Verifier and method transactions
Test Name : tests.ejb.ContainerTransactionStyle3
Test Assertion : The container transaction method must be one defined in the remote or home interface of the specified enterprise bean test
Test Description : For [ module_forum_jar#forum_jar#Sequence ]
Error: Container Transaction method name [ remove ] not defined in [ Home ] or [ Component ] interface.
Tre transaction is defined in the ejb-jar.xml for this method... but remove it is not on the home interfaces as the spec say.
Why this error???
I have not seen this problem. METHOD_ENTRY and EXIT events are posted from the same java thread which entered method
and exited method. So you should see ENTRY first and EXIT next. If you have java program which shows this behavior post
it here.
Similar Messages
-
Session method and call transaction methos which one is the sap recomonded
hi
PLease give me the answer to these questions.
session method and call transaction methos which one is the sap recomonded why .
2) if we want to maintain BDC program in all the systems.wt to d0Hi Revethi,
Here is the difference between the Session and Call Transaction method.
Session
Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ... bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
Syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E> update <L/A/S>
messages into BDCMSGCOLL. -
Error while updating data using session and call transaction method
Hi all,
i have to update data using MM01 transaction from flat file to database.i have used both session method and call transaction method to do that.in both the methods data has been transferred from internal tables to screens but while updating the data that is by clicking the ok-code at the end of the transaction iam getting a dialogue box stating
SAP EXPRESS DOCUMENT "UPDATE WAS TERMINATED" RECEIVED FROM AUTHOR "SAP".
please tell whether the problem lies and solution for that.
thanks and regards.hi,
check your recording.check whether u saved your material no in recording or not.
once again record the transacton mm01.
MATNR LIKE RMMG1-MATNR,
MBRSH LIKE RMMG1-MBRSH,
MTART LIKE RMMG1-MTART,
MAKTX LIKE MAKT-MAKTX,
MEINS LIKE MARA-MEINS,
MATKL LIKE MARA-MATKL,
BISMT LIKE MARA-BISMT,
EXTWG LIKE MARA-EXTWG,
these are the fields which u have to take in internal table.
this is the record which i took in my flatfile.use filetype as asc and hasfieldseperator as 'X'.
SUDHU-6 R ROH MATSUDHU " 001 7890 AA
i did the same.but i didn't get any error. -
Log file in session and call transaction methods
Hi Experts,
How to see log file in session and call transaction methods?hi
If its a session then goto SM35, select ur session and then u can see log button over there at the top... that will give the log
If its a call transaction then in ur program u need to declare internal table IT_MSGS like this
DATA: IT_MSGS LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
LOOP AT IT_SALES.
PERFORM POPULATE_BDC.
CALL TRANSACTION 'VA01' USING IT_BDCDATA
MODE MODE
UPDATE UPDATE
MESSAGES INTO IT_MSGS.
IF NOT IT_MSGS[] IS INITIAL.
LOOP AT IT_MSGS.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = IT_MSGS-MSGID
LANG = 'EN'
NO = IT_MSGS-MSGNR
V1 = IT_MSGS-MSGV1
V2 = IT_MSGS-MSGV2
V3 = IT_MSGS-MSGV3
V4 = IT_MSGS-MSGV4
IMPORTING
MSG = V_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE:/ V_MSG.
ENDLOOP.
ENDIF.
ENDLOOP.
This will create a log for you, dont forget to award points if found helpful -
Mappimg and updation in bdc 'session ' and 'call transaction' methods
What will happen if error record comes while updating in session method and call transaction method.
Hi,
If any error comes in Session method U can find that error in SM35->Log
and updste again database for those enteries
In cll transaction Method U have to handel error manually . for this u have to use structure BDCMSGCOL and Table T100.
Regards
Gaurav -
I have being trying to purchase movies and tv shows on apple tv. i keep getting verify purchase method in itunes. i do and i can purchase things from my computer and iphone but apple tv wont let me how do i get this to change!!! i have changed my password restarted, apple tv and deleted and re entered my payment info! please help...
