VERIFY DISK with DISK UTILITY error PLEASE HELP

Hi every body today i used DISK UTILITY and i tryed to VERIFY DISK and i get the following error:
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Illegal name
Illegal name
Checking multi-linked files.
Checking multi-linked files.
g Catalog hierarchy.",0)
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
ed.",1)
Macintosh HD
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
is my hard drive ok ? is it going to die ?
PLEASE HELP
Thank you

Hi alexandros.c;
If after doing what Michael suggested you are still not able to repair your disk, you may need a more powerful such as DiskWarrior to repair it I have found that when the the disk has problems that the tools within OS X are unable to repair then DW usual does it.
If DW is not able to do it for you about the only other alternative is to reformat and start over again.
You should have a good backup before doing either of these solutions to protect yourself.
Allan

Similar Messages

  • Disk Utility Error-Please Help

    I tried to repair my hard disk. I couldn't repair straight away as the repair button was greyed out so I varified the HD. The message came up:
    *Disk Utility*
    *First Aid*
    *Disk Utility stopped verifying “Macintosh HD” because the following error was encountered:*
    *The underlying task reported failure on exit*
    The result of the varifacation was:
    *Verifying volume “Macintosh HD”*
    *Checking HFS Plus volume.*
    *Checking Extents Overflow file.*
    *Checking Catalog file.*
    *Incorrect size for file objects.nib*
    *(It should be 0 instead of 4514)*
    4514
    *ng multi-linked files.",0)*
    *Checking Catalog hierarchy.*
    *Checking Extended Attributes file.*
    *Checking volume bitmap.*
    *Checking volume information.*
    *he volume %@ needs to be repaired.",1)*
    *Macintosh HD*
    *Error: The underlying task reported failure on exit*
    *1 HFS volume checked*
    * Volume needs repair*
    Could someone please advise me how to fix this.
    Thank you.
    Simon

    You can only Repair Disk from a different boot volume so boot from your Tiger installer disk, select your language and then from the menu>Utilities>Disk Utility. select your hard drive and then Repair Disk. If Disk Utility can't repair it you will need a stronger utility like DiskWarrior to rebuild the directory.

  • ITunes can't connect to my new Airport Express even when light is green and see it with Airport utility. Please help!

    Hi,
    I'm using iTunes with my iMac and like listen the my music collection in my Hi-Fi which is 20 m far from the Mac. Because of the distance in my flat and other obstacles I'm using a power line. I installed the Airport Express through the Utility and no problems: Airport light is green and configured. iTunes air see it but it can't connect to it.
    I made several resets, plugged and unplugged the power and no change, but Airport light is always green, see it in iTunes and the Utility.
    This is driving my crazy!
    Any ideas ?
    Thanks

    Hi Jim,
    Thanks for reacting to my question.
    Yes, I did reboot the router, unplugged and replugged the Airport Express with ro result .... iTunes cannot connect to the Airport Express. I'm using power line to carry Ethernet because between my Mac and AE there are about 20 meters, but problems started since I updated AE version to version 3 ...
    It is also non sense because the Utility sees it and then suddenly disappears ! but light remians green ...
    I think there might be something wrong with the new firmware versions ...
    Carlos

  • My install of maverick failed as disk is damaged and cannot repaired. I tried to erase disk but got error that disk cannot be umounted. Please help! Thank you very much.

    My install of maverick failed as disk is damaged and cannot repaired. I tried to erase disk but got error disk cannot be unmounted. Please help. What can i do? Thank you very much.

    First have you got a backup of your data? If not try to get one now while you have some access to the drive. The drive is probably faulty and will need to be replaced, without the backup you risk losing the data.
    Have you a bootable external USB drive with Mavericks on it, if so boot from that and try and repair or erase the drive and reinstall Mavericks.
    If you don't have Mavericks on an external drive,  boot from you Leopard DVD ( I am presumimg your profile is correct) and run Disk Utility from there, you may be able to erase the drive and reload Leopard. You can then install Mavericks. Even if all that works you will most likely need a new drive in the near future.

  • Windows - No Disk Error - Please help!

