Verifying ipad restore with apple takes too long

I did all the steps as guided to restore my Ipad the 3rd. However, it seems to get stuck with the message "verifying ipad restore with Apple". How can I restore?

Not sure if you are using iTunes or not. However, detach iPad if connected to iTunes, go to Settings, Reset (scroll to the bottom), Erase all Contents and Settings .... and start again!
If you cannot get out of the current screen o do the above then do a Reset first [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe!

Similar Messages

  • How long does verifying iPad restore with Apple take after upgrading?

    How long does verifying iPad restore with Apple take after upgrading iTunes?  It's been hours & my pc won't let me close because of it.

    Should happen immediately...are your firewalls & anti-virus software turned off? If not, turn all of that stuff of & try again.

  • HT1414 when trying to restore my ipad gen 1 it hangs on "Verifying ipad restore with Apple" then returns an error 1602

    I have tried to restore my ipad gen 1. When it gets to the Verigying ipad restore with Apple" it seems to hang then returns the error 1602. I have the black screen on my ipad so cannot get to the shut down bar. The ipad has not been tampered with or jail broken. it suddenly would only show the apple symbol for 5 or so seconds then go to a blank screen and then 30 or so seconds later show the apple symbol again. This only happens when plugged into its factory charger.

    Have you tried the troubleshooting on this page : http://support.apple.com/kb/TS3694#error1603 ?

  • "verifying iPhone restore with Apple" - FAIL

    I have downloaded iOS4 into itunes 9.2 and upgrade to iOS4 fails consistently ... with "verifying iPhone restore with Apple" ... please try again later?
    Any ideas? please?

    I posted some ideas and possible ways to fix this here, http://discussions.info.apple.com/thread.jspa?threadID=2475963&tstart=0
    hope it helps

  • Stuck on 'verifying iPhone restore with Apple' downloading ios 5

    Does anyone else have this same problem? Stuck on 'Verifying iPhone restore with Apple' Its been doing this for well over an hour now with the black and white bar moving underneath.. also it shows the picture on my iPhone that i need to plug it into iTunes.. with every now and then a refresh with the Apple logo... please help!

    I've got an original iPhone running 3.1.3 and my symptom has been that when the phone is plugged in, I see the phone in the menu, and I get the message "Verifying iPhone..." for 15 seconds or so, then the phone displays "Sync in Progress" but iTunes drops the phone from the menu and shows no sync activity. The phone continues to say "Sync in Progress" but there is no sync happening. [I've ordered a 4S but I don't want to be unable to sync this old device!!]
    PS I kept trying a number of times - the phone is visible, then it disappears - I'm not sure this was the key, but when I switched my phone from being plugged into a usb hub, and plugged it in directly, it finally stayed connected, backedup, and seems to have synced correctly.

  • IPhone sync with iTunes takes too long

    Why does the sync process take so long? I have a large address book and a few gigs of media, but the sync process sometimes takes almost 20 minutes! It's ridiculous. Any advice.

    Hi,
    I'm using the new USB cable that came with my iPhone that I bought yesterday. Not sure if it's USB 2.0.
    My iPod from a few years ago uses a Firewire cable.
    My music is on an external LaCie hard drive.
    The transfer rate of songs from my external to my iPhone is about a minute per song. However, the transfer rate of songs from my external to my iPod is about 5 seconds per song.
    I just think that's a dramatic difference in time but am wondering if that's expected behavior or if there might be something wrong with my iPhone.
    Thanks.

  • TS1702 Since updating ipad to 7IOS videos take too long to download and when playing they often stop

    Since updating my ipad to 7IOS videos are too slow to download and often stop when playing.  Any suggestions?

    Since updating my ipad to 7IOS videos are too slow to download and often stop when playing.  Any suggestions?

  • Tried to restore and update iPhone 3GS, has been in the "verifying restore with apple" stage for an hour. what should i doo?

    okay, so lately my iPhone 3GS has been telling me i have no service what so ever for the past two days. But today when i was on the bus going home from school, i had perfect service and everything until i got close to my house (to clarify, i live somewhat far out from the center of town, and my school is right in the middle of town.. didnt know if that would affect anything). So then i asked my Dad about it and he reccomended restoring and updating my phone to see if it helped because im a couple updates behind. So i plugged it in, backed it up, and began to restore and update it. All was well until it got to the "verifying the restore with apple" stage. I was watching the rose bowl and not paying attention while it was on, but remembered that it started that stage at the beginning of the game. Now the game just ended 5 or 10 minutes ago and lasted a goood hour, hour an a half, and its still verifying!! i dont know what to do... HELP!

    Did you check the security software settings? iTunes has to be able to contact Apple during the update process: iTunes for Windows: Troubleshooting security software issues

  • Ipad in recovery mode tells me to plug it into itunes to restore. and error (40) pops up after verifying restore with apple.

    My Ipad 2 is in recovery mode it tells me to plug it into itunes to restore.Once I do an error (40) pops up after while verifying restore with apple. I called and they said it was with my norton security so I shut everything off  on norton and tried again but it still comes up with the same thing. Is there anyone that could help please!!

    Same thing happened here ~ tech guy at a local authorized Apple repair store said it had something to do with improper backup from which the restore would be made. Still have a phone that asks to be connected to Itunes but won't do anything else . . . frustrated.

  • Why ipad 2 / iphone 3g resetting takes too long?