Look for a None option in the Payment Methods;
If you do not have one you will have to supply a bank card or redeem an iTunes Gift Card. -
Where can i find the theory for session and call transaction method
hi
where can i find the theory for session and call transaction method
byecheck this link
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.planetsap.com/bdc_main_page.htm
lsmw, bapi, bdc- session, bdc-calltransaction
u can get it in help.sap.com also -
Difference between Session method and call transaction
Hi,
please give me the differences between session method and call transaction,
briefly explaining synchronus , asynchronus, process, update.
Thanks in advanceHi Vijay Kumar
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
Among the two methods call transaction is better compared to session bcoz data transfer is faster in it.
Differences between call transaction and session.
Session Method:
1) Data is not updated in the database table until the session is processed.
2) No sy-subrc is returned.
3) Error log is created for error records.
4) Updation is always synchronous.
Call Transaction Method:
1) Immediate updation in the database table.
2) sy-subrc is returned.
3)Error need to be handled explicitly.
4) updation can be synchronous as well as asynchronous.
2) ya u can use using the N mode no screen.
3)u can't handle multiple transaction in call transaction.
4) u can handle multiple transaction in session using the BDC_INSERT fm.
5)When u go to SM35 u can able to see the error records.
Which is best?
That depends on your requirement. Both of them have there advantages.
According to the situation u can choose any one of these.
difference between batch input and call transaction in BDC Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
For session method,these are the function modules to b used.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
For call transaction,this is the syntax.
CALL TRANSACTION TCODE USING BDCDATA
MODE A or E or N
UPDATE A or S
MESSAGES INTO MESSTAB.
Take a scenario where we need to post documents in FB01 and the input file has say 2000 records (2000 documents, not line items in FB01 but 2000 records)
In the BDC call transaction method
We call the transaction FB01 2000 times (once for each record posting) and if the processing fails in record no 3 it can be captured and start with reocord 4.
Eg: Loop at itab.
call transaction FB01
capture errors
endloop.
In the session method.
We do not explicity call the transaction 2000 times, but all the records are appeneded into a session and this session is stored. The processinf of the session is done wwhenever the user wants it to be done. Hence the errors cannot be captured in the program itself
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
Batch Input Session method is asynchronous as told by others here. But the advantage of this is that you have all the error messages and the data for each transaction held persistantly. You don't have to code anything for processing them or writing the logs.
But at the same time, the same feature can be disadvantageous if you need to react to an error or if there are too many errors to manually correct in a session. Since the session are created in the program and its execution is done seperately, you loose the trackability of such transactions.
With a call transaction, what was a disadvantage above will become an advantage. Call transaction immediately gives you messages back and you can react to it in your program. But the disadvantage is that, if you have several hundreds of transactions to run, running them from within the program can be resource crunching affair. It will hamper the system performance and you cannot really distribute the load. Of course, you have some mechanisms with which you can overcome this, but you will have to code for it. Also, storing the messages and storing the errored transaction data etc will have to be handled by you in the program. Whereas, in batch input session, your program's job is to just create the session, after that everything is standard SAP system's responsibility.
Ideally, you should do a call transaction if the resources are not a problem and if it fails, put the errored transaction into a session.
You can decide based on the data volume that your BDC is processing. If data volume is high go for session else call transaction will do.The call transaction updates will be instantaneous where as session needs to be processed explictly after creation.
Session Method
1) Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ...
bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
1) Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E>
update <L/A/S>
messages into BDCMSGCOLL.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Check the following links:
http://www.sap-img.com/bdc.htm
See below example code :
Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
Once you execute the program and it creates the session at SM35 Transaction.
Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.
Modification Log
Date Programmer Request # Description
06/10/2005 Chetan Shah DV3K919557 Initial coding
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04
Goto LSMW-> Select Direct Input method in 1st step. These are the standard programs for data transfer.
