Verity server license issue

Hi,
I have coldfusion/verity installation and everything is fine
after the installation. I ran the creation of verity collections
with no problem at all.
But after sometime, the "k2server.exe" won't run anymore. And
when I ran "k2server.exe" on the DOS prompt, it told me that I have
more CPU than that was licensed to verity. (I have two CPU's and
verity logs showed that it's binding only to a single CPU).Then
after that, verity "k2server.exe" will shutdown inself. When I
tried to re-install verity, "k2server.exe" ran properly again.
Any ideas what is really causing this problem. Im running
coldfusion/verity on windows 2003
Thanks in advance.

Hi Ahmed,
Just a thought :
can u check the number of servers appearing in system ----servers and system----cisco unified CM.
also, is database replication fine
regds,
aman

Similar Messages

Licensing issue with Windows Server 2012 R2 Essential

Hi,
we purchased a server that came with Windows Server 2012 Essentials. and we found out some of the issue regarding the licensing. I would like to verify it with the experts here.
1. This Essential O.S. cannot be deployed as a member server in the domain, only Windows server 2012 r2 Standard and data center is capable as deploy as a member server?
2. does it work with a single domain with multiple domain controllers and one primary domain controller? Example, 10 offices in different states, each location has a domain controller in their office, I'm installing to install this Essential server as another
domain controller in one of the offices for redundancy purpose. I promoted this server into domain controller with success, but it gives me an fsmo error everyday, and warning about shutting down if i don't transfer the fsmo role to this server.
3. which leads to this question, so this Essential OS can only be deploy as a single domain as the primary domain controller? Up to 25 user and 50 device license?
4. Is it possible to deploy it as a domain controller (that office has less than 25 users) in that office while syncing correctly with the other 10 domain controllers in other offices, they are all in the same single domain? I can't make this work, and I
think due to the Essential O.S.'s limitation.
5. we use a vpn connection to connect all the office together, and all the domain controller uses lan ip address to communicate with each other.
Thank you for the help in advance. I have been researching for the past couple days, but I still couldn't get a clear answer. Thank you again.

Hi Cliff,
Thank you for your reply.
1. We will get a new server 2012 r2 standard to deploy as member server.
2 and 3. Only ONE domain controller can hold all FSMO roles in a single domain, correct? Currently an windows 2003 enterprise, this is our first server in our domain, it holds all the FSMO roles currently.
4. Yes, we realized essentials will not work for us, so we are switching to 2012 r2 standard to deploy for the new
domain controller for our new office, still under the same domain.
5. This wasn't a question, just wanted to give out the connection information.
The problem was that We didn't read the Essentials in detail when buying the new server, on dell website, it said it was perfect for small business, we didn't know it has to run as a primary DC. it was great in price, and it doesn't need CALs.
but we quickly realized after deploying it as a DC, it gives us error about Server Licensing compliance, and will shut down automatically. Then we were going to use it as a member server to run application, and realized we couldn't. So we are returning the
server, and getting a new one with standard r2 2012 and CALs license.
It was a costly mistake.
Thank you again.

Terminal Server Licensing 2003 to 2012 mixed environment - issue

We have 1 2003 Terminal Server and 1 2012 RDSH. We recently
migrated 2003 Terminal License Server to new 2012 RD Licensing Server.
On 2012 RD Licensing Server we have been instaled 20 - 2012 RDS Per Device Cal and 20 - 2003 TS Per Device Cal.
I sometimes works on Terminal
Server 2003 or 2012. And here is a problem with issued Terminal license for Device. When I Logoff from
2003 TS and then I log in to 2012 RDS - the 2012 RD Licensing Server issued new license for my computer on this same name. When I do the same in the reverse order - the 2012
RD Licensing Server issued next new license for my computer. I do this several times and now I have 10 permanent 2012 RDS license issued for this same computer with this same name, and 5 temporary 2012 RDS license issued for this same computer and 1 temporary
2003 TS for this same computer.
I have no idea how resolve this problem.
Thanks in advance for any help anyone can provide.
Lukas

Hi,
I probably tested everything.
- reinstalling license server
- reactivate license server
http://technet.microsoft.com/en-us/library/cc739075(WS.10).aspx
http://support.microsoft.com/default.aspx?scid=kb;EN-US;983385
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ca458045-fb99-4c63-ad55-b738f2d5f49d/ts-license-manager-problem
And still I have the same problem.
From my Event Viewer:
Log Name: System
Source: Microsoft-Windows-TerminalServices-Licensing
Date:
Event ID: 42
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer:
Description:
An error occurred in policy module "Policy Module for company Microsoft Corporation product A02 has denied new license request with error code 14.
I searched for everywhere to solving this problem. Without positive results :(
Please help!

