Veritas Netbackup Client 6 for Solaris 10

Hi
Can anyone tell me where I can download Veritas Netbackup client for Solaris 10. We had the netbackup client for solaris 9 running but then we did a clean install of Solaris 10.
The netbackup server is running on an AIX server and I want to push the solaris client from there. We have separate license for all our clients running the netbackup agent but the netbackup server does not have the latest solaris 10 client. The AIX server do not have internet access, so I want to download the solaris 10 netback agent and put on the netbackup server.
Need to know the URL where I can download the netbackup agent for Solaris 10.
Many Thanks
Pioneer

Hi mcbrune1
I've check on the services in the client and all 4 services were up and running. Than I realized that this client was hardened a few weeks back. So I checked on the /etc/hosts.allow file and added an entry to allow the Master server to communicate using bpcd.
Now the Master server is able to see the client and everything seems to be working. Thanks for your help.
Cheers

Similar Messages

  • Veritas Netbackup Client Installed on Solaris 10 Zone Unable to Work

    Hi
    I am having problems with Veritas Netbackup client which had been installed on a Solaris 10 zone only. We are using Veritas Netbackup server which is installed on a Windows 2000 server and the NBU server is unable to add the new client for backup.
    The way I installed the NBU client was using the manual method where I installed directly on the zone. The zone I've created is a full root zone and the installation seems to be successful.
    Somehow the NBU server just can't see the new client. Do I need to install the client in the global zone to make it work? Is there any checks I can do to make sure I have installed the client correctly and that the services are running in the solaris 10 zone side? Any kind of help would be much appreciated.
    Thanks
    Xavier

    Hi mcbrune1
    I've check on the services in the client and all 4 services were up and running. Than I realized that this client was hardened a few weeks back. So I checked on the /etc/hosts.allow file and added an entry to allow the Master server to communicate using bpcd.
    Now the Master server is able to see the client and everything seems to be working. Thanks for your help.
    Cheers

  • Is Oracle 11.1.0.7 client for solaris relaesed or not?

    Just want to know if 11.1.0.7 client for solaris is releaseed or not. I only can find 11.1.0.6 client for solaris on OTN download site. I plan to upgrade my server to 11.1.0.7.
    Thanks
    Edited by: user6432683 on Mar 13, 2009 8:20 AM

    11.1.0.7 is a patchset,not complete software. As usual patchsets are available on metalink,not on OTN. You need a valid account.
    Werner

  • Instant client for Solaris AMD x64

    Hi,
    I am desperately looking for OCI instant client for solaris AMD x64. I tried instant client download page (http://www.oracle.com/technology/software/tech/oci/instantclient/index.html) but it is not listed there. I have no idea who to contact within Oracle or Oracle tech support.
    Any help is greatly appreciated.
    Thank you,
    Boris