Otherwise goto SPRO->SAP Reference IMG-> Under this you'll find standard data transfer programs module wise.
Reward points,
Shakir -
Difference between Session method and Call transaction method
Hi,
Difference between Session method and Call transaction method in BDCHi,
SESSION method:
Is a standard procedure for transferring large amount of data into the R/3 system.
Data consistency is ensured because batch input uses all thje checks conducted on the normal screen.
It is a two step procedure:
1. Progarm: creates batch input session. This session is the data file that includes everything to begin the transaction.
2. Process session: Which then actually transfers the data to database table.
In this method an ABAP/4 program reads the external data that is to be entered in the SAP system and stores the data in a session.
A session stores the actions that are required to enter your data using normal SAP transactions i.e. data is transferred to session which inturn transfers data to database table. Session is an intermediate step between internal table and database table.
Data along with it's actions are stored in session. i.e. data for screen fields, to which screen it is passed, the program name behind it and how next screen is processed.
When the program has finished generating the session, u can run the session to execute the SAP transactions in it.
BDC_OPEN_GROUP
You create the session through program by BDC_OPEN_GROUP function.
1) User Name: User Name.
2) Group : Name of the session
3) Lock Date : The date when you want to process the session.
4) Keep : This parameter is passed as 'X' when you want to retain session even after processing it.
BDC_INSERT
Data is transferred to session by BDC_INSERT.
BDC_CLOSE_GROUP.
With this function the session will be closed.
CALL TRANSACTION method.
Syntax: call transaction <tr code> using <bdctab>
mode <A/N/E>
update <S/A>
messages into <internal table>.
<tr code> : transaction code
<bdctab> : Name of the BDC table
mode: mode in which you execute the transaction.
A : all screen mode ( all the screens of the transaction are displayed )
N : no screen mode ( no screen will be displayed when you execute the transaction )
E : error screen ( only those screens are displayed where in you have error record )
Update type:
S: synchronous update in which if you change data of one table then all the related tables gets updated and SY_SUBRC is returned for once and all.
A: asynchronous update in which if you change data of one table, the sy-subrc is returned and then updation of other affected tables takes place. So if system fails to update other tables still sy-subrc returned is zero.(that is when first table gets updated ).
messages: if you update database table, operation is either successful or unsuccessful. These messages are stored in internal table. This internal table structure is like BDCMSGCOLL.
TCODE: transaction code.
DYNAME: batch input module name.
DYNNUMB: batch input dyn no.
MSGTYP: batch input message type.
MSGSPRA: batch input language id of message.
MSGID: message id.
MSGV1 .MSGV5: message variables
For each entry which is updated in the database table message is available in BDCMSGCOLL.
Reward if useful
Regards
Srinu -
Status used in open and completed transactions in Fact Sheet
Hi! I would like to confirm the logics used in the fact sheet to display open and completed transactions. I read on the help that for open (for example) transactions, system is using status 'open' and 'in process'. This seems to me like system status. However, when I ran the fact sheet, the control is more at the user status level. So, I need clarification on this. Also, where can I find the status and transaction logics used for the extraction of these transactions (e.g. what transaction types are used)? I could not find the codings in the method GET_REPORT under class CL_CRM_CCKPT_PROCESS_CLOSED for example. Perhaps I have looked in the wrong place?
Appreciate any help on the above.
Cheers!
SFNo response. Based on what is being debugged, all transactions are taken into account.
-
Debugging Classes and methods in a Function Module
Folks
While debugging a Function Module, I want to know which classes and methods are being called as part of this FM and want to put a breakpoint in this Class method and check the details of variables in this methods. How do I accomplish this ?
Is the hierarchy that - FM will have classes which will have methods or is it something different ?
