Verilog code in ISE 14.2 can be integrated with LABVIEW 2013?

i just want to ask if it is possible to integrate the verilog code with the VI in labview? will it work properly?

Yes it is possible to integrate Verilog code with LabVIEW 2013. The following KnowledgeBase article is currently being updated to reference LabVIEW 2013:
http://digital.ni.com/public.nsf/allkb/7269557B205B1E1A86257640000910D3?OpenDocument
I have used ISE 14.4 with LabVIEW 2013 without any issues. Hope this helps!
Daniel K | NI Applications Engineer | Certified LabVIEW Developer

Similar Messages

  • How can i do with labview program,when i have 20 different values,and 1 want to add it with constant value.and how to get the results?

    how can i do with labview program,when i have   20 different values,and 1 want to add it with constant value.and how to get the results?

    Why do the 20 values have to be different? The same code should work even if some are equal.
    What do you mean by "get the result"? The result is available at the output terminal and all you need is a wire to get it where you need it. That could be an indicator, another operation, or even a hardware device.
    What is the data type of the 20 values? An array? A cluster? A bunch of scalars? A waveform? Dynamic data?
    LabVIEW Champion . Do more with less code and in less time .

  • Can Peoplesoft HCM 9.2 can be integrated with Oracle HR Analytics?

    Hi All,
    Please help me understand if Peoplesoft HCM 9.2 can be integrated with Oracle HR Analytics? If so what is the latest Version  for that.
    What is the road map for that.
    Thanks in Advance
    J Smith

    Normally, Oracle will lag behind in certifying the latest PSoft releases...however, we are using OBIA 7964 with PSoft FSCM 9.2 using the 9.1 SDE adaptors.  It seems to work fine.  In general, its best to ensure the version is certified but you can ask Oracle support if the 9.1 adaptor can be used for 9.2 HCM.  If there are not significant structural changes for the tables in PSoft, it may work.  As for the dates for certification, Oracle would have to assist with that.  We have asked about FSCM 9.2 4 months ago and it is still not certfied.
    Pls mark correct...

  • Outlook 2013 can't communicate with Exchange 2013

    we're just finishing migration to Exchange 2013 and found some Outlook 2013 clients (migrated from Exchange 2010) can't communicate with Exchange 2013. even if i recreate the Outlook profile.
    what worked is to reinstall Office 2013.  just want to get ideas why a reinstall fixed the problem.
    same outlook proxy is there in the account settings.

    Hi,
    What was the symptom that Outlook couldn't communicate with Exchange 2013? Could you please detail this a bit?
    If the Account Settings are completely same before and after the reinstallation, we can say the cause is not on the Exchange side. While I can't guarantee the root cause based
    on the provided information. A reinstallation fixes the corrupted or missing components/files in Office, but it's hard to say what has been fixed during the reinstallation.
    If you still have some Office 2013 clients that have not been reinstalled, try to run Microsoft Office Configuration Analyzer Tool to quickly identify problematic configurations in Outlook:
    https://www.microsoft.com/en-us/download/details.aspx?id=36852
    Regards,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here.

  • Can Exchange 2007 to be integrated with SharePoint 2013

    Can Exchange 2007 to be integrated with SharePoint 2013?

    In the sense of using Incoming and Outgoing email, absolutely. But not for other things, like Site Mailboxes, which require Exchange 2013.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • ISE 3315 License needed for integration with PxGrid SealthWatch

    Hello Experts,
    i have ISE 3315 with Version 1.3
    i want to integrate it with pxgrid and ordering Sealthwatch. Can anyone tell me do i need To have ISE Advance-License for this integration ? Or with ISE  Base-License it can work?
    Thanks

