com/2010/07/converting-single-instance-to-rac.html(using dbca)
for converting your filesystem to asm use RMAN:
refer: for converting the non-asm files to asm files using the steps as shown in the link
http://oracleinstance.blogspot.com/2009/12/migrate-from-database-file-system-to.html
hope, this helps you.
Rajeshkumar Govindarajan,
Oracle DBA,
http://oracleinstance.blogspot.com

Migration from Single Node to RAC Node

Hi,
We are planning to migrate the Database from Single-Node to RAC Node. Are there any checklist list to be considered regarding Performance, System and Database ( or any other topic), before migrating to RAC.
Thanks

If it is already the same version, you will need to focus any "single-threadedness" of the application like sequences that are mandatory sequential, "semaphore-style" locking etc...
My experience is that going RAC and in particular to ASM can give a performance boost. If it is the same version (11gR2 for example) then any statistics-related performance issues will still be there.

Convert Single İnstance To RAC

Hii All
I making some test in order to convert single instance to RAC.In the scenario;
1.Crs Installed on machine.Asm disks created (Node1)
2.Oracle database software installed with rac option on Node1 .but only with binaries no database has been created.
3.An auixilary instance created in Node1.
4.On Standalone machine Database copied via Rman Clone Active database feature to node1 in asm
5.Cloned database is working correctly on node1 as Standalone
6.Run dbca on Node1 and select single instance,select create template from running database and template saved
7.Run dbca again on Node1.Select create rac enabled database, template selected as saved before.
Database created successfuly in crs environment but dbca creates fresh database no data has been preserved
This convert way is possible ? Where am I wrong ?Why dbca erase all data and create new database ?
Which do you advise to me to perfom convert scenario ?
Crs and Oracle 11gR2 on Centos.
Best Regards

Hi Eb;
What is db version? What is OS?
Please see below notes which could be helpful for your issue:
How To Convert A Single Instance Database To RAC In A Cluster File System Configuration [ID 208375.1]
How to Convert 10g Single-Instance database to 10g RAC using Manual Conversion procedure [ID 747457.1]
Regard
Helios

Converting single ASM to RAC ASM

How i can convert single ASM to RAC ASM?

ASM1 is the name of single and clustered names as ASM1 +ASM2, now what is suggestion? I can shutdown single instance ASM. If ASM Is up , it should not delet , right???