ThanksGoto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code ( se37) and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...
than can debug further. -
What is business add-ins and business transaction events
Dear All,
Would you mind tell me what it sht business add-ins and business transaction events ?
i still not understand about this after i read the training material
Regards
LukeHi LukeWong ,
BAdi:
SAP Business Add-Ins (BAdIs) are one of the most important technologies used to adapt SAP software to specific requirements. BAdIs were introduced with Release 4.6 and replace function module exits. This technology is not limited to SAP applications. BAdI calls can be integrated in customer applications. These can then be enhanced by other customer applications. In the various SAP applications, BAdI calls are implemented at places where enhancements are appropriate.Business add-ins are enhancements to the standard version of the system. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits, two different views are available:
· In the definition view, an application programmer defines exit points in a source that allow specific industry sectors, partners, and customers to attach additional coding to standard SAP source code, without having to modify the original object.
· In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard solution, if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, country-specific versions, industry solutions, partner, customer, and so on). You can create definitions and implementations of Business Add-Ins at any level of the system landscape.SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to differentiate between Add-In implementations using the filter Country or other criteria.
The enhancement technique is set up in such a way that it is possible to define interfaces for ABAP soure code, screens, GUI interfaces, and tables. These allow customers to include their own enhancements in the standard. A single Business Add-In contains all of the interfaces necessary to implement a specific task.
BADI is just an object-oriented version of user-exit. Instead of entering program code into some function module (as in customer-exit), you define some class which has to implement predefined methods and those methods are fired at predefined points just like an old user-exit. Some BADI can have multiple independent implementations which is much better for software deployment as several developers can implement the same BADI independently. BADI/UserExists are used to enhance R/3 For customer Needs.
Actually there is no transaction to find when and where the BADI
is called.
1. You can see the BADI description to find why it is called.
2. Once you implemented and activated the BADI, put some break points
in the BADI and see "where else used" option to check in what all
programs this BADI is called. In the ITS debug, when you are doing
the operation what exactly the BADI description tells, it will take
to the break points and you have to do manually debug the whole thing.
I know its bit difficult to do manual debug the whole thing, it
takes lot of time, but you have to be very patience when you are
dealing with BADI's.
Transaction SE18 is the BADI equivalent of transaction SMOD
Transaction SE19 is the BADI equivalent of transaction CMOD .
To find the BADI to be implemented and then implement this via SE19.
These steps should enable you to find any BADI related to any transaction in a matter of minutes.
Procedure 1:
1) Go to the transaction SE37 to find your function module.
2) Locate the function SXV_GET_CLIF_BY_NAME.
3) Put a breakpoint there.
4) Now open a new session.
5) Go to your transaction. 6) At that time, it will stop this function.
7) Double click on the function field EXIT_NAME.
8) That will give you name of the BADI that is provided in your transaction.
Business Add-Ins
Procedure 2:
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
4) Now Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction
Check this blogs 2 find a BADI:
How To Define a New BAdI Within the Enhancement Framework (Some Basics About the BAdI,BAdI Commands in ABAP,
When to Use a BAdI?)
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
How to implement a BAdI And How to Use a Filter
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
Introducing Business Add-Ins
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f3202186-0601-0010-6591-b832b1a0d0de
How to implement BAdi in Enhancement Framework
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb99702
Business Add-Ins
http://help.sap.com/saphelp_47x200/helpdata/en/ee/a1d548892b11d295d60000e82de14a/frameset.htm
BAdI: Customer-Defined Functions in the Formula Builder
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
Difference Between BADI and User Exits
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
To Use BADI - Business Add In you need to Understand ABAP OO Interface Concept
http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
Business Transaction Events
Business Transaction Events (Open FI) The Open FI enhancement technique was developed in the Financial Accounting component. Open FI is based upon the following principles: Application developers must define their interface in a function module, an assignment table is read in the accompanying (generated) code, and the customer modules assigned are called dynamically. This technique differentiates between enhancements that are only allowed to have one implementation and enhancements that can call multiple implementations in any sequence desired. Both industry-specific and country-specific enhancements may be defined.
