Verify by Visa does not fit in the window

The Verify by Visa page is too big for the window
as a result one cannot enter all the security information to complete the purchase
the only way to make purchases is to use something like Internet Explorer for online shopping - Verify by Visa works on that platform.

Did you try to reset (Ctrl + 0; zero) the page zoom (or zoom out: Ctrl + -) on that page to see if that helps?
If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

Similar Messages

Template does not fit into the window

Hello all,
<b>Template does not fit into the window (Message no. SSFCOMPOSER173)</b>
I am getting the above error in when i try to preview my smartform.
The template is in footer window. I have only 3 lines in the template.
And the size of template is less than window size.
I do not understand why this error. This happened when there are many line items in the main window. With less no. of line items it worked well.
If you have any suggestions Please help.
Thanks.

Hi,
Please check the following points:
1. Font size and font family.
2. Line spacing
3. Allignment.
4. Left and right margin
Deserve Rewards.
regards.

Photo does not fit in the screen

I watched that video http://www.youtube.com/watch?v=KJMi5l9Ru-g and tried this to do the parallax scrolling with the image this on my page. Unfortunately, my photo does not fit in the whle screen, even if I take a . jpg image 3000 px wide. ( look here ) I have no idea how I can get the photo to fit in the whole screen.
Thank you for your help.
Heike

Hello again,
I'm sorry, but nothing works and I don't understand, what you mean. I will show you again with no other item on the page. I draw a rectangle which snaps each of the lines at the outside.
I got rid of the stroke and the fill.
I filled with a .jpg image 3000 px wide.
For the future parallax scrolling I need to set up the photo in vertical tile. And this is, how it shows on the screen.
I still have no idea, what I made wrong. Thanks for your help
Heike

I recently bought a Macbook Air and a Thunderbolt Display and the laptop's power is supposed to come from the display, but the power cable on the display does not fit into the Macbook Air.

I recently bought a 11" Macbook Air and a 27" Thunderbolt Display.The laptop's power is supposed to come from the display when connected, but the power cable on the display does not fit into the Macbook Air.

If your MBair is a 2012 model, it has a Magsafe 2 power connection. The monitor probably has the old magsafe connection. If this is the case, you need this adapter.
http://store.apple.com/us/product/MD504ZM/A?fnode=5a

Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))

While performing a system maintenance task we came across this Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))
Can someone help us in resolving this
Thanks and regards
RS

Please expand the log also please check the SAP note 1835436
Regards
Aneesh

Hi, my iphone 5 charger does not fit in the hole iphone .. it seems as if something inside the iphone had moved because I see that the charger works perfect in another iphone 5

Hi, my iphone 5 charger does not fit in the hole iphone .. it seems as if something inside the iphone had moved because I see that the charger works perfect in another iphone 5

Clean the lint or grit out of it with canned air or a toothpick.

I have a Sony Mini HiFi ((CMT-BX70DBI) and my 4th gen does not fit on the iPod dock. I assume I need a new adaptor but don't know which one??

I have a Sony Mini HiFi (CMT- BX70DBI) and my 4th gen does not fit on the dock. I assume I need an adaptor, but which one?

If the Sony uses the Universal Dock System you need this adopter. If it does not they try Sony.
http://store.apple.com/us/product/MC650ZM/A?fnode=MTY1NDA0OQ&mco=MTg5MTgxMjc

"Add New Tab" button does not exist in the Window -Customize Toolbar, and not on my Navigator toolbar. Where can I find one to put on my Navigator toolbar, please?

I see "Add New Window" but..."Add New Tab" button does not exist in the Window -Customize Toolbar any longer, and not on my Navigator toolbar. Where can I find one to put on my Navigator toolbar, please?
Thanks

It's the "+" on the Tab bar. You can move it to the Navigation Toolbar if you prefer. When you start Customize, the + moves to the far right end of the Tab bar. You can drag it where you want (see attached image).
Any luck?

Firewire board does not fit in the PCI slot

I got a Firewire board and tried to put it in the mother board and it does not fit. It appears that the mother board bus is a fraction too short to fit the board in. I placed the board in a real computer (dell) and it went in fine. Any suggestions??????

Navy, welcome to the forum,
it would be helpful if you could post which 3000 Desktop and Operating System you have, even better post the Type and Model Number this will help members to help you. Please do NOT post your s/n.
Thanks
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Verified by visa does not work

When trying to use Verified by Visa, it no longer recognizes our password. Instead, it allows you to try to provide the password 3 times. It then locks out and forces us to reset the password. This new password then works for the one transaction being authorised, but will not work on any subsequent transactions. Rinse. Repeat.
This problem appears different than the 'mixed frame' or 'blank pop-up' problems other users have reported with this same authentication system. Tracking back some of the suggest modifications on 'about:config' on SSL and trusted negotiation modifications, none of them appear relevant (i.e., all the switches are set as the web suggests they should be).
It also feels like this problem only was introduced recently after a Firefox update.
Any thoughts?

'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?

Brand new 3GS Headphone jack does not fit in the jack hole , anyone else?