    ISE License Packages
    Perpetual/Subscription (Terms Available)
    ISE Functionality Covered
    Notes
    Base
    Perpetual
    Basic network access: AAA, IEEE-802.1X
    Guest management
    Link encryption (MACSec)
    TrustSec
    ISE Application Programming Interfaces
    Plus
    Subscription (1, 3, or 5 years)
    Bring Your Own Device (BYOD) with built-in Certificate Authority Services
    Profiling and Feed Services
    Endpoint Protection Service (EPS)
    Cisco pxGrid
    Does not include Base services; a Base license is required to install the Plus license.
    Apex
    Subscription (1, 3, or 5 years)
    Third Party Mobile Device Management (MDM)
    Posture Compliance
    Does not include Base or Plus services; a Base license is required to install the Apex license.
    Note   
    When you use Cisco AnyConnect as unified posture agent across wired, wireless, and VPN deployments, you need Cisco AnyConnect Apex user licenses in addition to Cisco ISE Apex licenses.
    Mobility
    Subscription (1, 3, or 5 years)
    Combination of Base, Plus, and Apex for wireless and VPN endpoints
    Cannot coexist on a Cisco Administration node with Base, Plus, and/or Apex Licenses.
    Mobility Upgrade
    Subscription (1, 3, or 5 years)
    Provides wired support to Mobility license
    You can only install a Mobility Upgrade License on top of an existing Mobility license.
    Evaluation
    Temporary (90 days)
    Full Cisco ISE functionality is provided for 100 endpoints.
    All Cisco ISE appliances are supplied with an Evaluation license.

  • Can't Connect with Access 2013

    Hi, there!
    Am reworking a successful Access 2003 VBA project into Access 2013 VBA, which I am brand new to.  I have encountered a problem with Access 2013 when attempting to connect to a table in order to create a recordset.  The Access 2003 connection
    string does not work in Access 2013. To confirm this, I dug out an old Access 2003 VBA beginner's manual and typed a sample program directly from the textbook.  The sample code fails to successfully open a connection in Access
    2013 but, when I then copy and paste the program into Access 2003, it works fine.
    Online documentation useful for rudimentary programming activities being as scant as ever, am deeply appreciative of any real-time help rendered.
    Thanks,
    Mike

    Thanks for responding, Bruce.
    The table I'm connecting to is local to the current database project.  It's all standalone.  In other words, I launch Access 2013, I create a table, then I connect to the table. Really pretty straightforward stuff.
    Here's the code template I use to do it in Access 2003:
    Dim cnMyConnection As ADODB.Connection    
    Dim rsMyRecordset As ADODB.Recordset       
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Set cnMyConnection = CurrentProject.AccessConnection
    Set rsMyRecordset = New ADODB.Recordset
        With rsMyRecordset
            .ActiveConnection = cnMyConnection
            .CursorType = adOpenForwardOnly
            .LockType = adLockReadOnly
            .CursorLocation = adUseClient
            .Open "tblMyTable"
        End With
    etc.
    This works in Access 2003.  The recordset is created and then things can move forward.  But Access 2013 has all kinds of problems with it, beginning with improper use of the keyword "New."  It seems to demand a whole new syntax.
    Thanks for any insight you can provide, Bruce!
    -- Mike

