Verizon 4G LTE Router lights flashing at the same time

Just today I noticed that some of the lights on my Verizon 4G LTE Router are all flashing at the same time and in sync. These are the lights that indicate the internet, wifi and LAN network activity. It seems it might have rebooted today as well - perhaps the firmware was updated by Verizon. The firmware running on it now appears to be v3.2.3.55. Its functioning normally right now - its just that having these three lights flash all at the same time, gives the impression that there is an error or issue with the device. Has anyone else noticed anything like this on their router?

I have to report the firmware has messed up our connection. We have 2 of these routers. Both would not connect to the internet for several days. The 4g LTE connection light was blue and the signal strength showed green with occasional blue. The devices would just not connect to the internet. We are 9 miles from the tower but the devices had worked reliably before the firmware upgrade. I have a support NRB (Network Repair Bureau) ticket going with several phone calls. Evidently one of the features of this firmware was a 3G fallback. The support says Verizon will not rollback firmware.updates. There is obviously bugs in this firmware that have negative impacts. One of our Netgear routers has made an internet connection again but the other has not. It's really frustrating especially when you are paying a small fortune for the data. It worked fine before the firmware upgrade. PLEASE fix this Verizon.

Similar Messages

Can I has 2 different version of flash at the same time?

I am using flash MX 2004, now I planning to install CS3 but I
do not want to uninstall MX 2004 because I has some work on it. I
afraid that after I change I cannot open my file.
Can I has 2 flash at the same time?
By the way I had installed flash player 9 from adobe website
but when I publish my swf, I cannot choose player 9 and all the swf
I has is in player 7 format. How can I change it? ( I cannot find
the player 9, I am sure I had installed )

You can have both versions at the same time. You can open MX
2004 files in CS3, as you may know, but not the other way around.
In addition, without Flash 8, you'll not be able to save backwards
to MX 2004 because Flash only saves back one version at a time. So,
you can save back to 8 from CS3, open it in 8 and save back to MX
2004 so long as you didn't have any features in your movie that was
specific to the newer versions.

Sir recd your reply for FaceTime my router is perfect at the.same time my I phone is receving incoming call

Sir recd your reply my router is perfect at the same time my I phone is receving incoming call

Is there a question here?

Can I have my Time Capsule wifi and my Verizon router wifi on at the same time?

I want to have my verizon wifi on at the same time as my time capsules wifi but I don't know if it interfere. There's an app that you can use as a remote for your cable box but you need to be on your routers wifi.
Thanks,
Zach

Suggest that you run a few speed checks on both wireless networks with a computer in same room as the wireless router using a site like www.speedtest.net on your browser.
If you are getting close to your plan speeds, then you likely do not have interference issues.
Most routers will scan to find the best available channel to use, so assuming that your equipment is working OK, things should be OK. Try to keep the Verizon router and Time Capsule at least 6-8 feet, or a few meters from each other.
This assumes that you are not living in a crowded situation like an apartment complex, where intereference is pretty much a fact of life due to the very limited number of wireless channels that are available.

Can't connect to internet via router and airtunes at the same time

Can anyone help me connect to the internet via my BT Homehub, and play AirTunes through my Airport base station at the same time? I can only seem to do one at a time.
I've seen the articles about setting up clients etc but don't get it. Using the Airport Assistant utilty doesn't really help either. Would like someone to go through the steps I need to follow.
Thanks

To set up AirTunes on the AirPort Express Base Station (AX), connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, use the AirPort Admin Utility to check these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- Wireless Mode: Join an Existing Wireless Network (Wireless Client)
- Wireless Network: <select your BT Homehub wireless network>
Music tab
- Enable AirTunes on this base station (checked)
- Enable AirTunes over the Ethernet port (optional)
- iTunes Speaker Name: <whatever you wish>
- iTunes Speaker Password (optional)
In iTunes:
iTunes > Preferences... > Advanced > General
- Look for remote speakers connected with AirTunes (checked)

Can I use BOTH Verizon DSL Wireless AND DISHnet Wireless at the same time?

Waiting for Dishnet contract to die and rot away but about 2 months to go. Want to get with Verison Standard DSL Wireless as no data cap tho slower.
I can just wait till Dishnet dies and keep bumping into data caps with the Dish service OR can I get the DSL setup and use one connex for the iMac and one for the iPad without any conflicts?
I am so ignorant of technology that I see a Swing-a-Way hand crank can opener as a marvel of industrial magic,....so please talk simple words to me, :-)
Thanks
DH

Sign up for the fastest DSL package that you can. Even if the overall speed is slower, the fact that you won't be going over a satellite connection anymore should make the Internet *that* much faster. The Wireless Gateway should come included.
You can use both services at once, although note that determining how you plan to use both at the same time is going to be another story. Some people use Dual WAN routers (as in, routers that accept two Internet connections and can balance between the two). Others will use the connections separately, by moving devices between the two connections as needed.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Wireless Router cuts out at the same time every day.

