VeriStand 2014 Tutorial Missing Info

The VeriStand 2014 tutorial says to add a custom indicator called "Helicopter(3dView)" which is a LabVIEW 3D picture control containing a 3D animation of the helicopter on which this tutorial is based. However, it doesn't tell you how to add a custom indicator or where to find this "Helicopter(3dView)" 3D picture control indicator.
I've looked around in the VeriStand workspace and I can't find anywhere that mentions custom controls or indicators. Also, I looked in the files on the disk for the aforementioned 3D helicopter indicator with no success.
EDIT: I opened the solution to phase I and it failed to load the 3D model and the numeric slider (which I also don't have).
Solved!
Go to Solution.

Hmm we tried a new process for releasing this and there appears to be some issues. My appologies. I'm working on a fix now.
Stephen B

Similar Messages

NI Veristand 2014 doesn't appear in MATLAB R2014a Code generation

Hi
I installed NI Veristand 2014 after installing MATLAB R2014a. I restarted my PC and tried to apply the sinewave example. I looked at code generation in Simulink model configuration parameters but couldn't find the NIVeristand option as illustrated in video. Here is a screenshot of system target file:
Did I miss installing something? That was my installation (since I need Veristand to compile MATLAB model):
Thanks for your assistance in advance
Waleed El-Badry MSc.,MCPD, ISTQB Certified Tester
Assistant Lecturer
Mechatronics Department
Faculty of Engineering
Misr University for Science & Technology
Solved!
Go to Solution.

Hi Waleed,
Unfortunately the behavior your are experiencing is a fault in our installer's auto-detection of MATLAB R2014a. The NI VeriStand 2014 node you see in the installer setup window is actually hiding several other unique options. The default selections should auto-select MATLAB support if MATLAB was successfully detected by our installer, unfortunately this procedure has failed.
To workaround this:
1. Relaunch the installer setup window
2. In the Features setup window (your second picture), left click on the image next to the NI VeriStand 2014 label
3. You should now be presented with the option, Install with customization - select this option.
4. Proceed with the installation, eventually you be presented with custom options for the VeriStand product.
5. In the VeriStand feature list, select the NI VeriStand 2014 Model Framework option
6. Proceed with the installation.
After this, restart MATLAB and then relaunch. If the installation was successful, on relaunch of the MATLAB COmmand Window will print the string Initializing NI VeriStnad 2014. Please note that we've documented this issue and are making an effort to address it.
Nestor

Language time-zone missing info

Hi,
This is probably a bug or at best smoe missing info in the language support.
If we set a non English locale the dates (name of day and month) are coming in the pecified language.
However the time zone list ignores the locale and returns a string only in English
for instance:
MIT, West Samoa Time
AST, Alaska Daylight Time
PST, Pacific Daylight Time
PNT, Mountain Standard Time
MST, Mountain Daylight Time
CST, Central Daylight Time
Since those strings are not translated I have sent those strings to Translation centers for translation. They asked me what are the abbreviations so they can be translated. There is nowere to find the info of what MIT stands for , AST stands, PST, MST and CST. I can try to infer it from the names but for this list I have no certitude of being correct.
How many of us translate URL be universal resource locator or uniform resource locator?
Any idea or help?
Thank you,
Adrian

Hi,
This is probably a bug or at best smoe missing info in
the language support.
If we set a non English locale the dates (name of day
and month) are coming in the pecified language.
However the time zone list ignores the locale and
returns a string only in English
for instance:
MIT, West Samoa Time
AST, Alaska Daylight Time
PST, Pacific Daylight Time
PNT, Mountain Standard Time
MST, Mountain Daylight Time
CST, Central Daylight Time
Since those strings are not translated I have sent
those strings to Translation centers for translation.
They asked me what are the abbreviations so they can
be translated. There is nowere to find the info of
what MIT stands for , AST stands, PST, MST and CST. I
can try to infer it from the names but for this list I
have no certitude of being correct. Don't translate the acronym, translate what the English description is. So the 'MIT' zone is translated by translating "West Samoa Time" to the target language.
How many of us translate URL be universal resource
locator or uniform resource locator?URL always and only stands for Uniform Resource Locator. "Universal Resource Locator" is a common mistake because it sounds so similar phonetically and conceptually.
(http://www.catb.org/~esr/jargon/html/U/URL.html)

Can I have iTunes find my missing info for my songs and albums that are already on my computer?

I have missing info on a lot of my songs and the albums I had put them on by CD awhile ago without internet and I cant redo them because I dont have the CDs anymore. Can I have iTunes find the info for them?

