Verify LUN ID's on Solaris 9 System
Hi Experts,
SAN Team just added LUN's to a Solaris 9 system. How can I verify that LUN's are added? Where can I find the LUN ID's?
Let me know if you need more information.
Sunil.
luxadm probe - will all the fabric disk details
Note: If this is the first time lun is being provisioned to the said server, then there could be additional configuration required on the server side specific to your SAN environment.
Similar Messages
-
I'm trying to install iTunes on my pc and I get the error message "Service Apple Mobile Device Failed to Start. Verify you have sufficient privileges to start system services.
What do I need to do to get iTunes to install?Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
1) Could not start up os x
2) Only could start bootcamp
3) Tried resetting nvram
4) Could not start even in bootcamp
5) Verify disk says …. Verifying volume “Macintosh HD”
Error: Live file system repair is not supported
6) Installed maverick on USB drive
7) Boot from USB drive. Tried verifying HD: Volume header needs minor repair. The volume Recovery HD was found corrupt and needs to be repaired. Verifying volume “Macintosh HD”: Error: live file system repair is not supported.
8) The terminal code says
9) Last login: Wed Feb 11 14:09:47 on console
10) xxxx-MacBook:~ xxxx$ diskutil list
11) /dev/disk0
12) #: TYPE NAME SIZE IDENTIFIER
13) 0: GUID_partition_scheme *160.0 GB disk0
14) 1: EFI EFI 209.7 MB disk0s1
15) 2: Apple_HFS Macintosh HD 80.1 GB disk0s2
16) 3: Apple_Boot Recovery HD 650.0 MB disk0s3
17) 4: Microsoft Basic Data 50.0 GB disk0s4
18) /dev/disk1
19) #: TYPE NAME SIZE IDENTIFIER
20) 0: GUID_partition_scheme *15.6 GB disk1
21) 1: EFI EFI 209.7 MB disk1s1
22) 2: Apple_HFS BOOT 14.8 GB disk1s2
23) 3: Apple_Boot Recovery HD 650.0 MB disk1s3
24) Saeedehs-MacBook:~ saeedehmirbagheri$ diskutil cs list
25) No CoreStorage logical volume groups found
26) Saeedehs-MacBook:~ saeedehmirbagheri$ sudo gpt -vv -r show /dev/disk0
27) Password:
28) gpt show: /dev/disk0: mediasize=160041885696; sectorsize=512; blocks=312581808
29) gpt show: /dev/disk0: PMBR at sector 0
30) gpt show: /dev/disk0: Pri GPT at sector 1
31) gpt show: /dev/disk0: Sec GPT at sector 312581807
32) start size index contents
33) 0 1 PMBR
34) 1 1 Pri GPT header
35) 2 32 Pri GPT table
36) 34 6
37) 40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
38) 409640 156394528 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
39) 156804168 1269544 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
40) 158073712 56853648
41) 214927360 97652736 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
42) 312580096 1679
43) 312581775 32 Sec GPT table
44) 312581807 1 Sec GPT header
45) xxxx-MacBook:~ xxxx$ sudo fdisk /dev/disk0
46) Disk: /dev/disk0 geometry: 19457/255/63 [312581808 sectors]
47) Signature: 0xAA55
48) Starting Ending
49) #: id cyl hd sec - cyl hd sec [ start - size]
50) ------------------------------------------------------------------------Thank you -
I booted from external USB. The diskutil list output is from OS x booting from the USB, which shows the following:
Saeedehs-MacBook:~ saeedehmirbagheri$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *160.0 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS Macintosh HD 80.1 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
4: Microsoft Basic Data 50.0 GB disk0s4
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *15.6 GB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_HFS BOOT 14.8 GB disk1s2
3: Apple_Boot Recovery HD 650.0 MB disk1s3
Saeedehs-MacBook:~ saeedehmirbagheri$ diskutil cs list
No CoreStorage logical volume groups found
I am not able to use target disk mode because I don't have firewire/thunderbolt ports. -
When downloading itunes to my pc, get error message 'Apple mobile device could not be installed - verify you have sufficient privileges to install system services'
i am forced to abort/cancel. Can anyone help please?Me too. And if someone comes back on here with the same solution of "uninstall and re-install", please provide further advice after you have done that 3 times and the program still has the same problem in addition to the "failure to load the C runtime library" R6034 issue. I have removed itunes 3 times however I do not have permission to remove the program files/apple file and the uninstall doesn't remove it.
You're not alone buddy.
Frustrated. -
When I try to reload Itunes I get this error message "Service' Apple Mobile Device Failed to start. Verify you have sufficient priveleges to start system. Anyone know the solution to this issue?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I'm trying to install itunes, but it's saying "service-Apple mobile device failed to start, verify you have sufficient privileges to start system services. What do I do?
The most complete instructions for resolving the issues with the new iTunes is in the user tip: https://discussions.apple.com/docs/DOC-6562
-
when installing itunes I received the following error "service Apple Mobile Device failed to start, verify you have sufficient privileges to start system services"
Me too. And if someone comes back on here with the same solution of "uninstall and re-install", please provide further advice after you have done that 3 times and the program still has the same problem in addition to the "failure to load the C runtime library" R6034 issue. I have removed itunes 3 times however I do not have permission to remove the program files/apple file and the uninstall doesn't remove it.
