Verison 7 not correctly displaying some columns/windows

NING is one of the larger providers of social networking sites around...since upgrading to version 7 some columns and windows do not display correctly (some text is not shown). I have a photo of the behavior but cannot find a way to post to help to demonstrate the issue. As an administrator for a site on NING, I cannot give you a URL as it is a password protected are of the site. However attached is a link to a discussion about the behavior from NING's Creator site

The correct source of assistance with this situation is directly from
http://www.samsontech.com/samson/products/microphones/usb-microphones/gtrack/ as they are the manufacturer of the hardware and have sole responsibility for support of their product. This is not a Microsoft product and Microsoft does not provide support
for third party hardware.
I especially recommend you download and read
Samson G Track FAQ's V2.0
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Similar Messages

Accounts Setting page at Facebook is not correctly displayed

Facebook accounts settings not correctly displayed. My OS is Windows XP & Internet security is Kaspersky

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

TS2570 startup itunes get runtime error R6034 and then not correctly installed ERROR 7 (windows error 1114).

startup itunes get runtime error R6034 and then not correctly installed ERROR 7 (windows error 1114).

ChrisJ4203 wrote:
Use this support document to remove iTunes and reinstall it on the computer. Follow the directions exactly. http://support.apple.com/kb/HT1923
Chris,
This absolutely solved the problem !!!!!!!!!!!!!!!!!!!!! I was having the exact same error messages as Mike.
Thank You for the great fix and I did not lose one song file!!!!!!!!!!!!
G

Overall results row - how not to show some columns

Dear Experts
I have set results rows enabled at a certain characteristic level.
So, at the rows level, the results row is showing.
But at the right-hand-side results columns, some of the keyfigure columns should not be displayed , for example, price should not be summed.
How can this be achieved using a query only?
regards
Pascal

HI,
As i dont have your report layout based on my assumptions i understand that you have put one char in rows column above the strucutre and thats why you are getting result in rows and column as well.
Now you need to hide the column result which indeed seems no to me i tried same on my system but i can only make the value and result blank but cannot hide the complete result column.
Please correct me if my understanding is worng or your requirement in something differnent.
Hope it helps.
Regards,
AL

How could I display some columns in a JTable?

Help, please:
I got a Table data(using AbstractedTableModel), and I can display all rows and columns. How can I just display several columns and all rows? Should I delete some columns from table and fireChanges or what? but I need these columns later. Make sense? any ideas?
Thanks for any helps.
Royan

this worked for me,
import java.util.*;
import java.io.*;
import java.net.URL;
import java.sql.*;
import javax.swing.table.*;
import javax.swing.*;
public class HideTableColumns
      public HideTableColumns()
      private void initialize()
      DefaultTableModel m = new DefaultTableModel();
      try {
         java.util.Vector data = new java.util.Vector();
         java.util.Vector headers = new java.util.Vector();
         String s = "";
         headers.addElement( "OrderID" );
         headers.addElement( "CustomerID" );
         java.util.Vector datum = null;
         datum = new java.util.Vector();
         s = "OrderID";
         datum.addElement( s );
         s = "CustomerID";
         datum.addElement( s );
         data.addElement( datum );
         m.setDataVector( data, headers );
         for( int r = 0; r < m.getRowCount(); r++ )
            for( int c = 0; c < m.getColumnCount(); c++ )
            s = ( m.getValueAt( r, c ) ).toString();
            System.out.println( s );
      } catch( Exception e ) {
         System.out.println(e.getMessage());
         e.printStackTrace();
      JFrame f = new JFrame();
      JPanel p = (JPanel) f.getContentPane();
      JTable tb = new JTable( m );
      TableColumn col = tb.getColumnModel().getColumn(1);
      col.setPreferredWidth(0);
      col.setMinWidth(0);
      col.setMaxWidth(0);
      p.add( tb );
      f.pack();
      f.show();
      public static void main( String[] args )
      HideTableColumns d1 = new HideTableColumns();
      d1.initialize();
}

UTF8 characters not correctly displayed whilst having encoding set to UTF8

Although the Encoding in Tools > Preferences > Environment is set to UTF8, SQL Developer is not able to display the UTF characters correctly.
I know for sure that I have tested this before using an older version of SQL Developer and then then this worked OK.
Can somebody tell me if I need to change anything else within SQL Developer to make sure the UTF8 characters like (Ὦ φῶς τελευταν σε προσλέψαιμ) are displayed correctly?
Our database (both SQL Server and Oracle) are both completely Unicode aware.
I'm using version 1.1.2.25 build MAIN-25.79.

