Verifying that GPIB device is working
I have two Stanford Research Systems devices, one is a SR400 two channel gated photon counter and the other is a 4 channel digital delay/pulse generator. I want to see if LabView can communicate with them and collect data from them. I don't have anything in specific that I want to do as of yet, I just want to make sure that they are working properly in conjuction with LabView 7.1. I am running Windows XP. Thanks for any help.
There's a SR400 driver that you can download from here. There's a DG535 digital delay/pulse generator driver that you can download here (you didn't specify the model). Assuming that you've already verified that the GPIB board is functioning in MAX, after you install the drivers, run an example VI or the "Init" VI in each.
Message Edited by Support on 12-22-2008 09:39 AM
Similar Messages
-
Iphone 4S will not charge, error that USB device not working, found any suggestions?
iphone 4S will not charge, error that USB device not working, found any suggestions?
Hello Chambless,
The troubleshooting steps below can help get your iPhone to charge.
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Cheers,
Allen -
I have gone in and ensured the MTP is selected on my phone but it still doesn't show up on my computer for me to transfer the files.
I believe it's Samsung drivers. I'm just hooking my phone up to the
laptop. Everything installs on its own. Then I'll get the message that
says the process hosting the driver for this device has terminated. I've
Uninstalled and restarted my computer and my phone and its still saying the
same thing. -
I don't know how to proceed. I didn't have sound after installing Windows 7 inot iMac OX 10.6.7 (64bit) After unsuccessful attempt to upgrade the driver from the BootCamp file, I deleted the driver from the Sound and Game controlled hoping that I would allow me to automatically install the correct driver from Boot camp.
Now the Sound Video Game controller disappeared from the Device Manager
How can I find out which is the correct sound driver for my computer (The Speaker Properties only say:WIndows)?
How can I install it without seing the Sound and Game controller in the Device Manager?When you say "manually download", you mean from the BootCamp File on Snow Leopard, or from the Internet.
My additional problem is that the "Sound and Video Game Controller" disappeared from the Device Manager when I removed the previous driver. I don't find the place where I can reistall the new driver. -
GPIB-ENET not working in Windows NT 4.0
I have a GPIB-ENET device and I want to configure it with Windows NT4.0 I
have install everything like it is said in the NI web site and everything
seems to be fine. When I try to talk to the instruments with Win32
Interactive Control (IBIC) it works.
I have created an application (In Visual C++ and the ComponentWorks++) to
communicate with the GPIB device wich work perfecly on Windows 98, and I
have a VI who also works well with Windows 98 but none of them works on
Windows NT4.0. When I connect to the GPIB device I use "GPIB0::2::INSTR" as
the address of the GPIB instruments and it work with win98, but doesn't with
NT.
I can see the GPIB-ENET device but where or how can I see the instruments
that are pluged i
n the GPIB-ENET? What are there connection string
"GPIB0::????"
Is the problem in my application or in the configuration of Windows NT?
Anybody had this problem?
thanks in advance
[email protected]I has similar problem before update GPIB-ENET driver to version 1.2, On some
systems with NT4 downgrade VISA 2.6 to VISA 2.5 may help - from old CDs for
LV5.1
"Eric Clermont" wrote in message
news:[email protected]..
> I have a GPIB-ENET device and I want to configure it with Windows NT4.0 I
> have install everything like it is said in the NI web site and everything
> seems to be fine. When I try to talk to the instruments with Win32
> Interactive Control (IBIC) it works.
>
> I have created an application (In Visual C++ and the ComponentWorks++) to
> communicate with the GPIB device wich work perfecly on Windows 98, and I
> have a VI who also works well with Windows 98 but none of them works on
> Windows NT4.0. When I conn
ect to the GPIB device I use "GPIB0::2::INSTR"
as
> the address of the GPIB instruments and it work with win98, but doesn't
with
> NT.
>
> I can see the GPIB-ENET device but where or how can I see the instruments
> that are pluged in the GPIB-ENET? What are there connection string
> "GPIB0::????"
>
> Is the problem in my application or in the configuration of Windows NT?
> Anybody had this problem?
>
> thanks in advance
>
> [email protected]
>
> -
I have the same problem, MSVCR80.dll. I "uninstalled", but can't "install" , get error message "Service "apple mobile device" failed to start. Verify that you have privleges to start service. No option works. HELP !!!! I'm NOT a computer geek !
Follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 and note especially to run as admin.
