Verify this account - problems getting started in iCloud

I have a valid Apple ID -- my primary email address. This is what I use for all my iTunes purchases.
I also have a 'nickname' Apple ID that I use here in these discussion forums. That nickname is affiliated with my primary email address.
Awhile ago, I did set up a MobileMe account for myself, but I no longer use it.
When I started to go through the motions of setting up iClound, it defaults to my @me.com address. I changed it to my valid Apple ID, my primary email address. But iCloud isn't validating. It keeps telling me to 'check my email for the next instructions.' I get the same error when I try to setup Find My Friends. Even clicking on the 'resend email' button doesn't do anything. I've confirmed that no email went to my spam folder.
What gives?

Update:
I go to appleid.apple.com, and I can log on with my nickname I use for my Apple ID. It lists my primarly email address correctly, and has a green 'verified' checkmark next to it.
Below it is a box stating "Make your Apple ID and primary email address one and the same" with a bit yellow triangle icon with an exclamation point inside. It lists my primary email address, and I click on 'submit' and .... nothing happens.
I've set up my gmail address as an alternative address, and that was verified.
Why is Apple making this so hard?

Similar Messages

I just upgraded to iOS 8. In iCloud I'm being prompted to check my email to verify this account. The email address they have at the top of my phone is wrong. I have it typed correctly everywhere else. Now what do I do?

I just upgraded to iOS 8. In iCloud I'm being prompted to check my email to verify this account. The email address they have at the top of my phone is wrong. I have it typed correctly everywhere else. Now what do I do?

See if you can manage your Apple ID and change the primary email account to the correct address, as explained here: Change your Apple ID. Then verify the address.

HT1688 new to icloud....how do I "verify my account" when I cannot receive Icloud messages until the account is verified?

I am new to icloud....Most everything I attempt to set up tells me that I need to verify my account and sends an email to my new icloud email account that I cant get into until I verify it and i cant figure out how to verify....any suggestions??

Hello shellyddddd,
The following information should be helpful for getting your account verified.
I cannot sign in to the iCloud Preferences pane on my Mac due to an alert stating that my email address has not been verified.
If you cannot sign in due to an alert stating "Account not verified - Check your email for instructions for verifying your account":
Close and reopen the iCloud Preferences pane before logging in again.
If that does not resolve the issue, check your email folder and Junk folder for a verification email sent from Apple.
If there is no verification email in your email folder or Junk folder, click the Resend Verification Email button on the iCloud Preferences pane.
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
Cheers,
Allen

I am in subscription center because my billing information expired. I updated my billing information but how do I get my account to get started again?

I am in subscription center because my billing information expired. I updated my billing information but how do I get my account to get started again?

Hi Eric ,
You can log in to Adobe.com with your credentials ,i.e Adobe id and password .
By clicking on the manage account tab you can easily update the information and get started .The manage account tab will prompt you for the password ,that password is same as your Adobe password.
You may want to refer to the following link for the same.
https://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting -creative-cloud.html
Regards
Sukrit Dhingra

I am unable to verify my account (via email) to use iCloud storage, can't get Apple to send the email

Why won't Apple send me an email so I can verify my account to use iCloud storage?

I am sorry to hear that you are unable to verify your Firefox account. Here are some possible solutions:
*AOL has been known to block a lot of emails and items in them. Try verifying your account with another email provider.
*Try copying the link to verify your account and pasting it into another tab.
*See if it works in a different browser. It may be a bug in the email.
*If these do not work, could you send us a screenshot of what is happening? See the link below.
How to take a screenshot:
[[How do I create a screenshot of my problem?]]