Hello Barry,
'Where are you seeing this'
Well we are seeing this in the most used tab display on a table. So for instance our database is called PV50. Then from the connections window I double click on PV50 > Tables > <table_name> (in my example QUEUE_MESSAGE).
Then the table is opened. Then I goto the 'DATA' tab of this table and look at the column in which the UTF8 characters are stored. In there I see the wrong display at the moment. I hope this helps to sort out the problem.
If not please let me know.

Firefox 3.6.8 does not correctly display inuktitut text in an input field. Any solution?

Firefox 3.6.8 seems to have an issue with Unicode in input fields, e.g.
The following code
<input type="text" value="ᕿᓂᕐᓂᖅ..." style="font-family:Pigiarniq">
should look more or less the same as
<input type="text" value="ei3i6..." style="font-family:AiPaiNunavik">
The first one uses a Unicode font (available at http://www.gov.nu.ca/english/font/) the second one one of the traditional non-unicode fonts.
The two squares in the first string are not really squares. When you copy and paste the string onto a system with a unicode font containing canadian syllabic characters, then the squares are displayed correctly.
Additional information: I just found that this is not related to input fields, as I thought in the beginning, but also happens within normal Ps or DIVs.
Strangely enough, the following complete HTML seems to work when saving as a local file:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="iu-ca" lang="iu-ca">
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
<style>body{font-family:Arial,Pigiarniq;}</style>
</head>
<body>
<p>ᕿᓂᕐᓂᖅ</p>
<div>ᕿᓂᕐᓂᖅ</div>
<p>a real unicode font:</p>
<input type="text" value="ᕿᓂᕐᓂᖅ..." style="font-family:Pigiarniq">
<p>a non-unicode font:</p>
<input type="text" value="ei3i6..." style="font-family:AiPaiNunavik">
</body>
</html>
and opend within this same browser session in another tab.
In my current browser session, I see two different renditions of the string:
- on this support form submission page, the string is incorrectly displayed (with two squares) as on the webpage which is currently under development
- in another tab, the above mentioned HTML file displays all instances of the string correctly.

(A) is what I see on this webpage (Firefox support form submission page)
(B) is what I see within the same browser instance in another tab, viewing the above HMTL code
(C) is what happens on the webpage under development.
A and C show the same strange behaviour.
Opera, Safari on Windows and IE display it correctly.
Thanks for any hints,

Data Integrator: Arabic characters are not correctly displayed

Hi,
I'm trying to load Arabic text via an UTF8 flat file into an Oracle database.
I've read several topics and set the correct code page settings (also during install) for the datastore and flat file.
Already in flat file preview (see attached screenshot), the wrong characters are displayed. The characters as they are displayed, are inserted in the database. So I think that if I get the flat file preview correctly, the text is inserted correctly into the database.
On the other hand: When i copy the contents of the flat file, via a bodi job, to another flat file, the target flat file does contain the correct characters (when opened in a utf8 file reader).
I tried several solutions and also went through the Code Page help topic on the BODI site.
Does anyone know a solution to my problem or know this is a BODI bug or something?
I'm using Designer version 11.5.3.9 (I went through fix notes of versions after 11.5.3.9, but saw nothing mentioned about my problem). The Oracle database does support arabic characters as I can insert them via e.g. SQL Developer.
Thanks a lot in advance!
Picture of the flat file settings and data preview:
[flat file settings and data preview|http://img169.imageshack.us/my.php?image=arabcharyx3.jpg]
Edited by: Willem van Opzeeland on Jul 23, 2008 2:13 PM: added info

Hé Amr, thanks a lot! This sounds good.
I indeed saw a kind of this solution somewhere else. What I did not is restarting the computer, since it is a shared server. Maybe that was why it didn't solve my problem.
Before I restart an additional question: I need to convert some files with Turkish characters as well.
Have you got a value which I can put in NLS_LANG, which supports these characters and Arabic characters both at the same time?

Colors not correct in some browsers.

