Verify that SQL Server Reporting Services is installed properly and that it is running.
I am trying to install DPM 2010 on Windows 2008 R2. Running through installation and the server that I'm installing DPM to will also host the SQL instance and Reporting instance. Pretty much choosing all the defaults.
Installation gets to reporting portion and fails. It says that I need to verify that Reporting Services is running. The exact error is:
Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components copied during installation.
For details, click the Error tab.
DPM Setup has not configured Reporting Services to use Secure Sockets Layer. For more information on how to configure the Report Server for Secure Sockets Layer (SSL) connections, see Configuring Report Server for Secure Sockets Layer (http://go.microsoft.com/fwlink/?LinkId=178289)
Report configuration failed.
Verify that SQL Server Reporting Services is installed properly and that it is running.
ID: 812
It is running and working, I can go to the URL and see Reports installed. It grabbed a server certificate which is valid and binds that to 443. I have tried this as well with the certificate removed.
Here is the relative portion of the DPM 2010 log:
[6/25/2010 10:30:01 AM] * Exception : => System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException: Exception of
type 'Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException' was thrown.
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException.UnableToConfigureAccount(ErrorCode errorCode)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateUserAccount(String server, String password, Boolean create)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.SetReportingPassword(String password, String server, String instanceName, String dbConnectionString)
*** Mojito error was: PasswordTooShort; 0; None
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.ConfigureReporting(Boolean isRemoteDb, String rsMachineName, String rsInstanceName, String installerPath)
[6/25/2010 10:30:01 AM] * Exception : => Report configuration failed.Verify that SQL Server Reporting Services is installed properly and that it is running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception --->
Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException: exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException:
Exception of type 'Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException' was thrown.
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException.UnableToConfigureAccount(ErrorCode errorCode)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateUserAccount(String server, String password, Boolean create)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.SetReportingPassword(String password, String server, String instanceName, String dbConnectionString)
*** Mojito error was: PasswordTooShort; 0; None
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.ConfigureReporting(Boolean isRemoteDb, String rsMachineName, String rsInstanceName, String installerPath)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.ConfigureReporting(Boolean isRemoteDb, String rsMachineName, String rsInstanceName, String installerPath)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.ConfigureReporting(String reportserverConfigFilePath, Boolean existingDB, Boolean isOemSetup, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
*** Mojito error was: ReportDeploymentFailed; 0; None
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.ConfigureReporting(String reportserverConfigFilePath, Boolean existingDB, Boolean isOemSetup, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.ConfigureReporting(Boolean isRemoteDb)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
*** Mojito error was: ReportDeploymentFailed; 0; None
[6/25/2010 10:30:07 AM] *** Error : Report configuration failed.
Verify that SQL Server Reporting Services is installed properly and that it is running.
ID: 812
[6/25/2010 10:30:07 AM] Information : Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components
copied during installation.
For details, click the Error tab.
DPM Setup has not configured Reporting Services to use Secure Sockets Layer. For more information on how to configure the Report Server for Secure Sockets Layer (SSL) connections, see Configuring Report Server for Secure Sockets Layer (http://go.microsoft.com/fwlink/?LinkId=178289)
Hello,
The real problem is the error UnableToConfigureAccount and *** Mojito error was: PasswordTooShort; 0; None
The reason is due to the new password complexity on Windows 2008 which states the following:
Password must meet complexity requirements
This security setting determines whether passwords must meet complexity requirements.
If this policy is enabled, passwords must meet the following minimum requirements:
Not contain the user's account name or parts of the user's full name that exceed two consecutive characters
Be at least six characters in length Contain characters from three of the following four categories:
English uppercase characters (A through Z)
English lowercase characters (a through z)
Base 10 digits (0 through 9)
Non-alphabetic characters (for example, !, $, #, %)
Complexity requirements are enforced when passwords are changed or created.
Default:
Enabled on domain controllers.
Disabled on stand-alone servers.
Note: By default, member computers follow the configuration of their domain controllers.
Please use a more secure password adhering to the above criteria and DPM should install fine.
Regards, Mike J [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights.
Similar Messages
-
Hi All,
I'm working on what appears to be a permissions issue with SSRS in a multi-tenented SharePoint 2013 environment.
As part of my troubleshooting I've ignored the multitenented web application for the time being and stood up a dedicated web application with it's own host header called reporting.<domain>.local. I've created a site collection and added a Doc Library
called Reporting.. And then the content types, made sure the features are up and everything tests ok. I mention this because it's not that I can't get this working.. I can't get this working in a Web Application configured for multi-tenancy running Host Named
Site Collections.
When I try redoing the above on a Tenant site I get the following:
Sorry, something went wrong The permissions granted to user '<domain>\bprice' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user '<DOMAIN>\bprice'
are insufficient for performing this operation.
Correlation ID: 7f23ef9c-4b6a-7007-7e6f-0b32c731f7ed
The problem here is that my account is a sysadmin in SQL, a local admin on all servers, a domain admin in AD and finally a Farm Admin in SharePoint. Access denied on my account is crazy. So it's unlikely to be perms in the traditional sence, more likely a denial
by implication (as though I have not been granted access to something)
When filtering the ULS Logs for that correlation ID I see the following log entries:
WcfReceiveRequest: LocalAddress: 'http://homsssrs001. <domain>.local:32843/04560e49d2664b64bc12d9ce7bc9f885/ReportingWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sqlserver/reporting/2011/06/01/ReportServer/Management/GetDataSourceContents'
MessageId: 'urn:uuid:44f03f7a-69b3-426c-bcb6-1088f0ad560c'
Non-OAuth request. IsAuthenticated=False, UserIdentityName=, ClaimsCount=0
Cannot find site lookup info for request Uri http://homsssrs001:32843/04560e49d2664b64bc12d9ce7bc9f885/ReportingWebService.svc.
Call to GetDataSourceContentsAction(https://shared.<domain>.local/sites/bf/Reporting/terst1.rsds).
The current site is not in the SiteSubscription of the context site. SiteSubscriptionId: for current site = 96a49a95-8256-4585-9627-98206351efe3, for context site =
Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: , Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user '<DOMAIN>\bprice' are insufficient for performing this operation.;
A quick google on what I consider the most important of the above log errors (#5 mentioning Sitesubscription of the context site) returns:
http://thesharepointfarm.com/2014/10/reporting-services-feature-pack/
We aren't using feature packs at the moment. As far as I understand it all features are available to all subscriptions.
Has anyone seen this issue? Can anyone point in the correct direction? There must be a config that's specific to SSRS and Multi-tenancy that I've overlooked but I genuinely can't get to the bottom of this.
Kind Regards & Many Thanks
BrettMorning Trevor, please find attached - if you can, any advice would be greatly appreciated.
Kind Regards
Brett
03/05/2015 09:19:07.94 w3wp.exe (0x0148)
0x0DD4
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (ExecuteWcfServerOperation). Parent No
03/05/2015 09:19:07.94 w3wp.exe (0x0148)
0x0DD4
SharePoint Foundation Topology
e5mb Medium
WcfReceiveRequest: LocalAddress: 'http://homsssrs001.<domain>.local:32843/04560e49d2664b64bc12d9ce7bc9f885/ReportingWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sqlserver/reporting/2011/06/01/ReportServer/Management/ListItemTypes'
MessageId: 'urn:uuid:cdd5f8d1-cb0e-4e4b-8716-f62dd1aef75b'
81b6ef9c-0b28-7007-7e6f-0e85d9c7097f
03/05/2015 09:19:07.94 w3wp.exe (0x0148)
0x0DD4
SharePoint Foundation Micro Trace
uls4 Medium
Micro Trace Tags: 0 nasq,0 e5mb 81b6ef9c-0b28-7007-7e6f-0e85d9c7097f
03/05/2015 09:19:07.94 w3wp.exe (0x0148)
0x0DD4
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=0.4954
81b6ef9c-0b28-7007-7e6f-0e85d9c7097f
03/05/2015 09:19:08.02 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (ExecuteWcfServerOperation). Parent No
03/05/2015 09:19:08.02 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Topology
e5mb Medium
WcfReceiveRequest: LocalAddress: 'http://homsssrs001.<domain>.local:32843/04560e49d2664b64bc12d9ce7bc9f885/ReportingWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sqlserver/reporting/2011/06/01/ReportServer/Management/ListItemTypes'
MessageId: 'urn:uuid:e1f178b0-a85e-48e1-9b70-3fddd26e8790'
81b6ef9c-eb2c-7007-7e6f-0e4ff9cf4e76
03/05/2015 09:19:08.02 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Micro Trace
uls4 Medium
Micro Trace Tags: 0 nasq,0 e5mb 81b6ef9c-eb2c-7007-7e6f-0e4ff9cf4e76
03/05/2015 09:19:08.02 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=0.4614
81b6ef9c-eb2c-7007-7e6f-0e4ff9cf4e76
03/05/2015 09:19:08.02 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (ExecuteWcfServerOperation). Parent No
03/05/2015 09:19:08.02 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Topology
e5mb Medium
WcfReceiveRequest: LocalAddress: 'http://homsssrs001.<domain>.local:32843/04560e49d2664b64bc12d9ce7bc9f885/ReportingWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sqlserver/reporting/2011/06/01/ReportServer/Management/GetDataSourceContents'
MessageId: 'urn:uuid:a36edfc2-6593-44da-aa56-cb7052abd5f7'
81b6ef9c-eb2c-7007-7e6f-0e4ff9cf4e76
03/05/2015 09:19:08.02 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Authentication Authorization
agb9s Medium
Non-OAuth request. IsAuthenticated=False, UserIdentityName=, ClaimsCount=0
81b6ef9c-eb2c-7007-7e6f-0e4ff9cf4e76
03/05/2015 09:19:08.03 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation General
adyrv High
Cannot find site lookup info for request Uri http://homsssrs001:32843/04560e49d2664b64bc12d9ce7bc9f885/ReportingWebService.svc.