Problems getting started with LabVIEW FPGA

Two (probably) related questions:
1. I am trying to get started with LabVIEW FPGA, and I am having trouble using a host VI to test my FPGA VI. I started with a basic QAM modulator VI, to be run on the FPGA, and I have reached the point where I need to verify the logic and timing with this VI running on the development computer with simulated IO. I have tried various combinations of putting the code inside single-cycle timed loops vs not; putting the modulator block directly into the host VI, and using the "FPGA reference" block. When neither the host VI nor the modulator VI use a single-cycle timed loop, I see correct behavior. In every other case, the output of the VI is either absent or incorrect. I need to use a single-cycle timed loop in the FPGA VI to properly verify timing behavior (as far as I know), so the one functioning case is not enough for me.
I'm sure there is a key step I'm missing or misunderstanding, but I have not been able to figure it out myself yet. I've attached my modulator diagram as well as two different attempts at host VIs. I can share other information, but I'm not sure what is most relevant.
2. I am also trying to test a simple wrapper VI for the Xilinx FFT block, and I am having trouble accessing FIFOs inside the host VI. I thought this would be relatively straightforward, but when I tried to change the "method" on an "invoke method" block, there were no options for accessing FIFOs, as I understood there should be. This is a total roadblock for me. These two diagrams are also attached, the test diagram shows the options available to me for the "invoke method" block.
Labview 2013, PXIe-7965R, PXIe-8133 controller.
I had to combine the diagram images; in case they are hard to follow this way, see the individual images here: http://imgur.com/a/oB6OD .
Thanks in advance for any suggestions.
Attachments:
mod_all.png ‏68 KB
fft_all.png ‏52 KB

Hello Monguin61
If you are having problems reading from DMA FIFO's you should test them using a very simple code to understand their behavior. First, you could start taking a look to the linked documents:
Reading DMA FIFOs from Host VIs (FPGA Interface)
Using DMA FIFO to Develop High-Speed Data Acquisition Applications for Reconfigurable I/O Devices
FIFO.Read (Invoke Method)
Then you could test and analyze a simple example to understand how it works, for example this one: Simple DMA FIFO Example for FPGA.
Check the references when you are using DMA FIFO's, I noticed you did not connect them in the second picture attached.
Regards
Frank R.

Problems getting started with templates

I am just getting started with the dreamweaver 30 day trial.
I am trying to create my first file. When I try to open a new
template file I get the message below-
"Dreamweaver stores templates in the root folder of a site,
but there are no sites defined. Please add a site"
What does this mean? How do I find the templates? I am a
total dreamweaver newbie trying to learn the program.
Thanks

ntmunger wrote:
> I am just getting started with the dreamweaver 30 day
trial. I am
> trying to create my first file. When I try to open a new
template
> file I get the message below-
>
> "Dreamweaver stores templates in the root folder of a
site, but there
> are no sites defined. Please add a site"
>
> What does this mean? How do I find the templates? I am a
total
> dreamweaver newbie trying to learn the program.
>
> Thanks
It's not a problem with templates.
You have to create a site for your website - F1 will show you
how to do
that. Once you have a site created, you will be able to
create new template
files, and they can write themselves to the correct part of
the site.
HTH,
Pete.
Peter Connolly
http://www.acutecomputing.co.uk
Derby
UK
Skype ID: acutecomputing

Can anyone verify this color problem

Importing a photoshop solid color green,(72, 182, 70), file (tif adobe98) into Aperture 3.2.3 on a lion machine. When this file gets imported to aperture the color changes dramatically. When I convert that same file to sRGB in photoshop and then import it into aperture it looks as if most or all of the color was NOT lost or hosed as the Adobe98 file was. Can anyone explain what is going on? Thanks Ireally want color management to work. david