    I've just downloaded the basic and sqlplus zip files and sqlplus works fine. sqlplus is linked to libclntsh.so.10.1, so I doubt that file is corrupt.
    instantclient_10_2> ls -l
    total 225992
    -r--r--r--   1 oracle   dba      1594191 May 19  2006 classes12.jar
    -r--r--r--   1 oracle   dba         1525 May 19  2006 glogin.sql
    -rwxr-xr-x   1 oracle   dba      29618728 May 19  2006 libclntsh.so.10.1
    -rwxr-xr-x   1 oracle   dba      7860792 May 19  2006 libnnz10.so
    -rwxr-xr-x   1 oracle   dba      1404480 May 19  2006 libocci.so.10.1
    -rwxr-xr-x   1 oracle   dba      70141168 May 19  2006 libociei.so
    -rwxr-xr-x   1 oracle   dba       146640 May 19  2006 libocijdbc10.so
    -rwxr-xr-x   1 oracle   dba      1913800 May 19  2006 libsqlplus.so
    -rwxr-xr-x   1 oracle   dba      1437952 May 19  2006 libsqlplusic.so
    -r--r--r--   1 oracle   dba      1540457 May 19  2006 ojdbc14.jar
    -rw-rw-r--   1 oracle   dba         6690 Apr 28 14:43 sqlnet.log
    -rwxr-xr-x   1 oracle   dba        11536 May 19  2006 sqlplus
    instantclient_10_2> ldd sqlplus
            libsqlplus.so =>         /tmp/ic/instantclient_10_2/libsqlplus.so
            libclntsh.so.10.1 =>     /tmp/ic/instantclient_10_2/libclntsh.so.10.1
            libnnz10.so =>   /tmp/ic/instantclient_10_2/libnnz10.so
            libkstat.so.1 =>         /lib/64/libkstat.so.1
            libnsl.so.1 =>   /lib/64/libnsl.so.1
            libsocket.so.1 =>        /lib/64/libsocket.so.1
            libgen.so.1 =>   /lib/64/libgen.so.1
            libdl.so.1 =>    /lib/64/libdl.so.1
            libsched.so.1 =>         /usr/lib/64/libsched.so.1
            libc.so.1 =>     /lib/64/libc.so.1
            librt.so.1 =>    /lib/64/librt.so.1
            libaio.so.1 =>   /lib/64/libaio.so.1
            libm.so.2 =>     /lib/64/libm.so.2
            libthread.so.1 =>        /lib/64/libthread.so.1
            libmp.so.2 =>    /lib/64/libmp.so.2
            libmd.so.1 =>    /lib/64/libmd.so.1
            libscf.so.1 =>   /lib/64/libscf.so.1
            libdoor.so.1 =>  /lib/64/libdoor.so.1
            libuutil.so.1 =>         /lib/64/libuutil.so.1
    instantclient_10_2> ./sqlplus /nolog
    SQL*Plus: Release 10.2.0.2.0 - Production on Tue Apr 28 14:47:04 2009
    Copyright (c) 1982, 2005, Oracle.  All Rights Reserved.
    SQL> exit
    instantclient_10_2> uname -a
    SunOS xxxx 5.10 Generic_120012-14 i86pc i386 i86pc

  • Rexec client for solaris.

    Can anybody please point me to a place where I can find rexec client for solaris.
    thanks in advance,
    rathi

    Client is only considered to be a separate product on Windows platforms. Client is a not a seperate cd with unix platforms.It is bundled with the server edition.
    You will need to download the server for Solaris. Once you begin your installation you will be able to select the Oracle client on the Available Products screen. I hope this helps.

  • Veritas volume manager for solaris 10

    Hi All
    which version veritas volume manager will support solaris 10 06/06.
    can you just update a link for reference
    Regards
    RPS

    Hello,
    we are currently using solaris 9 with veritas volume manager 3.5.So i would like to know if i upgrade to solaris 10 06/06.whether i can use 3.5 or not.
    Using the Veritas (Symantec) support site, I have found the following document
    VERITAS Storage Solutions 3.5 Maintenance Pack 4 for Solaris
    http://seer.support.veritas.com/docs/278582.htm
    The latest supported version listed for VxVM 3.5 with MP4 applied is Solaris 9. That means the answer is NO.
    I understand that searching the Veritas knowledge base might be tough and time consuming, but it's their product ...
    Michael

  • Proxy client for Solaris 8???

    Hello all,
    I am new to the list, so this may well have been asked before and I just can't find a reference to it...
    I am trying to set up a few Intel Solaris boxes for developmental purposes on a corporate network where we are constrained to using Microsoft Proxy Server by our corporate headquarters. Is there any creature that will function in place of (or as a replacement for) the Microsoft Proxy client that must be installed on Winx machines available for Intel Solaris 8? OR, is there a way around utilizing any sort of Proxy client and still be able to reach outside of our network?
    I've posted a question similar to thin on an MS discussion board as well.
    Thanks in advance,
    Randy

    Client is only considered to be a separate product on Windows platforms. Client is a not a seperate cd with unix platforms.It is bundled with the server edition.
    You will need to download the server for Solaris. Once you begin your installation you will be able to select the Oracle client on the Available Products screen. I hope this helps.