81b6ef9c-eb2c-7007-7e6f-0e4ff9cf4e76
03/05/2015 09:19:08.03 w3wp.exe (0x0148)
0x11EC
SQL Server Reporting Services Report Server Catalog
00000 Medium
Call to GetDataSourceContentsAction(https://shared.<domain>.local/sites/bf/Reporting/test.rsds).
81b6ef9c-eb2c-7007-7e6f-0e4ff9cf4e76
03/05/2015 09:19:08.05 w3wp.exe (0x0148)
0x11EC
SQL Server Reporting Services Report Server Catalog
00000 Unexpected
The current site is not in the SiteSubscription of the context site. SiteSubscriptionId: for current site = 96a49a95-8256-4585-9627-98206351efe3, for context site =
81b6ef9c-eb2c-7007-7e6f-0e4ff9cf4e76
03/05/2015 09:19:08.05 w3wp.exe (0x0148)
0x11EC
SQL Server Reporting Services Report Server Catalog
00000 Unexpected
Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: , Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user '<domain>\bprice' are insufficient for performing this
operation.; 81b6ef9c-eb2c-7007-7e6f-0e4ff9cf4e76
03/05/2015 09:19:08.05 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Micro Trace
uls4 Medium
Micro Trace Tags: 0 nasq,0 e5mb,0 agb9s,8 adyrv
81b6ef9c-eb2c-7007-7e6f-0e4ff9cf4e76
03/05/2015 09:19:08.05 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=32.8138
81b6ef9c-eb2c-7007-7e6f-0e4ff9cf4e76
03/05/2015 09:19:08.13 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (ExecuteWcfServerOperation). Parent No
03/05/2015 09:19:08.13 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Topology
e5mb Medium
WcfReceiveRequest: LocalAddress: 'http://homsssrs001.<domain>.local:32843/04560e49d2664b64bc12d9ce7bc9f885/ReportingWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sqlserver/reporting/2011/06/01/ReportServer/Management/ListItemTypes'
MessageId: 'urn:uuid:102cbef7-8be7-4781-87f8-1729748105ca'
81b6ef9c-bb35-7007-7e6f-007a34676ded
03/05/2015 09:19:08.13 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Micro Trace
uls4 Medium
Micro Trace Tags: 0 nasq,0 e5mb 81b6ef9c-bb35-7007-7e6f-007a34676ded
03/05/2015 09:19:08.13 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=1.4432
81b6ef9c-bb35-7007-7e6f-007a34676ded
03/05/2015 09:19:08.27 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (ExecuteWcfServerOperation). Parent No
03/05/2015 09:19:08.27 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Topology
e5mb Medium
WcfReceiveRequest: LocalAddress: 'http://homsssrs001.<domain>.local:32843/04560e49d2664b64bc12d9ce7bc9f885/ReportingWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sqlserver/reporting/2011/06/01/ReportServer/Management/ListItemTypes'
MessageId: 'urn:uuid:791edd35-00a7-4756-a013-915aabc504ea'
81b6ef9c-9b39-7007-7e6f-01d1e9208dd3
03/05/2015 09:19:08.27 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Micro Trace
uls4 Medium
Micro Trace Tags: 0 nasq,0 e5mb 81b6ef9c-9b39-7007-7e6f-01d1e9208dd3
03/05/2015 09:19:08.27 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=0.4652
81b6ef9c-9b39-7007-7e6f-01d1e9208dd3
03/05/2015 09:19:08.28 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (ExecuteWcfServerOperation). Parent No
03/05/2015 09:19:08.28 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Topology
e5mb Medium
WcfReceiveRequest: LocalAddress: 'http://homsssrs001.<domain>.local:32843/04560e49d2664b64bc12d9ce7bc9f885/ReportingWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sqlserver/reporting/2011/06/01/ReportServer/Management/GetDataSourceContents'
MessageId: 'urn:uuid:4ecdbd2f-f202-4bfb-bfd0-015b7719d1dd'
81b6ef9c-9b39-7007-7e6f-01d1e9208dd3
03/05/2015 09:19:08.28 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Authentication Authorization
agb9s Medium
Non-OAuth request. IsAuthenticated=False, UserIdentityName=, ClaimsCount=0
81b6ef9c-9b39-7007-7e6f-01d1e9208dd3
03/05/2015 09:19:08.30 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation General
adyrv High
Cannot find site lookup info for request Uri http://homsssrs001:32843/04560e49d2664b64bc12d9ce7bc9f885/ReportingWebService.svc.
81b6ef9c-9b39-7007-7e6f-01d1e9208dd3
03/05/2015 09:19:08.30 w3wp.exe (0x0148)
0x11EC
SQL Server Reporting Services Report Server Catalog
00000 Medium
Call to GetDataSourceContentsAction(https://shared.<domain>.local/sites/bf/Reporting/test.rsds).
81b6ef9c-9b39-7007-7e6f-01d1e9208dd3
03/05/2015 09:19:08.30 w3wp.exe (0x0148)
0x11EC
SQL Server Reporting Services Report Server Catalog
00000 Unexpected
The current site is not in the SiteSubscription of the context site. SiteSubscriptionId: for current site = 96a49a95-8256-4585-9627-98206351efe3, for context site =
81b6ef9c-9b39-7007-7e6f-01d1e9208dd3
03/05/2015 09:19:08.30 w3wp.exe (0x0148)
0x11EC
SQL Server Reporting Services Report Server Catalog
00000 Unexpected
Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: , Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user '<domain>\bprice' are insufficient for performing this
operation.; 81b6ef9c-9b39-7007-7e6f-01d1e9208dd3
03/05/2015 09:19:08.30 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Micro Trace
uls4 Medium
Micro Trace Tags: 0 nasq,0 e5mb,0 agb9s,5 adyrv
81b6ef9c-9b39-7007-7e6f-01d1e9208dd3
03/05/2015 09:19:08.30 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=21.2802
81b6ef9c-9b39-7007-7e6f-01d1e9208dd3
03/05/2015 09:19:08.41 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (ExecuteWcfServerOperation). Parent No
03/05/2015 09:19:08.41 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Topology
e5mb Medium
WcfReceiveRequest: LocalAddress: 'http://homsssrs001.<domain>.local:32843/04560e49d2664b64bc12d9ce7bc9f885/ReportingWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sqlserver/reporting/2011/06/01/ReportServer/Management/ListItemTypes'
MessageId: 'urn:uuid:caaecd7e-386e-436d-8276-a589cd7eac43'
81b6ef9c-4b46-7007-7e6f-05cd3c364914
03/05/2015 09:19:08.41 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Micro Trace
uls4 Medium
Micro Trace Tags: 0 nasq,0 e5mb 81b6ef9c-4b46-7007-7e6f-05cd3c364914
03/05/2015 09:19:08.41 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=0.4707
81b6ef9c-4b46-7007-7e6f-05cd3c364914
03/05/2015 09:19:08.49 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (ExecuteWcfServerOperation). Parent No
03/05/2015 09:19:08.49 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Topology
e5mb Medium
WcfReceiveRequest: LocalAddress: 'http://homsssrs001.<domain>.local:32843/04560e49d2664b64bc12d9ce7bc9f885/ReportingWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sqlserver/reporting/2011/06/01/ReportServer/Management/ListItemTypes'
MessageId: 'urn:uuid:c0b1675d-6244-46c7-9e50-904e5067cc30'
81b6ef9c-3b4a-7007-7e6f-0ff7141ffd6a
03/05/2015 09:19:08.49 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Micro Trace
uls4 Medium
Micro Trace Tags: 0 nasq,0 e5mb 81b6ef9c-3b4a-7007-7e6f-0ff7141ffd6a
03/05/2015 09:19:08.49 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=0.4514
81b6ef9c-3b4a-7007-7e6f-0ff7141ffd6a
03/05/2015 09:19:08.50 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (ExecuteWcfServerOperation). Parent No
03/05/2015 09:19:08.50 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Topology
e5mb Medium
WcfReceiveRequest: LocalAddress: 'http://homsssrs001.<domain>.local:32843/04560e49d2664b64bc12d9ce7bc9f885/ReportingWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sqlserver/reporting/2011/06/01/ReportServer/Management/GetDataSourceContents'
MessageId: 'urn:uuid:7845718a-b878-40f3-8698-270b377db7bc'
81b6ef9c-3b4a-7007-7e6f-0ff7141ffd6a
03/05/2015 09:19:08.50 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Authentication Authorization
agb9s Medium
Non-OAuth request. IsAuthenticated=False, UserIdentityName=, ClaimsCount=0
81b6ef9c-3b4a-7007-7e6f-0ff7141ffd6a
03/05/2015 09:19:08.50 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation General
adyrv High
Cannot find site lookup info for request Uri http://homsssrs001:32843/04560e49d2664b64bc12d9ce7bc9f885/ReportingWebService.svc.