Thank you for your help. I am glad that I am not alone with this problem. I feel it is a really huge error, but most people don't care, because they don't own a wide gamut display. If you don't see the problem you don't miss a solution.... For sure the Apple Aperture folks use Apple Displays, they can't see the problem too, if it exists outside my own Aperture installation. To verify this I did the following:
1) Fresh installation of Aperture: Trashed Aperture.app, trashed Aperture Application settings, reinstalled Aperture 3 from DVD and did the 3.3.1 update. Made a new library. It did not help!!!
2) Used my Macbook Pro to verify. The same problem!!!
How can I verify this on a Laptop display with really small gamut? This is a way to test it for you without owning a WideGamut Monitor:
Download the already known display gamut test image:
http://www.colormanagement.org/de/monitortest.html
Import it in Aperture
Open it in Photoshop independent from Aperture
Be sure that View > Onscreen Proofing in Aperture and the similar in Photoshop is OFF
Place the both application windows beside each other, as you can see the both images at once. I estimate at this time you can't see the stripes not in Aperture and not in Photoshop.
Now change the system wide display profile to "Wide Gamut RGB". If the problem resists in your system too, you will see the background stripes in Photoshop but not in Aperture.
It looks like in my screenshot here:
Left Aperture: No stripes, right Photoshop: Stripes in the second and third image.
To switch to WideGamutRGB is nearly the same as using to the CG301 Eizo profile, the difference in seen colors is not huge at my MacPro. On my MacBook Pro it is a way off, but it simulates that the Laptop display has WideGamut. The display gets the 0-255 steps in colors from the graphics card but these steps are in a much wider color space. So the LCD of the laptop gets compressed colors with the steps in the background compressed to the 0-255. The result are terrible colors but you can see the driffernece of the steps too.
I hope my explanation was understandable. If your test shows the same as mine I think we proofed a really big bug in Aperture. For me it is catastrophic, because I am a big fan of Aperture. Its workflow, its smoothness, the look and feel, the print module etc. etc. everything is nearly perfect. But not with this severe colour mangagement problem that forces some kind of sRGB for all image editing.
A note: This testimage is specially made to value the quality of monitors regarding color gamut. If you see the stripes in image 2 it is okay for AdobeRGB, if see them only in image 3 it is good for sRGB, if you see them not at all the gamut of the display is less than sRGB for the color red. Thiss tells the legend on the right side in German. To see the stripes with all displays you can switch of the blue and green channels in Photoshop.....

Verify Your Account - not getting email

Trying to purchase something from bestbuy.com, I try to login to my account and get the following message:
Verify Your Account
In order to protect your account, we need to verify your identity before you sign in. We have sent a verification code to your e-mail. Please enter the code included in that e-mail to continue.
The verification code e-mail should arrive within a few minutes. If you don't see it, please check your Junk Mail or Spam folder.
I have tried several times today and still get this message. I am not receiving an email, and it is not in my spam or trash either. I talked to 3 different people at 1-888-BESTBUY and no one was able to help. I registered for these forums and received the email from that registration process fine.
Any help with this issue is appreciated, I would like to get this order in.

Hello inittab,
It's never our goal to create a complex experience when you you visit our website to shop. I apologize for your having encountered this apparent roadblock to completing your purchase.
Depending on your e-mail provider, it's possible that these messages may have been filtered as spam and sent to a junk email folder or even the deleted items/trash. If you haven't already done so, I'd encourage you to add the @BestBuy.com domain to your safe senders list and to double-check your filter settings. If you used a web-based mail service, I recommend reviewing your settings via the native interface. You may wish to try using another e-mail address if you continue to experience this issue in the future -- there are numerous reasons why individual messages might not be delivered, many of which lie beyond Best Buy's or your control.
That being said, using the email address you provided when you signed up for Best Buy Unboxed, I was able to locate your account and have initiated a password reset. Please follow the instructions in the email you receive. For best results, I recommend using a new, never used password.
Please let me know how it goes. I'm grateful that you brought your experience to our attention.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message

Is it meant to be this difficult to get started?

I've known about the capabilities of IQ for a long time, but never quite got round to working on it. With the introduction of the Analytics Edition of Crystal Server, it looks like the time is right. My background is 20 years of Crystal, including the Enterprise (SAP BI) products from first release, MS SQL since 6.5, QlikView, SSIS & C#.
However, all that's been on Windows, it seems that IQ is mostly used on Unix. Maybe that explains my problems so far.
The quickstart documentation gets no further than creating a trivial database and loading data from a flat file. Then it leaps into all sorts of stuff I don't need to worry about quite yet.
All I want to do is import data from MS SQL Server 2012, just copying the tables that already exist. My expectation had been some sort of wizard or UI that allowed me to select the tables in the source to have them created in the destination, then have the data import. Something like the wizards in QlikView that generate your initial script. I can't even find out the definition of what should be in the sql.ini file.
Sybooks on line hints at lots of stuff, but never gets around to an explanation.
I've found a variety of long winded Youtube videos that explain very little at the basic level before leaping into optimization.
At the moment, I have a vile UI (written in flash!) and an equally vile query tool to write script. I can't find any step by step documentation beyond 'load the ready rolled demo data'. Most of the docs I have found aren't even for version 16.
Please tell me I've missed a treasure trove of documentation, or a selection of getting started guides.