I'm having an issue with my WRT160N router. I'm noticing that my internet connection cuts out for about 5 minutes every day in between 5:30-7:30 pm. Without fail, every single day, I can count on it going out for about 5 minutes during this time. The desktop, which is wired, remains working during this time. I'm at my wits end here, since I'm an online student, and this is my best time to schedule quizzes and exams.
Any help would be greatly appreciated.
Thanks.

Is your network is secured?
If the network is not secured than put some security on the router or else if the network is already secured then try to increase the security level by WPA or WPA2.
Also change the network name to some unique name.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box.
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key.
NOTE : Passphrase should be more that 8 characters...

Dying shuffle... both lights on at the same time

I got my shuffle a while ago, and recently it's been acting erratically.
I've got an imported album off a CD on it, aswell as some songs from iTunes music store.
Every so often when I'm listening to it, it makes a pop noise and goes dead. Also, both orange and green lights come on for about 10 seconds, half and half.
Afterwards, I can't seem to get it working again for a day or so.
The battery button say's it's fully charged (green light) so it can't be the battery running out.
I use my G4 laptop to charge it/put music on it and the iPod update is the most recent one.
Any suggestions very much appreciated, as warranty runs out very soon!!!
Shuffle Mac OS X (10.4.3)

I get the "pop noise" and then the iPod goes dead. If I hit play it goes back on, but it is in the place of "Stricken" by Disturbed. Listen to songs in order and check what song came before the "Pop". It might be preventing a song there from playing. I have taken the song off my iPod and it stops, but it always comes back when I put it back on.

Whats the green and orange light blinking at the same time?

Since i upgraded to itunes 5.0, i lost my itunes , i can not open it no more, installed it again same thing. Now my Shuffle won't work, when you touch play it will blink the green and orange light. Can not speak with a shuffle agent because 3 months passed. And they want you to nuy an a contract for $59.00 for something that cost $149.00?

Check some of these links out:
http://www.apple.com/support/ipodshuffle/
http://www.apple.com/support/ipodshuffle/reference/
Regards,

Using a Router and Airport at the same time

Hi
I have a problem. I have a wireless setup in my house and I need a faster internet connection for my podcast. Since wireless has 1 Gigabit Ethernet (I think) I need 100 Gigabit Ethernet through a regular Ethernet cable (I think). Can I plug a regular wired router into my internet reciever and then plug my airport base station into the router. Also can I plug an ETHERNET Cable into the router and into my laptop. I need the wireless so my iMac G3 can still acess the internet. Is this all possible?

I have a problem. I have a wireless setup in my house
and I need a faster internet connection for my
podcast.
How fast is your current internet connection, upload and download?
Virtually all internet connections are slow in comparison to network speeds and therefore increasing the speed of the internet network will have a negligible impact on the speed of any internet activity.
Since wireless has 1 Gigabit Ethernet (I
think)
802.11g is only 54 Mbps and nowhere near 1024Mbps of a gigabyte ethernet connections
I need 100 Gigabit Ethernet through a regular
Ethernet cable (I think).
I think you mean 100Mbps ethernet.
Can I plug a regular wired
router into my internet reciever and then plug my
airport base station into the router.
Yes and as stated uncheck distribute IP addresses on the Airport base station, I am presuming you have an Airport Express, as the Airport Extreme Base Station already has the LAN port you would require.
Also can I plug
an ETHERNET Cable into the router and into my laptop.
Yes

Labview runs CANBus and DNP3 software model at the same time

I have an ordinary computer which communicates with several DSPs (CANBus communiation) through Compact Rio. The physical connection is that the DSPs' CANBuses are connected together and connected into Compact Rio, then the Compact Rio is connected with a router through Ethernet, at the same time, the computer also connects with the Router through Ethernet. Based on this physical architecture, the computer can run CANBus software model on Labview to communiate with Compact Rio and DSPs.
As I know, the communication between the computer and the Compact Rio is not real time, and the communication between Compact Rio and DSPs can be real time, can you tell me if I get the right point?
Now we have another device named RTDS (communicate with outside through Enternet based on DNP3), and want to add RTDS into our system. I am not sure about the way to conduct the communiation. The main question is that we need to run Labview to communicate with DSPs through CANBus and RTDS through DNP3 at the same time, is that possible?
I proposed two possible ways to conduct communication, bt not sure if it is possible.
1. I proposed that I connect RTDS with the Router through Ethernet, and then the computer communicates with RTDS through the Router based on DNP3 and also keeps the communication with DSPs through Router, Compact Rio, CANBus and then DSPs. I am wondering if this kind of communication is available for Labview.
2. The second possible way I proposed is that I connect the RTDS with Compat Rio (CRio keeps connecting with DSPs through CANBus) through Ethernet, and then the computer communicates with DSPs through Router, Compact Rio and CANBus, and the computer communicates with RTDS through Router, Compact Rio and Ethernet. Also, the computer needs to run Labview with CANBus sofeware model and DNP3 software model at the same time. I am also not sure if it is possible.
The diagram of the communication system is shown in the attachments.
Attachments:
Commnucation system diagram.pdf ‏118 KB

To use Mail from multiple devices, your Mail Server needs to be using IMAP protocol (iCloud Mail uses that).
IMAP keeps the Master copies on the Server, not on the Mac the way most default POP Mail servers do.
To keep one Master Calendar, accessible from all devices, you need a web-accessible place to keep the Master Calendar. iCloud can do that.
¿Do you see a trend developing here?