81b6ef9c-3b4a-7007-7e6f-0ff7141ffd6a
03/05/2015 09:19:08.50 w3wp.exe (0x0148)
0x11EC
SQL Server Reporting Services Report Server Catalog
00000 Medium
Call to GetDataSourceContentsAction(https://shared.<domain>.local/sites/bf/Reporting/test.rsds).
81b6ef9c-3b4a-7007-7e6f-0ff7141ffd6a
03/05/2015 09:19:08.52 w3wp.exe (0x0148)
0x11EC
SQL Server Reporting Services Report Server Catalog
00000 Unexpected
The current site is not in the SiteSubscription of the context site. SiteSubscriptionId: for current site = 96a49a95-8256-4585-9627-98206351efe3, for context site =
81b6ef9c-3b4a-7007-7e6f-0ff7141ffd6a
03/05/2015 09:19:08.52 w3wp.exe (0x0148)
0x11EC
SQL Server Reporting Services Report Server Catalog
00000 Unexpected
Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: , Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user '<domain>\bprice' are insufficient for performing this
operation.; 81b6ef9c-3b4a-7007-7e6f-0ff7141ffd6a
03/05/2015 09:19:08.52 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Micro Trace
uls4 Medium
Micro Trace Tags: 0 nasq,0 e5mb,0 agb9s,0 adyrv
81b6ef9c-3b4a-7007-7e6f-0ff7141ffd6a
03/05/2015 09:19:08.52 w3wp.exe (0x0148)
0x11EC
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=12.5869
81b6ef9c-3b4a-7007-7e6f-0ff7141ffd6a
03/05/2015 09:19:11.72 w3wp.exe (0x0148)
0x12E8
SharePoint Foundation Database
7t61 High
[Forced due to logging gap, cached @ 03/05/2015 09:19:03.46, Original Level: Verbose] {0}
03/05/2015 09:19:11.72 w3wp.exe (0x0148)
0x12E8
SharePoint Foundation Database
7t61 High
[Forced due to logging gap, Original Level: Verbose] {0} -
SQL Server Reporting Services Add-In disappered but SSRS Service Application is there
Good Day,
I am using SQL Server 2012 SP1, and SharePoint 2013 SP1.
In the SharePoint Central Admin, Reporting Services Add-In is missing but in the "Manage Service Application" page, SQL Server Reporting Services Application is appearing and I have created SQL Server Reporting Services Application. And, in
the "Services on Server page", the "SQL Server Reporting Services Service" is started.
I would like to configure SSRS on SharePoint Central Admin for my SSRS reports.
Please help me, how to get Reporting Services Add-in the SharePoint Central Admin.
Thanks in advanceHope you have followed all steps below:
http://blogs.msdn.com/b/biblog/archive/2012/12/04/installing-and-configuring-sql-reporting-services-on-sharepoint-2013.aspx
http://technet.microsoft.com/en-us/library/ms144289.aspx
http://technet.microsoft.com/en-us/library/gg492278.aspx -
Dear All,
I'm working on reporting of Project Server 2010, while configuring SQL SERVER REPORTING SERVICES faced issue after two complete days of troubleshooting along with this gone through plenty of forums, unable to figure out any solution. So finally posting on
technet in order to find solution.
ISSUE/PROBLEM:
At initial configured the SQL REPORTING CONFIGURATION to sharepoint integrated database (SQL SERVER is installed on seperate machine), change the service to Domain Account and also installed sharepoint add in on server story was fine at this point. Furthur
moving to SHAREPOINT ADMIN console and while configuring the Sharepoint Integrated Reporting continuously facing this error:
Failed to establish connection with report server. . . . (Snapshot is attached for your further reference).
My point of concern is that whenerver i try to open the REPORT SERVER URL on project server machine it prompts me to enter username and password but whenever i insert the domain credentails it didnt accept though it can be accesible by using the credentials
of Local Admin of sql server machine. So i wana come to know whether its permission issue if yes then where i should mention the domain credentials.?
REGARDS DANISH DANIEDear Paul,
I am able to open the URL (http://psdb/ReportServer )using
domian credential and page open with these contents
Reporting Services Error
The configuration parameter SharePointIntegrated is set to True but Share Point Object Model cannot be loaded
Second,
Configured the SPN on domain controller , performed the steps required to change the AUTHENTICATION in rsreportserver.config
file also done the registry settings to disable the loop back settings.
Same error still ! .... what should i do now ???
REGARDS DANISH DANIE -
SQL Server Reporting Services installed on a production database server used to support JD Edwards EnterpriseOne. What performance isses can arise. Is it recommended. What are the pros and cons
Hi hazelannc,
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated. Thank you for your understanding and support.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Unable to insert sql server reporting services report viewer webpart
Hello,
We are trying to add a SQL Server Reporting Services Report Viewer and when we click add we get the following error message
The file you imported is not valid. Verify that the file is a Web Part description file (*.webpart or *.dwp) and that it contains well-formed XML.
Does anyone know what the fix to this is?Hi，
The Report Viewer Web Part is a custom Web Part that is installed by the Reporting Services Add-in for SharePoint Products and associated with report definition (.rdl) files that are processed by a Microsoft SQL Server Reporting Services report
server.
To install the Web Part, you must run Setup for the Reporting Services Add-in. You should not install or uninstall the Web Part independently. It is part of the add-in and can only be installed through the add-in setup package. The Report Viewer Web Part
file name is ReportViewer.dwp. It is located in the Program Files\Common Files\Microsoft Shared\web server extensions\15\template\features\reportserver folder and should not be moved to other folders.
To use the Web Part, you must have installed and configured the Reporting Services Add-in and configured the report server for SharePoint integration.
For more information,you can have a look at the blog:
http://msdn.microsoft.com/en-us/library/jj219068.aspx
http://msdn.microsoft.com/en-us/library/aa905871.aspx
http://msdn.microsoft.com/en-us/library/bb522800.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support -
SQL Server Reporting Services FAQ
Hi All,
This thread is a summary of the Frequently Asked Questions on SQL Server Reporting Services. We consolidate them and post here for your reference. If you have any further questions, please kindly start a new thread so that more community members, MVPs, and MSFTs can join the discussion and share their ideas. Thanks for your understanding.
Part I: SQL Server Reporting Services General Topics
1. How to migrate SQL Server 2008 Reporting Services to another computer?
2. How to combine connecting string via parameter?
3. How to install a 32-bit version of SQL Server 2005 Reporting Services on a computer that is running a 64-bit version of Windows?
4. Error of EXECUTE permission denied on object 'xp_sqlagent_notify'.
5. Security consideration for anonymous access to Report Server.
6. How to create a custom report template in Reporting Services?
7. Does Reporting Services support horizontal tables which have fixed rows and dynamic columns?
8. How to reset the page number back to 1 every time the report gets a group break?
9. How to open the drill- through report in a new browser window?
10. How to verify the version of SQL Server?
11. How to use multiple datasets?
12. How to upgrade report from SQL Server 2000 to SQL Server 2005?
13. Out of memory error when exporting reports to Excel.
14. How to improve PDF quality of the report exported in Reporting Services 2005?
15. How to enable the Select All option for a multi-value parameter?
Part II: SQL Server Reporting Services SharePoint Integrated Mode Topics
1. How to deploy reports to SQL Server Reporting Services in SharePoint Services integrated mode?
2. How to integrate SQL Server Reporting Services and SharePoint Services?
3. How to refer the reports on the Report Server in SharePoint Services?
4. How to manage user to view reports in SharePoint integrated mode?
5. What information is needed when posting questions regarding SharePoint integrated mode?
6. Is Report Builder available in SharePoint Integrated Mode?
PLEASE NOTE: Microsoft does not offer formal support for the communities you'll find here. Instead, our role is to provide a platform for people who want to take advantage of the global community of Microsoft customers and product experts. Microsoft may monitor content to ensure the accuracy of the information you'll find, but any information provided by Microsoft staff is offered "AS IS" with no warranties, and no rights are conferred. You assume all risk for your use.