SAP PowerDesigner can reverse engineer an MS SQL Server database and generate a script to create the IQ schema for you. Use Microsoft DTS to extract the data to a flat file, then have PowerDesigner generate the LOAD TABLE scripts for you. Run the LOAD TABLE scripts as described in the IQ Quick Start Guide. Not a built in wizard, but not too many steps.

Maven 2.0 - problems getting started

Dear friends,
I'm trying to migrate my old fashioned maven projects to the new version of maven 2.0
At first steps I'm just trying to run the console command that appear on the getting Started guide at the maven site, but it is simply not working over here.... the creation command runned well, but I can't compile the generated source code for some reason...
the problem is described as:
The plugin 'org.apache.maven.plugins:maven-resources-plugin' does not exi st or no valid version could be found
any tip?
[INFO] Scanning for projects...
[INFO] -------------------------------------------------------------------------
[INFO] Building Maven Quick Start Archetype
[INFO] task-segment: [compile]
[INFO] -------------------------------------------------------------------------
[INFO] ------------------------------------------------------------------------
[ERROR] BUILD ERROR
[INFO] ------------------------------------------------------------------------
[INFO] The plugin 'org.apache.maven.plugins:maven-resources-plugin' does not exi st or no valid version could be found
[INFO] ------------------------------------------------------------------------
[INFO] For more information, run Maven with the -e switch
[INFO] ------------------------------------------------------------------------
[INFO] Total time: < 1 second
[INFO] Finished at: Sun Jun 11 11:52:35 CEST 2006
[INFO] Final Memory: 1M/2M
[INFO] ------------------------------------------------------------------------

As a first guess, you're unable to connect to a repository to download the plugin (not likely, if you're successfully building with Maven 1), or that repository is temporarily unavailable.
Best bet is to run with -e and see what else it tells you.

Problem getting started with OCCI

Probably a dumb question, but I am having trouble getting the OCCI samples to compile and run with VC6. To try to compile them out of the box, I created a plain Win32 project, added the occi Library and header to my project.
None of the samples would compile, looked at the errors, which suggested I should have defined WIN32COMMON. I did, and everything compiled. Now whenever I get to a point where the code attempts to retrieve something from a ResultSet I get ASSERTIONS in the delete operator (debug mode) or access violations in release mode.
Stumped.
Can anyone give me a clue as to how to get started?
Thanks,
Mark

Mark,
I had the same problem but I figured it out what to do to get it work (took me quite a while...)Ok, here are the things you have to do (in VC 6.0):
* project setting / linker / using following libs only (for Release and Debug!):
oci.lib oraocci9.lib msvcrt.lib msvcprt.lib With these settings I got all OCCI samples to work properly (Release and Debug).
Though developing my own stuff, I still had problems in the debug version sometimes (I'm using Win2K). I found out, when ever the "C:\WINNT\system32\msvcp60d.dll" was loaded at program start (see debug window of your VC) I got some more assertions. So I renamed the "msvcp60d.dll" to "msvcp60d.dll.bak" and copied the "msvcp60.dll" to "msvcp60d.dll". And now everythings works fine.
I guess the reasons for these assertions is the occi libs own memory management, which isn't traced correctly by the debug version of
the "msvcp60.dll"
Cheers,
Johannes

HT4759 When I tap on icloud on my ipad it tells me my account is not verified and to check my email for instructions to verify this account. When I check my email there are no instructions sent. I receive no emails with instructions to verify my account.

I am unable to use icloud on my ipad because a popup tells me my account can not be verified. Whats up?

Put in a request for another verification e-mail to be sent to you.
Start here, change your country if necessary and go to manage your account.
Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether. You may also wish to contact your mail provider to see if their spam filters are removing the email before it gets to you.