Error - convert single node-RAC-ConvertTomydb.xml -

my single node init.ora file:
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Cache and I/O
db_block_size=8192
db_file_multiblock_read_count=16
# Cursors and Library Cache
open_cursors=300
# Database Identification
db_domain=""
db_name=mydb
# Diagnostics and Statistics
background_dump_dest=/u01/app/oracle/admin/mydb/bdump
core_dump_dest=/u01/app/oracle/admin/mydb/cdump
user_dump_dest=/u01/app/oracle/admin/mydb/udump
# File Configuration
control_files=("/u01/app/oracle/oradata/mydb/control01.ctl", "/u01/app/oracle/oradata/mydb/control02.ctl", "/u01/app/oracle/oradata/mydb/control03.ctl")
# Job Queues
job_queue_processes=10
# Miscellaneous
compatible=10.2.0.1.0
# Processes and Sessions
processes=150
# SGA Memory
sga_target=1083179008
# Security and Auditing
audit_file_dest=/u01/app/oracle/admin/mydb/adump
remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=mydbXDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=360710144
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
my ConvertTomydb.xml ------------which is copy of ConvertToRAC.xml file
<?xml version="1.0" encoding="UTF-8" ?>
- <n:RConfig xmlns:n="http://www.oracle.com/rconfig" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.oracle.com/rconfig">
- <n:ConvertToRAC>
- 
- <n:Convert verify="ONLY">
- 
<n:SourceDBHome>/u01/app/oracle/product/10.2.0/db_1</n:SourceDBHome>
- 
<n:TargetDBHome>/u01/app/oracle/product/10.2.0/db_1</n:TargetDBHome>
- 
- <n:SourceDBInfo SID="mydb">
- <n:Credentials>
<n:User>sys</n:User>
<n:Password>oracle</n:Password>
<n:Role>sysdba</n:Role>
</n:Credentials>
</n:SourceDBInfo>
- 
- <n:ASMInfo SID="+ASM1">
- <n:Credentials>
<n:User>sys</n:User>
<n:Password>oracle</n:Password>
<n:Role>sysdba</n:Role>
</n:Credentials>
</n:ASMInfo>
- 
- <n:NodeList>
<n:Node name="linux1" />
<n:Node name="linux2" />
</n:NodeList>
- 
<n:InstancePrefix>mydb</n:InstancePrefix>
- 
<n:Listener port="1521" />
- 
- <n:SharedStorage type="ASM">
- 
<n:TargetDatabaseArea>+ORCL_DATA1</n:TargetDatabaseArea>
- 
<n:TargetFlashRecoveryArea>+FLASH_RECOVERY_AREA</n:TargetFlashRecoveryArea>
</n:SharedStorage>
</n:Convert>
</n:ConvertToRAC>
</n:RConfig>
Ran the xml file
$ rconfig ConvertTomydb.xml
Got this below error.
[oracle@linux1 bin]$ sh rconfig ConvertTomydb.xml
<?xml version="1.0" ?>
<RConfig>
<ConvertToRAC>
<Convert>
<Response>
<Result code="1" >
Operation Failed
</Result>
<ErrorDetails>
Clusterware is not configured
</ErrorDetails>
</Response>
</Convert>
</ConvertToRAC></RConfig>
[oracle@linux1 bin]$
Log file from /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/rconfig/rconfig.log
[main] [0:14:4:4] [RuntimeExec.runCommand:175] Returning from RunTimeExec.runCommand
oracle.ops.mgmt.cluster.RemoteShellException: PRKC-1044 : Failed to check remote command execution setup for node linux2 using shells /usr/bin/ssh and /usr/bin/rsh
linux2.com: Connection refused
     at oracle.ops.mgmt.nativesystem.UnixSystem.checkRemoteExecutionSetup(UnixSystem.java:1880)
     at oracle.ops.mgmt.nativesystem.UnixSystem.getRemoteShellCmd(UnixSystem.java:1634)
     at oracle.ops.mgmt.nativesystem.UnixSystem.createCommand(UnixSystem.java:614)
     at oracle.ops.mgmt.nativesystem.UnixSystem.removeFile(UnixSystem.java:622)
     at oracle.ops.mgmt.nativesystem.UnixSystem.isSharedPath(UnixSystem.java:1352)
     at oracle.ops.mgmt.cluster.Cluster.isSharedPath(Cluster.java:916)
     at oracle.ops.mgmt.cluster.Cluster.isSharedPath(Cluster.java:859)
     at oracle.sysman.assistants.util.ClusterUtils.areSharedPaths(ClusterUtils.java:570)
     at oracle.sysman.assistants.util.ClusterUtils.isShared(ClusterUtils.java:501)
     at oracle.sysman.assistants.util.ClusterUtils.isShared(ClusterUtils.java:457)
     at oracle.sysman.assistants.util.attributes.CommonOPSAttributes.updateShared(CommonOPSAttributes.java:724)
     at oracle.sysman.assistants.util.attributes.CommonOPSAttributes.setNodeNames(CommonOPSAttributes.java:207)
     at oracle.sysman.assistants.rconfig.engine.Context.<init>(Context.java:54)
     at oracle.sysman.assistants.rconfig.engine.ASMInstance.createUtilASMInstanceRAC(ASMInstance.java:109)
     at oracle.sysman.assistants.rconfig.engine.Step.execute(Step.java:245)
     at oracle.sysman.assistants.rconfig.engine.Request.execute(Request.java:73)
     at oracle.sysman.assistants.rconfig.engine.RConfigEngine.execute(RConfigEngine.java:65)
     at oracle.sysman.assistants.rconfig.RConfig.<init>(RConfig.java:85)
     at oracle.sysman.assistants.rconfig.RConfig.<init>(RConfig.java:51)
     at oracle.sysman.assistants.rconfig.RConfig.main(RConfig.java:130)
[main] [0:14:4:16] [UnixSystem.isSharedPath:1356] UnixSystem.isShared: creating file /u01/app/oracle/product/10.2.0/db_1/CFSFileName126249561289258204.tmp
[main] [0:14:4:17] [UnixSystem.checkRemoteExecutionSetup:1817] checkRemoteExecutionSetup:: Checking user equivalence using Secured Shell '/usr/bin/ssh'
[main] [0:14:4:17] [UnixSystem.checkRemoteExecutionSetup:1819] checkRemoteExecutionSetup:: Running Unix command: /usr/bin/ssh -o FallBackToRsh=no -o PasswordAuthentication=no -o StrictHostKeyChecking=yes -o NumberOfPasswordPrompts=0 linux2 /bin/true
oracle.ops.mgmt.cluster.SharedDeviceException: PRKC-1044 : Failed to check remote command execution setup for node linux2 using shells /usr/bin/ssh and /usr/bin/rsh
linux2.com: Connection refused
     at oracle.ops.mgmt.nativesystem.UnixSystem.testCFSFile(UnixSystem.java:1444)
     at oracle.ops.mgmt.nativesystem.UnixSystem.isSharedPath(UnixSystem.java:1402)
     at oracle.ops.mgmt.cluster.Cluster.isSharedPath(Cluster.java:916)
     at oracle.ops.mgmt.cluster.Cluster.isSharedPath(Cluster.java:859)
     at oracle.sysman.assistants.util.ClusterUtils.areSharedPaths(ClusterUtils.java:570)
     at oracle.sysman.assistants.util.ClusterUtils.isShared(ClusterUtils.java:501)
     at oracle.sysman.assistants.util.ClusterUtils.isShared(ClusterUtils.java:457)
     at oracle.sysman.assistants.util.attributes.CommonOPSAttributes.updateShared(CommonOPSAttributes.java:724)
     at oracle.sysman.assistants.util.attributes.CommonOPSAttributes.setNodeNames(CommonOPSAttributes.java:207)
     at oracle.sysman.assistants.rconfig.engine.Context.<init>(Context.java:54)
     at oracle.sysman.assistants.rconfig.engine.ASMInstance.createUtilASMInstanceRAC(ASMInstance.java:109)
     at oracle.sysman.assistants.rconfig.engine.Step.execute(Step.java:245)
     at oracle.sysman.assistants.rconfig.engine.Request.execute(Request.java:73)
     at oracle.sysman.assistants.rconfig.engine.RConfigEngine.execute(RConfigEngine.java:65)
     at oracle.sysman.assistants.rconfig.RConfig.<init>(RConfig.java:85)
     at oracle.sysman.assistants.rconfig.RConfig.<init>(RConfig.java:51)
     at oracle.sysman.assistants.rconfig.RConfig.main(RConfig.java:130)
[main] [0:14:35:152] [Version.isPre10i:189] isPre10i.java: Returning FALSE
[main] [0:14:35:152] [UnixSystem.getCSSConfigType:1985] configFile=/etc/oracle/ocr.loc
[main] [0:14:35:157] [Utils.getPropertyValue:221] keyName=ocrconfig_loc props.val=/u02/oradata/orcl/OCRFile propValue=/u02/oradata/orcl/OCRFile
[main] [0:14:35:157] [Utils.getPropertyValue:221] keyName=ocrmirrorconfig_loc props.val=/u02/oradata/orcl/OCRFile_mirror propValue=/u02/oradata/orcl/OCRFile_mirror
[main] [0:14:35:157] [Utils.getPropertyValue:292] propName=local_only propValue=FALSE
[main] [0:14:35:157] [UnixSystem.getCSSConfigType:2029] configType=false
[main] [0:14:35:158] [Version.isPre10i:189] isPre10i.java: Returning FALSE
[main] [0:14:35:168] [OCRTree.init:201] calling OCRTree.init
[main] [0:14:35:169] [Version.isPre10i:189] isPre10i.java: Returning FALSE
[main] [0:14:35:177] [OCRTree.<init>:157] calling OCR.init at level 7
[main] [0:14:35:177] [HASContext.getInstance:190] Module init : 24
[main] [0:14:35:177] [HASContext.getInstance:214] Local Module init : 0
[main] [0:14:35:177] [HASContext.getInstance:249] HAS Context Allocated: 4 to oracle.ops.mgmt.has.ClusterLock@f47bf5
[main] [0:14:35:177] [ClusterLock.<init>:60] ClusterLock Instance created.
[main] [0:14:35:178] [OCR.getKeyValue:411] OCR.getKeyValue(SYSTEM.local_only)
[main] [0:14:35:178] [nativesystem.OCRNative.Native] getKeyValue: procr_open_key retval = 0
[main] [0:14:35:179] [nativesystem.OCRNative.Native] getKeyValue: procr_get_value retval = 0, size = 6
[main] [0:14:35:179] [nativesystem.OCRNative.Native] getKeyValue: value is [false] dtype = 3
[main] [0:14:35:179] [OCRTreeHA.getLocalOnlyKeyValue:1697] OCRTreeHA localOnly string = false
[main] [0:14:35:180] [HASContext.getInstance:190] Module init : 6
[main] [0:14:35:180] [HASContext.getInstance:214] Local Module init : 0
[main] [0:14:35:180] [HASContext.getInstance:249] HAS Context Allocated: 5 to oracle.ops.mgmt.has.Util@f6438d
[main] [0:14:35:180] [Util.<init>:86] Util Instance created.
[main] [0:14:35:180] [has.UtilNative.Native] prsr_trace: Native: hasHAPrivilege
[main] [0:14:35:184] [HASContext.getInstance:190] Module init : 56
[main] [0:14:35:184] [HASContext.getInstance:214] Local Module init : 32
[main] [0:14:35:184] [has.HASContextNative.Native] prsr_trace: Native: allocHASContext
