Veritas VxVM demo license expired

Hi,
Anyone knows or tested what will happen when VxVM license demo expired? And what happen if the server was rebooted with rootdisk under vxvm control.
Thanks for your help.

There is a few options.
Dun reboot.
try set system clock backwards to before license expired may "fool the license" but not sure how it will affact your data.
Last old trick: use hid2(if you can still find it) the vm license if I'm not wrong should be tied system hostid, if you have another box with valid permanent vm license, you can first try to change the system hostid to the system hostid which is using the permanent vm license and use the vm license
example of the old way we did it was:
System A uses 84b0231b (uses perm vm license)
System B uses 84b0231c ( uses temp vm license)
on system B edit your /etc/rc1.d S10* files
add the following entry at the last line
hid2 84b0231b (so that every reboot it will mask itself)
reboot system then try to apply the perm vm license from system A, shud work.

Similar Messages

  • Removing Veritas DEMO License

    Hi All,
    I�m running Cluster (2x440 and 2 x 3510) with sun cluster, veritas volume manager and oracle RAC.
    During install we have used veritas volume manager demo license and later upgraded to a final license.
    For some reason I can�t start the cluster and when I check the VxVM licenses it shows both licenses (DEMO and the Final). The DEMO license expired and now I can�t start my cluster.
    Anyway of removing the DEMO license ?
    Regards,

    demo veritas license never effects sun cluster. however if it is effecting then you need to identify what version of veritas vm it is.
    3.2 and below
    /etc/vx/elm
    the files there are the license files. identify the demo and remove it.
    to identify move one file a time to /var/tmp and do vxlicense -p
    for 3.5 and above the licenses are in /etc/vx do i find for licnese and you will see the files

  • Newbie: Veritas (VxVM 4.1) License question

    Hello fellow Admins,
    This is my first upgrade from using a DEMO license to a Perm. license on Veritas Volume Manager.
    During an upgrade on one of our production systems we used a DEMO license to start and configure all Veritas Volumes on the new sever. Once everything was up and running we shutdown the old server and migrated the old 3.2 license to become a 4.1 license. I have successfully applied it now on my Solaris 10 server.
    Now to my questions:
    When i run 'vxlicrep' the systems displays both the Demo license and the new permanent license. I have ~10days left on the Demo license.
    Can i remove the Demo license under /etc/vx/licenses/lic/*.vxlic or does the system automatically start using the Permanent License once the Demo has expired.
    Is there a reboot needed to activate the perm lic?
    Regards,
    Pierre

    Case closed.
    I was sort of on the right track. After deleting the .vxlic file one has to init the daemon for the new license.
    1, Delete or Move the license key file in /etc/vx/licenses/lic/*.vxlic
    2, Then issue: vxdctl license init [enter]
    vxdctl license init forces vxconfigd to rescan the licenses and make the new licenses available.
    Regards,
    Pierre

  • UCCX 10.6.1 - Expired, Auto-generated Demo license crashing MCVD-LIB_LICENSE startup process?

    Anybody else experiencing this?
    I upgraded from version 9.0.x to 10.6.1 at the end of December.  It generated a Demo License (that wasn't needed) during the upgrade, which expired on Feb 27th.
    I restarted the engine on the HA node last night, and it won't start up now.
    On start-up, MCVD Log shows: 
    6953: Mar 09 10:55:03.978 EDT %MCVD-LIB_LICENSE-7-UNK:General Runtime Error in using m_FlexlmParser details are : Exception=java.lang.NullPointerException
    The process stops reading/parsing licenses after this and acts like it would if it had no license.
    Good thing this wasn't my primary engine.

    Yes,
    That's what I ended up having to resort to.  I had numerous demo licenses across the years because of rapid expansion of call volume (agent seat temp licenses to act as a bridge gap while permanent licenses were purchased and delivered).
    It ended up being caused by two demo licenses that expired on the same day, it seems.
    Just to add to your answer though... DO NOT DELETE THEM FROM THE GUI.  This will put your engines out of service until all offending files are deleted, and may require a reboot even then.
    Thanks...