We bought 2 iPhone. 4s cant get mail on my husbands phone it says not a MobileMe account this account already been migrated to iCloud we have desk top and can't get mail also we have all the apple products

Can't get the email on my husbands iPhone we bought 2 phones I am able to get mail on my I phone and IPad can't get it on it ouch desk top and husbands iPhone

If you migrated your MobileMe account to iCloud, on your phone you should be able go to Settings>Mail,Contacts,Calendars>Add Account>iCloud and enter the Apple ID associated with your iCloud account. On your desktop computer, you can configure your email client to get your @me.com email by following this guide: http://support.apple.com/kb/HT4864.

Problem getting started weblogic server (for BI Publisher)

Hello,
I am trying to run services BI publisher
But I can't because I have the following error:
SVR_GRP =
JAVA Memory arguments: -Xms256m -Xmx1024m
WLS Start Mode=Production
CLASSPATH=C:\BI11\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\BI11\Oracle_BI1\bifoundation\jdbc\jdk16\bijdbc.jar;;C:\BI11\patch_wls1035\profiles\defaul
t\sys_manifest_classpath\weblogic_patch.jar;C:\BI11\JROCKI~1.2-4\lib\tools.jar;C:\BI11\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\BI11\WLSERV~1.3\server\lib\weblo
gic.jar;C:\BI11\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\BI11\WLSERV~1.3\server\lib\webservices.jar;C:\BI11\modules\ORGAPA~1.1/lib/ant-all.jar;C
:\BI11\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\BI11\wlserver_10.3\server\lib\weblogic.jar;C:\BI11\oracle_common\modules\oracle.dms_11.1.1\dms.jar;C:\BI11\or
acle_common\modules\oracle.jmx_11.1.1\jmxframework.jar;C:\BI11\oracle_common\modules\oracle.jmx_11.1.1\jmxspi.jar;C:\BI11\oracle_common\modules\oracle.odl_11.1.
1\ojdl.jar;C:\BI11\ORACLE~1\soa\modules\commons-cli-1.1.jar;C:\BI11\ORACLE~1\soa\modules\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;C:\BI11\ORACLE~1\modules\orac
le.jrf_11.1.1\jrf.jar;C:\BI11\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\BI11\WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\BI11\patch_wls1035\profiles\default\native;C:\BI11\WLSERV~1.3\server\native\win\32;C:\BI11\WLSERV~1.3\server\bin;C:\BI11\modules\ORGAPA~1.1\bin;C:\BI11\
JROCKI~1.2-4\jre\bin;C:\BI11\JROCKI~1.2-4\bin;C:\oracle11g\dbhome\bin;C:\;C:;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\VAIO;C:\Program Files\Ja
va\jre6\bin;;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\E900\system\bin32;C:\E900\DEMO\bin32;C:\BI11\Oracle_BI1\products\Essbase\EssbaseServer\bin;
C:\BI11\Oracle_BI1\bin;C:\BI11\Oracle_BI1\opmn\bin;C:\BI11\Oracle_BI1\opmn\lib;C:\BI11\Oracle_BI1\perl\bin;C:\BI11\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b07)
Oracle JRockit(R) (build R28.1.3-11-141760-1.6.0_24-20110301-1429-windows-ia32,
compiled mode)
Starting WLS with line:
C:\BI11\JROCKI~1.2-4\bin\java -jrockit -Xms256m -Xmx1024m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\BI11\WLSERV~1.3\server\lib\weblogic.policy -D
weblogic.ProductionModeEnabled=true -Doracle.home=C:\BI11\Oracle_BI1 -da -Dplatform.home=C:\BI11\WLSERV~1.3 -Dwls.home=C:\BI11\WLSERV~1.3\server -Dweblogic.hom
e=C:\BI11\WLSERV~1.3\server -Dcommon.components.home=C:\BI11\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk
14Logger -Ddomain.home=C:\BI11\USER_P~1\domains\BIFOUN~1 -Djrockit.optfile=C:\BI11\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config
.dir=C:\BI11\USER_P~1\domains\BIFOUN~1\config\FMWCON~1\servers\AdminServer -Doracle.domain.config.dir=C:\BI11\USER_P~1\domains\BIFOUN~1\config\FMWCON~1 -Digf.a
risidbeans.carmlloc=C:\BI11\USER_P~1\domains\BIFOUN~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\BI11\USER_P~1\domains\BIFOUN~1\config\FMWCON~1\arisidprov
ider -Doracle.security.jps.config=C:\BI11\USER_P~1\domains\BIFOUN~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\BI11\USER_P~1\domains\BIFOUN~1\
servers\AdminServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\BI11\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\BI11\ORACLE~1