  • Outlook can't connect with Exchange 2013 after migration from Exchange 2007

    <style type="text/css">P { margin-bottom: 0.21cm; }</style>
    Hello,
    recently we've done a Exchange 2007 sp3 to 2013 sp1. Users can conect perfectly with OWA and with his iphone clients.
    But the problem is they can't connect from his Outlook clients (2010, 2013), both internaly and externaly. Always fails with the message: The Connection to Exchange it is not avaliable.... Can't resolve the name of Exchange server.
    To try to resolve it we've done:
    - Check Outlook anywhere configuration en EAC: it is configure with and external url mail.company.com and internal server.domain.local. The security is the default Negociation, but we've tried all.
    - Check the internal dns, there are records for mail.company.com and exchangeserverdomain.local pointing to the exchange local ip. Also there is a public zone company.com with the record mail.caompany.com pointing to the exchange local ip. Also we've made
    records autodiscover.company.com and autodiscover.domain.local pointing to the exchange local ip.
    - In the public dns from our domain there is the record A and MX pointing our public ip. There aren't any record Autodiscover but we think that the manial conection should work.
    Check certificates: we've made a new self-signed certificate including all this internal and external domains and for all services.
    - Check Outlook Anywhere block: we've cheked.
    Currently server state:
    - Old Exchange 07 server can't start, it was in very bad state and we achieved migrate the mailbox to the new server, after that we tried to uninstall, but it crashes with a public folder replication error. We got uninstall all the roles
    unless the mailbox. After a restart it can't start.
    -The new Exchange 2013 looks great, there isn't any trail of the old server, or we haven't seen anything in the EAC or shell.
    I paste below the result of Microsoft Remote conectivity analaizer, with Outlook anywhere test. It is clear that there is a problem with that.
    Sorry because the test is in spanish and I translated it with google, from here I only can access the tool in spanish.
    We continue to try to resolve the problem.
    Thanks to all in advance!
    Testing RPC / HTTP connectivity.
    Error in testing RPC / HTTP.
    additional Details
    Elapsed time: 24295 ms.
    Test steps
    Connectivity Analyzer Microsoft is trying to test Autodiscover for [email protected] .
    Error in automatic detection test .
    additional Details
    Elapsed time: 24294 ms.
    Test steps
    Attempting each method of contacting the Autodiscover service .
    Failed to properly contact the Autodiscover service using all methods.
    additional Details
    Elapsed time: 24294 ms.
    Test steps
    Trying to prove possible Autodiscover URL https://empresa.com/AutoDiscover/AutoDiscover.xml
    Error in testing this potential Autodiscover URL .
    additional Details
    Elapsed time: 1509 ms.
    Test steps
    Attempting to resolve the host name in DNS empresa.com .
    The host name is resolved correctly .
    additional Details
    IP addresses returned : 80.36.252.194
    Elapsed time: 507 ms.
    Testing TCP port 443 on the host to ensure empresa.com listening or is open.
    The port was opened successfully.
    additional Details
    Elapsed time: 464 ms.
    Testing the SSL certificate to make sure it is valid.
    The SSL certificate is not exceeded one or more certificate validation checks .
    additional Details
    Elapsed time: 537 ms.
    Test steps
    Connectivity Analyzer Microsoft is attempting to obtain the SSL certificate from remote server on port 443 empresa.com .
    Connectivity Analyzer Microsoft successfully obtained the remote SSL certificate.
    additional Details
    Remote Certificate Subject : CN = mail.empresa.com , issuer : CN = mail.empresa.com .
    Elapsed time: 454 ms.
    Validating the certificate name .
    The certificate name was validated successfully .
    additional Details
    Hostname empresa.com was found at the entrance of the alternative subject name of the certificate.
    Elapsed time: 1 ms.
    Is validating the trusted certificate .
    Validation Error trusted certificate.
    Test steps
    Connectivity Analyzer Microsoft is trying to build certificate chains for certificate CN = ​​mail.empresa.com .
    Could not build a certificate chain for the certificate.
    Tell me more about this issue and how to resolve
    additional Details
    The certificate chain did not end in a trusted root . Root = CN = mail.empresa.com
    Elapsed time: 31 ms.
    Trying to prove possible Autodiscover URL https://autodiscover.empresa.com/AutoDiscover/AutoDiscover.xml
    Error in testing this potential Autodiscover URL .
    additional Details
    Elapsed time: 21723 ms.
    Test steps
    Attempting to resolve the host name in DNS autodiscover.empresa.com .
    The host name is resolved correctly .
    additional Details
    IP addresses returned : 46.16.56.40
    Elapsed time: 498 ms.
    Testing TCP port 443 on the host to ensure autodiscover.empresa.com listening or is open.
    The specified port is blocked , not listening or does not generate the expected response .
    Tell me more about this issue and how to resolve
    additional Details
    Network Error communicating with the remote host.
    Elapsed time: 21224 ms.
    Attempting to contact the Autodiscover service with the HTTP redirect method .
    Error when trying to contact the Autodiscover HTTP redirect method .
    additional Details
    Elapsed time: 606 ms.
    Test steps
    Attempting to resolve the host name in DNS autodiscover.empresa.com .
    The host name is resolved correctly .
    additional Details
    IP addresses returned : 46.16.56.40
    Elapsed time: 14 ms .
    Testing TCP port 80 on the host to ensure autodiscover.empresa.com listening or is open.
    The port was opened successfully.
    additional Details
    Elapsed time: 202 ms.
    Connectivity Analyzer Microsoft is checking the automatic detection of host empresa.com for an HTTP redirect to the Autodiscover service.
    Connectivity Analyzer Microsoft could not get a HTTP redirect response for Autodiscover .
    additional Details
    Web exception occurred because an HTTP 404 response was received - Unknown NotFound . Headers received: Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27:58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 +
    lenny3 with Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3 HTTP Response Headers : Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27: 58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 + lenny3 with
    Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3
    Elapsed time: 388 ms.
    Attempting to contact the Autodiscover service using the method of DNS SRV redirect server.
    Connectivity Analyzer Microsoft could not contact the Autodiscover service using the DNS SRV redirect method .
    additional Details
    Elapsed time: 186 ms.
    Test steps
    Trying to find the SRV record in DNS _autodiscover._tcp.empresa.com .
    Not the Autodiscover SRV record in DNS found .
    Tell me more about this issue and how to resolve
    additional Details
    Elapsed time: 186 ms.
    Checking for a CNAME record for Autodiscover in DNS for your domain " empresa.com " to Office 365.
    Could not validate the Autodiscover CNAME record in DNS. If your mailbox is not in Office 365 , you can ignore this warning.
    Tell me more about this issue and how to resolve
    additional Details
    No Autodiscover CNAME record for your domain ' empresa.com ' .
    Elapsed time: 268 ms.
    jspt