Google "TuneUp" it should be the first result. TuneUp is a paid application though, there's another application called MusicBraiz which is free, but this one is a little complicated I think. Hope that helps

Best way to insert missing info (in playlist or main library)

Hi, i am just new to the iTunes program. I have a lot of downloaded songs with missing info (ie. album etc). We are using two dif ipods and have set up two different playlists to separate the music.
My question is this: when i edit the missing info of a track, should i be doing it in the main library or in my playlist, or does it matter.
I am thinking that when i make changes in the main library then i may have to re-add it to my playlist...or if i enter the missing info from the playlist view that it won't make the changes in the main library and thus keep my files organized into the right folders.
Sorry for the ramble. Hope someone can help.

A playlist is simply a list of songs. It is not the songs themselves.
A playlist is simply a pointer to the song itself.
If you "edit" in the playlist, it open the songs file.

Download response as PDF form ....missing info

I have a form running that has captured and recorded the correct data...and shows up correctly in the response table however when I "downlaod the response as a PDF form" some data is missing and some is there.
Any ideas?
Thanks,
Derek

Hi Derek,
Were you having the same problem when exporting your responses data in different format like Excel or CSV? If if is possible, please share your form with me.
Please do the following to share your form
1. Click on “Design tab” on the top left corner.
2. Click on the “Share” icon on the bottom left corner.
3. Click on “Add Collaborator” on the popup menu.
4. Enter [email protected] under “People to share with”.
5. In the Message edit box, type "download response as PDF form ....missing info"
6. Click the “Share” button on the bottom right of the dialog.
Thanks
Ken

Dashcode "Missing Info.plist" agony.

hello all,
i'm having a real pain in the patoot trying to use dashcode under 10.5.6 leopard.
i launch dashcode to create a new countdown widget in Dashcode. i set all the widget attributes and mark that and the customize countdown options as done. i save. i then try and just run it, as is. each and every time i get the same error: "Cannot open widget: Missing Info.plist file." i check the "Files" view and yes, an Info.plist file is in there. also, it's properly named "Info.plist," capital "I," not lowercase "i" on "Info." (yes, i've seen those errors mentioned in these forums.
in addition, if i save everything, shut down dashcode, and re-open it, i then get a Canvas view screen with nothing but the blank, grey checkered canvas where the widget formerly was. and i haven't altered any files or changed a line of code.
i'm on a black macbook with an intel core2duo 2.16 Ghz process, 2 GB ram and mac os x 10.5.6 leopard with all the latest updates to the system applied, security updates and all else.
to make sure it wasn't my development install, i downloaded and installed the latest Xcode 3.1.2 package and iPhone SDK 2.2.1 package and installed them both. i still have the same problem after installing those, restarting, and doing the exact same steps above in Dashcode v. 2.0.1 (159). before this, this never happened to me in dashcode before.
any help as to what is happening here would be most appreciated. thank you.
— faddah steve yuetsu wolf
portland, oregon

I am also having problems with dashcode.
If I create a simple generic screen with text, an indicator and a text entry and then save, I see two errors. Sometimes it pretends to save, but afterwards it reverts to the initial hello prompt. Other times it complains that it cannot save (my memory is sketchy as to the exact error because I've been seeing it a while ago).
I initially installed the XCode that came with my macintosh last fall. I don't know the version, but could look it up. I've since then installed the XCode on the site and the XCode that comes with the iphone development kit. I've installed and uninstalled (using both rm and the unistallation command given in the installation readme) in several combinations of the above xcode versions. So far, I've had no luck.
Sorry, I have no answers, but our problems seemed similar enough for me to chime in.

Is there a possibility to start the VeriStand 2014 Gateway programatically using LabVIEW 2014?

Hello,
This is a reload of the Is-there-a-possibility-to-start-the-VeriStand-2011-SP1-Gateway because what worked in 2011 SP1 does no more in 2014.
I ported the code from the previous topic, do do the same thing (calling "__cdecl Int32 StartVeriStandGateway(out Int32 handle)" in "C:\Program Files (x86)\National Instruments\VeriStand 2014\Data\NationalInstruments.VeriStand.Gateway.dll".
Doing this from a .NET programme (console or windows process) or directly from a DLL node in LabVIEW 2014 seems to have no effect, knowing the .NET code worked in 2011 even when called from a Windows service.
Is there a new way to do it?
By the way, the "NationalInstruments.VeriStand.WindowsRegistry.GetInstallationDirectory()" method has disapeared from the assemblies.
Best regards,

Hi Jarrod,
You're rigth, after PC reboot the Gateway starts when calling the DLL node (OpenWorkspace & GetSystemStatus are called with no errors), but when I try to ConnectToSystem the program stays blocked into the sub-vi, although the code works well if the Gateway was previously started normally by running VeriStand from Windows.
I tryed to change the call policy in the DLL node (UIThread & any thread) but it seems doing nothing.
Please find here joined the test files and debug capture of the stall.
Best regards,

TS2551 Missing Info button from iPhoto (version 9.4.2)

Hello,
I am missing the info button from iPhoto (version 9.4.2) so I cannot see any information or manual add location (as shown on the tutorial video: http://www.apple.com/ca/findouthow/photos/#places). Please help!