ORA-20001: The printing engine..Is this related to a BIP licensing issue?

Hello all,
The error "ORA-20001: The printing engine could not be reached because either the URL..." happens in 2 cases:
<pre>
1. When our BIP is down or being bumped
2. As an APEX administrator, in workspace environment settings, the print server is set to OFF.
</pre>
I'm thinking that this is a licensing issue but I need some clarification on what is causing the error, because all we are trying to do is bring up a PDF report that a user can open or save. BIP is not involved at this point. Is it because the report was developed using BIP that APEX needs BIP up? How does APEX even know the report was developed using BIP? Were are using APEX 3.2.1.00.12 and BIP 10.1.3.4.1
The error happens when a user clicks on a PDF icon that calls an "After Submit Process". The following is the code and the report that was created in BIP is loaded into APEX with a "Named Columns (RTF)" layout type.
Alex.
declare
l_xml                         clob;
l_template                    clob;
l_request_blob                blob;
l_response                    blob;
begin
   ...call up a stored proc to populate l_xml with report data
-- Fetch template
select page_template
into   l_template
from   apex_030200.wwv_flow_report_layouts
where flow_id = :app_id
and    report_layout_name = 'pdf_report';
-- Convert CLOB to BLOB
l_request_blob := wwv_flow_utilities.clob_to_blob(l_xml);
-- Call unsupported and undocumented APEX function
l_response :=
    apex_030200.wwv_flow_print_util.convert(
      p_report_data   => l_request_blob,
      p_template      => l_template,
      p_template_type => 'rtf',
      p_output        => 'pdf'
-- Set correct mime type and download response
owa_util.mime_header('application/pdf', false);
htp.p('Content-length: ' || dbms_lob.getlength(l_response));
htp.p('Content-Disposition: attachment; filename="Claim_details.pdf"');
owa_util.http_header_close;
apex_application.g_page_text_generated := true;
apex_application.g_unrecoverable_error := true;
wpg_docload.download_file(l_response);

See, http://www.oracle.com/technetwork/developer-tools/apex/configure-printing-093060.html
http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/otn_install.htm#CBHBJDDE
(excerpt copied here, for you convenience)
7. Enabling Network Services in Oracle Database 11g
By default, the ability to interact with network services is disabled in Oracle Database 11g release 1 (11.1). Therefore, if running Oracle Application Express with Oracle Database 11g release 1 (11.1), use the new DBMS_NETWORK_ACL_ADMIN package to grant connect privileges to any host for the FLOWS_030100 database user. Failing to grant these privileges results in issues with PDF/report printing, specifically, you will get the following error message:
ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.
Follow the steps mentioned in the Oracle Application Express Installation Guide, Enabling Network Services in Oracle Database 11g. Also refer to the troubleshooting section in case you receive an ORA-44416: Invalid ACL error after running the previous script.

REgarding licensing issues involvng 'Computername' and the use of UpperCase4 vs Lowercase Letters

Does any one know if it would cause problems for the Office 365 software license to be displayed as licensed to an ALL CAPS name like 'MY-FAVORITE-PC' but the computer itself shows the computer name to be 'my-favorite-pc"?
If it does, which one should I change? A couple of people here have had this same problem (which usually occurs when they change to using a different PC for their account) I have to Deactivate their Old PC namer and then install the licnse to
their New OC using whatever name it has.
On more than one system, this has resulted in various odd "failure to contact Microsoft server" issues when activating. The problem continues for 7 days and then their copy of Office starts showing reed warning bards and eventually gets totally
unusable.
However, if I uninstall the office, deactivate the license, and reinstall it once again, it install just fine and acts ok but invariably at some point, the same thing occurs.
On one of them I noticed the difference in the case of the letters used in the computer name and the license name. On others I am wondering about various software add ins for Outlook or some other 3rd part application causing the problem. Whatever
it is, it gets extremely annoying. Officer 365 apparently must run an activation sequence almost constantly while Office 2010 (and I presume 2013) ran it once and were done with it.
Searching Google I have found too many possible reasons along with a lot of people who have had the same problems but no one seems to have the 100% solution. This has only started happening since we switched to Office 365 and only
seems to occur on systems that are changed out to different ones with the same User's 365 Account which is in good standing and has 5 available licenses of which only one is in use.
In the case of the caps vs lowercase I also wonder if changing the name to CAPS on their PC would create additional problems on its own?