[main] [0:14:35:184] [has.HASContextNative.Native]
allocHASContext: Came in
[main] [0:14:35:184] [has.HASContextNative.Native] prsr_trace: Native: prsr_initCLSR
[main] [0:14:35:185] [has.HASContextNative.Native]
allocHASContext: CLSR context [1]
[main] [0:14:35:185] [has.HASContextNative.Native]
allocHASContext: retval [1]
[main] [0:14:35:185] [HASContext.getInstance:249] HAS Context Allocated: 6 to oracle.ops.mgmt.has.ClusterAlias@18825b3
[main] [0:14:35:185] [ClusterAlias.<init>:85] ClusterAlias Instance created.
[main] [0:14:35:185] [has.UtilNative.Native] prsr_trace: Native: getCRSHome
[main] [0:14:35:186] [has.UtilNative.Native] prsr_trace: Native: getCRSHome crs_home=/u01/app/oracle/product/10.2.0/crs(**)
[main] [0:14:35:280] [ASMTree.getASMInstanceOracleHome:1328] DATABASE.ASM.linux1.+asm1 does exist
[main] [0:14:35:280] [ASMTree.getASMInstanceOracleHome:1329] Acquiring shared CSS lock SRVM.ASM.DATABASE.ASM.linux1.+asm1
[main] [0:14:35:280] [has.ClusterLockNative.Native] prsr_trace: Native: acquireShared
[main] [0:14:35:281] [OCR.getKeyValue:411] OCR.getKeyValue(DATABASE.ASM.linux1.+asm1.ORACLE_HOME)
[main] [0:14:35:281] [nativesystem.OCRNative.Native] getKeyValue: procr_open_key retval = 0
[main] [0:14:35:282] [nativesystem.OCRNative.Native] getKeyValue: procr_get_value retval = 0, size = 36
[main] [0:14:35:282] [nativesystem.OCRNative.Native] getKeyValue: value is [u01/app/oracle/product/10.2.0/db_1] dtype = 3
[main] [0:14:35:282] [ASMTree.getASMInstanceOracleHome:1346] getASMInstanceOracleHome:ohome=/u01/app/oracle/product/10.2.0/db_1
[main] [0:14:35:282] [ASMTree.getASMInstanceOracleHome:1367] Releasing shared CSS lock SRVM.ASM.DATABASE.ASM.linux1.+asm1
[main] [0:14:35:282] [has.ClusterLockNative.Native] prsr_trace: Native: unlock
[main] [0:14:35:802] [nativesystem.OCRNative.Native] keyExists: procr_close_key retval = 0
[main] [0:14:35:802] [ASMTree.getNodes:1236] DATABASE.ASM does exist
[main] [0:14:35:802] [ASMTree.getNodes:1237] Acquiring shared CSS lock SRVM.ASM.DATABASE.ASM
[main] [0:14:35:802] [has.ClusterLockNative.Native] prsr_trace: Native: acquireShared
[main] [0:14:35:803] [OCR.listSubKeys:615] OCR.listSubKeys(DATABASE.ASM)
[main] [0:14:35:803] [nativesystem.OCRNative.Native] listSubKeys: key_name=[DATABASE.ASM]
[main] [0:14:35:809] [GetASMNodeListOperation.run:78] Got nodes=[Ljava.lang.String;@11a75a2
[main] [0:14:35:809] [GetASMNodeListOperation.run:91] result status 0
[main] [0:14:35:809] [LocalCommand.execute:56] LocalCommand.execute: Returned from run method
[main] [0:14:35:810] [ASMInstanceRAC.loadDiskGroups:2260] diskgroup: instName=+ASM2, diskGroupName=FLASH_RECOVERY_AREA, size=95378, freeSize=88454, type=EXTERN, state=MOUNTED
[main] [0:14:35:811] [ASMInstanceRAC.loadDiskGroups:2260] diskgroup: instName=+ASM1, diskGroupName=FLASH_RECOVERY_AREA, size=95378, freeSize=88454, type=EXTERN, state=MOUNTED
[main] [0:14:35:811] [ASMInstanceRAC.loadDiskGroups:2260] diskgroup: instName=+ASM2, diskGroupName=ORCL_DATA1, size=95384, freeSize=39480, type=NORMAL, state=MOUNTED
[main] [0:14:35:811] [ASMInstanceRAC.loadDiskGroups:2260] diskgroup: instName=+ASM1, diskGroupName=ORCL_DATA1, size=95384, freeSize=39480, type=NORMAL, state=MOUNTED
[main] [0:14:35:858] [ASMInstance.setBestDiskGroup:1422] sql to be executed:=select name from v$asm_diskgroup where free_mb= (select max(free_mb) from v$asm_diskgroup)
[main] [0:14:35:864] [ASMInstance.setBestDiskGroup:1426] Setting best diskgroup....
[main] [0:14:35:888] [SQLEngine.doSQLSubstitution:2165] The substituted sql statement:=select t1.name from v$asm_template t1, v$asm_diskgroup t2 where t1.group_number=t2.group_number and t2.name='FLASH_RECOVERY_AREA'
[main] [0:14:35:888] [ASMInstance.setTemplates:1345] sql to be executed:=select t1.name from v$asm_template t1, v$asm_diskgroup t2 where t1.group_number=t2.group_number and t2.name='FLASH_RECOVERY_AREA'
[main] [0:14:35:892] [ASMInstance.setTemplates:1349] Getting templates for diskgroup: oracle.sysman.assistants.util.asm.DiskGroup@170888e
[main] [0:14:35:892] [ASMInstance.setTemplates:1357] template: PARAMETERFILE
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: DUMPSET
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: DATAGUARDCONFIG
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: FLASHBACK
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: CHANGETRACKING
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: XTRANSPORT
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: AUTOBACKUP
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: BACKUPSET
[main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: TEMPFILE
[main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: DATAFILE
[main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: ONLINELOG
[main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: ARCHIVELOG
[main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: CONTROLFILE
[main] [0:14:35:894] [ASMInstance.createUtilASMInstanceRAC:113] Diskgroups loaded
[main] [0:14:35:894] [LocalNodeCheck.checkLocalNode:107] Performing LocalNodeCheck
[main] [0:14:35:894] [OracleHome.getNodeNames:270] inside getNodeNames
[main] [0:14:36:116] [OracleHome.isClusterInstalled:252] bClusterInstalled=false
[main] [0:14:36:120] [Step.execute:251] STEP Result=Clusterware is not configured
[main] [0:14:36:121] [Step.execute:280] Returning result:Operation Failed
[main] [0:14:36:121] [RConfigEngine.execute:67] bAsyncJob=false
[main] [0:14:36:124] [RConfigEngine.execute:76] Result=<?xml version="1.0" ?>
<RConfig>
<ConvertToRAC>
<Convert>
<Response>
<Result code="1" >
Operation Failed
</Result>
<ErrorDetails>
Clusterware is not configured
</ErrorDetails>
</Response>
</Convert>
</ConvertToRAC></RConfig>
Log file from /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/rconfig/mydb/sqllog
MYDB     mydb                    2622254467
10.2.0.1.0     ACTIVE
cluster_database                                        FALSE
undo_management                                         AUTO
db_domain
dispatchers                                             (PROTOCOL=TCP) (SERVICE=mydbXDB)
background_dump_dest                                        /u01/app/oracle/admin/mydb/bdump
user_dump_dest                                             /u01/app/oracle/admin/mydb/udump
core_dump_dest                                             /u01/app/oracle/admin/mydb/cdump
audit_file_dest                                         /u01/app/oracle/admin/mydb/adump
MYDB     mydb                    2622254467
10.2.0.1.0     ACTIVE
cluster_database                                        FALSE
undo_management                                         AUTO
db_domain
dispatchers                                             (PROTOCOL=TCP) (SERVICE=mydbXDB)
background_dump_dest                                        /u01/app/oracle/admin/mydb/bdump
user_dump_dest                                             /u01/app/oracle/admin/mydb/udump
core_dump_dest                                             /u01/app/oracle/admin/mydb/cdump
audit_file_dest                                         /u01/app/oracle/admin/mydb/adump
MYDB     mydb                    2622254467
10.2.0.1.0     ACTIVE
cluster_database                                        TRUE
undo_management                                         AUTO
db_domain
dispatchers                                             (PROTOCOL=TCP) (SERVICE=mydbXDB)
background_dump_dest                                        /u01/app/oracle/admin/mydb/bdump
user_dump_dest                                             /u01/app/oracle/admin/mydb/udump
core_dump_dest                                             /u01/app/oracle/admin/mydb/cdump
audit_file_dest                                         /u01/app/oracle/admin/mydb/adump
MYDB     mydb                    2622254467
10.2.0.1.0     ACTIVE
cluster_database                                        TRUE
undo_management                                         AUTO
db_domain
dispatchers                                             (PROTOCOL=TCP) (SERVICE=mydbXDB)
background_dump_dest                                        /u01/app/oracle/admin/mydb/bdump
user_dump_dest                                             /u01/app/oracle/admin/mydb/udump
core_dump_dest                                             /u01/app/oracle/admin/mydb/cdump
audit_file_dest                                         /u01/app/oracle/admin/mydb/adump
MYDB     mydb                    2622254467
10.2.0.1.0     ACTIVE
cluster_database                                        TRUE
undo_management                                         AUTO
db_domain
dispatchers                                             (PROTOCOL=TCP) (SERVICE=mydbXDB)
background_dump_dest                                        /u01/app/oracle/admin/mydb/bdump
user_dump_dest                                             /u01/app/oracle/admin/mydb/udump
core_dump_dest                                             /u01/app/oracle/admin/mydb/cdump
audit_file_dest                                         /u01/app/oracle/admin/mydb/adump
Please help me where I am making mistake.
Thanks