-
The iTunes upgrade didn't complete. Message comes up that says: "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privideges to start system services." ...And neither Abort, Retry, or Ignore work.
Hi DaHare,
Thanks for using Apple Support Communities. If you are having trouble with Apple Mobile Device Service starting correctly, this article has steps you can take:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Cheers,
- Ari -
While updating my iTunes this message came up "Service 'apple mobile device' (apple mobile device) failed to start. Verify that you have sufficient privileges to start system services" what can I do to get my iTunes to work again?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Hi Communitiy.
I have a window desktop and have had itunes for ever. The latest update failed and I am getting a strange error message. "Apple mobile Device failed to start. Verify that you have sufficient privledges to start system service."
I have iphones and I am wondering if a sync of iphone and I tunes has somehow screwed up everything.
The update will not load. I have even tried uninstalling itunes and reinstalling.
I get the same exact message as before.
I am stuck as to what to try or do.Hello Clage,
The following article provides steps that can help get the Apple Mobile Device service sorted.
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Cheers,
Allen -
Not sure what to do. I've tried a system restore on my computer after the update in hopes of undoing the problem, that didn't work. I've tried to install, the new version of itunes for over two days now and I get to the point where it says "starting services" and it almost get's done and then it gives me that message " Service apple mobile device (apple mobile device) failed to start. Verify that you have sufficient privledges to start system services." Then it gives me three options to click on "abort", "retry" or "ignore". I've tried to retry over and over and it does no good, I just get the same message. I've tried ignore and the one time it did finish installing itunes, it didn't work, I got error messages telling me that it failed to download properly and I needed to delete the program and download it again. I thought maybe it had something to do with my ipod not being pluged into the computer so I pluged that it and it's still giving me the same message. I just don't know what to do. I'm very frustrated and I would really appreciate it if someone could help me. I'm completely out of ideas.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Ihave tried everything that Apple has asked and it keeps giving me the same message. First I get this message
"An error has occdurred during installation assembly "Microsoft vc80.crt.type.win32"...verision "8.0.50727.4053" public key token=1fc8b3b9a1e18e3b" processor architecture="amd64" please refer to help and support for more information. HR result 0x8057054F
then i click ok and it backsup and reinstalls it and i get this message..."Service apple mobile device device failed to start. verified that you have sufficient privileges to start system services."
I have deleted everything itunes/apple on the laptop, i am the administrator and created another account on my computer that was administrator and i have ran the fix it tool, and have reinstalled apple itunes and still get the messages. i have deleted all virus protectors, took my firewall down. and still same errors. i just got an iphone 4 with no music and I cannot afford to pay for my music when i can just put it on there.
PLEASE HELP ME!!!! I am at the end of my witts with this thing.Go tot the Apple support troubleshooting area I had the same problem. You have to remove all the apple stuff in a particular order then reinstall/dowmload i tunes again it worked for me, a pain yes! But I now have Outlook loading issues so if anyone knows what that problem is and how to solve it please let me know
-
When trying to download the new version of ITunes, I kept encountering a dialog box that said there was a problem with the APS Daemon.exe. Having read a few threads about the problem, I uninstalled ITunes and tried downloading the new version. Now, I'm getting a message saying: Service Apple Mobile Device (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.
I'm the only ITunes user on my laptop. I have no idea how to verify this. I've tried a few suggestions from other discussion threads, but none of them work. Beyond frustrating.
Any solutions? Thanks.Work through the discussion in the user tip: https://discussions.apple.com/docs/DOC-6562 and see if that helps.
-
I recently purchased an Iphone 3gs, and already have an itunes account...Itunes wont recognize my iphone...I have uninstalled and installed itunes 2 times and keep getting this error message.
Service ‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.
How do I correct?I had the same problem but managed to fix it with Amy ; the apple advisor. Here are the steps!
First of all, make sure you have the latest version of iTunes installed. You can download it from here. These instructions will NOT work for iTunes 8, 9 or 10 anymore. If you’re unsure, just uninstall iTunes then re-install with the latest files.
Next, you need to manually copy the Mobile Device Support directory from a working machine to your Windows 7 computer. Luckily, I have conveniently provided these files for you. You can download them here:
64-Bit iTunes 11.0.2: Please click here to download this directory for 64-bit Windows.
32-Bit iTunes 11.0.2: Please click here to download this directory for 32-bit Windows.