    Windows - No Disk Error - Please help!
    Hi,
    I have the following set up:
    * Lenovo T-61p
    * Windows XP Pro, SP 3
    * HP Photosmart 8250 printer (with nothing plugged into the various card readers, and USB slot in the printer)
    I am getting the following error:
    Windows - No Disk
    Exception Processing Message 0xc0000013 Parameters 0x75CE023C
    0x84C40C84 0x75CE023C
    I have done a lof experimenting and thru process of  elimination, and believe I have determined that this only happens when the HP Photosmart 8250 printer is plugged in to the USB slot of the computer.
    I can stop it from happening by safely removing hardware, and removing the drive that the 8250 creates on your computer when you plug it in.  In my case, this is drive E.  I'm guessing if there was something in the the various card readers, and USB slot in the printer, that's what those would be, but I don't those use those functions of the printer.
    I understand there is more at work than simply the printer, because I did not used to get this error, so some software changed as well, that is scanning all ports, and finding a drive that has no disk, and producing the error.
    A simple google search finds a lot people all over the world having this problem, and are solving it in different ways, because the suspected source is different: Norton, HP, etc.
    I have tried everything I have read, and the only thing that works was my own idea, of manually safely removing the drive the printer creates each time I plug in the printer.
    Anyone every any better, more permanent solutions?  Or know what the real root of the problem is?  What is scanning all the drives and being showing an error message because it found an empty drive?
    Thanks and Happy Holidays/New Year!

    I've been getting the same error on my 4G nano for the past week. I've had my nano for about a month and the first few weeks were fine. Tried it on 2 different computers (Vista and XP) and same problem. Tried it on a 3rd (XP) and it started ok. Problem started coming back after a day.
    I was able to find a quick fix though. I noticed that sometimes the message says something like "iexplore.exe... no disk..." even if I don't even use IE. What I do is end iexplore.exe on task manager before running iTunes and syncing my nano. I don't get the error whenever I do this, but one drawback is that the contents of my nano suddenly pops up in a window - even when disk use is not enabled.
    I've reset/restored my nano dozens and dozens of times to make sure it's clean. Leads me to believe it's a driver issue. Either that or I have a friggin malware problem I can't seem to find.
    I'll be posting updates every now and then. I'm no expert so I'm hoping an Apple expert also steps in to give some input.

  • How do you archive a disk with AirPort Utility version 6?

    Has anyone figured how to Archive Disks with AirPort utility version 6?  I can see both drives but it refuses to do an Archive in version 6?  (I don't even see a button to do so in the UI?)

    Please download and install AirPort Utility 5.6 for Mac OS X Lion
    Keep both 6.0 and 5.6 on your Mac (6.0 cannot be deleted).

  • My ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

    my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

    Hey erinoneill24,
    Thanks for using Apple Support Communities.
    Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
    iPod displays "Use iTunes to restore" message
    http://support.apple.com/kb/ts1441?viewlocale=it_it
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
    If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
    Have a nice day,
    Mario

  • I purchased a IMac in Feb later I added a Seagate ext. hard drive. On April 29 I received an errors that the ext. Drive may be a read only and not backing up files. I'm unable to check disk permission or correct errors. Help would be appreciated.

    I purchased a IMac in Feb later I added a Seagate ext. hard drive. On April 29 I received an errors that the ext. Drive may be a read only and not backing up files. I'm unable to check disk permission or correct errors. Help would be appreciated.

    Click on the hard drive on the desktop, then File > Get Info. What does it say about permissions?  If this is just a data drive you may want to consider "ignore ownership on this volume".
    Otherwise I can only say I have not been reading good things about Seagate drives recently.  I have some of their rock-solid ones from about 10 years ago (still running well), but now...?

  • Cant download itunes, because ' there is an error with windows installer package' please help?

    cant download itunes, because ' there is an error with windows installer package' please help?

    I am getting the same message when I try to install the latest version of iTunes, I am running on Windows Vista Home Premium. I have tried so many different things to try to correct this and have now completly unistalled it from my laptop..... Now I have no iTunes what-so-ever on it and still can't install it. I found an older versin of iTunes and it installed without any problems, but I can't access it because my library was created on a newer version! Talk about frustrated..... WE NEED HELP!!!!!