    Hello,
    We have the Self-signed certificate that comes with Exchange, and we've created a new self-signed including all our domains mail.company.com, domain.local, exchange13.domain.local, autodiscover.company.com, autodiscover.domain.local.
    below I print you the result os the comand Get-ClientAccesServer | fl . Now we've configured a SPC objetct folow the instructions of Wizard
    Exchange Server Deployment from Microsoft. We've executed the commands in our new Exchange 13, but can't did it in the old Exchange:
    $AutodiscoverHostName = "autodiscover.contoso.com"Get-ExchangeServer | Where {($_.AdminDisplayVersion -Like "Version 8*") -And ($_.ServerRole -Like "*ClientAccess*")} | Set-ClientAccessServer -AutoDiscoverServiceInternalUri https://$AutodiscoverHostName/Autodiscover/Autodiscover.xmlThis is the result of
    RunspaceId                           : 89c86f8e-d156-4480-b31d-59215976879b
    Name                                 : EXCHANGE13
    Fqdn                                 : EXCHANGE13.domain.local
    ClientAccessArray                    :
    OutlookAnywhereEnabled               : True
    AutoDiscoverServiceCN                : EXCHANGE13
    AutoDiscoverServiceClassName         : ms-Exchange-AutoDiscover-Service
    AutoDiscoverServiceInternalUri       : https://autodiscover.company.com/Autodiscover/Autodiscover.xml
    AutoDiscoverServiceGuid              : 77378f46-2c66-4aa9-a6a6-3e7a48b19596
    AutoDiscoverSiteScope                : {Nombre-predeterminado-primer-sitio}
    AlternateServiceAccountConfiguration :
    IsOutOfService                       : False
    WorkloadManagementPolicy             : DefaultWorkloadManagementPolicy_15.0.825.0
    Identity                             : EXCHANGE13
    IsValid                              : True
    ExchangeVersion                      : 0.1 (8.0.535.0)
    DistinguishedName                    : CN=EXCHANGE13,CN=Servers,CN=Exchange Administrative Group
                                           (FYDIBOHF23SPDLT),CN=Administrative
    Groups,CN=First Organization,CN=Microsoft
                                           Exchange,CN=Services,CN=Configuration,DC=domain,DC=local
    Guid                                 : e83055fe-217b-4ed6-9cd0-7711097baf99
    ObjectCategory                       : domain.local/Configuration/Schema/ms-Exch-Exchange-Server
    ObjectClass                          : {top, server, msExchExchangeServer}
    WhenChanged                          : 09/03/2014 12:46:07
    WhenCreated                          : 08/03/2014 19:15:54
    WhenChangedUTC                       : 09/03/2014 11:46:07
    WhenCreatedUTC                       : 08/03/2014 18:15:54
    OrganizationId                       :
    OriginatingServer                    : severdc.domain.local
    ObjectState                          : Unchanged
    I hope this stuff can help you.
    Thanks!!
    jspt

