Veritical line appears when using Camera on my iPhone 3GS

My iPhone 3GS camera shows a vertical line on the left every time I activate it. Any suggestion to fix it is appreciated. Thanks!

check your other app folders and screen.
check restrictions, if the above don't work then do this:
settings - general - reset - reset home screen layout.

Similar Messages

OJ Pro8000 thin black line appear when using photo paper but not regular paper

When using both my OJPro 8000 and my wife's OJPro8500, thin black lines appear every 7/8" on the paper when using photo paper. This does not happen if I print on regular bond paper.

Anything? It's only happening in Photoshop, other apps print fine.

Black line appearing when using Magic Bullet

I have installed the latest Magic Bullet suite and it all works fine within Premiere, except when I apply a Look. In the Looks Builder the image looks fine. However, when I go back to Premiere a black line appears on the left hand side of the image. In the Effects Control if I click on 'Motion' or the effect itself, 'Looks', then the black line disappears, but it then reappears when I click off or try and render the image. It is unclear whether the error is in Premiere or with Magic Bullet. I am working with HDV widescreen footage. Any advice would be greatly appreciated.

Make sure that the properties for LooksBuilder.exe are set to run in Windows XP (Service Pack 2) compatibility mode. It may help. If not, provide a lot more details and start with the 16 questions at the end of the included Wiki link:
Some suggestions

Extraneous line appears when using Zig Zag effect

This is the procedure that I'm using:
1. Create 3 horizontal lines with only a stroke color, no fill. Each line is a different stroke color.
2. Using the Blend tool, blend the three lines to get a nice linear gradient.
3. Make an Art Brush from the 3-line blend.
4. Create a path, for example, just a straight line, and apply the new brush.
5. Choose Effects > Distort > Zig Zag with Smooth turned on. If the zig zag is shallow and diagonal line appears in the path that does not belong, ruining the effect. The extraneous line will print, so it's not just something that appears on the screen.
Is there any way to avoid this? If the bumps in the wave are steeper, the diagonal line doesn't appear.

Hello Jay,
 
 What I did is to use really small circles (3 Circles: Red, Yellow, and Blue) Blend them together with specified steps of 100 (Option+Blend Tool+Click). The amount of steps depends of the distance between each circle.
 
 Then I created the "Art Brush" and apply it to a straight line.
 
 After that, I rotated a copy of the line 45° and a third line another 45° (this will make 90° with 3 lines).
 
 Selected the Vertical and Horizontal lines, then select the "Zig Zag" effect and set the values that you want. The diagonal line I reset the size of the "Zig Zag" effect to very low value.
 
 After that I use "Convert Anchor Point Tool" (Shift+C) to smooth the curve of the blending. To have better results I suggest to use more than 3 lines to make a 90° turn (Just keep in mind that the middle lines should have a "Zig Zag" effect size of low value.
 
 
<a href="http://www.pixentral.com/show.php?picture=1fm7KrGLb3VxTRWESwjMVlnShprH" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1fm7KrGLb3VxTRWESwjMVlnShprH_thumb.jpg" border="0" />
 
 But another solution is to first make the Mask of the shape that you want, create a Rectangle with the gradient that you want and use the "Envelope Distorted" ("Envelope Distorted"+ "Make With Warp" + Style "Arc"). Please make sure that you already selected "Distort Linear Gradients" under "Envelope Options"
 And then make the mask.
 
 
<a href="http://www.pixentral.com/show.php?picture=1vG69C4xb8gausk6fxfmkMOE4ggtzB" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1vG69C4xb8gausk6fxfmkMOE4ggtzB_thumb.jpg" border="0" />
 
 
<a href="http://www.pixentral.com/show.php?picture=1IUevEolmMjG7JkjMAKgf2N4zlb0" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1IUevEolmMjG7JkjMAKgf2N4zlb0_thumb.jpg" border="0" />
 
 I hope this helps!

I have the new ipad and when I stretch the screen a horizontal line appears when I scroll whatever page or location I am on. The line is not there if the screen is minimised. Any solutions?

I have the new ipad and when I stretch the screen a horizontal line appears when I scroll whatever page or location I am on. The line is not there if the screen is minimised. Any solutions?

I can't personally as I never really liked nor used the picture frame feature in iPad. Just search in the App Store and read customer reviews and you'll likely find something you'll like.

My files, photos, email files, software programs, and all information did NOT transfer over to Mavericks (from Mt. Lion). How do I get all my stuff to appear when using Mavericks?

Will someone please help me?
My files, photos, email files, software programs, calendar info, and all information did NOT transfer over to Mavericks (from Mt Lion). How do I get all my stuff to appear when using Mavericks?
My email did transfer over.
Thank you.