  • CUCM Demo License Renewal

         i believe my demo license may have expired.  i can access all the cucm node servers in the cluster but not the activity buttons within each service(admin,serviceability,etc) . i get this msg on the admin page:
    Licensing Warnings:
    System is operating on Demo licenses. Please upload relevant license files
      what's the process/steps to renew the demo license?           

    Its called buy licensing at this point.   The demo license does not run more than 1 or two nodes.  So not sure how many nodes you have or trying to activate. Usually you can only activate a single node (Publisher) on the Demo license in 8.6

  • CUCM Demo License

    Hello,
    I running CUCM with demo license is there a time limit to use this demo licenses?
    Regards
    Leonardo Santana           

    This is no longer true starting with ELM on CUCM 9.0. There are no licenses installed by default and ELM will shutdown the products after a grace period.
    A 60 day grace period allows administrators to add users even if insufficient licenses exist within the ELM license pool. If sufficient licenses are not available once the 60 day grace period expires, then the Unified Communications application(s) will no longer allow any further changes; however, the application(s) will continue to function with no loss of service.
    Unity Connection will outright halt services when the grace period expires.
    Your only path for a permanent lab/demo would be to purchase an NFR kit.
    Please remember to rate helpful responses and identify helpful or correct answers.

  • CUCM 7 - Activate Demo Licenses

    Hi all,
    I got a CUCM Demo version from my compnay for trial before implementing CUCM 7 company wide.
    As I installed the application I had no problems, however, when I try now to access the GUI / Devices / Phones and add a phone I get this error msg :
    Add failed: [4935] allocated licenses consumed by  used and pending. Please u[pload additional licenses and try again
    How can I activate the Demo license so I can add a Phone for trial purpose?
    Not sure if that is in regards to this, but if I try to start Cisco Call Manager the below error appears (Picture)
    As you can see from the Picture I have 150 licenses, but what am I doing wrong?
    Thanks,
    Chris

    Hello,
    As per the previous recommendation you should be able to restart 'License Manager' service under Network Services in Servicability. That should help clear the issue. If that does not help, you could open a case with Licensing  and they can generate 'temporary licenses' which expire after a certain time period.
    Hope this helps!
    Vajrender

  • Db2 license expiring in SAP Dev system

    hello All,
    Im new to DB6 database and we are experiencing db2 license expiring.
    What logs should I first investigate and and what SAP tcode can help me with this aside from SM21.
    Thanks and hoping for your kind feedback.
    kharlos

    Hi,
    From SAP, I am not sure but from OS level, you can easily check it.
    You can check Alert Logs in DBACOCKPIT transaction, from there I think you will get some information.
    Thanks
    Sunny

  • In-house test and demo license

    Some integration tests such as CA-DMI, BC-XOM, BC-SNC,etc. can not be performed via remote-access DPA systems. To overcome this problem, vendors can install SAP software on thier own sites, by purchasing a Test&Demo license.
    Here is the information for Test&Demo license:
    IDES Test & Demo License
    It has never been easier to discover and demonstrate the world of mySAP Business Suite e-business solutions than with the Internet Demonstration and Evaluation System (IDES) with its preconfigured installation of mySAP Business Suite components, populated with the data and business processes of a fictional enterprise. This model corporation consists of several companies located around the globe with clearly defined and independent business tasks.
    Interfaces, suitable for testing: AC-CCI, BC-CTS, BC-SNC, BC-SSF, BC-LDAP-USR, CA-DMI, CA-EDI, EP-IVW, FI-EDI, HR-OCI, IS-ADP, IS-B-DCH, IS-ITA, IS-T-EBC, IS-TAS, IS-TPS, IS-U-WM
    Requirements: PC with moderate power and server operating system together with trained administrator to install and run SAP system.
    How to obtain: In EMEAyou can order the Test & Demo License from the Software Partner Program (mailto:[email protected]). In the Americas, please contact SAP America at mailto:[email protected]