SAP business transaction events are one type of customer enhancements provided by SAP! We can access the business transaction events using FIBF.Next we have to find the process interface for duplicate invoice check!
check this blog for details on SAP business transaction events
Business Transaction Events
http://fuller.mit.edu/user_exits/business_transaction_event.htm
FI Enhancement Technique How-To-Guide on the Usage of Business Transaction Events (BTE)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/207835fb-0a01-0010-34b4-fef1240ba9b7
Creation of Events via Business Transaction Events
http://help.sap.com/saphelp_nw04/helpdata/en/3b/7f3e8be57c11d1951f0000e82dec10/content.htm
In SAP R/3 you must activate the business transaction events (BTEs) for Availability Check Using SAP R/3. To set this indicator in SAP R/3:........
http://help.sap.com/saphelp_crm40/helpdata/en/b6/de3efc6bbcdc4b948d466857a10323/content.htm
cheers!
gyanaraj
****Pls reward points if u find this helpful -
ALV Tree list output using the Class and method
Hi,
How to get the internal table values of ALV Tree List in classes.
My requirement is i need to store the output values in Ztable of a SAP Transaction of CK86_99.
for this, i copied the SAP Standard Transaction into Z tcode and i am trying to poplulate the output display into Ztable. But this standard tcode CK86_99 is using the classes of ALV tree list to display output.
CL_STRUCTURE_EXPLOSION_TREE -- Class
CONSTRUCTOR - method
Finally in the above mentioned method, i am able to see the output values of ALV tree list in the internal table of mt_output_table.
But these are SAP Standard Class and method.
My doubt is, How to get these internal table values in my Zprogram.
is there any user exit or badi can we use in the method of class???? Actually my system is 4.6C
Please suggest me on this problem.
Thanks in advance
KBS ReddyFirst your getInstance() method returns 'singleton' which you havent declared/init anywhere.
your getAll() method needs to be static if you need to call it the way you are doing.
In your getAll() method u are passing a parameter called patientRecord ... where have you declared/init it.
i think you have to do something like this ... if i have understood you correctly.
/* THIS IS IN YOUR SERVLET*/
Collections c = database.getAll();
out.println(C);
/* YOUR FlatfileDatabase CLASS HAS SOMETHING LIKE THIS*/
public static FlatfileDatabase getInstance() {
return new FlatfileDatabase();
public static Collections getAll() { -
How can we correct and process errorrecords in session and call transaction
hai all
how ca we correct and process error records in session and call transaction method . tell me with coding.
Edited by: swamy katta on May 14, 2008 10:25 AM
Edited by: swamy katta on May 14, 2008 10:26 AM
Edited by: swamy katta on May 14, 2008 10:27 AMhi,
Check out the below sample code ...Here are the records are getting posting with call transaction method and a session is getting created with erroreneous records....
REPORT ztest_report
NO STANDARD PAGE HEADING
LINE-SIZE 255
MESSAGE-ID ZRASH.
* Internal Table Declarations *
*--Internal Table for Data Uploading.
DATA : BEGIN OF IT_FFCUST OCCURS 0,
KUNNR(10),
BUKRS(4),
KTOKD(4),
ANRED(15),
NAME1(35),
SORTL(10),
STRAS(35),
ORT01(35),
PSTLZ(10),
LAND1(3),
SPRAS(2),
AKONT(10),
END OF IT_FFCUST.
*--Internal Table to Store Error Records.
DATA : BEGIN OF IT_ERRCUST OCCURS 0,
KUNNR(10),
EMSG(255),
END OF IT_ERRCUST.
*--Internal Table to Store Successful Records.
DATA : BEGIN OF IT_SUCCUST OCCURS 0,
KUNNR(10),
SMSG(255),
END OF IT_SUCCUST.
*--Internal Table for Storing the BDC data.
DATA : IT_CUSTBDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA : IT_CUSTMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_FLAG1(1) VALUE ' ',
"Flag used for opening session.