1) I have created single node standard database called mydb in /u01/app/oracle/product/10.2.0/db_1 home (hostname linux1)
2) installed crs and asm on linux1 and linux2 and shared storag on ASM(which external HD running ieee1294 cards and ports) . no database is created on linux1 or linux2
3) I want to convert mydb to RAC DATABASE called mydb1 instance on linux1 and mydb2 on linux2 machine respectively.
4) copied and modifed xml as you see above called ConvertTomydb.xml to $ORACLE_HOME/bin directory
5) when I run
$rconfig ConvertTomydb.xml from $ORACLE_HOME/bin directory , i get the following error
<ConvertToRAC>
<Convert>
<Response>
<Result code="1" >
Operation Failed
</Result>
<ErrorDetails>
Clusterware is not configured
</ErrorDetails>
</Response>
</Convert>
</ConvertToRAC>
$
Please see my crs_stat -t command output
Name Type Target State Host
ora....SM1.asm application ONLINE ONLINE linux1
ora....X1.lsnr application ONLINE ONLINE linux1
ora.linux1.gsd application ONLINE ONLINE linux1
ora.linux1.ons application ONLINE ONLINE linux1
ora.linux1.vip application ONLINE ONLINE linux1
ora....SM2.asm application ONLINE ONLINE linux2
ora....X2.lsnr application ONLINE ONLINE linux2
ora.linux2.gsd application ONLINE ONLINE linux2
ora.linux2.ons application ONLINE ONLINE linux2
ora.linux2.vip application ONLINE ONLINE linux2
ora.orcl.db application ONLINE ONLINE linux1
ora....l1.inst application ONLINE ONLINE linux1
ora....l2.inst application ONLINE ONLINE linux2
ora....test.cs application ONLINE ONLINE linux1
ora....cl1.srv application ONLINE ONLINE linux1
ora....cl2.srv application ONLINE UNKNOWN linux2
please see the output from olsnodes command
[oracle@linux1 bin]$ olsnodes
linux1
linux2
[oracle@linux1 bin]$
What is your cache fusion interconnect strategy?
I don't about this, please let me know where can i find the answers. what kind of command do i have to use get the answer
damorgan , Please let me know, if I gave answers to your questions. if not please let me know, i can give as much as possible. i really appreciate for your help
Thanks