Why does my text not render the correct color in some versions of IE? Is there a fix? The white turns blue and the yellow turns black. Here's one of the pages but its the same across the site. The text does have a drop shadow on it which I considered as a potential cause of the problem. Any thoughts? http://www.rwhuntley.com/research.html

RW Huntley wrote:
Without the "height" how do we plan for the footer to be at the bottom
of the page? If the content_wrapper "height" is defined by the content,
I would have to plan exactly the correct content to push the footer down
to exactly the correct height to end up at the bottom of the tablet
screen. What am I not understanding?
That is not a good plan.
Designing websites for one specific size is a good way to have a broken site appear on everything else.
Setting the height of a text container is asking for trouble, as my screenshot shows, because the font size on my screen is slightly larger than what you test in, your page breaks and becomes almost unreadable at the end. Worse yet, it looks broken to your viewers. "Broken" sites don't get much for return visitors.
Basically, what's happening is your font looks smaller on your tablet than it does on my PC (whether that's an OS, browser rendering engine or user setting is beside the point), so you set the heights to a pixel size that fits, on your tablet. Let me rephrase that: "on your one specific make, model, OS, screensize and resolution tablet".
Everything looks OK to you, but when someone else comes to your page and has a font size setting that is different from your tablet's, the text will overflow the pixel size of the container and break your design.
Doing what I suggest above will keep that from happening, but it won't let you keep the footer in the exact location you want.
To do that, you could try position:fixed along with bottom:0px; in the footer container's css. You'd then need to play around with the end of your text area to give it enough "white space" at the bottom so the footer doesn't overlap the text, but it could be done. That way, no matter what device/browser views your site, the footer bar would be on the bottom of the window at all times.

Please help - french accents not correctly displaying/storing in database

Hello -
I have 2 databases running in 2 different character sets.
I am able to insert the following french accents in both databases and stored correctly also in db and displayed correctly in sql plus -
à À Ä ä Â â é É È è Ë ë Ê ê î Î ï Ï ç Ç Û û ô æ ö « »
But the following 2 charactes donot get displayed/stored correctly in any of the databases -
1. For db running in UTF8 character set it stores/displays as follows -
2. For db running in WE8ISO8859P1 character set it displays as 2 filled black squares. But when I do 'copy and paste'. It is pasteing correctly in the editor as follows -
I have another one database running in same WE8ISO8859P1 character set , DBA out there sent me the results from sql plus for the above 2 characters and they are getting displayed as well as stored fine.
I have the following questions -
1. Besides database characterset what else parameters or environment variables I need to check the for these characters to be displayed/stored correctly ?
2. Why would Databases with same characterset gives different results for the same characters ?
3. UTF8 is superset of WE8ISO8859P1 characterset, then why in that UTF8 db is unable to store that characters
which were able to be stored in WE8ISO8859P1 db.
By these various results, I am very confused and not able to troubleshoot further.
Any help would be very much appreciated...
Thanks
Rama

Ah... an interesting NLS problem ;)
Main problem or misunderstanding could be that the characters small and capital ligature OE ( ) is not part of the ISO 8859-1 repertoaire. That is, you need another characterset to store and use those characters properly.
However, and sometimes unfortunate, if both db and session is using the same characterset setting, the binary value is "passed through" without conversion and stored - even if actual char is not valid!
1. DB charset should be able to store all possible chars your apps/users need. That's a first. Is that the case?
For sessions, the OS/app charset used should be indicated to Oracle with NLS_LANG parameter (registry or env var).
2. Are you sure that (valid) character codes are stored correctly. Note that storing values directly could work technically but be wrong semantically. Values > 127 are not valid in UTF-8 (needing further explanation)!
3. How are "characters" stored? What does this tell you?
SQL> select dump(column,1016) from dual;
Regards,
Fredrik

3rd gen iPod nano is not correctly recognized on new Windows 7 iTunes

Moved my iTunes library from old PC to new Win7 PC via direct iTunes folder copy.
Looked ok
but when I connect my 3rd Gen Nanos, I get dire warnings that I have to authorize new PC with my son's AppleID not mine (was originally his iPod but long since factory reset and reloaded) or else iTunes will delete purchased songs. (The new PC is authorized for my Apple Id).
I have 2 of these iPods and the other one was never my son's so I don't know why it also thinks it needs his id.
When we check my son's account and look at devices, the iPods are not listed. (maybe only newer iOS devices are listed?) So I can't "remove" the iPods from that account via the iTunes Store account profile.
yes, I have tried reinstalling iTunes and wiping the registry - no luck. If I "cancel" when the dire warnings come up instead of authorizing using my son's account, then the iPod is not recognized at all by iTunes (does appear as external drive in Windows) and I have to reinstall .... again.
My questions are:
1) do the old iPods themselves some how store the original Apple ID they were associated with?
2) If so, how can I reset to use my Apple ID?
Will "factory reset" work?
What I don't want is to reset and then find out I can't reload using current iTunes library associated with current Apple ID
3) I don't think this will solve the problem but: in iTunes, can I separately sign in with both IDs and authorize the computer with both IDs? Can a single instance/install/library of iTunes use 2 different AppleIDs? (there are not 2 users on this PC - just 1. So just 1 iTunes instance, just 1 library)
More details:
I tried:
If I authorize the new PC for my son's account which the ipod and Itunes seems to want, then when the iPods are connected, all the song's listed in the library in main/right pane are greyed out and can't be selected. I don't recall this being a problem on the old PC so something seems wrong.
I am concerned that:
If I give up and authorize this PC for both Apple Id's, then what? If I buy something new from iTunes (using, can I sync it to the iPod?

Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok.

3D plot not correctly display

I opened the example VI, "3D Surface Plot.VI", but the 3D plot indicator on the front panel did not display correctly. What's wrong with this? Is this a bug of Labview, or related to my computer hardware? And how could I fix this problem?
Solved!
Go to Solution.

Hello Pound,
It would be extremely helpful if you could provide additional information on the version of LabVIEW and what OS you are using as well as what the computer hardware you noted might be an issue actually is. Have you tested this on other computers that don't show the problem?
Right now all we have to go on is that you're using a version of LabVIEW that includes the 3D surface plot.
That being said, this looks similar to the issue noted here:
Labview 2011 and 2011 SP1 known issues: 3D Picture Controls can display transparently
http://www.ni.com/white-paper/13164/en/#238713_by_Category
It appears that this is an issue with certain integrated graphics cards and one known solution is to update the drivers for said card. Additional information is provided in the link above.
Best Regards,
Tom L.

IWeb pages Do Not Correctly Display In W3C's Browser/Editor - Amaya 9.54

Earlier I posted that lastest version of Firefox would not display iWeb pages correctly. However, iWeb pages have never displayed correctly in the W3C's browser/editor Amaya. I just tried the Amaya upgrade (9.54) and the iWeb pages still don't display correctly NOR do any of my links work!? Everything displays correctly in Safari (and now Firefox?!)
Here's my iWeb page:
http://usablemakeover.com/publicopenspacedesign101/Blog/Blog.html
To download and check with Amaya:
http://www.w3.org/Amaya/

The issue isn't whether or not users use Amaya for web browsing - the issue is: does iWeb produce valid HTML and CSS!
Since Amaya is produced by the W3C - who establishes the standards for valid HTML and CSS (yes/no?) - anyone using iWeb to produce content - expects iWeb to produce valid pages. Or is there a problem with Amaya?
Here's how to check for valid HTML and CSS. Just paste my URL (or your own iWeb page URLs):
http://usablemakeover.com/publicopenspacedesign101/Blog/Blog.html
into: http://validator.w3.org/
and http://jigsaw.w3.org/css-validator/
You will likely be surprised with the results.
G4/500 Mac OS X (10.4.9)

Dictation not working in some program windows

I have an electronic medical record (EMR) that I use in my office on my Macs. I am running Mavericks. At first dictation worked inside a note inside the program, and then it stopped. It still works outside this specific program. I suspect that the EMR Vendor suspended the access that dictation had to its windows so that they could sell their own dictation program. Can they in-fact do that? Is there a way around it?

Maybe this will help. If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/19260713#19260713%2319260713%2319260713

Actual cost not correctly displayed for material consumed in an order

Hi All,
I have an issue which is as follows:
In a service order, I have consumed 13 materials for which I am able to view the list of goods movement with its amount and plant and storage location.
For each goods movement system has generated material document, accounting document, controlling document, etc.
However system is not displaying the actual costs of all the 13 materials consumed within the order. Only one material cost is dispalyed in actual cost of overview tab of COSTS tab.
Incidentally, when I clicked the "Rep. Plan/Act." button, system is displaying the actual costs of line item wise material consumption.
Kindly let me know what could be the reason for this error.
Many thanks in advance............ JK.

Kannan,
If the "Rep. Plan/Act." costs are correct, then you have problems with your value categories
Have a look at the following correction programs:
Run TCode OLI5 to correct value category errors (program RIPMCO00)
Run TCode OLPM to re-build structures (program RIPMS001)
PeteA

Verison 7 not correctly displaying some columns/windows

Similar Messages

Maybe you are looking for