First click on the Apple > Logout and Log back in or restart the unit see if that solves it. If it doesn't do you have a backup of your system prior to upgrade? Check Disk Utility and see how much space is being used to make sure the drive wasn't somehow erased.

Images on Facebook do not appear when using different web browsers

Images on Facebook do not appear when using Safari on my Macbook Pro (I've tried Google Chrome too with the same result). This makes me think it's a setting within OS Mavericks that I'm missing. I have not seen this issue on any other computers. This only occurs on my, and others' profile pictures on my profile page and on the news feed, not photos that are posted in albums or on walls. and yes, i have images enabled in Safari.
In safari the images don't appear, and in their place is a small blue "?" square >>.
In Chrome it appears as a broken image link >>
Has anyone encountered this? Is there a fix? It is very annoying.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

There were frequent purple line appear on photo taken with my iPhone 5 camera, is this the defect of product?

there were frequent purple line appear on photo taken with my iPhone 5 camera, is this the defect of product?

So it looks like I ran out of AppleCare two weeks ago, what a shame. I guess it's not worth $260 to receive a new handset simply for a dusty camera. However this is still annoying due to the fact that the phone shouldn't have dust behind the lens anyway. I think this situation is a bit unfair since this is a malfuntion of hardware and it is also disappointing that so many people have this problem with the iPhone 5 in particular. :X
Thanks for your help though Templeton!

Error 1074396120 appears when using IMQA copy

error 1074396120 appears when using IMQA copy,when i used in vision its working but when i tried to execute in labview its showing error image not found and not valid image. pls help me regarding this .

Have a look
Thanks and Regards
Himanshu Goyal | LabVIEW Engineer- Power System Automation
Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
It Only gets BETTER!!!

When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG

When using Camera RAW after editing photo I can only save file as DNG, I want to save as JPEG. HOW??
THANKS LLOYD

BARBARA,Yes, you are so right, I was deceived by the eve button, Just tried it and it WORKS GREAT-Thanks for the help.
THANKS AGAIN AND HAVE A GOOD DAY Lloyd
From: Barbara B. <[email protected]>
To: Lloyd Bennett <[email protected]>
Sent: Tuesday, January 13, 2015 11:46 AM
Subject: When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
created by Barbara B. in Photoshop Elements - View the full discussionYou are being deceived by the Save button, like most people. That button is not the Save As button, really, but a link to the DNG converter. To save your raw file in an image format, click the Open button instead and then save in the format of your choice in the editor. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7092207#7092207 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7092207#7092207 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Apple Logo Screen (turn on screen) suddenly appear when using

Apple Logo Screen (turn on screen) suddenly appear when using my iPad Mini Retina, but every thing goes back to normal after. It happens like few times since I bought my iPad since December. My OS is ISO7.0.4

The iPad basically re-booted.
Eveytime it re-boot, take note of what app you are running. You need to find out what is causing the re-boot.

IOS 7 crashes when using notification center on iPhone 5, made App Store disappear on 4s (though still available in search)

when using notification center on iPhone 5, made App Store disappear on 4s (though still available in search). Crashes in app and in home screen. 7 crashes today.

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
Also consider deleting and reinstalling the Mail Account in question.

HT1495 how to delete apps when using one account for iphone 4s and ipod4, can delete from phone but not ipod

How do we delete apps from ipod 4 when using same account as iphone 4s, we can delete from the phone but not the ipod, and when i get an app on my phone it automatically comes up on the ipod and visa versa, now ipod is full,

Read the article from which the thread was posted, it clearly defines how to use multiple iDevices on a single computer.
Sharing an Apple ID is not an issue.

Hi there, i purchased an app called Top Movies. But when using it on my iPhone to buy movies, it gives me the error 'Your request could not be completed'. Please help.

Hi there, i purchased an app called Top Movies. But when using it on my iPhone to buy movies, it gives me the error 'Your request could not be completed'. Please help.

Ok.. I see the app now in iTunes.
Best thing to do is email the developer of that app.
You can do that here > http://www.lymobilesoft.com/contact.html
Make sure and tell them exactly what the error says:
it gives me the error 'Your request could not be completed'.
Instead of using a third party app, you can download movies directly from the iTunes store.

TS3694 keep geting error code 1015 when trying to update my iphone 3gs any tips to sort it out

keep geting error code 1015 when trying to update my iphone 3gs any tips to sort it out

https://discussions.apple.com/message/19425288#19425288
https://discussions.apple.com/message/18882000#18882000
https://discussions.apple.com/message/18526759#18526759
http://support.apple.com/kb/TS3694?viewlocale=en_US
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go toSettings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
There is not much you can do, sorry

Veritical line appears when using Camera on my iPhone 3GS

Similar Messages

Maybe you are looking for