Hi Questorfla,
For the Office 365 software license issue, I recommend you can post in dedicated Office 365 Forum to get a better response:
http://community.office365.com/en-us/f/148.aspx
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

Please clarify the following license issue

Hello
Please clarify the following license issue
Oracle 10g se license requirement while using a power 6 P520 machine with 2-core 4.2 GHz processor card,4 memory DIMM slots. Are we entitled for paying for one oracle 10g SE license?
many thanks in advance

When you read through that thread, did you see where I linked to and quoted the licensing definitions
Processor: shall be defined as all processors where the Oracle programs are installed and/or running. Programs licensed on a processor basis may be accessed by your internal users (including agents and contractors) and by your third party users. For the purpose of counting the number of processors which require licensing for a Sun UltraSPARC T1 processor with 4, 6 or 8 cores at 1.0 gigahertz or 8 cores at 1.2 gigahertz for only those servers specified on the Sun Server Table which can be accessed at http://oracle.com/contracts , “n” cores shall be determined by multiplying the total number of cores by a factor of .25. For the purposes of counting the number of processors which require licensing for AMD and Intel multicore chips, “n” cores shall be determined by multiplying the total number of cores by a factor of .50. For the purposes of counting the number of processors which require licensing for all hardware platforms not otherwise specified in this section, a multicore chip with "n" cores shall be determined by multiplying "n" cores by a factor of .75. All cores on all multicore chips for each licensed program for each factor listed below are to be aggregated before multiplying by the appropriate factor and all fractions of a number are to be rounded up to the next whole number. When licensing Oracle programs with Standard Edition One or Standard Edition in the product name, a processor is counted equivalent to a socket.
It appears that you fall under the "not otherwise specified" category because you're not dealing with an UltraSPARC T1 (multiplier 0.25) or an AMD/ Intel chip (multiplier 0.5) so your multiplier would be 0.75.
0.75 * 2 cores = 1.5 processors which would have to be rounded up to 2 processors. If you had 4 total cores, you would only need a 3 processor license.
Justin

Sun Ray Windows Connector Terminal Services licenses issue

Hi!
I've installed the latest Sun Ray 4 09/07 as well as the Windows Connector (srwc) recently released on a machine. I've followed the instructions given in the installation guide. But when 'uttsc' is executed I received the following error message.
"No Terminal Services licenses are available"
I have no issue in connecting to other Windows server (say windows-02) only to this particular Windows server (windows-01). Surprisingly, I have no problem 'uttsc'-ing to windows-01 using pre-existing Sun Ray 4. Any idea why and how to resolve this?
Appreciate anyone who responds. Thanks.
Regards,
Jonathan

What Terminal Server license model are you using? And what does Windows Terminal Server License Manger show for number of licenses in use and availble?

9.3.0.1 Permanent Licensing Issue

I am trying to use an old VMware image that contains Planning 9.3.0.1, but I am having licensing issues.
Steps taken already
1) I went to http://licensecodes.oracle.com/downloads/HS9_MasterLicenseFile.zip and download the new license file.
2) Then went to the license manager (LMtools.exe) and was successful starting and stopping the license server and re-reading the license.
3) Then went to the Configuration Utility and Activated the Product to change the Deployment ID to "Temp-0004" within System 9 BI+, Analytical Services, Financial Management and Planning.
Where I see the errors
1) In my debugging of the issue, I tried starting the Hyperion Planning via command line. Planning starts up fine but no longer accepts the requests.
Error Text: "CLS0000017 No unexpired licenses are available for your product. No further requests to the server will be processed."
2) Also within workspace when I go from Navigate -> Application -> Planning -> PlanApp1 I receive the follow error when I try to login.
Error Text: "A problem with Hyperion System 9 Planning license was encountered. Please see the log for details."
Any suggestions?