\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dbi.oracle.home=C:\BI11\Oracle_BI1
-DEPM_ORACLE_HOME=C:\BI11\Oracle_BI1 -Dweblogic.MaxMessageSize=50000000 -DEPM_ORACLE_HOME=C:\BI11\Oracle_BI1 -DHYPERION_HOME=C:\BI11\Oracle_BI1 -DEPM_ORACLE_IN
STANCE=novalue -Dhyperion.home=C:\BI11\Oracle_BI1 -DEPM_REG_PROPERTIES_PATH=C:\BI11\USER_P~1\domains\BIFOUN~1\config\fmwconfig -Depm.useApplicationContextId=fal
se -Doracle.biee.search.bisearchproperties=C:\BI11\Oracle_BI1\bifoundation\jee\BISearchConfig.properties -Dweblogic.management.clearTextCredentialAccessEnabled=
true -Doracle.notification.filewatching.interval=2000 -Dweblogic.security.SSL.ignoreHostnameVerification=true -Dweblogic.security.SSL.enableJSSE=true -Dfile.enc
oding=utf-8 -Doracle.ecsf.security.service=oracle.biee.search.security.BISearchSecurityService -Doracle.ecsf.configuration.class=oracle.biee.search.services.BIS
earchServiceConfiguration -Dxdo.server.config.dir=C:\BI11\user_projects\domains\bifoundation_domain\config\bipublisher -DXDO_FONT_DIR=C:\BI11\Oracle_BI1\common\
fonts -Dem.oracle.home=C:\BI11\oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dw
lw.logErrorsToConsole=false -Dweblogic.ext.dirs=C:\BI11\patch_wls1035\profiles\default\sysext_manifest_classpath weblogic.Server
[WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
<Apr 10, 2012 3:07:11 PM CEST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable thi
s check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Apr 10, 2012 3:07:11 PM CEST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disabl
e this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true><Apr 10, 2012 3:07:12 PM CEST> <Info> <WebLogicServer> <BEA-000377> <Starting We
bLogic Server with Oracle JRockit(R) Version R28.1.3-11-141760-1.6.0_24-20110301-1429-windows-ia32 from Oracle Corporation>
<Apr 10, 2012 3:07:12 PM CEST> <Info> <Management> <BEA-141107> <Version: Weblogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Apr 10, 2012 3:07:14 PM CEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Apr 10, 2012 3:07:14 PM CEST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Apr 10, 2012 3:07:15 PM CEST> <Notice> <Log Management> <BEA-170019> <The server log file C:\BI11\user_projects\domains\bifoundation_domain\servers\AdminServer
\logs\AdminServer.log is opened. All server side log events will be written to this file.>
Apr 10, 2012 3:07:23 PM oracle.security.jps.internal.igf.ovd.OvdIGFServiceProvider pushLdapNamesTolibOvd
SEVERE: JPS-02592
<Apr 10, 2012 3:07:23 PM CEST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception sta
ck trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Er
ror message: JPS-02592: Failed to push ldap config data to libOvd for service instance "idstore.ldap" in JPS context "default", cause: org.xml.sax.SAXParseExcep
tion: <Line 2, Column 1>: XML-20108: (Fatal Error) Start of root element expected.>
<Apr 10, 2012 3:07:23 PM CEST> <Critical> <WebLogicServer> <BEA-000386> <Serversubsystem failed. Reason: weblogic.security.SecurityInitializationException: The
loading of OPSS java security policy provider failed due to exception, see theexception stack trace or the server log file for root cause. If still see no obv
ious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-02592: Failed to push ldap config data to libOvd f
or service instance "idstore.ldap" in JPS context "default", cause: org.xml.sax.
SAXParseException: <Line 2, Column 1>: XML-20108: (Fatal Error) Start of root element expected.
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message:JPS-02592: Failed to push ldap config data to libOvd for service instance "idsto
re.ldap" in JPS context "default", cause: org.xml.sax.SAXParseException: <Line 2, Column 1>: XML-20108: (Fatal Error) Start of root element expected.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: JPS-02592: Failed to push ldap config data to libOvd for service instance "idstore.ldap" in JPS context "def
ault", cause: org.xml.sax.SAXParseException: <Line 2, Column 1>: XML-20108: (Fatal Error) Start of root element expected.