Microsoft Online Community Support1. Question 3: How to install a 32-bit version of SQL Server 2005 Reporting Services on a computer that is running a 64-bit version of Windows?
Answer:
To install the 32-bit version of Reporting Services on a computer that is running the 64-bit version of IIS 6.0, we can follow these following steps:
1. Uninstall the 64-bit version of Reporting Services.
Note: Side-by-side installations of 32-bit versions of Reporting Services and 64-bit versions of Reporting Services are not supported.
2. Run the Dotnetfx64.exe file to manually install the .NET Framework.
The Dotnetfx64.exe file is in the Tools\redist\2.0 folder on the SQL Server 2005 Setup media. To download the Dotnetfx64.exe file, visit the following Microsoft Web site:
http://go.microsoft.com/fwlink/?LinkId=70186
3. In IIS Manager, click Web Server Extensions.
4. In the Details pane, right-click ASP.NET V2.0.50727, and then click Allow.
5. Right-click Web Sites, and then click Properties.
6. Click the ISAPI Filters tab.
7. In the Filter Name column, click ASP.NET_2.0.50727, and then click Edit.
8. Replace C:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\aspnet_filter.dll with C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\aspnet_filter.dll.
Note: The Aspnet_filter.dll file in the C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ folder is a 32-bit version of the file.
9. Click OK two times, and then close IIS Manager.
10. At a command prompt, run the following command:
cscript %SystemDrive%\inetpub\AdminScripts\adsutil.vbs set w3svc/AppPools/Enable32bitAppOnWin64 1
11. Install the 32-bit version of Reporting Services.
12. After setup is complete, open IIS Manager, and then click Web Server Extensions.
13. In the Details pane, right-click ASP.NET V2.0.50727 (32-bit), and then click Allow.
To install the 32-bit version of Reporting Services on a computer that is running the 64-bit version of IIS 7.0, follow these steps:
1. Enable ASP.NET and IIS before you install Reporting Services.
2. Open a command prompt. To do this, click Start, point to All Programs, point to Accessories, right-click Command Prompt, and then click Run as administrator.
3. In the User Account Control dialog box, click Continue.
4. Copy the following script:
cscript %SystemDrive%\inetpub\AdminScripts\adsutil.vbs set w3svc/AppPools/Enable32bitAppOnWin64 1
5. In the upper-left corner of the Command Prompt window, right-click the command prompt icon, click Edit, and then click Paste.
6. Press ENTER to run the script.
7. Install the 32-bit version of Reporting Services. You must apply SQL Server 2005 Service Pack 2 (SP2) after you install Reporting Services in Windows Vista. If you install SQL Server 2005 Express Edition with Advanced Services, you can run SQL Server 2005 Express Edition with Advanced Services SP2.
For more information, visit the following Microsoft Web site:
Microsoft SQL Server 2005 Express Edition with Advanced Services Service Pack 2
http://go.microsoft.com/fwlink/?LinkID=63922
8. Reset IIS.
9. Configure the report server for local administration. To access the report server and Report Manager locally, follow these steps:
a. Start Microsoft Internet Explorer.
b. On the Tools menu, click Internet Options.
c. Click Security.
d. Click Trusted Sites.
e. Click Sites.
f. Under Add this website to the zone, type http://servername.
g. If you are not using HTTPS for the default site, click to clear the Require server certification (https:) for all sites in this zone check box.
h. Click Add.
i. Repeat steps f and g to add http://localhost, and then click Close.
10. This step lets you start Internet Explorer either to localhost or to the network computer name of the server for both Report Server and Report Manager.
a. Create role assignments that explicitly grant you full-permissions access. To do this, follow these steps:
b. Start Internet Explorer by using the Run as administrator option. To do this, click Start, click All Programs, right-click Internet Explorer, and then click Run as administrator.
c. Start Report Manager.
d. Note By default, the Report Manager URL is http://servername/reports. If you are using SQL Server 2005 Express Edition with Advanced Services SP2, the Report Manager URL is http://servername/reports$sqlexpress. If you are using a named instance of Reporting Services, the Report Manager URL is http://servername/reports$InstanceName
e. On the Home page, click Properties.
f. Click New Role Assignment.
g. Type a Windows user account in the following format: domain\user
h. Click to select the Content Manager check box.
i. Click OK.
j. In the upper-right corner of the Home page, click Site Settings.
k. Click Configure site-wide security.
l. Click New Role Assignment.
m. Type a Windows user account in the following format: domain\user
n. Click to select the System Administrator check box.
o. Click OK.
p. Close Report Manager.
11. Open Report Manager in Internet Explorer without using the Run as administrator option.
Microsoft Online Community Support -
SQL Server Reporting Services SharePoint Integrated mode - Power View is not supported
Hi there,
My environment is the following:
SharePoint Server 2013
SQL Server 2012 SP1 Enterprise edition
I am getting the following message when trying to open BISM item with PowerView icon:
"The feature: "Power View" is not supported in this edition of Reporting Services."
My problem is that the first time I installed SQL Server Reporting Services SharePoint integrated, I used the SQL Server 2012 Standard edition ISO. But then I learned that Power View is only available with Enterprise and BI editions. So I uninstalled Reporting
Services Add-in from Control Panel, Reporting Services from the installation media and deleted the three Reporting DBs in the SharePoint DB server.
Then I used SQL Server 2012 SP1 Enterprise media to install again Reporting Services but not sure why I am still getting the message:
"The feature: "Power View" is not supported in this edition of Reporting Services."
Anyone can advice me what could be the problem? Maybe I have not complete deleted the previous SQL Server Reporting Service Share Point integrated mode from the previous installation? What would be the proper way to uninstall Reporting Services?
Any help will be welcome.
Thanks and best regards,
JossHi Joss,
I am in the same situation,
SQL Server was installed in the standard mode because of that the powerview option is not working.
I have changed teh edition using maintenance --> upgrade edition. the sql server components like DB engine, SSAS and integration services are now showing in enterprise edition. The reporting services are installed from the application end still showing
as the reporting services are standard.
we reinstalled the reporting services but still persists the issue.
suggest me is there any work around to fix the issue other than reinstalled the whole SQL Server.
Thanks
Ramu -
SQL Server Reporting Services Service - missing in Central Admin
Hi,
I am following "Install Reporting Services SharePoint Mode for SharePoint 2013" at
http://msdn.microsoft.com/en-us/library/jj219068(v=sql.110).aspx#bkmk_install_SSRS_sharedservice .
I have a WFE, APP and SQL server. We have SQL Server 2012 SP1. Central Admin is installed on the APP server.
I installed the Reporting Services Add-In on the WFE using rssharepoint.msi per "Install or Uninstall the Reporting Services Add-in for SharePoint"
http://technet.microsoft.com/en-us/library/aa905871(v=sql.110).aspx and then ran
Install-SPRSService and Install-SPRSServiceProxy
successfully on the WFE.
I cannot see "SQL Server Reporting Services Service" in Central Admin.
(Central Admin is on the APP server)
get-spserviceinstance -all |where {$_.TypeName -like "SQL Server Reporting*"} | Start-SPServiceInstance finds the service but does not successfully provision it.
The SharePoint LOG just shows: Updating SPPersistedObject SPServiceInstanceJobDefinition Name=job-service-instance-8efb2291-4f12-4fea-bb52-63e86f486e6e. Version: -1 Ensure: False, HashCode: 49732161, Id: 81b73567-58c0-4e94-9072-be5ab39077af, Stack:
I tried installing the "Reporting Services Add-in for SharePoint" again using
rssharepoint.msi on the APP server (since it has central admin), and the install rolls back. The error after running
rsCustomAction.exe /i from the command line - per
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/880b77ac-3228-40ce-99dc-12b0ff0eb46a/reporting-services-add-in-for-sharepoint-installation-interrupted?forum=sqlreportingservices
Failed to call GetTypes on assembly Microsoft.AnalysisServices.SPAddin, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91. Could not load file or assembly Microsoft.AnalysisServices.SPClient, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
or one of its dependencies. The system cannot find the file specified.
also saw: SharePoint Web Application content files could not be propagated because no Web Applications could be detected or they are off-line. Which may be normal.