I'm attaching the instructions I put together about a year ago -- your mileage may vary:
Instructions to update the 9.3 Demo Drives to new license files.
copy HS9_MasterLicenseFile.lic C:\HYSL\common\LicenseServer\Licenses
move C:\HYSL\common\LicenseServer\Licenses\NA_HYSL_Demo_Disk_beckett_01_18_2007_ga.lic C:\HYSL\common\LicenseServer\NA_HYSL_Demo_Disk_beckett_01_18_2007_ga.lic.bak
Copy HS9_SA_MasterLicenseFile.lic C:\HYSL\common\LicenseStandalone\Licenses
move C:\HYSL\common\LicenseStandalone\Licenses\NA_HYSL_Demo_DiskSA_beckett_01_18_2007_as.lic C:\HYSL\common\LicenseStandalone\NA_HYSL_Demo_DiskSA_beckett_01_18_2007_as.lic.bak
Execute the Hyperion System 9 Foundation / Configuration utility
Active the following Products using the default Deployment ID which is *
Hyperion System 9 BI+
Analytic Services
Hyperion System 9 Financial Management
Hyperion System 9 BI+ Enterprise Metrics
Hyperion System 9 Performance Scorecard
Strategic Finance Server
Planning
Verify the DEPLOYMENTID in C:\HYSL\BIPlus\common\config\license.properties
Ensure the DeploymentID matches below exactly.
     #License keys for BI+
     #Wed Feb 13 21:05:27 EST 2008
     licenseServerPath=@demodrive
     DeploymentID=*
     licenseStandalonePath=C\:\\HYSL\\common\\LicenseStandalone\\Licenses
Reboot
Start Planning
Login
If Login provides license error, perform below steps:
1) Run: C:\Program Files\Microsoft SQL Server\80\Tools\Binn\isqlw.exe
2) Connect as Windows Authenticated User
3) In SQL window:
use pln
update HSPSYS_PROPERTIES set PROPERTY_VALUE='*' where PROPERTY_NAME like 'DE%';
4) Highlight the two lines and press F5 to execute the SQL update.
Regards,
-John

SQL Server License from SAP to use the Business Intelligence Stack

Hi Sean,
SQL Server license is a very complicated issue. If the tool is given to you in the package, it should be ok to use it. There is no update for the info provided in the blog although it is over 3 years.
Thanks,
Gordon

Hi delaynomore,
According to your description, you fail to execute the function with timeout error after migration to SQL Server 2012. Based on my research, the issue could be due to the long running tasks or uncommitted transactions.
To troubleshoot the issue, besides Olaf's suggestion to check the connection to SQL Server 2012 instance and the stored procedure using SQL Server Management Studio(SSMS) manually, you could also follow the methods below.
1. Execute that procedure manually using SSMS and check if it takes a very long time to execute and return. For example, there could be millions of rows being updated. If it takes a long time, you can adjust the CommandTimeout accordingly.
2. Execute the following statement in SSMS to check if there are any uncommitted transactions: dbcc opentran ('yourDatabaseName'). If there are any uncommitted transactions, please change the stored procedure accordingly to commit the transactions.
For more information about the process, please refer to the article:
http://blogs.msdn.com/b/spike/archive/2008/07/31/timeout-expired-the-timeout-period-elapsed-prior-to-completion-of-the-operation-or-the-server-is-not-responding.aspx
Regards,
Michelle Li

Windows 2008 R2 RDS Licensing Issue

I have Citrix Presentation Server 4.5 farm (with all of the application servers running Windows 2003) and I have just migrated from using a Windows 2003 server for the terminal services licensing to a Windows 2008 R2 RDS server for the licensing. We have
a number of thin-clients that connect to the Citrix farm and provide a kiosk for users. We have 85 per device licenses however we are only using 15 of those licenses (plans were made but never implemented to use the rest), so we have 70 available licenses.
The licenses are configured per device and as Windows Server 2003 licenses.
After the migration to 2008 R2, the thin-clients connected to the new licensing server without any trouble at all. As I monitored the licenses on the new server, each thin-client was given a temporary license first and then at the
next connection they got a permanent license. All of this I have been able to confirm through the event logs on the server.
However, what I get in the event logs of the new 2008 R2 licensing server an event with event ID 21 that says:
The Remote Desktop license server "ServerName" does not have any remaining permanent Remote Desktop Services client access licenses (RDS CALs) of the type "Windows Server 2003 - TS Per Device CAL". As a result, the Remote Desktop license server cannot issue
RDS CALs of the type "Windows Server 2003 - TS Per Device CAL" to the Remote Desktop Session Host server "vvv.xxx.yyy.zzz". To resolve this problem, verify that the Remote Desktop licensing mode configured on the RD Session Host server matches the type of
RDS CALs installed on the Remote Desktop license server. If required, purchase and install additional RDS CALs as needed for this Remote Desktop license server.
(Note I have removed the server name and IP address due to company policy.) I have confirmed that every server in my Citrix farm has its terminal services configuration set for "per device" licensing and I have also specified the name of the 2008
R2 server rather than allow the servers to automatically find the licensing server. I have confirmed that my 2008 R2 server is configured for "per device" licensing.
The IP addresses I have seen in the event log messages are the IP addresses of a Citrix server rather than one of the thin-clients, and so far every Citrix server we have has appeared in one of these event log messages. I have been able
to determine that this event does not occur when a thin-client is connecting up nor does this event occur when I remotely log into the server.
As I noted above we only have 15 thin-clients using the 85 licenses so we have 70 available licenses for the Citrix servers so why are we out of licenses? What is this message trying to tell me?
Thanks
Brent

