Verify that you have installed compressor?
I've been using compress for 3 years now, and today a box popped up after i selected the video, and selected the output. it said please restart your system or verify that you have installed compressor correctly.***. i have to export this video today. any help would be very helpful.
Hi:
You can try this:
COMPRESSOR TROUBLESHOOTING
http://docs.info.apple.com/article.html?artnum=302845
Hope that helps !
Alberto
Similar Messages
-
Not sure what to do. I've tried a system restore on my computer after the update in hopes of undoing the problem, that didn't work. I've tried to install, the new version of itunes for over two days now and I get to the point where it says "starting services" and it almost get's done and then it gives me that message " Service apple mobile device (apple mobile device) failed to start. Verify that you have sufficient privledges to start system services." Then it gives me three options to click on "abort", "retry" or "ignore". I've tried to retry over and over and it does no good, I just get the same message. I've tried ignore and the one time it did finish installing itunes, it didn't work, I got error messages telling me that it failed to download properly and I needed to delete the program and download it again. I thought maybe it had something to do with my ipod not being pluged into the computer so I pluged that it and it's still giving me the same message. I just don't know what to do. I'm very frustrated and I would really appreciate it if someone could help me. I'm completely out of ideas.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Unable to install iTunes 11.1.4.62 on windows 8. I get
Service "Apple mobile Device) failed to start.
Verify that you have sufficient privileges to start system services.
I am trying to install it on my desktop. I am also in Administrator mode. My iTunes stopped working when I was notified that there was a new version of iTunes and would I like to download it. I said yes as always and it was unable to finish the update because of a
runtime Error!
Program: C:\program Files (x86)\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contace the application's suport team for more information.
My iTunes stopped working at this time. I thought I could delete iTunes and start over. This tactic did not work.
Can anyone make sense of what I am saying and help me to get my iTunes back again?Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
not able to install itunes in windows 7. Whwn I am installng setup the error displayed as "Service 'Apple Mobile Device' failed to start Verify that you have sufficient privileges to start system services" and when i ignore this message and continue with installation of itunes and open the installed itunes in laptop it gaian shows the error "iTunes was not installed correctly. Please reinstall iTunes Error7(Windows Error 14001)". Please provide me some solution.
Please give me some solution on above issue.....
-
I'm trying to re-install itunes on my laptop & I am getting a message that has stopped the re-install & it says: "Service 'Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." The diaglogue box gives me the options to abort, retry, or ignore; when I tried retry and ignore the re-install process stays stalled & the dialogue box comes back & I don't want to abort & start this all over to probably end up with the same issue; what does this mean & what do I do?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Initially iTunes would not run although it had been running quite well up until now. Suddenly received this error on PC start-up "The program can't start because MSVC80.dll is missing from your computer. Try reinstalling the program to fix this problem." Research on Net pointed me to iTunes as the issue. Tried to start iTunes and received that message again. Tried installing latest version of 64-bit iTunes and received the subject message part way through the install: Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
iTunes has been running great on this PC for years. What's up?
RonSee Troubleshooting issues with iTunes for Windows updates.
tt2 -
When I was trying to install the update to itunes I would get the following message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services. I could "Abort" "Retry" or "Ignore" I tried all of them starting with retry first. Nothing worked. I then uninstalled Itunes and tried to reinstall and received the same message. Not sure how to take care of it so that I can use Itunes again.
Try Troubleshooting issues with iTunes for Windows updates.
tt2 -
Hi!
So i think i closed the wrong service at some point a few weeks back (apple mobile device) but iTunes remained working after that for another week. I then updated iTunes and i get the same "Service ‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." every time. If i click ignore, just so i can access iTunes with out syncing my iPod (touch 2nd gen) i then get 'iTunes was not installed correctly. Please re-install iTunes. Error 7 (Windows error 193)" when it has all installed. I don't understand what the problem is anymore as I have looked at other questions on the apple website, carried out the advice and it hasn't work. Any of them.
Tings I have done:
- Wiped all iTunes and Apple data from my computer (if you search for 'iTunes' or 'Apple' nothing comes up apart from applets from system code.
- Attached iPod before iTunes install and updated drivers.
- Installed iTunes as 'Run as administrator'
- Uninstalled and re-installed the software nearly 20 times now and rebooted the computer in between everytime.
Please someone help because i really need to get music on my ipod and i enjoy the ease of use of iTunes compared to spotify or Windows Media Player.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
tt2 -
I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message “Service ’Apple Mobile Device’ failed to start, verify that you have sufficient Privileges to start system Services”
On pressing retry I got the same message.
