Verifying and repairing in Snow Leopard not working

Hi everyone.
I have a white MacBook (3,1) running Snow Leopard, Mac OS X 10.6.8. My computer was running extremely slowly so I opened the Disk Utility to try to repair it. Disk Utility told me I needed to run my Snow Leopard installation disk and verify disk permissions from there. I did so, and even though the estimated time said 27 minutes, it ran overnight, generated a long list of broken permissions, and nothing else happened. I rebooted and now I could select "Repair Disk Permissions", so I did so, and again, the estimated time was 25 minutes but nothing happened.
From browsing the support community I see that this is a known issue with Snow Leopard. What can I do to verify and repair permissions so I can then verify and repair my disk? I would appreciate any information whatsoever.
Thanks,
Christine

Try it this way:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Similar Messages

Disk utility - Verify and repair disk permission does not work

On my dual i'm trying to make a verify and than a rpair disk permission but the bar stop after a while and will never finish (even if the estimaed time is less than one minute).
Ideas?
mg

Same boat... here's my thread from early this week:
http://discussions.apple.com/thread.jspa?threadID=1403467
Haven't had time to test the suggestion yet though.

Time Machine to Snow Leopard not working

Ok, so this issue appears to be multi-faceted so please bear with me as I try to fully explain what's happening.
I have a mid-2009 Macbook Pro with OSX 10.6.8, and I decided to give Yosemite a try since it was free. Before upgrading, I did a Time Machine backup on an external 500GB WD drive in case I wanted to switch back to Snow Leopard.
I did the upgrade, but wasn't very pleased with the results. Seeing as how the computer was older I figured it would slow down a touch, but what broke the deal was when I tried to run After Effects and had plugins - that never gave me trouble before - crashing. I decided to restore from Time Machine and rebooted into Recovery Mode. However, by accident I selected the External Drive with the backups as my boot disk. I quickly rebooted AGAIN and selected the Recovery drive, but the TM drive wasn't showing up when I tried to access it for the backup.
I rebooted back to Yosemite and found that the drive was not mounting despite lighting up and making spinny sounds. Disk Utility could see it but was unable to repair, so I used DiskWarrior instead. Everything seemed to work out ok and the drive was reading on my desktop as a TM backup. I rebooted AGAIN to recovery mode, selected the appropriate backup, and let the computer do it's work overnight.
When I woke up in the morning and checked in on it, I got an error message saying that the restoration had FAILED at some point along the way. I tried to reboot normally, but the grey screen of death would appear after a few seconds and I'd have to shut down.
I went back to Recovery mode, tried to access the TM drive, but once again it was not showing up! So I reinstalled Yosemite and was able to login to my desktop. The TM drive was still showing up, and according to a reinstalled DiskWarrior the drive was fine. I rebooted in Recovery, selected the TM backup, and it only took about 20 minutes before the restoration failed! This time the computer appeared to be wiped clean, with no OS.
Fortunately I still had my Snow Leopard install DVD, so I managed to reinstall it from there. However, now I CANNOT login. My username shows up but the password I've used for FOUR YEARS is constantly rejected. I can't even login to the GUEST account!
If you've made it this far, PLEASE HELP!!!!

Pondini - I have an issue too. And so I went to the troubleshooting tips you listed here and was not able to find a solution. Specifically, I don't get a message. I plain ole don't get nothing. After I installed Snow my first backup failed. Funny thing is the backup on my wifes computer also failed. She does not have an Intel Mac. It's a PowerBook G4. Hence no Snow Leopard there. I have a iMac 24 Aluminum. My Time Capsule backup worked fine until Snow. My TC is wired via ethernet. There is no latest date. When Time Machine backup starts the TM preference pane says it's "Making disk available" Something to that effect. And that's where it stays. If I then try to do anything with the preference panel - like close it - I find out the Preferences are not responding. So I force quit. I try to stop Time Machine backups and it's no good. The TM indicator - that little backwards running clock - in the menu bar just keeps on it's merry little way. The only way to stop it - shutdown. Strange thing is shutdown then refuses to - well, shutdown. I end up having to hold the power button for 5 seconds. I don't get error messages. I get nothing indicating what may be causing this problem. I have been searching these and other forums looking for an answer. I had hoped the user tips you listed would have a solution, but, alas, no. I deleted the timemachine plist in the "higher" library. No luck. I have powered down everything. No luck. Those were two ideas I saw that said they worked. So where do I go from here? Where do I look for error messages that will point me in the right direction? I'd appreciate any help from anybody.

Macbook Aluminium. Single, long beep upon startup and update to Snow Leopard wont work.