Convert 11.1.0.7 EBS 12.1.3 single node to RAC with ASM on 11.2.0.3 cluster

Hi
I am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit
I am following Oracle metalink document note id 466649.1 . My 11.2.0.3 clusterware is already setup correctly and working fine as per document E24614-03.
However I am currently stuck in section 3.3:Configure TNS listener (Doc id : 466649.1) . The netca is unable to start the listener and failing with error as below.
However when I start the same locally from lsnrctl command listener starts.
trace_OraDb11g_home1-1212159AM174.log
====================================
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:144] runCommand: process returns 123
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:161] RunTimeExec: output>
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
`jxn-ux-ebs1d1q` failed.
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr`
on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
`jxn-ux-ebs1d1q` succeeded.
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] CRS-2632: There are no more servers to try to place resource 'ora.jxn-ux-e
bs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:170] RunTimeExec: error>
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173] CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr'
has placement error.
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173]
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
[AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1221] signed exit value = 123
[AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1258] set status HA_RES_RELOCATE_ERR
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:84] Returned from executing the HA Operation
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q
.lsnr` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on m
ember `jxn-ux-ebs1d1q` failed.
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.
lsnr` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on me
mber `jxn-ux-ebs1d1q` succeeded.
[AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> CRS-2632: There are no more servers to try to place resource 'ora.jxn
-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
[AWT-EventQueue-0] [18:34:31:893] [HAStartOperation.run:95] ERROR> CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.l
snr' has placement error.
[AWT-EventQueue-0] [18:34:31:893] [LocalCommand.execute:56] LocalCommand.execute: Returned from run method
[AWT-EventQueue-0] [18:34:31:893] [HAOperationResult.getOutputAll:114] outLine is [CRS-2632: There are no more servers to try to place re
source 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy]
[AWT-EventQueue-0] [18:34:31:894] [HAOperationResult.getOutputAll:115] errLine is [CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_
JXN-UX-EBS1D1Q.lsnr' has placement error.]
[AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getNodeNameIndex:-1] getNodeNameIndex: Matching LISTENER_EBSQA_JXN-UX-EBS1D1Q
[AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getListenerRootName:-1] ListenerName is LISTENER_EBSQA
The crsctl has details as below:
=====================
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.LISTENER_SCAN1.lsnr
1 ONLINE ONLINE jxn-ux-ebs2d1q
ora.LISTENER_SCAN2.lsnr
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.LISTENER_SCAN3.lsnr
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.cvu
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
1 ONLINE OFFLINE
ora.jxn-ux-ebs1d1q.vip
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.jxn-ux-ebs2d1q.LISTENER_EBSQA_JXN-UX-EBS2D1Q.lsnr
1 ONLINE OFFLINE
Not sure how to fix this .
Regards
Ram