Hi Bent,
According the Event ID 21, I think you might have the license connection issues with RDS CALs. I suggest you analyze some relative services and
make sure your network without any misconfiguration.
Hopefully, there is an article describes how to troubleshoot this license issue on the terminal server.
Event ID 21 — Terminal Services Client Access License (TS CAL)
http://technet.microsoft.com/en-US/library/A98D84AC-B824-4F00-BF58-3CFF23493BF9.aspx
By the way, the license of Windows Server 2003 does not support to assign CAL to allow user to access the Windows Server 2008. You should buy a
new Windows Server 2008 license to meet the requirement above if necessary.
Hope this helps.

Any license issue for using Forms 5.0 deploye application?

Hello,
if I using Forms 5.0 to develop an application, then using forms runtime to deploy, have any license issue ?

Assuming that you have a licence for Forms then it depends on how you are deploying it.
If you are deploying the application in Client Server mode then tghere is no runtime licence for Forms.
If you are deploying on the web then you will need a Forms Server licence

Server License Assignment

2 SBS 6.0 Servers both at sp5.
My office has been having intermittent login problems ever since I
recovered from a hard drive crash on one of my servers and had to
re-install Netware on one a new drive.
Logging in produces a variety of results, usually to 2 or three
different users every day or so. Sometimes the login window just keeps
re-appearing after a login until a user reboots. Other times there are
messages like "An unexpected error has occurred" or "Connection to the
server was terminated" usually with an 8819 error code attached, which
points to a licensing issue.
Investigating further I find that the license assigned to the previously
crashed server is not being consumed by that server even though it is
assigned to it. I also note that the installed date is back in 2003.
This seems like the original license rather than the one I thought I had
re-installed earlier this summer.
Thanks,
Scott Schaffer
Scott Schaffer
ITSA
Olive Waller Zinkhan & Waller

Sorry, didn't see your earlier email. I solved the immediate login
problem. Yesterday afternoon I ran an unattended dsrepair. There were 0
errors but it apparently did not unlock the ds when it was finished.
This morning there was a "Cannot update NDS against an entry within
subnet container: DHCP-Subnet" and " Error (-663) occurred while saving
a backup of the NDPS Manager database files" on the our main file
server console screen. The -663 error pointed me to TID 10015560 about
the DS being locked. I followed the suggestion to run dsrepair once and
that unlocked the server and people were again allowed to login. This
server also shows the proper license consumption again.
So I am back to just the one server with no licesne consumption. I have
not yet capture a pm trace when a person logs in and has tree or server
not found. I will see if I can get that to happen today as I cannot
reproduce the login error every time.
Thanks for your patience.
Scott
Scott Schaffer
ITSA
Olive Waller Zinkhan & Waller
>>> Anders Gustafsson<[email protected]> 10/23/08 09:03AM
>>>
Scott Schaffer,
> Over the night all of a sudden my other server is no longer consuming
> it's license either and nobody can login.
>
OK. Is your DS healthy? Licenses are read from DS, so if you have DS
problems, then you will have license problems. As I said earlier: What
does the PM TRACE show when you try logging in?
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Discover the Novell forums at http://forums.novell.com
Novell does not monitor these forums officially.
Enhancement requests for all Novell products may be made at
http://support.novell.com/enhancement

Rhel Versions and Licensing Issue

Post Author: Hexagram16
CA Forum: Deployment
Hi Guys,
As raised previously, this is to seek for assistance on how do we go about our local client licensing. We were about to simulate when we found out that subject is using Linux instead of Windows. This resulted us to requesting a new Media Kit from you which can be used for Linux. However, our client uses RHEL 5 yet the one we have is only RHEL 4. Since still incompatible, we decided to downgrade server from RHEL 5 to 4. Is BOBJ_Linux only supported RHEL4? no patchwork etc? another issue is upon some test simulation, BO license won't run as cross-platform (Windows to Linux).
For your opinions/recommendations
Thanks

