Verify Cluster failed

Hi,
I am installing SAP ECC6.0 on Windows and this setup also invloves MSCS. I am done with the installation of Central Services Instance for ABAP (ASCS), First MSCS Node and Database Instance on Node 1. When i do the Verify Cluster in Oracle FailSafe Manager, its giving error as mentioned below.
32:50 Starting clusterwide operation
2   10:32:50    ** ERROR : 0x35: The network path was not found.
3   10:32:50    ** ERROR : FS-10621: Failed to open the registry key
<Node2_Hostname>\HKEY_LOCAL_MACHINE\Software\Oracle\FailSafe\Server
4   10:32:50    ** WARNING : FS-11081: Node <Node2Hostname> is not available for the specified operation. Operation continuing...
5   10:32:50   > FS-10998:
Please let me know the solution to the above mentioned issue.
Regards,
Ranjith

Hi Ranjit,
Can you check wheather IPMP is properly configured ( check with you system team ).
Rather than sap ,can you test the drive which is provided to you for installing SAP is moving proper from 1 node to other node.
It mean you for e.g drive F:\ provided to you for installtion of oracle software and database . Stop SAP & oracle and just try to move the F:\ drive from Node 1 to Node 2 manually . After that Try to shutdown the node on which F:\ drive is there , when OS is getting shutdown the drive F:\ should automatically move to other node .
Try this m if it is working then , Oracle Fail safe should also work.
Any Query pls reply.
Thanks
Anil

Similar Messages

Error in Verify Cluster of Oracle FailSafe Manager

Hello,
I am doing SAP ERP6.0 installation on MSCS cluster environment. I have finished the following steps
ASCS Installation,First MSCS Node Configuration,Database Instance Installation,Additional MSCS node configuration, Enqueue Replication Server Installation and Central Instance Installation.
I am now creating the Oracle FailSafe Group on the MSCS node which has the quorum resource in my case the DB node.
After adding the Cluster when I click on Verify Cluster I get error. Below is the VerifyCluster log
1   15:06:04 Starting clusterwide operation
2   15:06:04   > FS-10998:
3   15:06:04 FS-10500: POPWRMSSAPDB : Starting verification of cluster PWRCLUS01
4   15:06:04   > FS-10998:
5   15:06:04 FS-10544: POPWRMSSAPDB : Verifying the cluster quorum resource
6   15:06:04   > FS-10545: Cluster quorum resource QUORUM is located at Q:\Cluster\
7   15:06:04   > FS-10998:
8   15:06:05    ** ERROR : 0x80010105: The server threw an exception.
9   15:06:05    ** ERROR : FS-10757: A COM error was returned when trying to send a work item to the worker
10 15:06:06 The clusterwide operation failed !
Kindly suggest what action should I take to resolve this error.
Regards
Mitesh Nair

Hi and welcome to the forums!
Here are some possible reasons and resolutions.
Let us know how it goes!
Thanks,
Bifocals
KB28396 When installing the BlackBerry Desktop software the following error is received "The installation files cannot be validated. Please verify the installer package and try again."
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Verify operation failed and Runtime Error While using Adobe Reader 10.1.2

We have installed Adobe reader 10.1.2 on Windows Servers 2008 and user are accessing its using Citrix.When users open PDF files they are getting message "Verify Operation Failed" and also getting error "Runtime Error"
even on one server we updated the version to 10.1.3 but still they are getting same error.
Pdf files open up but after multiple attempt..
Error are provided below

Hi, I have been using Citrix on Server 2008 for quite soemtime. And have not seen any such issues with Reader 10.1.2 and 10.1.3
Can you provide the event viewer log ? Also is the same issue seen while opening PDF in the Citrix Server ? Or it is mainly seen while Citrix Users accessing the published Reader app via Citrix Web URL ?

Verify Operation Failed and Other Issues

Adobe Reader X 10.1.1 is not working correctly on my computer which is running Windows XP Professional Service Pack 3. I have several symptoms.
1. If I am able to open a pdf file on my hard drive I get this error message:
   “Verify operation failed.”
    I hit OK and can read the document fine.
2. Many pdf files on my hard drive will not open. I get the error message:
   “There was an error opening this document. There was a problem reading this document (57).”
    I doubt the document is corrupt because I can email them to my coworkers and they can open it.
3. I can open any document inside of Internet Explorer 8. I get the error message:
   “There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again (0:104)”
    It wasn’t running and trying again won’t help. Usually I download the file and try to open it and if I can't I email to a co-worker and continue on. But now I need to fill out a form online that uses a pdf but I can't download it. What can I do now?
I have uninstalled and reinstalled twice with no success. I suspect the root problem is the “Verify operation failed.”
Any ideas.