I am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit You don't need to create listeners, after installing 11203 cluster there will be LISTENER running from $GRID_HOME
along with SCAN_LISTENERS

Convert single node Multi Node

We have one requirement, our single node is running on sun server ( 11.5.10.2 with 9.2.0.7)
we want to convert the single node to 2 node, like this
Node 1 = DB + CM + ADMIN
Node 2 = FORMS, WEB
I want to follow the following procedure
(a) Copy the Total Application Tier File system from single node to Node 2
(b) Run the config clone on Node 1 and specify to run the services CM and ADMIN only on this node
(c) Run the config clone on Node 2 and specify to run Forms, web services only on this node 2
is the above procedure correct?

Node 1 = DB + CM + ADMIN
Node 2 = FORMS, WEB
I want to follow the following procedure
(a) Copy the Total Application Tier File system from single node to Node 2
(b) Run the config clone on Node 1 and specify to run the services CM and ADMIN only on this node
(c) Run the config clone on Node 2 and specify to run Forms, web services only on this node 2It is correct.

Oracle 11gR2 RAC (convert single instance to RAC)

Hi,
Using Metalink Doc [ID 747457.1] I have converted single instance database running on 11gR2 to RAC (2 node) database 11gR2 with ASM. Its running fine, I am able to see the instances running on both nodes. But I am unable to login to the instance. It is connecting to ideal instance., but the instance is already running
oracle@hublhp1:/home/oracle$ export ORACLE_SID=cadtest1
oracle@hublhp1:/home/oracle$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Tue Nov 2 11:23:43 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL>
oracle@hublhp1:/home/oracle$ srvctl status database -d cadtest
Instance cadtest1 is not running on node hublhp1
Instance cadtest2 is not running on node hublhp3
oracle@hublhp1:/home/oracle$ ps -ef | grep pmon
oracle 2407 1 0 15:28:21 ? 0:27 asm_pmon_+ASM1
oracle 4125 1 0 15:51:18 ? 0:36 ora_pmon_cadtest1
oracle 4973 3295 0 14:31:13 pts/1 0:00 grep pmon
oracle@hublhp1:/home/oracle$
I am able to stop/start the database using SRVCTL but I am not able to login to this instance. Can anyone please help me to find the issue or where & what to look at.
- Mano

Thank you so much, I did the following, but I still have the same issue, the instance is running on both nodes, but I am unable to stop/start the database using SRVCTL and I am unable to login using SQLPLUS.
oracle@hublhp1:/home/oracle$ *srvctl modify database -d cadtest -n cadtest -o $ORACLE_HOME -p +asmcdb01/cadtest/spfilecadtest.ora -a ASMCDB01,ASMCFR01*
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$ srvctl config database -d cadtest -a
Database unique name: cadtest
Database name: cadtest
Oracle home: /app/oracle/rdbms/product/11.2.0
Oracle user: oracle
Spfile: +asmcdb01/cadtest/spfilecadtest.ora
Domain:
Start options: open
Stop options: immediate
Database role: PRIMARY
Management policy: AUTOMATIC
Server pools: cadtest
Database instances: cadtest1,cadtest2
Disk Groups: ASMCDB01,ASMCFR01
Services:
Database is enabled
Database is administrator managed
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$ srvctl stop database -d cadtest
PRCC-1016 : cadtest was already stopped
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$ srvctl status database -d cadtest
Instance cadtest1 is not running on node hublhp1
Instance cadtest2 is not running on node hublhp3
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$ echo $ORACLE_SID
cadtest1
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Tue Nov 2 15:31:55 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> exit
Disconnected
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$
oracle@hublhp1:/home/oracle$

Convert single instance to rac on 11gr2

Hi,
I have 11gr2 database single instance running with ASM storage attached. i want to convert it into RAC on same server.
Can I take RMAN backup and restore in RAC ORACLE_HOME ? or do I need to go with rconfig or other steps?
Please let me know if have any good doc.
thanks

here is detail:
DB server =db1
installed oracle binary for non-RAC-oracle 11gr2.
installed oracle binary for rac-oracle and grid V 11gr2
dATABASE is running in non-rac oracle with ASM. I want to convert from Oracle single instance to RAC instance on same server on Linux RHEL5.4 platform.
Thanks

How to change from single Node to RAC for AIA

Recently I have installed AIA 11.1.1.5, but during installation I selected single node. But now I would like to configure it to use RAC. How to do it? Reinstalling is not an option.