    Hello Veeren,
    Hope this helps:
    Q. How to obtain access ?
    Just contact the ICC guys <a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/sdnservices/icc">http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/sdnservices/icc</a> and they will help you out with this. We had a lovely experience with the consultants for our XI Content Certification.
    Q. How long does this process take ?
    In our case, it was less than a week.
    Q. What's the cost ?
    We were fortunate to do it during the promotional period and did not have to pay anything. The ICC consultant would help you with the details.
    Q. How well does the system work ?
    The system was quite fast and the access is via ITS / SAP GUI for HTML.
    Q. Do you get access to only the built-in data or you can create your own ?
    Besides the XI Server, it was an IDES system in our case and we were also able to create data.
    All the best for your certification.
    Regards,
    Parag.

  • Adobe Photoshop CS4 says license expired on first day of usage.

    Downloaded Adobe Photoshop CS4 trial version yesterday(5/22) and install it today 5/23 on a new PC. When I tried to open it, it says license expired...anyone know why?  I have uninstalled and re-installed and it says the same thing.

    This Adobe knowledge Base article deals with the problem.
    http://kb2.adobe.com/cps/405/kb405970.html

  • Adobe Acrobat 9 Trial License expiring early

    I installed Acrobat9 Pro extended trial version to test out the software and after trying to open a 2nd pdf i recieved a windows system error 0x7e and restarted. After restart I open up Acrobat again to the message of "License expired - please register a license" This installation was only 5 days into the 30 day installation period. This error occurred on the SAME day of installing again after I installed a trial version of Acrobat 9 pro. Please help.
    I am unable to install a new copy on my computer.
    - Whats Wrong Adobe?

    I should of speciied the machine:
    brand new. first user on machine.
    XP Sp3
    Optiplex 755
    Intel 2 Duo
    E8300 @ 2.83 GHz
    1.98 Ghz

  • Problem with Demo License

    Hi,
    I install the version 6 update 2 on my Solaris 7 sparc, with the demo license. But when I try to use cc I got this error
    License Error : Licensing product (Sun WorkShop Compiler C SPARC).
    License File:
    /opt/SUNWspro/bin/../WS6U2/bin/../../license_dir/sunpro.lic,node
    License file does not support this version
    Feature:workshop.c.sparc
    Application version > License version:6.000000 > 5.000
    FLEXlm error:-21,126.
    Any idea?
    Thanks

    HI,
    Please check and make sure your license file
    "sunpro.lic,node" is indeed having the demo
    license Forte 6 Update 2.
    It appears from these errors that this may not be
    the case.
    Hope this helps.
    Thanks,
    Gopinath.

  • CUCM 10.x Demo licenses

    Hello, it may be bug or something like that, but the fact is that when I try to get demo licenses for CUCM 10.0 via cisco.com/go/license and choose licenses for 10.x I get licenses for 9.x versions.
    Where can I get demo licenses for CUCM 10.x or may be convert demos for 9.x?

    We installed CUCM 10 more than a month ago, made integration with CUCM 9 and Avaya and then there were many holidays in Russia and nothing was done for testing purposes, but Cisco Licensing Team ([email protected]) helped me a lot and i got some demo licenses