  • How can I build a LabView application that uses the 2012 runtime, on a development system with LabView 2013 or 2014 installed?

    I need to build a LabView application .exe to run with the 2012 Runtime, for legacy support. I currently have LabView 2013 installed on my development system, and have 2014 available. How can I build an application that uses the 2012 runtime on this development system? Do I have to downgrade to 2012? Thank you.

    We have existing customers that have installed our application that was originally built with 2012 (provided by a contractor that is no longer available).  Due to IT regulations, it is far easier to update these customers by simply replacing the .exe file, than creating an install that their IT department must run.
    If I have to downgrade to LabView 2012, where can I get the installation for this?

  • Are there any PCIE CAN Cards Compatible with Labview RT?

    Hi,
    I am looking for a mini PCIE CAN card or PCIE 1X CAN card that will run under Labview RT.  Are any of you using a PCIEC AN card with Labview RT?
    Thanks,
    Phillip

    Hello Phillip,
    I do not believe that we have any PCIe CAN cards. Here is a link to the PCI CAN cards that will work on LabVIEW Real Time(http://sine.ni.com/np/app/main/p/bot/no/ap/icomm/lang/en/pg/1/sn/n24CI,n21:17,n17:icomm,n19:Real%20T...). Please let me know if you have anymore questions. Have a great day!
    Best Regards,
    Adam G 
    National Instruments
    Applications Engineer

  • Can i communicate with labview, using ethernet or seriel modbus.

    Is it possible to communicate with a i/o module and labview. I can communicate with ethernet, canbus(cscan, devicenet), rs232(modbus).
    What is the easiest solusion.
    Is it necessary to buy PC-cards for the communication or have only to download some drivers.
    Thx

    Hello,
    To communicate with a CAN/DeviceNET bus you will need an interface card in your PC. NI has such cards along with LabVIEW VIs:
    http://sine.ni.com/apps/we/nioc.vp?cid=1329〈=US
    http://sine.ni.com/apps/we/nioc.vp?cid=1311〈=US
    To communicate with Modbus, you will NOT need any special cards but you do need software drivers for it (you'll obviously need an Ethernet card for TCP/IP and Serial port for RS232). There are several options for these drivers, however:
    1. Write your own driver VIs. You'll basically implement the Modbus protocol in LabVIEW. Modbus is a simple and open protocol.
    2. Try to search the Net for such existing VIs. I believe someone has already written such Modbus VIs.
    3. Use the Industrial Automatio
    n OPC Servers suite from NI:
    http://sine.ni.com/apps/we/nioc.vp?cid=4584〈=US
    4. Use any third-party OPC Server for Modbus.
    NOTE: in case you opt 3 or 4 above: though you may use DataSocket in LabVIEW as an OPC Client, you may want to consider LabVIEW-DSC which has a built-in OPC Client, and hence better support for OPC.
    Hope this gives you some options.
    Regards,
    Khalid

  • How can capture audio with labview

        I desired to make a audio equalizer vi using lab view. Audio will be taken from microphone. How can I capture sound from microphone with labview?