  • HT4623 I have updated my iphone with the current software but it is showing you need to connect to  of itunes to activate your phone, when i did that it is continuously showing an error.please help me to get through.

    I have updated my iphone with the current software but it is showing you need to connect to  of itunes to activate your phone, when i did that it is continuously showing an error.please help me to get through.
    Kindly Activate my phone.

    Rajan Gupta wrote:
    ...it is continuously showing an error.
    See here  >  http://support.apple.com/kb/TS3424
    Also see this discussion.
    https://discussions.apple.com/message/21189708

  • I need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help

    i need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help if any one has the drivers or knows were i can download them

    Doug...
    If you don't have it for reference, the manual might come in handy > US/Boot_Camp_Install-Setup.pdf
    After it loads, Command + F to find information regarding the drivers.

  • My iPod used to be signed in with my moms apple ID but now I have my own. When I opened IMessage it wanted me to sign in, but on the last step it said, "your email can't be verified since its already in use" please help I want to use IMessage.

    My iPod used to be signed in with my moms apple ID but now I have my own. When I opened IMessage it wanted me to sign in, but on the last step it said, "your email can't be verified since its already in use" please help I want to use IMessage.

    Hi Kanemelinda8833,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Associating and verifying email addresses with your Apple ID
    http://support.apple.com/kb/HE68
    Also, make sure you have signed out of your Mom's Apple ID and are signed in with your own Apple ID on this device.
    Click on the link to see more details and screenshots. 
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Sign out of your Apple ID on all iOS devices, in the following locations:
    Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
    Sign in to your Apple ID on your device.
    When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At
    Cheers!
    Judy

  • HT201210 cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?

    cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?

    If you mean updae server
    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem
    Otherwise what server are you talking about

  • I can not connect my i phon with my pc it shows athorised computer when i am trying to do authorised process the process done but again i connect my phon again show this errore please help me to solve my prob....

    i can not connect my i phon with my pc it shows athorised computer when i am trying to do authorised process the process done but again i connect my phon again show this errore please help me to solve my prob....

    I have clicked on the  connect button, but it brings up the same There is a problem connecting,  and I have also tried SMB://
    i tried pinging the ip address with in termial and it times out.  
    From my windows PC and I can access my MacBook Air just fine,

  • I am geting following error please help

    ERROR-
    RPC Fault faultString="HTTP request error" faultCode="Server.Error.Request" faultDetail="Error: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2032: Stream Error. URL: http://www.nature.com/principles/webservice/login" errorID=2032]. URL: http://www.nature.com/principles/webservice/login"]
    code-
    operation = new Operation(null, "login");
      operation.url = "login";
      argsArray = new Array("login_id", "login_password", "unique_machine_id");
      operation.argumentNames = argsArray;
      operation.method = "POST";
      operation.serializationFilter = filter;
      operations.push(operation);
      public function login(loginId:String, loginPassword:String, uniqueMachineId:String):AsyncToken
           trace(loginId, loginPassword, uniqueMachineId);
           var _internal_operation:AbstractOperation = _service.getOperation("login");
           var _internal_token:AsyncToken = _internal_operation.send(loginId, loginPassword, uniqueMachineId);
           return _internal_token;
    login service is being called from server that is in java-
    package com.nature.ebook.components.auth
      import com.nature.ebook.data.UserInfo;
      import com.nature.ebook.services.CallStatus;
      import com.nature.ebook.services.IEBookService;
      import com.nature.ebook.services.XMLServiceParser;
      import flash.events.EventDispatcher;
      import flash.events.IEventDispatcher;
      import mx.controls.Alert;
      import mx.rpc.AsyncToken;
      import mx.rpc.Fault;
      [ManagedEvents("authSuccess, authFail")]
      public class AuthCommand extends EventDispatcher
      public function AuthCommand(target:IEventDispatcher=null)
      [Inject]
      public var service:IEBookService;
      [Inject]
      public var auth:AuthModel;
      //  Methods
      * This command dispatches  event AuthenticationEvent.AUTH_FAIL when the service return failt
      * @param fault Fault
      public function error(fault:Fault):void
      trace(fault);
      var e:AuthenticationEvent = new AuthenticationEvent(AuthenticationEvent.AUTH_FAIL, null, null, CallStatus.getServerFaultCall());
      dispatchEvent(e);
      * This command dispatches event when the service return rezult Array
      * @param result Array
      * if cs.success <code>true </code> dispatch AuthenticationEvent.AUTH_SUCCESS
      * if cs.success <code>false</code> dispatch AuthenticationEvent.AUTH_FAIL
      public function result(result:*):void
      if (result)
      var cs:CallStatus = XMLServiceParser.getCallStatus(result);
      if (cs.success)
      var us:UserInfo = XMLServiceParser.getUserInfo(result);
      var e:AuthenticationEvent = new AuthenticationEvent(AuthenticationEvent.AUTH_SUCCESS, us, null, cs);
      dispatchEvent(e);
      else
      e = new AuthenticationEvent(AuthenticationEvent.AUTH_FAIL, null, null, cs);
      dispatchEvent(e);
      public function execute(event:AuthenticationEvent):AsyncToken
      return service.login(event.user.loginId, event.magicWord, event.user.uniqueMachineId);