Hi, I recently formatted my late-2008 Macbook and installed Ubuntu. It didn't work so I formatted again and installed Leopard. When I boot I get a single long beep. When I try to update to Snow Leopard and reboot the OS still shows up as 10.5 (Leopard).
It seems to function normally besides all this. I have not touched the memory in this time and the OS recognises the full 4GB I have inside. I also did not touch the hardware, this whole problem seems to have been caused by my attempt to install Ubuntu.
Any help out there?
Thanks guys.

I have exactly the same problem for some days because I installed Ubuntu 11.04. Thanks God I found a way to fix it:
https://discussions.apple.com/message/15375400#15375400
Go to the video on youtube and see how you got your EFI firmware flashed Reboot and the long beep should go away

Airport Extreme Wireless Printing with Snow Leopard Not Working

I have two base stations in my home office: an Airport Express that's connected to the cable modem, and an older Airport Extreme (A1034) that's connected to my printer on the other side of the room. They were networked together so that I could go online or print wirelessly without a problem, until I upgraded to Snow Leopard. Now I can go online, and I can print directly from a USB cable to my HP printer, but I can't print wirelessly. The Extreme doesn't seem to show up at all in Airport Utility. Is there a way to get this to work again? Thanks.

Yes, I do have the latest drivers. I can print directly to the printer through USB. I don't seem to be able to access the Airport Extreme base station though.

Snow Leopard not working after installation

After successful installation of Snow Leopard on a new internal hard drive (connected through IDE to SATA adapter) in my Macbook (late 2006), it is not working. No icon is clickable, only cursor can move. Please help!

The OSX 10.6.3 was successfully installed from the DVD. This is the screen after booting. But it is frozen. There is no response to clicking any of the icon in the deck or in the menu bar. I can only move cursor. That's all.

Isight not working with skype and tokbox after snow leopard upgrade

Recently, I upgraded from Tiger to Snow Leopard. After the upgrade, I found that my built-in iSight camera wasn't recognized on TokBox. On Skype, it said that the iSight camera was in use by another application (however no other applications were running). The iSight is working with iChat, so I don't know what is wrong... everything was fine when I was using Tiger!

hellokitty650 wrote:
Okay, so I restarted my computer and that didn't work.
Then, I went through the suggestions from the link you posted. I found that the iSight works in iChat and Photobooth; however, it does not work in iMovie HD (exactly the same in both user accounts on my computer). Just like before, the iSight is "in use by another application" in Skype on both user accounts.
I reset the SMC, but it didn't seem to help anything. Everything was acting the same as before I reset it.
I also noticed that my iTunes and my iMovie won't open; they both quit unexpectedly every time I try to open them. This happens in both user accounts as well.
Okay, so it will be simplest to work your issues in steps. We will start with iMovie.
Use your Mac's Disk Utility to repair permissions. Then reinstall iMovie HD 6. Repair permissions again after the installer finishes.
If the version of iMovie HD 6 in your iLife '06 DVD is not "6.0.3", download and install the update:
http://support.apple.com/kb/DL319
If you need to do this update, repair permissions again after the update is finished.
Test the reinstalled iMovie HD 6 to see if it works in more than one user account and post back the results.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

HT1338 I installed Mac OSX Snow Leopard 10.6.3 And now my Java is not working, what can I do to fix's this?

I installed Mac OSX Snow Leopard 10.6.3 And now my Java is not working,what can I do to fix's this?

Run Software Update to get to 10.6.8 and update Java.

I have a black MacBook from 2008 and tried downloading snow leopard 10.6. It told me I had to restart my computer. However once I restarted my MacBook my touchpad and keyboard were not working so I am unable to sign in. I have no idea what the problem is

I have a black MacBook from 2008 and tried downloading snow leopard 10.6. It told me I had to restart my computer. However once I restarted my MacBook my touchpad and keyboard were not working so I am unable to sign in. I have no idea what the problem is

You cannot download the upgrade to Snow Leopard.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer)
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
         3. MacBook Pro (Mid/Late 2007 or newer)
         4. MacBook Air (Late 2008 or newer)
         5. Mac mini (Early 2009 or newer)
         6. Mac Pro (Early 2008 or newer)
         7. Xserve (Early 2009)
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     Am I eligible for the free upgrade?
         See Apple - Free OS X Mountain Lion upgrade Program.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Just purchased a ipad2, could not us it on my MacBook 10.4.1 - Purchased and installed OSX Snow Leopard 10.6.3 - downloaded and installed latest itunes, set up a itunes accounts and tested by purchasing an album and app, ipad does not show in devises?

I just purchased a ipad2, it would not work on my MacBook 10.4.1 I purchased and installed OSX snow leopard 10.6.3 downloaded and installed the latest itunes, set up an itunes account, purchased some music and apps. When i plug in my ipod it shows up and works, but when i plug in my new ipad the ipad screen comes up with a display of a cable and itunes but does not show in devises, i have tried all the resets and different USB ports with no success. Any ideas short of selling it on ebay or buying a new computer?