Once you download that file, you need to Unzip it to this directory. IMPORTANT: Make sure you unzip the CONTENTS of the zip file, don’t just copy over the zip file:
32-Bit: Unzip to C:\Program Files\Common Files\Apple
64-Bit: Unzip to C:\Program Files (x86)\Common Files\Apple
There are a large number of files in that directory, so it may take a little time, please be patient.
So, after unzipping, you should have a new folder “Mobile Device Support” in the Apple folder
64-BIT ONLY STEP: If you have 32-bit Windows, skip this step. It seems that Apple has put the “Drivers” in a separate location (don’t know why). You will need to download the drivers separately. Please click here to download the files for 64-bit Windows.
Once downloaded, you need to Unzip it to this directory. IMPORTANT: Make sure you unzip the CONTENTS of the zip file, don’t just copy over the zip file:
Unzip to: C:\Program FIles\Common Files\Apple
So, after unzipping, you should have a new folder “Mobile Device Support” in the Apple folder
Next, we have to merge the registry entries that will install the Apple Mobile Device service.
First, download the registry entries that I have provided for you here:
64-bit iTunes 11.0.2: Click here to download the registry entries for 64-bit Windows.
32-bit iTunes 11.0.2: Click here to download the registry entries for 32-bit Windows.
After you download the registry entries ZIP file, unzip it to your desktop and double-click each to install it. Say “Yes” to any prompts or confirmations about adding it to the registry. There are 2 entries, make sure you click BOTH and add BOTH to the registry.
Now, we need to install the correct driver for your iPhone / iTouch. Windows 7 incorrectly identifies the device as a digital camera. To fix this:
- Plug in your iPhone / iTouch (don’t have iTunes loaded at this time)
- Go to Device Manager (Click Start, right-click Computer, then click Properties. In the window that appears choose “Device Manager” on the left)
- Scroll down and find “Apple iPod” or “Apple iPhone” or “Apple iTouch”. It will likely be under the “Portable Devices” category.IMPORTANT NOTE: If your device is already listed under “Universal serial Bus Controllers” and not Portable Devices, you can skip these steps and go to Step 7.
- Right-click the Apple device and choose “Update Driver Software…”
- Choose “Browse my computer for driver software” in the window that appears
- It will ask you for a location; you want to Browse to this folder (location is the same in 32 and 64 bit Windows):
32-bit and 64-bit: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
- Click Next
- It should find the driver for your device; let it install that driver
Once you complete these steps, reboot your computer. Once you reboot everything should work exactly as expected! -
Unable to install iTunes 11.1.4.62 on windows 8. I get
Service "Apple mobile Device) failed to start.
Verify that you have sufficient privileges to start system services.
I am trying to install it on my desktop. I am also in Administrator mode. My iTunes stopped working when I was notified that there was a new version of iTunes and would I like to download it. I said yes as always and it was unable to finish the update because of a
runtime Error!
Program: C:\program Files (x86)\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contace the application's suport team for more information.
My iTunes stopped working at this time. I thought I could delete iTunes and start over. This tactic did not work.
Can anyone make sense of what I am saying and help me to get my iTunes back again?Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
While downloading the newest iTunes update I received several errors. The latest one being this: "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." These are the steps that I have already taken: un install iTunes (several times), reinstall iTunes (several times), move the .dil files to my desktop (although I have no idea what to do with them now)... I am still getting the same error while trying to download 1. the service error and 2. iTunes failing to open because it isn't properly installed. Can some one PLEASE be so kind as to help me with VERY simple step by step directions. I'm usually more computer savvy than the average user, but I'm feeling computer illiterate at the moment. I've been trying to work though this for 2 days now... sigh. Thank you in advance!
I found the answer to my question here: https://discussions.apple.com/thread/5572755?tstart=0
Maybe you are looking for
-
How do I change to make another thing like my contacts or voice dialing or vibrate mode Solved! Go to Solution.
-
Select records across multiple pages
i have a resultset of 100 records. 10 records are displayed and pagination is displayed for the users to navigate to other pages. All this is accomplished using jstl. if the user selects 2 records on page 1, navigates to page 2 and selects 2 more rec
-
I run a small business and am migrating from Entourage to Mail. I know Mail has native archiving feature. What is the best way for me and my employees to use archive. I need to keep my Exchange email boxes below 2GBs. Any ideas on best process? Thank
-
How attach jpeg or tiff to signature?
I put images in my sig but they don't pass to others.
-
Does app management in itunes 9 require os 3?
I've seen posts about problems with the app management feature and I am wondering if it is a bug in itunes 9 or if you have to have os 3.0 installed in your ipod touch to use this feature?