  • PPPoE Client for Solaris?

    Does anyone know if a PPPoE Client is available for Solaris?
    Thank you!

    I am unable to find any. However a co-worker and I have been talking about trying to use Roaring Penguin's (http://www.roaringpenguin.com     ) and running it using LXRun.
    I am not entirely confident it will work, however its our best try.
    Sun Please help us

  • Where to download client for Solaris - Need for 10.2.0.2

    I need to install a client on a Solaris sparc server.
    I am trying to find the client for 10.2.0.2
    So far I have had no luck.
    Appreciate the help

    http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201sol64soft.html
    I don't think there a client version with 10.2.0.2 available yet. You may have to install 10.2.0.1 client software and then patch it to 10.2.0.2 using the regular RDBMS patch (there is no 10.2.0.2 for client alone). I did this some time back.
    HTH
    Thanks
    Chandra Pabba

  • Look for SFTP client for Solaris 10x86

    We need an SFTP client which supports logins with and without passwords for sending files to remote SFTP sites.
    Up until now, we have been using a combination of Perl, Expect and sftp command but need a better solution.
    Have been unable to install into Perl the SFTP modules (Lots of problems with SSHA packates) to use it directly without Expect.
    I see a few (very few) commercial packages like one from tectia.com but am looking for perhaps an open source solution.

    You should be able to use the scp command (which is a part of ssh client on solaris, linux or cygwin/windows) in conjunction with the key based authentication
    For example, if you want a scheduled job as user1 on machine1 to be able to upload a file to a directory owned by user2 on machine2:
    On machine1, run ssh-keygen as user1 to create the RSA key pair (do not enter as password .)
    On machine2, as user2, cd .ssh, add user1's public key to the authorized_keys file.
    e.g.
    ssh-rsa dWU+bihN7kYFYoQ5ycNiIl2urtzdS5GNcCtMSz
    Nykgylo4ccfoAhJhAOVS3htN6hTXk45O9xrpLFrC7BzAq
    aQiuuKTgxT0mOVmzFjTozwQIQmy9EUt= user1@machine1
    Also, update /etc/ssh/sshd_config with
    RSAAuthentication yes
    you will need to ssh from user1 to machine2 and as user2 to machine1 to make sure the known_hosts file for each user gets updated

  • Searching Oracle 8.1.7 Client for Solaris on x86/Intel

    Hi all,
    I need an Oracle client 8.1.7 running on a Sun Solaris on a Intel/x86 chipset (in VMware)
    Exists there any location to download this client?
    thanx for help!
    Andreas
    Salzburg, Austria

    Are there plans to have a Solaris x86 version downloadable on OTN? I am making the OS decision for a new development server. I would like it to be Solaris x86 but if Oracle is a no-go on Solaris x86, I will have to use Linux or... hate to say it... M$

  • LDAP client for solaris 9 with ds5.2 on other box

    Hi
    I have ds5.2 installed on Box1. I am trying to configure ldapclient on solaris 9 box. I want this to point to existing ldap server for authentication. Sun documentation is not clear about how to do that ? as some of the switches mentioned with ldapclient doesn't work. Most of the solutions I saw are on integrated solaris 9 ds server configuration. e.g idsconfig etc. I am not finding how to do basic authentication of solaris9 cient with any ldap server (ds5.2) installed on some other box.