Hi,
Hope this helps
http://proskudin.blogspot.com/2007/06/two-level-tabs.html
Br,Jari

Moving RAC/ASM to single-node non-rac SET NEWNAME not working

Good morning,
I'm trying to restore a rac/asm database to a non-rac environment to simulate disaster recovery under worst-case circumstances.
Here is as faras I have been able to get
1) Restored pfile
2) modified pfile to remove references to RAC settings (note, did not set db_file_create_dest, db_file_name_convert, etc)
3) Restored controlfile successfully
4) Mounted database
At this time I run the following rman script which covers all temp and datafiles (there's some skipped numbers where datafiles have been removed previously)
run {
set until time "to_date('2009/11/29 03:00:00','YYYY/MM/DD HH24:MI:SS')";
set newname for tempfile 1 to '/mnt/data/oradata/pmi/temp_1.dbf';
set newname for datafile 1 to '/mnt/data/oradata/pmi/system_1.dbf';
set newname for datafile 2 to '/mnt/data/oradata/pmi/undotbs1_2.dbf';
set newname for datafile 3 to '/mnt/data/oradata/pmi/sysaux_3.dbf';
set newname for datafile 4 to '/mnt/data/oradata/pmi/undotbs2_4.dbf';
set newname for datafile 5 to '/mnt/data/oradata/pmi/undotbs3_5.dbf';
set newname for datafile 6 to '/mnt/data/oradata/pmi/users_6.dbf';
set newname for datafile 7 to '/mnt/data/oradata/pmi/atend1_7.dbf';
set newname for datafile 8 to '/mnt/data/oradata/pmi/atendidx1_8.dbf';
set newname for datafile 9 to '/mnt/data/oradata/pmi/cwmlite_9.dbf';
set newname for datafile 10 to '/mnt/data/oradata/pmi/datafeedsidx1_10.dbf';
set newname for datafile 11 to '/mnt/data/oradata/pmi/drsys_11.dbf';
set newname for datafile 12 to '/mnt/data/oradata/pmi/dynamic1_12.dbf';
set newname for datafile 13 to '/mnt/data/oradata/pmi/dynamicidx1_13.dbf';
set newname for datafile 14 to '/mnt/data/oradata/pmi/intermedia_14.dbf';
set newname for datafile 15 to '/mnt/data/oradata/pmi/notesidx1_15.dbf';
set newname for datafile 16 to '/mnt/data/oradata/pmi/odm_16.dbf';
set newname for datafile 18 to '/mnt/data/oradata/pmi/pacific_data_large_18.dbf';
set newname for datafile 19 to '/mnt/data/oradata/pmi/pacific_data_medium_19.dbf';
set newname for datafile 20 to '/mnt/data/oradata/pmi/pacific_data_small_20.dbf';
set newname for datafile 21 to '/mnt/data/oradata/pmi/pacific_data_xlarge_21.dbf';
set newname for datafile 22 to '/mnt/data/oradata/pmi/pacific_index_large_22.dbf';
set newname for datafile 23 to '/mnt/data/oradata/pmi/pacific_index_medium_23.dbf';
set newname for datafile 24 to '/mnt/data/oradata/pmi/pacific_index_small_24.dbf';
set newname for datafile 25 to '/mnt/data/oradata/pmi/pacific_index_xlarge_25.dbf';
set newname for datafile 26 to '/mnt/data/oradata/pmi/pmi_data_large_26.dbf';
set newname for datafile 27 to '/mnt/data/oradata/pmi/pmi_data_medium_27.dbf';
set newname for datafile 28 to '/mnt/data/oradata/pmi/pmi_data_small_28.dbf';
set newname for datafile 29 to '/mnt/data/oradata/pmi/pmi_data_large_29.dbf';
set newname for datafile 30 to '/mnt/data/oradata/pmi/sysaux_30.dbf';
set newname for datafile 31 to '/mnt/data/oradata/pmi/pmi_data_xlarge_31.dbf';
set newname for datafile 32 to '/mnt/data/oradata/pmi/pmi_index_large_32.dbf';
set newname for datafile 33 to '/mnt/data/oradata/pmi/pmi_data_medium_33.dbf';
set newname for datafile 34 to '/mnt/data/oradata/pmi/pmi_index_medium_34.dbf';
set newname for datafile 35 to '/mnt/data/oradata/pmi/pmi_index_small_35.dbf';
set newname for datafile 36 to '/mnt/data/oradata/pmi/pmi_index_xlarge_36.dbf';
set newname for datafile 38 to '/mnt/data/oradata/pmi/portal30_38.dbf';
set newname for datafile 39 to '/mnt/data/oradata/pmi/portal_app_helpdesk_39.dbf';
set newname for datafile 40 to '/mnt/data/oradata/pmi/static1_40.dbf';
set newname for datafile 41 to '/mnt/data/oradata/pmi/staticidx1_41.dbf';
set newname for datafile 42 to '/mnt/data/oradata/pmi/tools_42.dbf';
set newname for datafile 43 to '/mnt/data/oradata/pmi/xdb_43.dbf';
set newname for datafile 44 to '/mnt/data/oradata/pmi/pmi_index_small_44.dbf';
set newname for datafile 46 to '/mnt/data/oradata/pmi/pmi_index_medium_46.dbf';
set newname for datafile 47 to '/mnt/data/oradata/pmi/pmi_data_small_47.dbf';
set newname for datafile 48 to '/mnt/data/oradata/pmi/pmi_index_large_48.dbf';
set newname for datafile 49 to '/mnt/data/oradata/pmi/pmi_index_xlarge_49.dbf';
set newname for datafile 50 to '/mnt/data/oradata/pmi/system_50.dbf';
set newname for datafile 52 to '/mnt/data/oradata/pmi/pmi_data_xlarge_52.dbf';
set newname for datafile 54 to '/mnt/data/oradata/pmi/pmi_index_medium_54.dbf';
set newname for datafile 55 to '/mnt/data/oradata/pmi/acctdb_data_55.dbf';
set newname for datafile 56 to '/mnt/data/oradata/pmi/acctdb_index_56.dbf';
set newname for datafile 57 to '/mnt/data/oradata/pmi/pivot_data_57.dbf';
set newname for datafile 58 to '/mnt/data/oradata/pmi/pmiaudit_data_58.dbf';
set newname for datafile 59 to '/mnt/data/oradata/pmi/pmiaudit_indx_59.dbf';
allocate channel D1 device type disk;
restore database;
switch datafile all;
release channel D1;
When I run this I get the following:
creating datafile fno=3 name=/mnt/data/oradata/pmi/sysaux_3.dbf
released channel: D1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/09/2009 09:32:33
ORA-01119: error in creating database file '+PMI2'
ORA-17502: ksfdcre:4 Failed to create file +PMI2
ORA-15001: diskgroup "PMI2" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
I noticed that it's trying to create the datafile. Shouldn't it be giving me a "Restoring datafiles from backup piece" clause? Also it appears to be trying to recreate the datafiles in their old location. Any thoughts on how to get around this.
Using the db_file_name_convert does allow me to restore files to the filesystem, but they use names such as "omf_*" and I'm not sure if it's converting the files properly from ASM format.
Thanks!