Apparently the licensing from Microsoft has changed and I need to report using SCCM 2007 on
228-04437 SQL Server Standard License(s)
395-02412 Exchange Server Enterprise License(s)
5HU-00215 Lync Server License(s)
7JQ-00341 SQL Server Enterprise - 2 Core License(s)
7NQ-00302 SQL Server Standard - 2 Core License(s)
D2M-00366 SQL Server Business Intelligence License(s)
H04-00232 SharePoint Server License(s)
P71-07280 Windows Server Datacenter - 2 Processor License License(s)
P73-05897 Windows Server Standard - 2 Processor License(s)
T6L-00237 System Center Datacenter - 2 Processor License(s)
T9L-00222 System Center Standard - 2 Processor License(s) of MCCA Server Products
I saw the SQL per processor built-in report but not the Operating System One...
I do not see a SCCM report SQL per Core?
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

Weblogic 4.5 license issue

The license file which we used in weblogic 4.5 does not work properly
under firewall. It does work fine if without firewall, five
simultaneous user can connect in. BUT, if under firewall, even one
user will got license issue if he runs for one day or two. We guess
firewall may confused weblogic about the client ip addresses.
Any help or suggestion are highly helpful!!

<WEBLOGIC-LICENSES>
<LICENSE PRODUCT="WebLogic"
IP="any" UNITS="5" EXPIRATION="never"
KEY="d5326244607192d5b8a65abc8b062bde"
/>
<LICENSE PRODUCT="WebLogic/SSL"
IP="any" UNITS="5" EXPIRATION="never"
KEY="2156fec41e8e5df182197356f1683dea"
/>
<LICENSE PRODUCT="jdbcKona/MSSQLServer4"
IP="any" UNITS="5" EXPIRATION="never"
KEY="98595dcca2be251c8b6d5e793d466718"
/>
<LICENSE PRODUCT="jdbcKona/Informix4"
IP="any" UNITS="5" EXPIRATION="never"
KEY="4c82b005d3ac938b07e2bc2f1c2bec1b"
/>
<LICENSE PRODUCT="jdbcKona/Oracle"
IP="any" UNITS="5" EXPIRATION="never"
KEY="2c0ff2fb4c9fa01bbf2c9d34c8c1096a"
/>
<LICENSE PRODUCT="jdbcKona/Sybase"
IP="any" UNITS="5" EXPIRATION="never"
KEY="a5cdbdbf52cde0d51af2f72165a9f94c"
/>
<LICENSE PRODUCT="jdbcKona/MSSQLServer"
IP="any" UNITS="5" EXPIRATION="never"
KEY="0d69039bed111ce43332a90e9a9ba2e6"
/>
</WEBLOGIC-LICENSES>

Hi Michael
The IP address is the first thing that I verified and it is correct. Any
other ideas as to what I might be missing? Thanks.
Chris Morris
YOUcentric, Inc.
[email protected]
Michael Girdley <[email protected]> wrote in message
news:39879048$[email protected]..
>
>
Unfortunately, it appears that your license was created incorrectly. I
assume that your IP address is not 192.168.11.16? Or is it?
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
"Chris Morris" <[email protected]> wrote in message
news:3986eff8$[email protected]..
Hello
I am using Weblogic 4.5.1 on a Sun Solaris 8 box. I was using an XML
license file that has no expiration date but was limited to three users.An
unlimited user license with no expiration date was purchased and I am
attempting to implement the license for this box. When I attempt to runmy
application I get this error message:
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Loaded License : /opt/weblogic/license/WebLogicLicense.xml
However Unable to start because :
License key incorrect for
WebLogic,192.168.11.16,unlimited,never|558be10208d2f2fc6fa3382b23658c6d
As well as the fact that: No License found for Tengah
As well as the fact that: No License found for WebLogic/JDBC
As well as the fact that: No License found for Tengah/JDBC
As well as the fact that: No License found for jdbcKona/T3

Symantec BackUp Exec License Issue

Hey guys,
I have a license issue with Backup Exec. I have the agent licenses as well as the server license for Backup Exec 2014. But the issue is on the next screen. It gives no options to select. Am I missing something??
This topic first appeared in the Spiceworks Community

Hey guys,
I have a license issue with Backup Exec. I have the agent licenses as well as the server license for Backup Exec 2014. But the issue is on the next screen. It gives no options to select. Am I missing something??
This topic first appeared in the Spiceworks Community

Verity server license issue

Similar Messages

Maybe you are looking for