V_TLINES LIKE SY-TABIX,
"For storing total records processed.
V_ELINES LIKE SY-TABIX,
"For storing the no of error records.
V_SLINES LIKE SY-TABIX.
"For storing the no of success records.
* Selection screen *
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS : V_FNAME LIKE RLGRAP-FILENAME,
V_SESNAM LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
* Start-of-selection *
START-OF-SELECTION.
*-- Form to upload flatfile data into the internal table.
PERFORM FORM_UPLOADFF.
* TOP-OF-PAGE *
TOP-OF-PAGE.
WRITE:/ 'Details of the error and success records for the transaction'
ULINE.
SKIP.
* End of Selection *
END-OF-SELECTION.
*-- Form to Generate a BDC from the Uploaded Internal table
PERFORM FORM_BDCGENERATE.
*--To write the totals and the session name.
PERFORM FORM_WRITEOP.
*& Form form_uploadff
* Form to upload flatfile data into the internal table.
FORM FORM_UPLOADFF .
*--Variable to change the type of the parameter file name.
DATA : LV_FILE TYPE STRING.
LV_FILE = V_FNAME.
*--Function to upload the flat file to the internal table.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = LV_FILE
* FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
DATA_TAB = IT_FFCUST
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC = 0.
*--Deleting the headings from the internal table.
DELETE IT_FFCUST INDEX 1.
*--Getting the total number of records uploaded.
DESCRIBE TABLE IT_FFCUST LINES V_TLINES.
ENDIF.
ENDFORM. " form_uploadff
*& Form Form_bdcgenerate
* Form to Generate a BDC from the Uploaded Internal table
FORM FORM_BDCGENERATE .
*--Generating the BDC table for the fields of the internal table.
LOOP AT IT_FFCUST.
PERFORM POPULATEBDC USING :
'X' 'SAPMF02D' '0105',
' ' 'BDC_OKCODE' '/00' ,
' ' 'RF02D-KUNNR' IT_FFCUST-KUNNR,
' ' 'RF02D-BUKRS' IT_FFCUST-BUKRS,
' ' 'RF02D-KTOKD' IT_FFCUST-KTOKD,
'X' 'SAPMF02D' '0110' ,
' ' 'BDC_OKCODE' '/00',
' ' 'KNA1-ANRED' IT_FFCUST-ANRED,
' ' 'KNA1-NAME1' IT_FFCUST-NAME1,
' ' 'KNA1-SORTL' IT_FFCUST-SORTL,
' ' 'KNA1-STRAS' IT_FFCUST-STRAS,
' ' 'KNA1-ORT01' IT_FFCUST-ORT01,
' ' 'KNA1-PSTLZ' IT_FFCUST-PSTLZ,
' ' 'KNA1-LAND1' IT_FFCUST-LAND1,
' ' 'KNA1-SPRAS' IT_FFCUST-SPRAS,
'X' 'SAPMFO2D' '0120',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0125',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0130',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0340',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0360',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0210',
' ' 'KNB1-AKONT' IT_FFCUST-AKONT,
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0215',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0220',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0230',
' ' 'BDC_OKCODE' '=UPDA'.
*--Calling the transaction 'fd01'.
CALL TRANSACTION 'FD01' USING IT_CUSTBDC MODE 'N' UPDATE 'S'
MESSAGES INTO IT_CUSTMSG.
IF SY-SUBRC <> 0.
*--Populating the error records internal table.
IT_ERRCUST-KUNNR = IT_FFCUST-KUNNR.
APPEND IT_ERRCUST.
CLEAR IT_ERRCUST.
*--Opening a session if there is an error record.
IF V_FLAG1 = ' '.
PERFORM FORM_OPENSESSION.
V_FLAG1 = 'X'.
ENDIF.
*--Inserting the error records into already open session.
IF V_FLAG1 = 'X'.