    Sorry for the confusion. After starting the WLS 6.0 server, use your browser
    to launch the console, verify that the Frobable EJB is correctly deployed as
    frobtarget with the correct class path specified. The 6.0 JAAS sample is
    trying to invoke on examples.security.acl.Frobable, make sure this is the
    deployed instance. This is an error in the JAAS example SampleAction.java
    file since the JAAS sample actually builds examples.security.jaas.Frobable,
    this bug will be corrected in service pack 1 which will be available
    shortly.
    nancy coelho <[email protected]> wrote in message
    news:3a9ee0af$[email protected]..
    Hi! I am new to JAAS and also to Weblogic server6.0. I am trying to run
    JAAS sample and geting the following error . please help
    Thanks,
    Nancy
    E:\bea\wlserver6.0\samples>java examples.security.jaas.SampleClient
    t3://localho
    st:7001
    Using Configuration File: Sample.policy
    Login Module Name: examples.security.jaas.SampleLoginModule
    Login Module Flag: required
    username: ncoelho
    password: prabhala
    javax.naming.NameNotFoundException: Unable to resolve frobtarget.Resolved:
    '' U
    nresolved:'frobtarget' ; remaining name ''
    at
    weblogic.rmi.internal.AbstractOutboundRequest.sendReceive(AbstractOut
    boundRequest.java:90)
    at
    weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
    ef.java:247)
    at
    weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
    ef.java:225)
    at
    weblogic.jndi.internal.ServerNamingNode_WLStub.lookup(ServerNamingNod
    e_WLStub.java:121)
    at
    weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:323)
    at javax.naming.InitialContext.lookup(InitialContext.java:350)
    at examples.security.jaas.SampleAction.run(SampleAction.java:61)
    at javax.security.auth.Subject.doAs(Subject.java:80)
    at examples.security.jaas.SampleClient.main(SampleClient.java:114)
    Failed to frob
    E:\bea\wlserver6.0\samples>

Maybe you are looking for

  • Can't update iPhoto after loading yosemite

    Uploaded Yosemite and can't update iPhoto.  message is that the app was bought by another user or cancelled.  Not true.  What should I do?

  • How to copy/move Portal database from one machine to another?

    I am receiving a ORA-22973 error (size of object identifier exceeds maxmum size allowed) on the wwsec_enabler_config_info$ table when attempting to import my entire "portal30" schema from one database to another on different Windows NT Servers. Backg

  • XL Reporter not working for MS Office 2007

    Hi We have SAP B1-2005 with (PL35, XL Reporter 6.80.01), after installing XL Reporter we got the error as Microsoft Excel is required but not installed, for which we had browsed the forums and got the below said solutions 1. Uninstall XLR completely.

  • Syntac Error in JMS Spec.

    If someone has already found this error: Sorry, i didn't know. I've searched the forum before i posted this message. In the JMS Specification, Chapter 9.1.3: Source code (wrong): Connection connection; connection = ConnectionFactory.createConnection(

  • Lint to BPS fro WEb Template

    Dear friends, I need a huge helps from you all as based on my requirement. Is it possible to give a link from the web template to the BPS dialoge function where the user can enter the values? Also from the web template chart when i click on a particu