Q. which servers should I be installing the "Reporting Services Add-in for SharePoint"?
Q. how can I fix the errors I see?
macrelHi Ketak. Thank you for replying. I already followed your instructions - specifically -
You do not see the SQL Server Reporting Services service in SharePoint Central Administration after installing SQL Server 2012 SSRS in SharePoint mode
I get the following error when I run rssharepoint.msi on the APP sever (where Central Admin is installed). I have to run this other wise
Install-SPRSService and Install-SPRSServiceProxy
are not recognized as commands on that server.
Failed to call GetTypes on assembly Microsoft.AnalysisServices.SPAddin, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91. Could not load file or assembly Microsoft.AnalysisServices.SPClient, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
or one of its dependencies. The system cannot find the file specified.
macrel -
SQL Server Reporting Services in SQL Server Express 2012
I installed SQL Server Express 2012 but cannot find SQL Server Reporting Services.
Is it possible to use SSRS in SQL Server Express 2012?
If possible, where do I get so that I could install it and make environment?Hi ,
Did you get a chance to look into the below link
http://blogs.msdn.com/b/mvpawardprogram/archive/2014/03/10/adding-sql-server-express-2012-advanced-services-to-existing-development-environment.aspx
Best Regards Sorna -
TF400525: Make sure the SQL Server Reporting Services service for this instance is running.
I am trying to install TFS 2012 update 4 on single server installation.
I am getting below error:
TF400525: Make sure the SQL Server Reporting Services service for this instance is running.Hi CFSA,
Thanks for your post.
If you want install TFS 2012 Server with Reporting Server, you must ensure the provided Reporting Services is running first.
As Daniel said, please check that in SQL Server Configuration Manager to ensure Reporting Services is installed and running.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I have installed Sharepoint 2013 along with SQL 2012 SP1 in a single server installation. over this i have installed SQL server reporting service. however when i click on any reports i get the following error:"
(An attempt has been made to use a data extension 'ADS' that is ei
ther not registered for this report server or is not supported in this edition of Reporting Services. (rsDataExtensionNotFound)Hi,
It seems the Reporting Services Add-in was not configured for Connected Mode.
Installing the Reporting Services Add-in after SharePoint installation
1. Install the SSRS Add-in according to the steps at
http://go.microsoft.com/fwlink/p/?LinkID=164654&clcid=0x409
2. Activate the SSRS feature according to the steps at
http://msdn.microsoft.com/en-us/library/bb677366(SQL.105).aspx
To install the Reporting Services Add-in for Connected Mode
1. Install the SSRS Add-in either before or after SharePoint Server installation according to the session above.
2. Configure Report Server Integration in SharePoint Central Administrationhttp://msdn.microsoft.com/en-us/library/bb326213(SQL.105).aspx
3. Modify the C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config file on the Reporting Services server. Under the <Data> node, under the <Extension> node, add the
ADS data extension. For example:
<Extension Name="ADS" Type="Microsoft.Office.Access.Reports.DataProcessing.AdsConnection, Microsoft.Office.Access.Server.DataServer, Version=14.0.0.0, Culture=Neutral, PublicKeyToken=71e9bce111e9429c"/> -->
4. Modify the rssrvpolicy file on RS server.
See the below link for details:
Use Access Services with SQL Reporting Services: Installing SQL Server 2008 R2 Reporting Services Add-In (SharePoint Server 2010)
http://technet.microsoft.com/en-us/library/ee662542
ERROR: An attempt has been made to use a data extension 'SQL' that is not registered for this report server
http://blogs.msdn.com/b/selvar/archive/2009/03/21/error-an-attempt-has-been-made-to-use-a-data-extension-sql-that-is-not-registered-for-this-report-server.aspx
Please let me know if the information helps.
Thanks.
Tracy Cai
TechNet Community Support -
DPM 2010 installation failure (SQL-server Reporting Services Problem)
Hi everyone,
The last 2 days I have been trying to get DPM 2010 installed on a DC. I know this is not recommended, but for our company with the current setup it's the only way to do it.
I have been reading some Microsoft articles (http://technet.microsoft.com/en-us/library/ff399416.aspx) about doing this but I fail to do so.
I have made all of the right service accounts (I guess) and am doing everything in the guide but still get the same error message over and over again:
Setup has detected that the installation of Reporting Services is not correctly configured or no instance of Reporting Services is linked to DPM2010 of SQL Server
I just can't get my head around it. This is the error message when I try to install DPM 2010 using an existing SQL-database which I have configured in the SQL 2008-server sp1 installation.
I have enclosed some screenshots so you could maybe check some things that are not correct? Hopefully we can get this issue resolved, because it's driving me crazy to be honest!
Physical server which is ADC and where I need to install SQL-server and DPM: VMBACKUP
The service account for DPM is: DPMSQLSvcsAcct
Also have another service account: DPMR$VMBACKUP
I have also enclosed the error log located in C:\DPMLogs\This is the DOM error log:
MSI (s) (D0:4C) [14:59:59:626]: Windows Installer reconfigured the product. Product Name: Microsoft Application Error Reporting. Product Version: 12.0.6015.5000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 0.
MSI (s) (D0:4C) [14:59:59:627]: Deferring clean up of packages/files, if any exist
MSI (s) (D0:4C) [14:59:59:628]: MainEngineThread is returning 0
MSI (s) (D0:D8) [14:59:59:631]: RESTART MANAGER: Session closed.
MSI (s) (D0:D8) [14:59:59:631]: No System Restore sequence number for this installation.
=== Logging stopped: 27/03/2012 14:59:59 ===
MSI (s) (D0:D8) [14:59:59:632]: User policy value 'DisableRollback' is 0
MSI (s) (D0:D8) [14:59:59:632]: Machine policy value 'DisableRollback' is 0
MSI (s) (D0:D8) [14:59:59:632]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (D0:D8) [14:59:59:632]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D0:D8) [14:59:59:633]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D0:D8) [14:59:59:633]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (D0:D8) [14:59:59:634]: Restoring environment variables
MSI (s) (D0:D8) [14:59:59:634]: Destroying RemoteAPI object.
MSI (s) (D0:90) [14:59:59:635]: Custom Action Manager thread ending.
MSI (c) (9C:04) [14:59:59:636]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (9C:04) [14:59:59:637]: MainEngineThread is returning 0
=== Verbose logging stopped: 27/03/2012 14:59:59 ===
[27/03/2012 14:59:59] Information : MsiInstallProduct returned 0.
[27/03/2012 14:59:59] Information : End install.
[27/03/2012 14:59:59] Information : **************************************************************************************
[27/03/2012 14:59:59] Information : **************************************************************************************
[27/03/2012 14:59:59] Information : Start Inspect.
[27/03/2012 14:59:59] Information : Check processor configuration.
[27/03/2012 14:59:59] Information : Query WMI provider for configuration of processor. (Namespace : \\localhost\root\cimv2).
[27/03/2012 14:59:59] Information : Query for WMI class. (Query : SELECT * FROM Win32_Processor).
[27/03/2012 15:00:00] Data : Clock speed of processor = 2500
[27/03/2012 15:00:00] Data : Manufacturer of processor = GenuineIntel
[27/03/2012 15:00:00] Information : Check the amount of RAM.
[27/03/2012 15:00:00] Information : Query WMI provider for configuration of memory. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:00] Information : Query for WMI class. (Query : SELECT * FROM Win32_OperatingSystem).
[27/03/2012 15:00:00] Data : Found memory = 14677964
[27/03/2012 15:00:00] Data : Total amount of memory = 14677964
[27/03/2012 15:00:00] Information : Check the version of Microsoft Management Console on the machine.
[27/03/2012 15:00:00] Data : Version of Microsoft Management Console on the machine = 6.1.7600.16385
[27/03/2012 15:00:00] Data : Required version of Microsoft Management Console = 5.2.3790.2560
[27/03/2012 15:00:00] Information : MMC correct version is detected.
[27/03/2012 15:00:00] Information : Check if this machine is part of active directory.
[27/03/2012 15:00:00] Data : Looking for Active Directory node = LDAP://RootDSE
[27/03/2012 15:00:00] Information : Active Directory is detected on this machine.
[27/03/2012 15:00:00] Information : Check if the machine role is Domain Controller.
[27/03/2012 15:00:00] Information : Query for WMI class. (Query : SELECT * FROM Win32_ComputerSystem).
[27/03/2012 15:00:00] Data : Localhost in Computer role = 4
[27/03/2012 15:00:00] * Warning : DPM Setup has detected that this computer is a domain controller.Make sure that you have followed the steps given in the link below before proceeding with the DPM Setup.
[27/03/2012 15:00:00] Information : The machine role is a Domain Controller.
[27/03/2012 15:00:00] Information : Check if Volsnap QFE is applied.
[27/03/2012 15:00:00] Information : Volsnap QFE is applied on this system.
[27/03/2012 15:00:00] Information : Check if Logical Disk Manager (LDM) QFE is applied.
[27/03/2012 15:00:00] Information : LDM QFE is applied on this system.