I found a work around. It requires Foxit Reader, which is free.
Option 1: If you can't open a (.pdf) file in Internet Explorer because it insists on using Adobe Reader which fails on your computer for whatever reason, sometimes you can right click on the link itself and select “Save Target As” which will save the (.pdf) to your hard drive and then you can open it with Foxit Reader. If the file that it tries to save is something other than a (.pdf) such as an (.htm) then try option 2 below.
Option 2: If the “Save Target As” option isn't available, or it tries to save a file type (.htm), then click on the link anyway and let Adobe Reader try and open it. If it fails, the URL to the (.pdf) file should be in the Internet Explorer/Adobe Reader address bar. Copy the URL, open Foxit reader, go to File - Open, then paste the URL of the (.pdf) into the File Name textbox on the Open File pop-up screen and hit "Open".
I've tried changing the default (.pdf) reader to Foxit but sometimes the link to the (.pdf) still insists on using Adobe. Even if I try to use FireFox and Foxit together, there are some (.pdf) links that won't use anything but Adobe.
Sorry Adobe but I don't think it's your software, I think something is wrong with Windows on this computer.

MIC not verified # authentication-failed

Hi,
We are getting this error while trying to send messages from XI through AS2:
MIC not verified # authentication-failed
Can anybody please let us know the reason for this error.
Thanks in advance.
Best Regards,
Shweta

Hi Shabarish & Prateek,
Thanks a lot for the information.
I've also checked this information in Seeburger document and I agree this can be an issue with the Certificate.
But these scenarios were working fine for a long time,the Certificates are valid till 2016.
And the most important thing is,we get this error in 1 message out of 100-200,other messages are sent successfully.
So,if this is an issue with certificate,how is it possible that it affects only 1-2 messages not all.
I had never seen this error before and suddenly we have started getting such errors for a number of scenarios for last 15 days.
I believe ,there can be a problem with Certificate for 1 customer but if it is more than one ,it is hard to believe that all of them have problems with Certificates and at the same time.
I tried to search for notes related to this problem.
Is it something related to MIME content,as mentioned in note 1287778?
Kindly let me know.
Thanks.
Regards,
Shweta

Verify permissions failed: Framework unable to communicate with the Disk Management daemon

I'm experiencing problems with the Disk Management daemon on my MBPro Retina running Mountain Lion 10.8.2. I discovered it first when I tried to enable file vault and received the "Framework unable to communicate with the Disk Management daemon" error message.
So I started up Disk Utilities (which started fine) and tried to run Verify Disk Permissions. It failed with the following errror message:
"Verify permissions failed: Framework unable to communicate with the Disk Management daemon"
So I booted in to safe mode and tried Verify Disk Permissions again with the same results.
So I booted in to the recovery partition to run Disk Utilities. It ran fine and the Verify Disk Permissions found some errors which I then fixed.
I re-booted normally but am still experiencing the same behavior.
I have turned off my anti-virus (Sophos) to no effect.
I checked the console and found the following message:
12/6/12 3:27:02.828 PM Disk Utility[157]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It should not be used in new applications. Use convertRectToBacking: instead.
Thoughts or suggestions? Thanks!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Start managed server in a cluster fail