You're not alone buddy.
Frustrated. -
iTunes fails to load. Message is "Service Apple Mobile Device failed to start. Verify you have sufficient privileges to start system services." Never had this problem before trying to install this upgrade. How do I fix this?
Dave, same problem here. And I did go in as admin to Administrative Tools, Services, Apple Mobile Devices and tried restarting the service. It seems there is a bug with the newest update, period. All of the normal "easy" steps don't work. Before I remove all of Apple's programs, including Bonjour....I'm running a full system scan.
But the answer will be to remove all of the Apple stuff, then reboot, then use whatever utility you have to remove all temp files...then go download and install it again. This has worked for several people (I read the thread before posting). Win 7 64bit. It just seems that Apple did not thoroughly test this new version. Period.
If Apple reads this...I have many computers...and whenever Apple wants to update something...it just about stops everything else that is going on. Total memory hog, even with 16G RAM and dual quad core processors. It has to learn to play nice with others.
After the scan and I'm sure an hour or two of work...I'll re-post.
Of course if you do image back-ups, as I do, you can simply restore your drive to its previous state and run the previous version of iTunes, declining the update, until Apple gets it right. Depending on the size of your drive, this could take hours. It is a matter of choice, of course. -
Apple mobile Device failed to start. Verify you have sufficient privilege to start system"
Hi, i have trouble with itunes. With the new update, i was unable to use my itunes. "Apple mobile Device failed to start. Verify you have sufficient privilege to start system". After that, i uninstall/install Itunes...and same message. Any help?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services. I do not know what to do. I am the only user on my HP Pavillion laptop. Help!
Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
says apple mobile device failed to start. verify you have sufficient priveledges to start system services. its always updated before.
See section 5 of TS1538: iOS: Device not recognized in iTunes for Windows or alternatively this uninstall & reinstall iTunes post.
tt2 -
I'm trying to re-install Itunes. I keep getting an error message that says....
"Apple Moblie Device failed to start, Verify you have sufficiant privileges to start system services"
Does anyone know what this means, or how to fix?
ThanksHello pongo19,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Close iTunes and disconnect the iPhone, iPad, or iPod touch.
Click the Windows Start button .
In the Start Search field type Services.
In the Programs section of the search results, Click "Services".
Select Apple Mobile Device and click Stop the service as shown below:
After the service has stopped, click Start the service.
After the Apple Mobile Device service has started again, open iTunes and connect the device.
Set the Apple Mobile Device Service Startup type to Automatic
Remove and reinstall iTunes and AMDS
Best of luck,
Mario -
How do i verify i have sufficient privileges to start system services?
How do I verify I have sufficient privileges to start system services? This comes up as an error when trying to install the newest iTunes version. It says Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
When I run disk utility, verify permissions I get "WARNING SUID file system/Library/Coreservices/Remotemanagement/ARDAgent.app/Contents/MacOS/ARDAge nt has been modified
Please read Disk Utility's Repair Disk Permissions messages that you can safely ignore.
Roger -
About Solaris Operating System Platform for E-Business Suite 11.5.10.2
Hello All,
I have installed Solaris Operating System 10 (x86) on Sun Server V40z which has AMD processor.
I have media pack of Oracle E-Business Suite 11.5.10.2 for Solaris Operating System (SPARC).
Q. 1 ) is above media pack will work on my sever?
I was checking this on http://edelivery.oracle.com
but I am not able to find Platform Solaris Operating System (x86) for E-Business Suite 11.5.10.2
Why it is not available ?
Regards
Chirag Patel
NairobiQ. 1 ) is above media pack will work on my sever?No.
I was checking this on http://edelivery.oracle.com
but I am not able to find Platform Solaris Operating
System (x86) for E-Business Suite 11.5.10.2
Why it is not available ?Because it is not certified.
Certify - Oracle's Certification Matrices
http://www.oracle.com/technology/support/metalink/index.html
Maybe you are looking for
-
Moved drive to USB Port on Time Capsule and TM no longer sees backups
I moved my FireWire attached HD from a direct attachment to my Mac Pro to attached via the USB port on my Time Capsule. Time Machine now wants to start over, and does not see the previous backups. The destination drive name did not change, other than
-
Help in profiling a complex application needed
Hi, I have a rather complex, general, problem here I would like to solve using dtrace so any hint, advise, similar experience etc would be more than welcome. Basically, my company has created a complex database system for acquisition and management o
-
AP check format for US Bank (JPMorgan) using MICR
Hi, What format should we use to print checks for an american bank? We want to print the checks entirely (not pre-printed). Thanks,
-
CC apps for Windows Surface RT?
I am trying to download Photoshop on the desktop of my Windows Surface RT but I keep getting a messagee the I can only download it on a PC, which it is. When I called technical support I was told to download photoshop touch which is only available fo
-
MacBook Pro logs out repeatedly on its own at startup
Hopefully this question is posted in the appropriate location. When I start my MacBook Pro, I am asked to insert my password and login. Upon entering my password, the computer will display the desktop, and applications will begin to open. About 10 se