[27/03/2012 15:00:00] Information : Check if KB962975 QFE is applied.
[27/03/2012 15:00:00] Information : KB962975 QFE is applied on this system.
[27/03/2012 15:00:00] Information : Check if KB975759 QFE is applied.
[27/03/2012 15:00:00] Information : KB975759 QFE is applied on this system.
[27/03/2012 15:00:00] Information : Check if KB955543 QFE is applied.
[27/03/2012 15:00:00] Information : KB955543 QFE is applied on this system.
[27/03/2012 15:00:00] Information : Detect if Powershell is installed.
[27/03/2012 15:00:00] Data : Installed Version of Windows Powershell. = 6.1.7600.16385
[27/03/2012 15:00:00] Data : Minimum Required version of Windows Powershell. = 6.0.6002.18111
[27/03/2012 15:00:00] Information : Required version of Powershell software is installed on this system.
[27/03/2012 15:00:00] Information : Check if reboot is required because of Dot Net installation.
[27/03/2012 15:00:00] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\DotNetRequiredReboot.
[27/03/2012 15:00:00] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\DotNetRequiredReboot is absent.
[27/03/2012 15:00:00] Information : Reboot is not required.
[27/03/2012 15:00:00] Information : Detect if SIS Service is running.
[27/03/2012 15:00:00] Information : Detect if SIS Filter service SIS is running.
[27/03/2012 15:00:00] Information : SIS Service SIS is running on this system.
[27/03/2012 15:00:00] Information : Check the version of Windows Installer on the machine.
[27/03/2012 15:00:00] Data : Version of Windows Installer on the machine = 5.0.7601.17514
[27/03/2012 15:00:00] Data : Required version of Windows Installer = 4.5.6001.18000
[27/03/2012 15:00:00] Information : Windows Installer correct version is detected.
[27/03/2012 15:00:00] Information : Check if Removable Storage Service (Rsm) is disabled or not.
[27/03/2012 15:00:00] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
[27/03/2012 15:00:00] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='NtmsSvc').
[27/03/2012 15:00:01] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: NtmsSvc : Service not found
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectConfigs.CheckRsmServiceConfig(InspectContext context)
[27/03/2012 15:00:01] Information : Check if reboot is required.
[27/03/2012 15:00:01] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired.
[27/03/2012 15:00:01] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired is absent.
[27/03/2012 15:00:01] Information : Reboot is not required.
[27/03/2012 15:00:01] Information : Check if SQL Server 2008 is installed.
[27/03/2012 15:00:01] Information : Query WMI provider for SQL Server 2008. (Namespace : \\VMBACKUP\root\Microsoft\SqlServer\ComputerManagement10).
[27/03/2012 15:00:01] Information : Query for WMI class. (Query : Select * from SqlServiceAdvancedProperty where ServiceName='{0}' and PropertyName='Version').
[27/03/2012 15:00:01] Information : SQL Server 2008 MSDPM2010 instance is not present on this system.
[27/03/2012 15:00:01] *** Error : Setup has detected that the instance provided is not a SQL Server 2008 instance. Please provide a SQL Server 2008 instance having Service Pack 1 installed.
[27/03/2012 15:00:01] Information : Check if SQL Server 2008 Tools is installed.
[27/03/2012 15:00:01] Information : SQL Server 2008 Tools is installed
[27/03/2012 15:00:01] Information : Check if SQL Server 2008 SP1 is applied.
[27/03/2012 15:00:01] Information : Query WMI provider for SQL Server 2008 SP1. (Namespace : \\VMBACKUP\root\Microsoft\SqlServer\ComputerManagement10).
[27/03/2012 15:00:01] Information : Query for WMI class. (Query : Select * From SqlServiceAdvancedProperty Where ServiceName='MSSQL$MSDPM2010' AND PropertyName = 'SPLEVEL').
[27/03/2012 15:00:02] Information : Sql Server 2008 Service Pack Level is 0
[27/03/2012 15:00:02] Information : SQL Server 2008 SP1 is not present on MSDPM2010 instance of this system.
[27/03/2012 15:00:02] *** Error : Setup has detected that SQL Server 2008 Service Pack 1 has not been installed on the VMBACKUP\MSDPM2010 instance.Install SQL Server 2008 Service Pack 1 or higher and try again.
[27/03/2012 15:00:02] Information : Check SQL Server Agent service configuration.
[27/03/2012 15:00:02] Data : SQL Server instance name = MSDPM2010
[27/03/2012 15:00:02] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
[27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='SQLAgent$MSDPM2010').
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: SQLAgent$MSDPM2010 : Service not found
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectConfigs.CheckSqlAgentServiceConfig(InspectContext context)
[27/03/2012 15:00:02] *** Error : Service SQLAgent$MSDPM2010 is not installed. The SQL Server 2008 installation is not valid.Uninstall SQL Server 2008 and then run DPM Setup again.
[27/03/2012 15:00:02] Information : SQL Server Agent service configuration is not correct.
[27/03/2012 15:00:02] Information : Check SQL Server service configuration.
[27/03/2012 15:00:02] Data : SQL Server instance name = MSDPM2010
[27/03/2012 15:00:02] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
[27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='MSSQL$MSDPM2010').
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: MSSQL$MSDPM2010 : Service not found
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectConfigs.CheckSqlServerServiceConfig(InspectContext context)
[27/03/2012 15:00:02] *** Error : Service MSSQL$MSDPM2010 is not installed. The SQL Server 2008 installation is not valid.Uninstall SQL Server 2008 and then run DPM Setup again.
[27/03/2012 15:00:02] Information : SQL Server service configuration is not correct.
[27/03/2012 15:00:02] Information : Detect if SQL Server is evaluation edition
[27/03/2012 15:00:02] Information : Check for existing database.
[27/03/2012 15:00:02] Information : Starting service
[27/03/2012 15:00:02] Data : Service name = MSSQL$MSDPM2010
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: MSSQL$MSDPM2010 ---> System.InvalidOperationException: Service MSSQL$MSDPM2010 was not found on computer 'VMBACKUP'. ---> System.ComponentModel.Win32Exception: The specified service does not exist as an installed service
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.GenerateNames()
at System.ServiceProcess.ServiceController.get_ServiceName()
at System.ServiceProcess.ServiceController.GenerateStatus()
at System.ServiceProcess.ServiceController.get_Status()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.StartService(String serviceName, String machineName, Boolean restart)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.CheckServiceStartError(String serviceName, InvalidOperationException invalidOperationException)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.StartService(String serviceName, String machineName, Boolean restart)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.StartSqlService(String instanceName, String sqlServerMachineName)
[27/03/2012 15:00:02] Information : Dpmdb does not exist on this system.
[27/03/2012 15:00:02] Information : Check if SQL Server 2008 Reporting Services is installed.
[27/03/2012 15:00:02] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services. (Namespace : \\VMBACKUP\root\Microsoft\SqlServer\ReportServer\RS_MSDPM2010\v10\admin).
[27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSDPM2010').
[27/03/2012 15:00:02] * Exception : => System.Management.ManagementException: Invalid namespace
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetRosettaConfigFilePath(String sqlServerMachineName, String sqlInstanceName, ConnectionOptions connectionOptions)
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportServerNotInstalledException: Report server is not installed ---> System.Management.ManagementException: Invalid namespace
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetRosettaConfigFilePath(String sqlServerMachineName, String sqlInstanceName, ConnectionOptions connectionOptions)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetRosettaConfigFilePath(String sqlServerMachineName, String sqlInstanceName, ConnectionOptions connectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectReportingPrerequisites.CheckSqlServerReportingServices(InspectContext context)
[27/03/2012 15:00:02] Information : SQL Server 2008 Reporting Services MSDPM2010 instance is not installed.
[27/03/2012 15:00:02] *** Error : Setup has detected that the installation of Reporting Services is not correctly configured or no instance of Reporting Services is linked to MSDPM2010 of SQL Server.1)To use the local dedicated MSDPM2010 instance with DPM, uninstall SQL Server and run setup again.
2)To use the option of installing DPM with an existing instance of SQL Server, make sure that the Reporting Services instance is also installed and linked correctly. For details, refer to DPM Setup Help.
[27/03/2012 15:00:02] Information : Check SQL Server 2008 Reporting Services report server service configuration.
[27/03/2012 15:00:02] Information : Query WMI provider for Service Details. (Namespace : \\VMBACKUP\root\cimv2).
[27/03/2012 15:00:02] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='ReportServer$MSDPM2010').
[27/03/2012 15:00:02] * Exception : Expecting the following exception. Ignoring intentionally. => Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ServiceNotFoundException: ReportServer$MSDPM2010 : Service not found
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetServiceConfig(String serviceName, String machineName, ConnectionOptions wmiConnectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectReportingPrerequisites.CheckRosettaServicesConfig(InspectContext context)
[27/03/2012 15:00:02] *** Error : Service ReportServer$MSDPM2010 is not installed. The SQL Server 2008 Reporting Services installation is not valid.Uninstall SQL Server 2008 Reporting Services and then run DPM Setup again.