Hi,
I'm new in Oracle Weblogic, and I'm testing Weblogic 10.3.
I setup multiple IP in my laptop as follows:
10.0.0.183 devpc
10.0.2.183 node1
10.0.3.183 node2
And I configured a domain with Configuration Wizard as follows:
AdminServer
Listen Address:10.0.0.183
Listen Port:7001
ManagedServer_1
Machine:(none)
Cluster:Cluster_1
Listen Address:10.0.2.183
Listen Port:7001
ManagedServer_2
Machine:(none)
Cluster:Cluster_1
Listen Address:10.0.3.183
Listen Port:7001
When I started ManagedServer_1 with the command "*startManagedWebLogic.cmd ManagedServer_1 http://10.0.0.183:7001*",
managed server started to RUNNING state successfully, and after few seconds, I got these error.
+<Notice> <WebLogicServer> <devpc> <ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1239098617688> <BEA-000365> <Server state changed to RUNNING>+
+<Notice> <WebLogicServer> <devpc> <ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1239098617688> <BEA-000360> <Server started in RUNNING mode>+
+<Info> <J2EE> <devpc> <ManagedServer_1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239098617703> <BEA-160151> <Registered library Extension-Name: bea_wls_async_response (JAR).>+
+<Error> <Cluster> <devpc> <ManagedServer_1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239098635062> <BEA-000170> <Server ManagedServer_1 did not receive the multicast packets that were sent by itself>+
+<Critical> <Health> <devpc> <ManagedServer_1> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239098635062> <BEA-310006> <Critical Subsystem Cluster has failed. Setting server state to FAILED. Reason: Unable to receive self generated multicast messages>+
+<Critical> <WebLogicServer> <devpc> <ManagedServer_1> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239098635078> <BEA-000385> <Server health failed. Reason: health of critical service 'Cluster' failed>+
+<Notice> <WebLogicServer> <devpc> <ManagedServer_1> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239098635078> <BEA-000365> <Server state changed to FAILED>+
+<Error> <> <devpc> <ManagedServer_1> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239098635234> <BEA-000000> <+
+===== FULL THREAD DUMP ===============+
Tue Apr 07 18:03:55 2009
BEA JRockit(R) R27.6.0-50_o-100423-1.6.0_05-20080626-2105-windows-ia32
+"Main Thread" id=1 idx=0x4 tid=2208 prio=5 alive, in native, waiting+
+-- Waiting for notification on: weblogic/t3/srvr/T3Srvr@0x09E9E9E8[fat lock]+
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:485)
at weblogic/t3/srvr/T3Srvr.waitForDeath(T3Srvr.java:811)
+^-- Lock released while waiting: weblogic/t3/srvr/T3Srvr@0x09E9E9E8[fat lock]+
at weblogic/t3/srvr/T3Srvr.run(T3Srvr.java:459)
at weblogic/Server.main(Server.java:67)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
+.+
+.+
+.+
How to fix it?
Thanks in advance.

Hi,
I changed the settings as follows:
AdminServer
Listen Address:devpc
Listen Port:7001
ManagedServer_1
Machine:(none)
Cluster:Cluster_1
Listen Address:node1
Listen Port:7001
ManagedServer_2
Machine:(none)
Cluster:Cluster_1
Listen Address:node2
Listen Port:7001
Cluster_1
Cluster Address:node1:7001,node2:7001
The exceptions still remained, any suggestions would be appreciated.

Failsafe: verify cluster throws warnings

Hi,
We have Oracle failsafe 3.3.4 on top of oracle 10.2.0.4. Database and cluster are installed succesfully. Verify cluster is throwing the following warning messages.
** WARNING : FS-10658: The Oracle Management Agent software is not installed on any of the cluster nodes
** WARNING : FS-10658: The Oracle Intelligent Agent software is not installed on any of the cluster nodes
** WARNING : FS-10658: The Oracle Application Server software is not installed on any of the cluster nodes
Are the above 3 components required for the functioning of failsafe.
Please let me know. thanks in advance

Install the resource provider software so that it exists in the same Oracle home on each cluster node.
http://download.oracle.com/docs/html/A96683_01/messages.htm
www.orakhoj.com

I have been trying to get my daughter's iPod Facetime to work. But when we log on it won't let us. When we put in our ID and password it attempts to verify but fails and when we have create a new account and had confirmation email it still wont verify???

I have been trying to get my daughter's iPod Facetime to work. But when we log on it won't let us. When we put in our ID and password it attempts to verify but fails and when we have create a new account and had confirmation email back it still wont verify???

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

OS X 10.8 Acobat X Pro message: Verify operation failed.

Upgraded to Mountain Lion, and CS6 works fine except Acrobat Pro, constantly pops up with "verify operation failed. " message.
How do I resolve this?

im on macpro running 10.8.4 - had same issue over the last week as well after i updated my acrobat pro app. i believe as another post mentioned that adobe have added a 'verification process' to the update to ensure your software matches their records for whatever reason. i checked my adobe ID and they didnt exactly match. street name and number was slightly different. i rekeyed all my details so they matched 'exactly' to what i sent when i originally registered my adobe cs6. shut down mac at end of day - gave it 24hrs for my details to process through their system and this morning all good! - have opened and closed acrobat a number of times and not seen error message once. hopes this helps - you may have check back when you originally registered your product which could be back a few versions of the software.