If you've already tried the usual rebooting of the computer and ports and stuff, there is only a few things left I can think of. It's possible that when you updated iTunes it didn't fully replace all the files, so I suggest just manually removing iTunes and then reinstalling it.
Try removing iTunes manually first http://support.apple.com/kb/HT1224 then download a fresh copy, make sure it is 10.3.1
It is essential that you go through Finder to remove those files it mentions. Otherwise they won't be reinstalled when you run the installer again.

HT5055 Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works

Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works can you help

Open "Java Preferences" either from spotlight or your utilities folder...it's probably going to say you need to install a java runtime. Then just click install!

My external HD stopped showing up on my desktop, but shows up in my Disk Utility.. I have tried a disk verify and repair - sometimes that works and completes, sometimes it doesn't. Either way, it wont eject or mount, and still doesn't show up on desktop.

My external HD stopped showing up on my desktop, but shows up in my Disk Utility..
I have tried a disk verify and repair - sometimes that works and completes, sometimes it doesn't.
Either way, it wont eject or mount, and still doesn't show up on desktop.
There are no ticking noises coming from the hard drive, and it lights up still, and i have tried replacing the cords, and restarting/shutting down the computer, and have tried it on a mac desktop also - same problem.
Any help would be great!!!

and have tried it on a mac desktop also - same problem.
Try this on one of the Macs ...
Open a Finder window. From the menu bar click Finder > Preferrences
Select the General tab then select: Show External Disks

After hard drive crash, Pages app brought over, and upgrade to snow leopard installed, Pages would not launch. Re-downloaded the 3.0.3 update and Pages launched, but will not open any documents or start new document.

After a hard-drive crash, Pages application was brought over from the old hard drive, and upgraded to snow leopard. However, Pages would not launch. I do not have the disks and the computer was given to me by my son with iWork 08 installed, so I do not have the ability to re-install using Purchases. I re-installed the update 3.0.3, which I already had, but thought it worth a try. That enabled Pages to launch, but it will not open a new or old document. I can see in preview the document, but it will not open. Any suggestions besides repurchasing Pages. I've just put out a lot of money for a new hard drive and retrieval of apps and docs from the old hard drive and would like not to have to put more money in it.
Thanks for any suggestions.

You can not simply drag over Pages, particularly if it was perhaps damaged in a crash.
As it was only Pages '08 it may be time to upgrade to Pages '09 from the App Store. It is not that expensive and will allow you to install it on any Mac sharing the same Apple I.D. and protect you from a repeat of this problem.
There are free alternatives to Pages if you are hard strapped, it depends on what you are using Pages for, it is not the only option by far.
Peter

Why can a person buy and/or download Snow Leopard, Lion, and Mountain Lion but not Mavericks???

I am running OS X Lion on a mid 2009 MacBook Pro with 4GB of ram and a 160GB HDD. I was going to download Mavericks from the app store but waited to long. Now that Yosemite is out Mavericks has disappeared from the app store. WHY? A person can buy and/or download Snow Leopard, Lion, and Mountain Lion but not Mavericks??? And the kicker is that it was FREE!!! I just wanted to load Mavericks on my MacBook Pro to see how it performs. If I could live with any slow downs or quirks, I'd leave it installed. If not, I'd roll my system back. Apple's policy of ramrodding unstable product down our throat is BS. I don't want to use Yosemite until it has become more stable!

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.

I upgraded from leopard to lion and my epson printer will not work. I get a communication error

I upgraded from leopard to lion and my Epson printer will not work. I get a error message comunication error. What can Ido to fix this I bought a new USB cord and it did no good.

I suddenly had the same thing happen. I've had my new iMac for 3 months and at first my Epson Artisan 50 worked okay then yesterday I started getting the same error message other people on this support site have gotten. I tried ALL the advice given (deleating the Epson files from the library folder, etc. reinstalling older software) and nothing worked. With the newest iMac (and operating system) you cannot pick and choose which version of Epson software you want. You must use the 10.8 version or it simply will not open when you've downloaded it. Finally I found the comment above by den.thed and tried the OS X Mountain Lion: Reset the printing system suggested. As much as I hated to lose all my printing presets that took a lot of expiermentation to set up, I was desperate. I tried it and it worked. Now I just have to consult my old computer and try to recreate all my printing set ups. So to others with Epson / Apple 10.8 issues this may help when everything else fails. Thanks den.thed for your advice.

Verifying and repairing in Snow Leopard not working

Similar Messages

Maybe you are looking for