[27/03/2012 15:00:02] Information : Report Server service configuration is not correct.
[27/03/2012 15:00:02] Information : End Inspect.
[27/03/2012 15:00:02] Information : **************************************************************************************
[27/03/2012 15:00:02] Information : Instantiating inspect component.
[27/03/2012 15:00:02] Data : Path of output xml = \PostInstallInspect.xml
[27/03/2012 15:00:03] Information : <<< Dialog >>> Inspect Page : Leaving
[27/03/2012 15:00:03] Information : <<< Dialog >>> User Information Page : Entering
[27/03/2012 15:00:03] Data : Purchased Client Agent Licenses = 0
[27/03/2012 15:00:03] Data : Purchased Standard Agent Licenses = 0
[27/03/2012 15:00:03] Data : Purchased Enterprise Agent Licenses = 0
[27/03/2012 15:00:09] Information : <<< Dialog >>> User Information Page : Leaving
[27/03/2012 15:00:09] Data : Purchased Client Agent Licenses = 0
[27/03/2012 15:00:09] Data : Purchased Standard Agent Licenses = 0
[27/03/2012 15:00:09] Data : Purchased Enterprise Agent Licenses = 0
[27/03/2012 15:00:09] Information : <<< Dialog >>> Install location Page : Entered
[27/03/2012 15:00:09] Information : Check if the media is removable
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:09] Data : Drive Name = C:\
[27/03/2012 15:00:09] Data : Drive Type = 3
[27/03/2012 15:00:09] Information : Check attributes of the directory
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:09] * Exception : Ignoring the following exception intentionally => System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Microsoft DPM'.
File name: 'C:\Program Files\Microsoft DPM'
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[27/03/2012 15:00:09] Information : Query free disk space
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:09] Data : Free Space = 2373
[27/03/2012 15:00:09] Information : Query free disk space
[27/03/2012 15:00:09] Data : Folder Path = C:\Windows\system32
[27/03/2012 15:00:09] Data : Free Space = 2373
[27/03/2012 15:00:09] Information : Check if the media is removable
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:09] Data : Drive Name = C:\
[27/03/2012 15:00:09] Data : Drive Type = 3
[27/03/2012 15:00:09] Information : Check attributes of the directory
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:09] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft DPM\DPM\DPMDB'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[27/03/2012 15:00:09] Information : Query free disk space
[27/03/2012 15:00:09] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:09] Data : Free Space = 2373
[27/03/2012 15:00:11] Information : Check if the media is removable
[27/03/2012 15:00:11] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:11] Data : Drive Name = C:\
[27/03/2012 15:00:11] Data : Drive Type = 3
[27/03/2012 15:00:11] Information : Check attributes of the directory
[27/03/2012 15:00:11] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:11] * Exception : Ignoring the following exception intentionally => System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Microsoft DPM'.
File name: 'C:\Program Files\Microsoft DPM'
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[27/03/2012 15:00:11] Information : Query free disk space
[27/03/2012 15:00:11] Data : Folder Path = C:\Program Files\Microsoft DPM
[27/03/2012 15:00:11] Data : Free Space = 2373
[27/03/2012 15:00:11] Information : Query free disk space
[27/03/2012 15:00:11] Data : Folder Path = C:\Windows\system32
[27/03/2012 15:00:11] Data : Free Space = 2373
[27/03/2012 15:00:17] Information : Check if the media is removable
[27/03/2012 15:00:17] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:17] Data : Drive Name = D:\
[27/03/2012 15:00:17] Data : Drive Type = 3
[27/03/2012 15:00:17] Information : Check attributes of the directory
[27/03/2012 15:00:17] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:17] Data : File Attributes = Directory
[27/03/2012 15:00:17] Information : Query free disk space
[27/03/2012 15:00:17] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:17] Data : Free Space = 786513
[27/03/2012 15:00:17] Information : Query free disk space
[27/03/2012 15:00:17] Data : Folder Path = C:\Windows\system32
[27/03/2012 15:00:17] Data : Free Space = 2373
[27/03/2012 15:00:18] Information : Check if the media is removable
[27/03/2012 15:00:18] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Data : Drive Name = D:\
[27/03/2012 15:00:18] Data : Drive Type = 3
[27/03/2012 15:00:18] Information : Check attributes of the directory
[27/03/2012 15:00:18] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Data : File Attributes = Directory
[27/03/2012 15:00:18] Information : Check if the media is removable
[27/03/2012 15:00:18] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:18] Data : Drive Name = C:\
[27/03/2012 15:00:18] Data : Drive Type = 3
[27/03/2012 15:00:18] Information : Check attributes of the directory
[27/03/2012 15:00:18] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:18] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft DPM\DPM\DPMDB'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[27/03/2012 15:00:18] Information : Check the filesystem on which DPM and prerequisites are installed
[27/03/2012 15:00:18] Information : D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Information : C:\Windows\system32
[27/03/2012 15:00:18] Information : Query free disk space
[27/03/2012 15:00:18] Data : Folder Path = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Data : Free Space = 786513
[27/03/2012 15:00:18] Information : Query free disk space
[27/03/2012 15:00:18] Data : Folder Path = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:18] Data : Free Space = 2373
[27/03/2012 15:00:18] Information : Query free disk space
[27/03/2012 15:00:18] Data : Folder Path = C:\Windows\system32
[27/03/2012 15:00:18] Data : Free Space = 2373
[27/03/2012 15:00:18] Data : Location of program files = D:\Program Files\Microsoft DPM
[27/03/2012 15:00:18] Data : Location of database files = C:\Program Files\Microsoft DPM\DPM\DPMDB
[27/03/2012 15:00:18] Information : <<< Dialog >>> Install location Page : Leaving
[27/03/2012 15:00:27] Data : Path of inspection output xml = C:\\DPMLogs\RemoteDbInspectReport.xml
[27/03/2012 15:00:27] Information : Instantiating inspect component.
[27/03/2012 15:00:27] Data : Path of output xml = C:\\DPMLogs\RemoteDbInspectReport.xml
[27/03/2012 15:00:27] Information : **************************************************************************************
[27/03/2012 15:00:27] Information : Start Inspect.
[27/03/2012 15:00:27] Information : Check if SQL Server 2008 is installed.
[27/03/2012 15:00:27] Information : Query WMI provider for SQL Server 2008. (Namespace : \\localhost\root\Microsoft\SqlServer\ComputerManagement10).
[27/03/2012 15:00:27] Information : Query for WMI class. (Query : Select * from SqlServiceAdvancedProperty where ServiceName='{0}' and PropertyName='Version').
[27/03/2012 15:00:28] Information : SQL Server 2008 DPM2010 instance is present on this system.
[27/03/2012 15:00:28] Information : Check if SQL Server 2008 SP1 is applied.
[27/03/2012 15:00:28] Information : Query WMI provider for SQL Server 2008 SP1. (Namespace : \\localhost\root\Microsoft\SqlServer\ComputerManagement10).
[27/03/2012 15:00:28] Information : Query for WMI class. (Query : Select * From SqlServiceAdvancedProperty Where ServiceName='MSSQL$DPM2010' AND PropertyName = 'SPLEVEL').
[27/03/2012 15:00:28] Information : Sql Server 2008 Service Pack Level is 3
[27/03/2012 15:00:28] Information : SQL Server 2008 SP1 is present on DPM2010 instance of this system.
[27/03/2012 15:00:28] Information : Check SQL Server Agent service configuration.
[27/03/2012 15:00:28] Data : SQL Server instance name = DPM2010
[27/03/2012 15:00:28] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:28] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='SQLAgent$DPM2010').
[27/03/2012 15:00:29] Data : Credentials of the service = MANAGEMENT\DPMSQLSvcsAcct
[27/03/2012 15:00:29] Information : SQL Server Agent service configuration is correct.
[27/03/2012 15:00:29] Information : Check SQL Server service configuration.
[27/03/2012 15:00:29] Data : SQL Server instance name = DPM2010
[27/03/2012 15:00:29] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='MSSQL$DPM2010').
[27/03/2012 15:00:29] Data : Credentials of the service = MANAGEMENT\DPMSQLSvcsAcct
[27/03/2012 15:00:29] Information : SQL Server service configuration is correct.
[27/03/2012 15:00:29] Information : Detect if SQL Server is evaluation edition
[27/03/2012 15:00:29] Information : Check the disk space for remote database.
[27/03/2012 15:00:29] Information : Remote Db disk space required : 900 MB disk space available = 786513 MB
[27/03/2012 15:00:29] Information : Check the Named Pipes protocol for remote database.