PERFORM FORM_INSERT.
ENDIF.
*--Populating the Success records internal table.
ELSE.
IT_SUCCUST-KUNNR = IT_FFCUST-KUNNR.
APPEND IT_SUCCUST.
CLEAR IT_SUCCUST.
ENDIF.
*--Displaying the messages.
IF NOT IT_CUSTMSG[] IS INITIAL.
PERFORM FORM_FORMATMSG.
ENDIF.
*--Clearing the message and bdc tables.
CLEAR : IT_CUSTBDC[],IT_CUSTMSG[].
ENDLOOP.
*--Getting the total no of error records.
DESCRIBE TABLE IT_ERRCUST LINES V_ELINES.
*--Getting the total no of successful records.
DESCRIBE TABLE IT_SUCCUST LINES V_SLINES.
*--Closing the session only if it is open.
IF V_FLAG1 = 'X'.
PERFORM FORM_CLOSESESS.
ENDIF.
ENDFORM. " Form_bdcgenerate
*& Form populatebdc
* FOrm to Populate the BDC table.
FORM POPULATEBDC USING VALUE(P_0178)
VALUE(P_0179)
VALUE(P_0180).
IF P_0178 = 'X'.
IT_CUSTBDC-PROGRAM = P_0179.
IT_CUSTBDC-DYNPRO = P_0180.
IT_CUSTBDC-DYNBEGIN = 'X'.
ELSE.
IT_CUSTBDC-FNAM = P_0179.
IT_CUSTBDC-FVAL = P_0180.
ENDIF.
APPEND IT_CUSTBDC.
CLEAR IT_CUSTBDC.
ENDFORM. " populatebdc
*& Form FORM_OPENSESSION
* Form to Open a session.
FORM FORM_OPENSESSION .
*--Variable to convert the given session name into reqd type.
DATA : LV_SESNAM(12).
LV_SESNAM = V_SESNAM.
*--Opening a session.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = LV_SESNAM
HOLDDATE = '20040805'
KEEP = 'X'
USER = SY-UNAME
PROG = SY-CPROG
* IMPORTING
* QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF SY-SUBRC <> 0.
WRITE :/ 'Session not open'.
ENDIF.
ENDFORM. " FORM_OPENSESSION
*& Form FORM_INSERT
* fORM TO INSERT ERROR RECOED INTO A SESSION.
FORM FORM_INSERT .
*--Inserting the record into session.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FD01'
* POST_LOCAL = NOVBLOCAL
* PRINTING = NOPRINT
* SIMUBATCH = ' '
* CTUPARAMS = ' '
TABLES
DYNPROTAB = IT_CUSTBDC
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
WRITE :/ 'Unable to insert the record'.
ENDIF.
ENDFORM. " FORM_INSERT
*& Form FORM_CLOSESESS
* Form to Close the Open Session.
FORM FORM_CLOSESESS .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM. " FORM_CLOSESESS
*& Form FORM_FORMATMSG
* Form to format messages.
FORM FORM_FORMATMSG .
*--Var to store the formatted msg.
DATA : LV_MSG(255).
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = SY-MSGID
LANG = SY-LANGU
NO = SY-MSGNO
V1 = SY-MSGV1
V2 = SY-MSGV2
V3 = SY-MSGV3
V4 = SY-MSGV4
IMPORTING
MSG = LV_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE :/ LV_MSG.
ENDIF.
ULINE.
ENDFORM. " FORM_FORMATMSG
*& Form form_writeop
* To write the totals and the session name.
FORM FORM_WRITEOP .
WRITE :/ 'Total Records Uploaded :',V_TLINES,
/ 'No of Error Records :',V_ELINES,
/ 'No of Success Records :',V_SLINES,
/ 'Name of the Session :',V_SESNAM.
ULINE.
ENDFORM. " form_writeop
* if routeindicator is initial.
* LOOP AT IT_YMMEE00090.