    The syntax of ldapclient changed in Solaris 9 (at least by 9 12/03). You now specify it like this:
    # ldapclient -v init -a profileName=cn=myProfile,ou=profile,dc=example,dc=comIf you're using Proxy Authentication add the following:
    -a proxyDN=cn=proxyagent,ou=profile,dc=example,dc=com -a proxyPassword=ClearTextPWYou should have been able to create a profile (storing it in the DIT) when you ran idsconfig. If you took the default name of "default" (cn=default,ou=profile,dc=example,dc=com) you might not even have to specify the profile name to ldapclient.
    To generate a new profile and store it in the DIT use:
    $ ldapclient -vgenprofile -a profileName=cn=myProfile,ou=profile,dc=example,dc=com -a defaultSearchBase=dc=example,dc=com ...With your various attributes for your profile as specified in ldapclient(1M).
    As for pam, you have to decide which you're going to use: pam_unix or pam_ldap. Note that the Solaris pam_ldap is very different from the PADL pam_ldap used under Linux and elsewhere (this makes it easy to find apparently conflicting advice).

  • SOCKS client for solaris for ftp and scp sftp

    Hi,
    we have a SOCKS 5 proxy server that connects to the Internet and we would like to configure one of our Solaris Zones to be able to ftp,sftp and scp though this proxy server to the Internet.
    My questions are:
    Is their an inbuild program in solaris that can do this or any good 3rd party apps
    We still want to use ftp, sftp and scp normally internally without the SOCKS server = we do not want to scp by default out of the socks server and rather use a command line option to either use SOCKS or not use SOCKS.
    What are our options.
    Thank you for your help

    Hi,
    You can try
    fireftp addon with Mozilla browser extension
    gftp http://www.gftp.org/
    cross ftp foundation..

  • Is Oracle client (v9.x.x.x or any) available for "Solaris 10 AMD64" ?

    Is Oracle providing a client for "Solaris 10 AMD-64" ?
    If so could you let me know the link to a trail/download s/w ?
    Thanks in advance.
    regards,
    Srinivas Jaltaru

    Hi Hans!
    Thanks much.
    Currently we are using Oracle database v9, so we are more interested on Oracle 9.x client to be run on "Solaris 10 AMD64".
    I searched for the combination of "Oracle client 9.x"/"Solaris x86-64", and came to know this combination is missing(or unavailable) from the client list provided at Oracle web site.
    Regards,
    Srini J

  • Requesting Oracle Db Client 9i or 10g for Solaris

    Dear friends
    What is the name in "combo box" in metalink when i open an SR that identifies "Oracle Client for Solaris".
    i dont know what it is. Please you could help me?
    thanks
    cesar.

    I believe Oracle don't have CD that only have Oracle client for Solaris.
    They only have client only CD for Windows. To install Oracle client for Solaris you need to use Oracle server CD/DVD, which usually come with a combo box with all kinds of other products as well.

Maybe you are looking for

  • Macbook (late 08) 13.3" -- miniDV to DVI adapter and Dell 24" 2405 FSP Flat

    All Just purchased a Macbook 13.3" and bought the miniDV to DVI adapter for my 24" Dell 2405 FSP. For whatever reason, I cannot get system prefs to "detect display". I am not sure if the cable is broken out of package or there is a problem with this

  • Audio and video timing thrown off on export to Adobe Media Encoder

    Hi. I have a two and a half minute video which includes a lip-synched character.  Everything is working perfectly inside Premiere Pro CS4. When I export this using F4V format, I set it to match frame rate as source then typed in 24fps for good measur

  • Sales analysis report- showing & totaling both Invoices & Credit memos on o

    I have written a Several sales analysis reports based on INV1 tables and RIN1 tables, (Invoice lines and Credit memo lines) for SAP B1 using crystal. I would like the data from both the invoices & the credit memo to list & total on the same report. B

  • Dynamic Image (.gif) from URL into adobe Form by SFP

    Hi all I post the comment of Shamila because I have the same problem I need to place an image in the Adobe form based on the url. I have written the following formcalc script in the image field form ready action ImageField1.value.image.href = "http:/

  • Free text

    Hi all, In the present script i need to include a free text between a description line  and first line item.client has given just that with out any more info.I am not aware of free text.please tell me how to achieve the requirement.