Verizon 4G LTE Router

I am looking for a 4G LTE Router that has Gigabit Ethernet wired ports. I found a few so far. So I decided to also take alook at the Verizon 4G LTE Router.
I quickly looked at the user manual for the Verizon 4G LTE Router and it appears it is still using the ancient 10/100 ports. No mention of gigabit anywhere.
Do manufacturers and service providers not realize that people are backing up mammoth amounts of data these days? 10's if not 100's of Gigs.
Network backups require using the wired ports to get enough backup bandwidth and Gigabit ports are an absolute necessity.
This 4G LTE Router looks good otherwise. But totally fails because of using these ancient ethernet ports.

Do you see anywhere where I said I was backing up to the Internet?
This is about using wired ports to enable backups between devices on the wired ports.
If I wanted to spend a lot of money, sure, I could go buy a 4g VZ Cradlepoint for $699.
Or I could buy yet another separate device like a Gigabit Switch to clutter things up.
The point is that gigabit ports cost absolutely peanuts when you're building a device.
And with other manufacturers like Peplink and Cradlepoint putting them into every one of their 4g routers why is Verizon choosing devices without them?

Verizon 4G LTE Router constantly disconnecting and other issues

My Verizon 4G LTE Router constantly disconnects. It requires a power off reset to come back on. Unfortunately, I dumped a perfectly reliable DSL connection for this. Worse yet, it is in a second home, and used to remotely monitor my temperature and security camera. I'm an not there every hour of the day to power cycle this totally unreliable device!
Also,I've had this device for a couple of months now, and have yet to be able to get my security cameras working. Now I can't even tell if my furnace is on - with winter coming if I can't monitor the temperature remotely, my pipes and well pump could be seriously damaged. What is going on with this thing????

Blazey, I appreciate you trying to help.
So, what you are saying is I have a few options:
     1) Do nothing and keep paying for a service and hardware combination I purchased directly from Verizon that doesn't work
     2) Spend $600 on top of what I have already spent to get limping along
     3) Spend $600 + buy another more reliable router that doesn't hang all the time
Where is option #4 - Verizon should fix their problem(s), or release me from my contractual obligation so I can go back to a rock steady DSL connection!
This is totally unacceptable.. I am not trying to use some 3rd party hardware on their network. I purchased this directly from Verizon so I DIDN'T have to worry about it working. They swore to me that this would be a plug in replacement for my DSL. Now after some more reading I discover it is not even close. It does not support port forwarding without shelling out another $500 for a static IP. I can assure you, I did not pay for this with ATT's DSL service. I feel duped and am pretty outraged by this.
What's worse is, I do not have "eye's" on my vacation home almost 300 miles away while this is happening. A little difficult to just "pop" over and reset it - which is what Verizon support suggested I do.

I am trying to stream my music from laptop over airport express to my stereo while being able to use the internet at the same time. I am on a PC and have a Verizon Fios router. Little help?

I think I have tried everything I could find/think of to get this to work. I can connect it to my stereo and stream music fine but the internet won't work. I really just want it to join/or extend so that my internet connection remains intact and I can stream music and surf the web at the same time.
Any help would be appreciated!
Thanks

You would probably want your Express to join the network if an extender isn't required. Reset to factory settings and join the network.
If you do want your Express as an extender run an Ethernet cable between the Express and the Verizon router and set the Express up to be in bridge mode, with the same WiFi network name and password as your Verizon router.

My BB won't turn on the red light flashes and the key's light up

Hi
I have read all posts relating to my problem, but one thing my BB won't do is resgister on my computer. The phone will not turn on, has the red light flashing and the keys light up, but the screen will not come on. I have tried taking the battery out, charging it all night, all the recommended/ideas from this sight, but no joy. I have only had this phone since July last year. I haven't been able to try updating phone etc as it won't register on my or my husbands computer please help
Louise

Hi,
The way you presented it made me think it had just happened.
So you have had the phone since July has it ever worked?
Most likely you are missing some or all of your device OS and you'll need to reload the device.
Because the phone can't generate enough signal you will have to "force detect it". I've attached the link below. If you want to proceed I'll need what version of Device OS and what version of desktop manager software.
Thanks,
Bifocals
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB03295 How to verify which version of BlackBerry smartphone software is installed on the computer using BlackBerry Desktop Software
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Verizon 4G LTE Router lights flashing at the same time

Similar Messages

Maybe you are looking for