Verify volume failed: Invalid request.

Hi,
I've just installed Bootcamp 4.0 on my MBP, installed Windows 7 - and all was working fine.
In the past 20 minutes I tried to boot into my Bootcamp but it failed and said that it couldn't find the operating system.
I then booted back into Lion and went to disk utilities and now my Bootcamp partition gives me:
Verify volume failed: Invalid request.
Any ideas what I can do?

You could also download and burn (slowly) Windows 8 ISO.
No I am not a bit-mind-reader but sometimes those Microsoft Windows Patch Tuesday do bite some systems, which is why restore check points, regular maintenance like CCleaner are handy.
Windows 8 Release Preview
http://msdn.microsoft.com/en-us/windows/apps/default
AIDA64 Extreme Edition
http://www.aida64.com
http://www.aida64.com/product/aida64-extreme-edition/overview
CCleaner
http://www.piriform.com/ccleaner
How to view error message:
From Control Panel-> Admin. Tools-> Event Viewer-> Windows logs:
Check Application and System Folders for Red highlit messages. Note that you can right-click clear these log folders.
Memtest
This is a step by step guide with audio and video to explain how to use memtest to see if your memory is defect:
Another thing to add is that some errors will not be found on the first pass, best to do at least 3 passes.
http://www2.corsair.com/training/how_to_memtest/

How to identify a cluster fail over?

Hello,
I am looking for event IDs which show that a cluster failed over. Which log? Application, System, Cluster, Others?
What initiated the fail over?
When the fail over happened?
etc...
Thanks,
DOm
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

Hi Sir,
Please refer to following article regarding how to create cluster log :
http://blogs.technet.com/b/askcore/archive/2010/04/13/understanding-the-cluster-debug-log-in-2008.aspx
http://blogs.technet.com/b/askcore/archive/2010/04/13/understanding-the-cluster-debug-log-in-2008.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Starting OCFS2 cluster fails

Hi All,
Trying to start cluster fails with:
[root@odlx01 init.d]# ./o2cb start raccls
Starting cluster raccls: Failed
Cluster raccls created
o2cb_ctl: Internal logic failure while adding node odlx01
Stopping cluster raccls: OK
OCFS2 is installed on a RedHat server:
Linux odlx01 2.6.9-42.ELsmp #1 SMP Wed Jul 12 23:27:17 EDT 2006 i686 i686 i386 GNU/Linux
The cluster.conf contains this:
node:
ip_port = 7777
ip_address = 10.91.3.2
number = 0
name = odlx01
cluster = raccls
cluster:
node_count = 1
name = raccls
Any ideas as to what is wrong, or where I could look to get a more detailed explanation of the error?
Thanks
Gary

How are you starting the managed servers. try running the command
from /MW_HOME/user_projects/domains/bifoundation_domain/bin
nohup sh ./startManagedWebLogic.sh bi_server1 http://localhost:7001> start_bi_server1.log &
and see how it goes. make sure you have set the boot.properties files under security folder so that it wont get failed looking for username and password.
hope it helps

Add GNS and Configure Oracle Infrastructure for Cluster failed

hi
i tried to install Oracle Grid 11g on Oracle Linux EnterPrise edition but i got the following error while
creating the Root.sh files.
*Add GNS 192.168.138.131 -d nisha.......failed
*Configure Oracle Infrastructure for Cluster failed.
plz help me out thanks in advance...

hi
thanks for reply.
if i did not give GNS name then i cannot install it because without GNS i am not able to install
is there anyway to install without GNS?
and if i want to install Typically then its also asking for Scan name
so plz guide me what is scan name and how to configure?
@Levi Pereira
because without that i am not able to install the software plz if i am wrong then
help me out how to install without GNS?
Edited by: nisha on May 17, 2011 4:56 AM

Verify Operation Failed

I just installed several CC apps on my MacBook Pro Retina. I did not install Acrobat XI.
When I start Acrobat Pro X (CS6 License) I get the message "Verify Operation Failed". If I click ok the message disappears and I can use Acrobat. But it periodically reappears.
What can I do to fix this? Is is related to the CC apps?
Thanks.

Hi Dennis - Here is a link to customer care and chat, who can help you troubleshoot. http://helpx.adobe.com/contact.html?product=creative-cloud
Thanks!

Verify Cluster failed

Similar Messages

Maybe you are looking for