Hi,
I assume your problem is either in your pfile ( but you indicate you have removed all RAC settings), or in your control file.
I would recommend to remove the control files and create them later as soon as the datafiles have been restored, using the commands:
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "OMST01" NORESETLOGS FORCE LOGGING NOARCHIVELOG
-- SET STANDBY TO MAXIMIZE PERFORMANCE
MAXLOGFILES 100
MAXLOGMEMBERS 2
MAXDATAFILES 1024
MAXINSTANCES 8
MAXLOGHISTORY 10210
LOGFILE
< your logfiles >
DATAFILE
< your datafiles >
CHARACTER SET <your character set>;So the steps are
Startup nomount with the pfile
Restore the datafiles using rman
Shutdown the database
Use above script to create the control files
It is possible you need to use the RESETLOGS option instead of the NORESETLOGS
HTH

Single node to RAC migration

Hello friends ,
I am using RAC 11g(11.1.0.7)I having below configurations
NODE1
Clusterware oracle home /u01/Oracle_home1
ASM oracle home /u02/Oracle_home2
RAC oracle home /u03/Oracle_home3
NODE2
Clusterware oracle home /u01/Oracle_home1
ASM oracle home /u02/Oracle_home2
RAC oracle home /u03/Oracle_home3
Now I have one another database(NON RACed & NON ASM) with SID TEST which on local disk with flat file system on NODE1 only i.e /p01/Oracle_home4
My question is using RMAN can I restore rman backup piece or active database duplication of this local database to RAC system defined above.
Regards
Saransh Soni

Clone the single instance database from FileSystem to ASM using RMAN. At this point it is still single instance.
Unfortunately, the documentation convers FileSystem to ASM on the same server.
http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmasmmi.htm#CHDCDCFJ
So, see the DUPLICATION Example "Example 23-6 Duplicating from a File System to ASM (Active)"
http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmdupdb.htm#BGBEHADD
Then convert to RAC
http://download.oracle.com/docs/cd/B28359_01/rac.111/b28254/adddelunix.htm#CEGJFBJA
Hemant K Chitale

Error starting listener on single node in RAC..Error listening on: (DESCRIP

LSNRCTL> start LISTENER_CORPNG04
Starting /ora00/app/oracle/product/11/db1/bin/tnslsnr: please wait...
TNSLSNR for HPUX: Version 11.1.0.7.0 - Production
System parameter file is /ora00/app/oracle/product/11/db1/network/admin/listener.ora
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=vir_corpng04)(PORT=1521)(IP=FIRST)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
HPUX Error: 227: Can't assign requested address
Listener failed to start. See the error message(s) above...
LSNRCTL>
Plz help its production system
Thanks in Advance
Gagan

Hello,s
First of all, check the status of all resources by using crs_stat -t
Check if your VIP resource is indeed up and running on the node where you want to start the listener. As listener is depending upon this VIP address, it is needed to be up on the node where listener is configured. If this is the case then relocate the vip back to the system by using either of the following commands
1. crs_relocate <vip_resource_name>
OR
2. srvctl start nodeapps -n <hostname>
listener should be automatically up once crs relocates back the vip to the system.
If vip is already running fine on the system then check for your listener configuration as you check in normal systems.
Lalit Verma
[http://sites.google.com/site/racinsights1]

Concurrent program required on a single node with RAC connfiguration

Hai all,
RAC with 11.5.10.2 on Linux . 2 DB server with 2 app server with concurrent managers
running on only one node..
We have requirement to run a concurrent program and its child process to run on only one
node of the RAC DB. Since this is not possible in this version and possible with 12.1 as per the note
Method Of Always Running A Specific Concurrent Program On One Particular Node [ID 1070621.1] .
We created a concurrent manager and under Specialization rules, we added all the program that
we required. now in the concurrent manager -define form - under the primary and secondary node
- do I have to set the node as one of the database server (or) one of the apps server.
RAC Configuration Setup For Running MRP Planning, APS Planning, and Data Collection Processes [ID 279156.1]
Please advise.

We created a concurrent manager and under Specialization rules, we added all the program that
we required. now in the concurrent manager -define form - under the primary and secondary node
- do I have to set the node as one of the database server (or) one of the apps server.
RAC Configuration Setup For Running MRP Planning, APS Planning, and Data Collection Processes [ID 279156.1]
Please advise.You only need to set the name of the node where the CM is running (under "Primary Node").
If you have PCP implemented, then you can type the name of each node where CM is running (CM node1 and CM node2).
Thanks,
Hussein

Verification of steps to convert Single Node to RAC

Similar Messages

Maybe you are looking for