  • Cisco UCCX 9.0.2.10000-71 - Demo License Issues

    Hello Cisco Support,
    I have installed Cisco Unified Contact Express 9.0.2.10000-71 on a Cisco UCS C220 M3 Server and have used the demo license that comes with the ISO Image on the server. After install, I have used the Premium Demo License. I have integrated UCCX 9.0 with CUCM 8.6(2) SU2. 
    I can say that everything worked fine until I wanted to test the Cisco Agent Desktop (CAD), Cisco Supervisor Desktop (CSD) and Cisco Agent IP Phone Service.
    I am pretty much sure that the configuration on either the CUCM, UCCX is set up correctly but I might miss something.
    When I tried to fire up the CAD or CSD, I am getting the following error message: "A licensing error has occurred. Please try again in five minutes. If the problem persists, please see your log files or System Administrator for details". then followed by License Server is down.
    I have also setup Agent IP Phone Service on the CUCM and each time I select the Service on the IP Phone, an error stating that could not connect to the IP Phone Agent Service.
    Below is the information for my setup:
    admin:show uccx version 
     Active UCCX Version: 9.0.2.10000-71
     Inactive UCCX Version: NA
    admin:show uccx license
    Configured Licenses:
    Package: Cisco Unified CCX Premium
    IVR Port(s): 50
    Cisco Unified CCX Premium Seat(s): 25
    High Availability : Enabled
    Cisco Unified CCX Preview Outbound Dialer: Enabled
    Cisco Unified CCX Quality Manager Seat(s): 25
    Cisco Unified CCX Advanced Quality Manager Seat(s): 25
    Cisco Unified CCX Workforce Manager Seat(s): 25
    Cisco Unified CCX Compliance Recording Seat(s): 50
    Cisco Unified CCX Maximum Agents: 400
    Cisco Unified CCX Licensed Outbound IVR Port(s): 25
    For dynamic content like the Inbound ports in use and Outbound ports available and in use please check using the Cisco Unified CCX Administration.
     Command successful.
    Could you please help me out figure out what could be the cause of me failing to log onto the CAD/CSD and also IP Phone Agent Service?
    Warm regards,
    JK.

    Hello Aman,
    Thanks for the link.
    How do I go about turning off the the SYN Flood Detection Mode state in Option 2 on the UCCX Server.
    Option 2: Turn off SYN Flood detection mode. Risk: Leaves the server open to SYN Flood.
    I have checked and my Windows XP SP3 computer where Cisco Agent Desktop is installed has Windows Firewall set to off at the moment.
    Warm regards,
    JK.

  • Evaluation license expiring early

    I have setup two instances of the Server 2012 Eval for the purposes of testing the failover clustering system with a legacy Oracle database control system.  Because of several mishaps, I was required to reload the OS on each machine at least three times
    (DirectAccess/RAS refused to be configured, other annoyances). 
    The problem is the eval license is failing after 30 days.  The server displays a "license expired" indication, and then the machine shuts down unexpectedly or stops RPC communications - which tend to stop the test. 
    I have tried full MS updates and "registering" the trial to no avail.
    The trial has been underway for 45 days or so and the OS reloads stopped after the first two weeks.  The first machine dropped off last week (forcing an OS reload), and now the 2nd is having the same issues.
    Any suggestions other than recreating the machines and moving really fast?
    Thanks.

    My build 9431 2012 R2 Datacenter Evaluation install has also expired early.
    Is this activation process still out of commission?  The emails and website indicate that the preview should last 180 days, but it has only been just over 90 for this install.  Any tips for getting rid of the Demi-hourly restarts?
    Details from the  SLmgr.vbs /dlv
    Microsoft (R) Windows Script Host Version 5.8
    Copyright (C) Microsoft Corporation. All rights reserved.
    Software licensing service version: 6.3.9431.206
    Name: Windows(R), ServerDatacenter edition
    Description: Windows(R) Operating System, RETAIL channel
    Activation ID: c3dbac02-e65b-48bc-a61e-e14befbdd674
    Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 03612-01333-250-000010-00-4105-9431.0000-0232014
    Product Key Channel: Retail
    Installation ID: 725227142924861908450757929654273910439350030537505049645589283
    Use License URL: https://activation-v2.sls.microsoft.com/SLActivateProduct/SLAct
    ivateProduct.asmx?configextension=Retail
    Validation URL: https://validation-v2.sls.microsoft.com/SLWGA/slwga.asmx
    Partial Product Key: VQRG7
    License Status: Unlicensed
    Remaining Windows rearm count: 999
    Remaining SKU rearm count: 1000
    Trusted time: 2014-01-23 10:06:36 PM

Maybe you are looking for