On pressing Ignore, I got the message “ITunes was not installed correctly, please reinstall ITunes – Error 7 – (windows error 126)
I reinstalled with the same error messages and the same results.
I uninstalled existing and reinstalled from scratch and the same error messages again.
I try to repair and at the end it said it had installed correctly – but when it tried to start I got the message “This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem” I now get the same message when I first start the computer but when I press ok I receive ““ITunes was not installed correctly; please reinstall ITunes – Error 7 – (windows error 126)” again.
It appears the update has not only corrupted the operating system (Xp Pro SP3) of my computer but I have no backups to my IPhone, my wife’s IPhone or the three others phones that use my computer.
I hope you can advise me how to recover my backupsHi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
While installing the latest iTunes version I get the following msg:"Service Apple Mobile Device failed to start.Verify that you have sufficient privileges to start system services. I already tried it from the installer Running it as Administrator and still get the same message. I click "ignore" and finish the installation but when I try to open it I get this "Runtime Error! R6034 An application has made an attempt to load the C runtime library incorrectly." I already uninstalled iTunes and all other applications involved and re-installed itunes from the itunes site and the problem persists. Please help!
Solving MSVCR80 issue and Windows iTunes install issues.
-
I am trying to re-install itunes.
I removed all Apples software, and restarted.
still get error message: "Verify that you have access to that directory"
(as administrator)
now what?Thanks so much. This definitely worked. I'm sorry I did not think of using IE. I use Foxfire exclusively so seldom even think of IE as an alternative.
-
The latest version of iTunes did not install properly on my Windows 7-64bit PC. I am getting the following error message: "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services."
I have tried the following troubleshooting steps without success:
Restart PC
Uninstall iTunes and attempt to reinstall
Verify that I am signed in as an administrator
Download and save iTunes64Setup file, right-click, and run as Administrator
Disable Norton antivirus software
Any suggestions would be greatly appreciated!Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
Hi, I'm trying to re-install the latest iTunes on my Gateway w/ Windows XP. I had to update it a while back to put songs on my brother's iPod, but my computer froze halfway through and nothing has worked right since.
I keep getting the message "Service 'Bonjour Service' (Bonjour Service) failed to start. Verify that you have sufficient privileges to start system services."
I looked through older discussions that told me to go to right click My Computer - Manage - Services and Applications - Services - Find Bonjour and restart it.
Well, the only option that I can click on is Start. When I do, it says "Windows could not restart the Bonjour Service service on Local Computer. Error 2: The system cannot find the file specified."
Where do I go from here? Help would be greatly appreciated, I've been trying to fix this for over a year now with no dice. Also, I cannot do a factory reset (last effort) because it says the administor's account is disabled and I do not have the disc.Sorry if double posting is a no-no here, but I forgot to add that I've already tried disabling Spyware Doctor.
-
I tried to install Itunes ver 11.1.4 on my Windows7 64 bit system and got this message: “Service ‘Apple Mobile Device’(Apple Mobile Device) failed to start. Verify that you have sufficient privilliages to start system services.”
I have administrator privillages so I dont understand what the problem is. I have loaded previous versions of Itunes before. Has anyone else had this problem?See Troubleshooting issues with iTunes for Windows updates.
tt2 -
I recieve the following error message when trying to install Quicktime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory." I just trying to get the latest version of iTunes. Thanks
"Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?
Maybe you are looking for
-
27" apple cinema display switch between mac and pc
I have a 27" ACD with a standard mini display port and USB connector for my macbook pro. I'm going to bulid a PC (for gaming) and I'd like to connect the mintower PC to the 27" ACD. Is there a product that will allow me to switch between the MBP an
-
Export with all objects and only some table data
Hi, can we use exclude and include both at a time.Because I want export full schema but data required only some 5 table, Is it possible. please share expdp and impdp query. Regs, Brijesh
-
LabVIEW created .DAT file with saving only new data on existing files
I can successfully create and save a .DAT file using LabView and Diadem. The save command I am using (in Labview) only overwrites existing files, I would like it to save only the new data from the last save. Overall I would like to save the data e
-
Replacement for FM 'CUD0_GET_CONFIGURATION'
Hi all, I am upgrading SAP from 3.1I to ECC 5.0. I am getting upgrade error that 'CALL FUNCTION NO LONGER AVAILABLE IN TARGET SYSTEM' for FM 'CUD0_GET_CONFIGURATION'. Can anyone suggest the equivalent FM in ECC 5.0 version. thanks Rakesh
-
Mail forgets the password quite a lot and usally the same people.
Does any else get this and know the answer? On occasions a user sometimes gets the message: The IMAP server "address of server.co.uk" rejected the password for user (name of user). However once I re-apply the password in workgroup manager using the s