* LV_LENGTH = STRLEN( IT_YMMEE00090-CHANGETYPE ).
* IF SY-TABIX = '1'.
* IF IT_YMMEE00090-CHANGETYPE = 'B' AND LV_LENGTH = 1.
* ROUTEINDICATOR = 'S'.
* ELSEIF IT_YMMEE00090-CHANGETYPE = 'R' AND LV_LENGTH = 1.
* ROUTEINDICATOR = 'S'.
* ELSEIF IT_YMMEE00090-CHANGETYPE = 'S' AND LV_LENGTH = 1.
* ROUTEINDICATOR = 'S'.
* ELSEIF IT_YMMEE00090-CHANGETYPE CA 'BRSCD' AND LV_LENGTH GT 1
* AND LV_LENGTH LE 5.
* ROUTEINDICATOR = 'S'.
* ENDIF.
* ELSE.
* IF IT_YMMEE00090-CHANGETYPE = 'B' AND LV_LENGTH = 1 AND
* ROUTEINDICATOR = 'S'.
* ROUTEINDICATOR = 'S'.
* ELSEIF IT_YMMEE00090-CHANGETYPE = 'R' AND LV_LENGTH = 1 AND
* ROUTEINDICATOR = 'S'.
* ROUTEINDICATOR = 'S'.
* ELSEIF IT_YMMEE00090-CHANGETYPE = 'S' AND LV_LENGTH = 1 AND
* ROUTEINDICATOR = 'S'.
* ROUTEINDICATOR = 'S'.
* ELSEIF IT_YMMEE00090-CHANGETYPE CA 'BRSCD' AND LV_LENGTH GT 1
* AND LV_LENGTH LE 5 AND ROUTEINDICATOR = 'S'.
* ROUTEINDICATOR = 'S'.
* ENDIF.
* ENDIF.
* ENDLOOP.
* endif. -
Interface without Attributes and Methods
Hi Experts.,
What is the use of having an interface without Attributes and Methods.
I saw the interface IF_MODEL_MM in standard, wondered what would be the purpose of this interface .
Kindly guide me regarding this ..
Thanks & Regards.,
S.SivakumarHi Uwe Schieferstein .,
I am at the Starting Point of doing a classical dynpro program via Abap Objects which address all controls with MVC Architecture .So i debugged the standard ME21n transaction to find out how i can start with. I came across this interface which has no Attributes and Methods.I wondered y .Thats y i posted a Question .I also seen a lot of Standard classes
CL_TABLE_VIEW_MM
CL_BASIC_MODEL_VIEW_MM
CL_COMPOSITE_SCREEN_VIEW_MM
CL_SCREEN_VIEW_MM
CL_TABLE_VIEW_MM
CL_TABSTRIP_VIEW_MM
CL_TC_BUTTON_VIEW_MM
CL_TC_ITEM_VIEW_MM
CL_TOGGLE_VIEW_MM
CL_VALUE_MODEL_VIEW_MM
and much more for Model and Controllers ..Can u plz guide me how i can make use of this classes effictively in my custom module pool programming ..
Thanks&Regards.,
S.Sivakumar
Maybe you are looking for
-
please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Pl
-
I am conneting my Ipad to mutiple Pcs, (windows and Mac) and it is not being recognized in the device list on itunes or the computers. the ipad is fully charged, I have reset it numerous times and it gives me the apple icon and then the "connect to
-
Use of CatalogTools property file
Hi All, When we can configure everything about a repository in it's properties file, what is the use of CatalogTools.properties file iin ATG. Please give us the brief description. Thanks, Kushal.
-
Would be very helpful if anyone could help me out! Thanks fellow iPad users.
-
Since i added osx mountain lion, my computer runs really slow, especially internet
Can I go back to what I had before (I think snow leopard?)? This new software is making my computer run too slow. I sometimes have to wait a full minute just to get online. Sometimes, I have to turn the whole computer off and back on again to get