    Im trying to reset and delete all content of my ipad and iphone 3g by choosing the selections about resetting on the general. Why it takes too long to reset my ipad / iphone 3g? It is almost 2 days my ipad are on the apple logo / looping circle appears on it and still im waiting for my ipad / iphone 3g to return to main screen.  What will i do? Thanks...

    There is no other way except to restore the iPad - plain and simple. You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    You will need to use recovery mode
    iPad: Unable to update or restore

  • Ipad 4th gen retina display takes too long downloading apps

    I have a Ipad 4th Gen ios 6.1.3. When i tap the app store icon it takes too long to show the info. The same occurs when i itry to install some apps. Comparing with a Asus Memo Pad 10 is slower what does not have to be. My network runs till 200mbps and the ipad has full power and full wi-fi connection.
    Is there a problem of comfiguration or other?.
    Thank you very much for the help.

    Have you tried this:
    1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
    2. Hold the Sleep and Home button down until you see the Apple Logo.

  • HT4352 apple tv takes too long to load photos

    I am running iTunes (11.1.5.5) on Windows 7 and have setup home sharing and accessing the Photo Library from Apple TV 3rd Generation.
    We have a lots of photos (approx 21000) organizaed in folders, eg:
    Main Photo Folder
    Folder 1 (5500 photos)
    F1-Sub 1
    F1-Sub 2
    F1-Sub 3
    Folder 2 (3500 photos)
    F1-Sub 1
    F1-Sub 2
    F1-Sub 3
    Folder 3 (12000 photos)
    F1-Sub 1
    F1-Sub 2
    F1-Sub 3
    Apple TV doesn't show the sub-folders beyond the first set of folders and as a result it takes too long to load our list of photos, is there anything that can be done to fix this?
    Thanks!

    I am having exactly the same issue. Moved house and now starting a movie takes minutes, not seconds... I've got both the Mac and ATV connected via ethernet to my Airport Extreme base station, but have no explanation for this bizarre slowdown. I also don't have internet currently, but I can't understand with content not purchased on iTunes, why that would make any difference...?

  • Apple TV Gen 3 takes too long to load 15,000 photos. Do I need to go back to ATV Gen 1?

    I just purchased Apple TV (Gen 3) It takes too long to load my over 15,000 photos for viewing.   This was never a problem with my ATV (Gen 1).  Do I need to go back to ATV Gen 1?

    Do you have a technical question?
    What have you done to troubleshoot?
    Typically issues like this are related to the local network. First thing would be to try ethernet, if on wifi. Make sure router is up to date. Reboot ATV, router.
    You can go to istumbler (Mac) or netstumbler (PC) to get a report of the network.

  • What can I do when my iphone 4 take too long to restore? It only has 1 song on it

    What can I do when my iphone 4 take too long to restore? It only has 1 song on it and 1 additional app beside the standard apps.
    The circle in the middle of the phone has been spinning from after 4 yesterday afternoon until now. Please help me

    I'm having the same problem.  I got error message 21.  I went to apple store.  they are saying i have a hardware error.  Really, my phone was working before the update.  Asked me for $150 to get another one when I am due to get a new one and wanted to pass this one on to my child. 
    Help please,
    I will be glad to go back to the older software update

  • AME CS6 rendering with AE and Pr takes too long

    Hi Guys,
    Need some help here. i have rendered a 30 secs mp4 video with 1920 x 1080 HD format 25 frames w/o scripting in AME for 4 hours!
    Why does it take too long? I have rendered a 2 minute video with same format w/ scripting but only spare less than 30 minutes for rendering.
    Im using After Effects and Premium Pro both CS6 and using Dynamic Link in AME.
    What seems to be wrong in my current settings?
    Any help would be appreciated.
    Thanks!

    This may be a waste of time, but it won't take a minute and is something you should always do whenever things go strangely wrong  ............ trash the preferences, assuming you haven't done it already.
    Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
    http://www.digitalrebellion.com/prefman/
    Shut down FCP X, open PreferenceManager and in the window that appears:-
    1. Ensure that only  FCP X  is selected.
    2. Click Trash
    The job is done instantly and you can re-open FCP X.
    There is absolutely no danger in trashing preferences and you can do it as often as you like.
    The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones  .  .  .  instantly.

Maybe you are looking for

  • Folder Image Counts in LR not updating

    LR Version Running: v4.1 Catalog Size: 27176 images spreadout over approximately 150 folders Primary Problem: The image counts represented on folders in LR are not reflecting accurate counts until I run "Synchronize Folder" option.  This occurs on a

  • SB Live! 24bit Crackling so

    Hello , Im new to this forum and I have problems with my new card. First of all I have to tell I ve been dealing with this problem since last Friday and Ive also returned the card to the shop where I bought it. They said no problem with the card and

  • Can not print Report to printer

    Hello, I am printing a report using the run_report_object and can not print to printer when the report returns some data. When there is no data returning, the report prints fine from printer and it prints only the header. On the other hand, when the

  • Installing NIDAQ 7.5 cause error in VB6 "nidaq32.dll not found"

    Hi, Anyone had this problem? I installed the NI-DAQ 7.5 drivers because I've been trying to get an application working with my 6533 card which just had DAQmx support added for it in 7.5. I have old code in VB6 that makes straight driver calls that I

  • Install Authorware in Safari 4?

    I'm running Safari 4.0.3 on Mac OS 10.5.8 and have been unable to install Authorware. Has anyone gotten this to work? It works fine in Firefox 3.5.3.