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
Truncated. see log file for complete stacktraceCaused By: oracle.security.jps.JpsException: JPS-02592: Failed to push ldap conf
ig data to libOvd for service instance "idstore.ldap" in JPS context "default",cause: org.xml.sax.SAXParseException: <Line 2, Column 1>: XML-20108: (Fatal Erro
r) Start of root element expected.
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2855)
at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3099)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:164)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.service.idstore.IdentityStoreException: JPS-02592: Failed to push ldap config data to libOvd for service instance "idstore.ldap"
in JPS context "default", cause: org.xml.sax.SAXParseException: <Line 2, Column1>: XML-20108: (Fatal Error) Start of root element expected.
at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider$NoLibOvd.getInstance(LdapIdentityStoreProvider.java:341)
at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider.getInstance(LdapIdentityStoreProvider.java:118)
at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider.getInstance(LdapIdentityStoreProvider.java:74)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.service.igf.IGFException: JPS-02592: Failed to push ldap config data to libOvd for service instance "idstore.ldap" in JPS context
"default", cause: org.xml.sax.SAXParseException: <Line 2, Column 1>: XML-20108: (Fatal Error) Start of root element expected.
at oracle.security.jps.internal.igf.ovd.OvdIGFServiceProvider.pushLdapNamesTolibOvd(OvdIGFServiceProvider.java:321)
at oracle.security.jps.internal.igf.ovd.OvdIGFServiceProvider.prepareDataPush2libOvd(OvdIGFServiceProvider.java:370)
at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider$NoLibOvd.getInstance(LdapIdentityStoreProvider.java:339)
at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider.getInstance(LdapIdentityStoreProvider.java:118)
at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider.getInstance(LdapIdentityStoreProvider.java:74)
Truncated. see log file for complete stacktrace
Caused By: org.xml.sax.SAXParseException: <Line 2, Column 1>: XML-20108: (FatalError) Start of root element expected.
at oracle.ods.virtualization.engine.config.parsers.ConfigErrorHandler.fatalError(ConfigErrorHandler.java:101)
at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:432)
at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:414)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:356)
Truncated. see log file for complete stacktrace
Caused By: org.xml.sax.SAXParseException: <Line 2, Column 1>: XML-20108: (FatalError) Start of root element expected.
at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)
at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:414)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:355)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:226)
Truncated. see log file for complete stacktrace
>
<Apr 10, 2012 3:07:23 PM CEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Apr 10, 2012 3:07:23 PM CEST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Apr 10, 2012 3:07:23 PM CEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
help me please
Thanks.
Edited by: 842284 on 10 avr. 2012 07:41

Hi,
Please navigate to the fmwconfig folder and check the adapters.os_xml file.
$DOMAIN_HOME/config/fmwconfig/ovd/default/adapters.os_xml
There are chances the adapters.os_xml file could be corrupted due to which the Weblogic server fails to start.
Please verify if the adapters.os_xml file is valid.
In case the file is corrupted, please perform the following steps :
1) Take a backup of $DOMAIN_HOME/config/fmwconfig/ovd/default/adapters.os_xml
2) Delete $DOMAIN_HOME/config/fmwconfig/ovd/default/adapters.os_xml
3) copy adapters.os_xml from $MW_HOME/oracle_common/modules/oracle.ovd_11.1.1/templates/ to $DOMAIN_HOME/config/fmwconfig/ovd/default/
4) Restart the server.
Regards,
Kal

Verify this account - problems getting started in iCloud

Similar Messages

Maybe you are looking for