That video is for iPhoto 8 (09) not iPhoto 9 (11). Yes, I know it's confusing.
To get to the info window and location click on the Info button at the bottom right of the iPhoto window:
This is a screenshot of the new info window (now a tray) and how it relates to the old style Info window of versions past:
OT

My backup file missing (info.plist)

I did upgrade from 4.2.1 to 4.3.3
but my 4.2.1 backup file missing.
missing is only 5 files ( Info.plist Manifest.mbdb Manifest.mbdx Manifest.plist Status.plist )
I was recorver HDD so got 4 files ( Manifest.mbdb Manifest.mbdx Manifest.plist Status.plist )
but Info.plist file is dont found.
please help me.
how can I restore from my backup file?
(orry, my english not good. )

When you look for the backup it could be possible that its saved as loaderbackup instead of just backup. What version of the desktop software do you have?

Business Role: ZSOLMANPRO (missing info in NavBar)

Hi
I am using Business Role ZSOLMANPRO for CRM Web Client UI (mainly for ChaRM).
Anyway, I have tested with SAP_ALL and SAP_NEW and everything appears perfectly.
When I remove SAP_ALL and SAP_NEW there are some items missing.
The below screenshot is with SAP_ALL and SAP_NEW. The YELLOW highlighted items do NOT show when these profiles are removed:
Why are yellow items not showing???
I have double checked and they are definitely assigned to the ZSOLMANPRO Business Profile via "Direct Link Groups to Nav. Bar Profile".
So I can't for the life of me work out why they are not showing!!
Any suggestions?
Thanks
Shaun

Please see the last item on this page:
http://scn.sap.com/community/it-management/alm/solution-manager/blog/2014/01/30/add-external-url-to-navigation-bar-web-ui
I have added in auth object C_LL_TGT and put the associated parameters in place. Still does not show .

CUP Request Audit Trail missing info about Mitigations & Risks

Hi All,
We use SAP GRC CUP 5.3 SP8 Patch 1.
When provisioning an SAP account through the GRC solution, we notice that the Audit trail is missing any details about the risks & mitigations that are applied to the request. Ideally we need to track the user who applied the mitigation and the time stamp for the action. We can see the Risks and the mitigations applied in separate sections in the request(but still missing the details i've mentioned above)
We have configured the system so that the risks need to be mitigated before approving a request.
Is there a way(some config) we can get this info too recorded in the Audit trail?
Thanks,
Anil
Edited by: Anil Sebastian on Sep 20, 2009 10:50 PM

I was getting an error in RAR that it couldn't send out the notification e-mail. The Java Mail Client had not been configured. Once I had done this, and restarted the server0, it worked.

Missing Info Objects and Business Content in IDES ECC6 with BI7.0

Hi All,
I do not see most of info objects like 0COMP_CODE, 0BUS_AREA, 0RESP_PERS etc. and lot of objects missing in Business Content too.
I have IDES ECC6 with BI7.0.
Could someone please help me to retrieve those objects.
Thanks.

Hi Kishore,
Thanks for the info. I am little confused. I thought i had full BW in my ECC6. What is the difference between ECC6.0 with BW and ECC6.0 with BW/BI7.0? BI7.0 has all business contents in it?
The IDES software has BW/BI 7.0 in it. That is what the person whi gave me told me. How can i verify that?
I have some knowledge of BW and i am trying to learn this new BW 7.0 on my own. Since it does not have BI content how can i proceed to learn on my own.
Please help. Thanks.

How do I add the missing info in songs on itunes?

So, I rearranged my music collection these last days and the information of every track is showing properly on Windows Media Player, however, iTunes is a different story.
There are many tracks with the wrong name, artist and album information, or it's even missing.
Is there an easy way to add all of this information? It would really be a PITA to add it one by one, and I want all of my music info to appear correctly on my iPhone.
And no, I didn't buy my music from iTunes, I got it from Amazon.com

Hi Nethudir,
Thanks for visiting Apple Support Communities.
When editing the song information, make sure you are viewing the song's Info window:
To view and edit a song or video's info in iTunes:
Click once on the track title to select it
From the File menu, choose Get Info
Click the Info tab
You will see a screen like the one below:
From:
Fixing Incorrect Song or Album Listings in iTunes
http://support.apple.com/kb/TA24677
Best Regards,
Jeremy

JasperReports Tutorial: Missing Record Bug

A few customers have pointed out a bug in the Generating Reports and PDFs From a Web Application tutorial at http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/reports.html. I have to admit that I am somewhat embarrased that I never noticed that the first record is missing from the reports.
I am trying to get the fix pushed out this week. In the meantime, for those who are using code from the tutorial, you should know that you need to either call beforeFirst() or execute() on the rowset before passing the rowset to the JRResultSetDataSource constructor.

Thanks

VeriStand 2014 Tutorial Missing Info

Similar Messages

Maybe you are looking for