    See the example "Sound Card AutoPower Spectrum" This allows you to sample from an input device through your sound card, and take a spectrum.  you should be able to bin the spectrum by frequency bands, and show the histogram of frequencies.  You probably can even selectively resample and scale the frequencies, mix the signal and output the new sounds but I hav not tried this (I am not an audiophile so this is beyond my scope of expertise)  Good luck  ,
    Paul
    Paul Falkenstein
    Coleman Technologies Inc.
    CLA, CPI, AIA-Vision
    Labview 4.0- 2013, RT, Vision, FPGA

  • I purchased Adobe Photoshop Elements 12, the reception code is invalid, so I can't install with serial code

    Having difficulty reaching support for my purchased Adobe Photoshop Elements 12. The Redemption code says invalid. It's typed accurately. So I can't get a serial number to complete installation. Adobe doesn't offer phone number for support. I'm stuck and frustrated.

    Photoelementsrookie I am sorry you have faced a difficult experience redeeming your redemption code.  Please see Redemption Code Help for information on how to redeem your redemption code. 

  • Does the FPM can be integrated with smart business?

    Hi,colleagues
    There is a system solution like this:
    The data maintain and calculation is done in FPM applications (SAP ECC), while the data analysis is displayed in Smart Business (SAP HANA).
    So comes to the question: In the FPM applications, does the smart business can be presented for end-users? otherwise end-users have to open the smart business in launchpad.
    Thanks a lot in advance!
    Best regards,
    Daniel

    There are few third party Addons for "Project Management" for SAP B1.
    There is an Addon called 'ICON' from Xenolith Technologies, Calcutta, India.
    [http://www.xenolithtechnologies.com/icon.html]
    This addon allows integration between B1 and MS Projects

  • I have a digital storage oscillosco​pe tektronix 2430,and an old style GPIB card (8 bit, ISA). How can I work with labVIEW?

    My GPIB card is NI one, but it is 8 bit-ISA. I have LabVIEW (4.,5.1 and 6i version). I want to work with my digital storage oscilloscope Tektronix 2430. I need your experiences.

    Hi there,
    My suggestion is start try with "MAX" to communicate with your scope,
    Download the driver for the scope from NI.com. And from there you can get started.
    Good Luck and if you need any help, just post in this forum.
    When you feel sad, laugh

Maybe you are looking for

  • Is there a service to list invoice types and all invoices for a customer?

    Hi gurus! The header/subject speakes for it self: is there a service method that lists all available invoice types? The customer uses ecc with ehp3 and I have only found a service for getting an invoice for an invoice Id. But I also want to list all

  • Webgate7.0.4, OBIEE, Apache 2.0.52, Weblogic10 on Windows

    Integration of OBIEE, Apache 2.0.52, Weblogic10, Webgate 7.0.4 on Windows I installed the following for this integration. 1. OBIEE (10.1.3.4.x) Installed on JAVA OC4J Container (but deployed to Weblogic) 2. Installed Weblogic 10 SSL enable (infrastru

  • Rename a layer

    I can rename a layer? When I doble-click a layer name, I can write other name but when I press <enter> the layer revert to original name

  • Error message when attempting to download library ebooks

    I have encountered a problem downloading ebooks recently. I get an error message E_AUTH_BAD_DEVICE_KEY_OR_PKCS12. I am able to open the books and read them on my PC but can't download them and move them into my Nook.

  • TS1436 error 4310

    iTunes Error 4310: How do I fix this? I can't burn music to a disc, it cancels the burning process automatically. Then gives me error code 4310.