I just bought 32gb white 3GS 1 1/2 weeks ago, and I just went into the box to try my earphones for
the first time. I thought I was dreaming,, but I could not get the jack to fit in the hole Even slightly forcing it didn't help. I didn't want to go crazy on pushing it. I decided to take my light case of the phone, just to make sure that the case wasn't getting in the way.. It only goes down about 3/4 way down the hole. I turned on some music,, but obviously the jack is not down enough to make the connection. Has anyone else had this problem? It just doesn't seem to want to fit, and yet it is the brand new one that came with the phone.

OK,,, I guess I will have to try,, but the way the hole is structured, I am afraid to push too hard, and perhaps have the plastic around the metal rim crack the top of the unit from the stress. Is this a one and only time I have to go through, because I have given it a more than ample push,, and if I have to experience that every time.. I had better go to the Genius bar to find out if I can get one with a more forgiving insert. I will also go to the Rogers store and see if I get the same experience on their demo
Message was edited by: Stoker
Message was edited by: Stoker
Message was edited by: Stoker

NI-VISA does not appear in the addition installers window

Its seems that i cannot add any NI-VISA packages to my "additional installers" window.
The dev system has VISA 4.0 and LV 8.0 and even after downloading and installing the VISA runtime especially to fix this problem, i still cannot see it in the list!!! There also seems to be lots more missing from what i have seen in screenshots on previous posts. Why oh why is this happening!
Alex.
:. LV2010 SP1 ... W7 .:

Thanks for your reply! It seems to have worked a treat!
I did the following steps:
1. uninstalled VISA 4.0 and DAQmx 8.x
2. installed DAQmx 8.6 (i wanted to upgrade to this a some point anyway)
3. installed VISA 4.2
I can now open the Installer Properties => Additional Installers window and have the following options:
and now that i can select the Measurement and Automation Explorer it has solved a second issue for me that i posted on this forum (see:
Problems with building and installer - hardware config). An error used to occur when i tried to include the "Hardware Configuration from MAX" but there are no errors now. Im sure it has something to do with also including the MAX in your installer. See Below:
Happy days for a monday
Message Edited by ali66b on 11-19-2007 11:21 AM
:. LV2010 SP1 ... W7 .:

HT4994 old sim does not fit in the iphone

Trying to move old sim data to new iphone4s sim, but the old sim card is to big to fit in the iphone as instructed to do - any suggestions would be grateful of do i need to get this done at a shop??

The iPhone 4 and 4S use a microSIM.
Contact the carrier for a replacement SIM for the device.

When I open a new window, the spinner does not stop, or the window open

I have a MBP 3 yrs. old, running Snow Lep. When I open a new window, the spinner in the address bar spins and window does not open unless I click on the X and stop the spinner. Some times this doesn't work either. It just hangs up trying to open the next window.

The given are very little details about your problem so please elaborate.
2. on each page load you have to verify whether the session variable. if "IsLoggedIn" exists and its value is "true" then you can show the requested page otherwise redirect to login page.
if(Session["IsLoggedIn"] == null || Session["IsLoggedIn"] != "true")
Response.Redirect("login.aspx");
Better way: use a master page. In the load_page event, check the session. Thus, you wouldn't need to write the method to check in every page, just in the master page.
Noam B.
Do not Forget to Vote as Answer/Helpful, please. It encourages us to help you...
Masterpage is a better idea.
But The login page shouldn't use MasterPage OR need to have logic to check before redirecting to login page if you are already in Login page.
Otherwise you will get into Recursive Redirection error.
hope this helps.

The pipe "|" does not work in the Windows command console.

This is a very weird problem. I am using 64-bit Windows VISTA command window for very long time and it just suddenly do not work with the pipe character anymore. I have checked the PATH and PATHEXT in Administrator mode and they look OK.
Detail below:
For example, the "dir" work as expected.
C:\newcmd>dir *.txt
Volume in drive C has no label.
Volume Serial Number is 4CD2-5B84
Directory of C:\newcmd
10/31/2014 11:33 PM               737 adder.txt
04/05/2015 03:21 PM         1,890,696 au01.txt
12/17/2014 10:40 PM             4,204 bintree.txt
07/26/2011 10:47 PM         3,298,568 ke30-07-2011.txt
If pipe to a VBScript file below, the error message shows up. The error message is actually the content of %PATHEXT% environment variable:
C:\newcmd>dir *.txt|cscript //nologo cut.vbs -c "1-12"
'.COM;.EXE;.BAT;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC;.REX;.REXG;.REXP;.CMD;'
is not recognized as an internal or external command, operable program or batch file.
The VBScript works fine without the "|":
C:\newcmd>cscript //nologo cut.vbs
Usage:cut "<delimiter>" "<column 0>,<column 1>,..."
Example:cut "|" "0,1,8"
What is going on and how to fix it? Help?
C:\newcmd>echo %PATH%
C:\Windows\system32;C:\Windows\System32\Wbem;C:\Program Files (x86)\CyberLink\Power2Go;C:\Program Files (x86)\Java\jre1.6.0_07\bin;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files\nodejs\;C:\Program Files\ooRexx;c:\
C:\newcmd>echo %PATHEXT%
.COM;.EXE;.BAT;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC;.REX;.REXG;.REXP;.CMD;

Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.] Safe Mode is a temporary diagnostic feature and you can exit and start Firefox normally again. The installed '''Extensions''', themes ('''Appearance''') and '''Plugins''' are disabled in safe mode.
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

Verify by Visa does not fit in the window

Similar Messages

Maybe you are looking for