[27/03/2012 15:00:29] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='MSSQL$DPM2010').
[27/03/2012 15:00:29] Information : Check for existing database.
[27/03/2012 15:00:29] Information : Starting service
[27/03/2012 15:00:29] Data : Service name = MSSQL$DPM2010
[27/03/2012 15:00:29] Data : Current status of service = Running
[27/03/2012 15:00:29] Information : Service is already running
[27/03/2012 15:00:29] Data : Database connection string = Pooling = false;Integrated Security=SSPI;database=master;server=np:localhost\DPM2010
[27/03/2012 15:00:29] Information : Dpmdb does not exist on this system.
[27/03/2012 15:00:29] Information : DPM database DPMDB is missing or corrupt.If you are performing a clean installation of DPM, you must delete the DPM database before you run Setup. If you are upgrading or repairing an existing installation of DPM, you must restore a valid DPM database, and then proceed with Setup.
[27/03/2012 15:00:29] Information : Check whether the remote db msi has been installed.
[27/03/2012 15:00:29] Information : Check DPM Database Version.
[27/03/2012 15:00:29] Data : Database connection string = Pooling = false;Integrated Security=SSPI;database=DPMDB;server=localhost\DPM2010
[27/03/2012 15:00:29] * Exception : Expecting the following exception. Ignoring intentionally. => System.Data.SqlClient.SqlException: Cannot open database "DPMDB" requested by the login. The login failed.
Login failed for user 'MANAGEMENT\DPMSQLSvcsAcct'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlContext.Open()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectDls.CheckDBVersion(InspectContext context)
[27/03/2012 15:00:29] Information : detectResult = DPMDBAbsent
[27/03/2012 15:00:29] *** Error : DPM Setup has detected that the DPM database files are missing from the selected instance of SQL Server 2008.Make sure that the correct database files are attached to the selected instance of SQL Server and then install DPM 2010 again.
[27/03/2012 15:00:29] Information : Checking if DPM db backup is needed.
[27/03/2012 15:00:29] Information : This is not upgrade path, so no DB Backup needed
[27/03/2012 15:00:29] Information : DPM DB Backup is not needed.
[27/03/2012 15:00:29] Information : Check if SQL Server 2008 Reporting Services is installed.
[27/03/2012 15:00:29] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services. (Namespace : \\localhost\root\Microsoft\SqlServer\ReportServer\RS_DPM2010\v10\admin).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM2010').
[27/03/2012 15:00:29] Data : Path of configuration file for SQL Server 2008 Reporting Services = D:\Program Files\Microsoft SQL Server\MSRS10.MSRS10\Reporting Services\ReportServer\RSReportServer.config
[27/03/2012 15:00:29] Information : Query WMI provider for instance linked to SQL Server 2008 Reporting Services. (Namespace : \\localhost\root\Microsoft\SqlServer\ReportServer\RS_DPM2010\v10\admin).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM2010').
[27/03/2012 15:00:29] Data : Database server for SQL Server 2008 Reporting Services = VMBACKUP\DPM2010
[27/03/2012 15:00:29] Information : SQL Server 2008 Reporting Services DPM2010 instance is installed and linked to SQL Server VMBACKUP\DPM2010.
[27/03/2012 15:00:29] *** Error : Setup has detected that the installation of Reporting Services is not correctly configured or no instance of Reporting Services is linked to DPM2010 of SQL Server.1)To use the local dedicated DPM2010 instance with DPM, uninstall SQL Server and run setup again.
2)To use the option of installing DPM with an existing instance of SQL Server, make sure that the Reporting Services instance is also installed and linked correctly. For details, refer to DPM Setup Help.
[27/03/2012 15:00:29] Information : Check SQL Server 2008 Reporting Services report server service configuration.
[27/03/2012 15:00:29] Information : Query WMI provider for Service Details. (Namespace : \\localhost\root\cimv2).
[27/03/2012 15:00:29] Information : Query for WMI class. (Query : SELECT * FROM Win32_Service WHERE Name='ReportServer$DPM2010').
[27/03/2012 15:00:29] Data : Credentials of the service = MANAGEMENT\DPMSQLSvcsAcct
[27/03/2012 15:00:29] Information : Report Server service configuration is correct.
[27/03/2012 15:00:29] Information : Check Reporting SecureConnectionLevel.
[27/03/2012 15:00:29] Information : Getting the reporting secure connection level for localhost/DPM2010
[27/03/2012 15:00:29] Information : Setup detected that the Reporting SecureConnectionLevel is 0.
[27/03/2012 15:00:29] Information : End Inspect.
[27/03/2012 15:00:29] Information : ************************************************************************************** -
Connecting to Amazon Redshift from SQL Server Reporting Services
Hey all,
Just a general question for now as the company I work for is looking to migrate our current data warehouse from SQL Server 2008R2 to Amazon Redshift. Currently all of our reports on our intranet are SQL Server Reporting Services reports and
I have been tasked with finding out whether or not we can connect SSRS to Amazon Redshift. I see that Amazon Redshift is a SQL data warehouse and uses industry standard ODBC and JDBC connections and PostgreSQL drivers so many popular software vendors
are certifying Amazon Redshift with their offerings to enable tools to still access RedShift.
If SSRS can connect to Amazon Redshift, can you also advise me on how this can be done so I can begin playing around with it.
CheersHi there,
You might want to try the Windows AMIs.
http://aws.amazon.com/windows/amis/
For local access, you'll probably need to install 32-bit & 64 bit Postgres drivers on the server & developer machines.
http://stackoverflow.com/questions/17323590/redshift-with-ssis-ssdt
http://michaeljswart.com/2013/03/checking-out-amazon-redshift/
Then you'll need to configure connection strings in your data source and test.
http://docs.aws.amazon.com/redshift/latest/mgmt/configuring-connections.html
cheers,
Andrew
Andrew Sears, T4G Limited http://www.performancepointing.com -
TF255186: The following SQL Server Reporting Services Instance could not be found
Hi,
I'm trying to install TFS 2013 on a remote SQL RS instance.
Using the TFS 2103 U4 installation
SQL 2012 RS, name instance, Server: SQLProdA, Instance Name COMRS
When I enabled tracing using debugView I see the following output:
[4160] [Error @11:07:10.978] Exception Message: TF255186: The following SQL Server Reporting Services Instance could not be found: COMRS. The server name is: SQLProdA. (type TfsAdminException)
Any ideas what the issue is?
Thanks,
reuvyHi Charles,
Thanks for the help. I already saw those links, and am already trying with the format. As I wrote above:
Server: SQLProdA, Instance Name COMRS
So I wrote in the box "SQLProdA\COMRS" (without quotes of course) and I still keep getting that error.
I don't know if it matters, but although this is indeed a named instance, nonetheless, the path to the report server uses the default url (ie.
http://servername/reports) as opposed to the name instance version (ie.
http://servername_instance/reports) as mentioned by your link and this post:
https://msdn.microsoft.com/en-us/library/bb552341.aspx
But, I checked with Fiddler on the server and didn't see it trying to even access the link so I don't think it is related. I saw with Process Monitor that it is indeed trying to access via the network resources on SQLProdA, so I know it's trying.
I have noticed something in the past, and wondered if this could be the issue, that for example if I have Management Studio 2014 installed, I cannot connect to a Reporting Services instance which is 2012. Only when Management Studio 2012 is installed
and being used can I connect. I wondered if this possibly could be related, that maybe the API or something else which the installer is using is missing some component to connect to the RS instance.
Just in case, I already installed both the SQL 2012 and 2014 Client Tools Connectivity (although I first installed 2014, and then 2012).
Do you think this could be the issue? If not, do you possibly have any other leads?
Thanks,
Reuvy
Maybe you are looking for
-
Free goods failed for reason 3
Hello Gurus, I have create inclusive free good condition record with following data, material : t-atc01 customer: t-s62a01 sales area: 1000/10/00 all free good determination data has been defined so
-
Accounting document missing for MIGO
A migo document doesnu2019t have corresponding FI document. While selecting FI document option it says No subsequent document found in Accounting Message no. RW011 Diagnosis All documents generated in Financial Accounting for object type 'MKPF', Refe
-
Need Advice: How to do clustering with PointBase DBMS
Hi, I am doing an application that requires me to update several pointbase databases with same schema(running on separate machines) and perform transactions using them. I would be greatly appreciated if someone can tell me what are the available code
-
HT1222 I don't have wifi connection how should i update
I want to update to ios7 As i m not home I don't have wifi connection I am ready to use cellular data How can i do so
-
My camera app wont open, My camera app wont open
My camera app will not open i tap on the application then it freezes on the camera lens anamation where it is suppost to open along with photo booth and facetime i have already tryed to turn of the ipad and then turn back on also i tryed to reset by