Verizon 4G LTE Support

Question

I am looking for any solutions that will allow Mac owners/users access to the Verizon 4G LTE network.
Thank you,

Answer 1

Thanks to one of the Verizon support techs, I was able to fix the WMC604 error.
I take the Pantech modem back and forth between OSX and WXP. OSX always works even when WXP is getting the error.
Sort of the sate of todays technology - it works best on the platform not supported ;^)
Anyway, using ^t in the VZ Access Manager window on WXP should yield a terminal window for the modem. Type at+cgdcont? and return to see the current settings.
When going between OSX and WIndows item 1 above generally gets corrupted. My initial issue had both item 1 and 2 incorrect.
In general to get the above window place the focus on the VZ Access Manger window
From the keyboard type Control+T; the control key and t key together
The above window will appear
In the above window type at+cgdcont? and press return
Your list will most likely not be correct - the list below is correct for me and I assume is the general settings for everyone
Based on my conversation with the VZW tech, the addresses numbers are don't care for this exercise. What is important are items 1 through 4 exactly as shown. Note, you could have nothing to something different on each line and your objective is to make them as shown above.
To correct an incorrect line, this example assumes line 1 is incorrect, type at+=1, "IPV6", "vzwims"
Close VZ Access Manager and remove the modem (most be done independently for each item corrected - not sure why)
Repeat the above for all incorrect lines. Here are the commands for each item
at+=1, "IPV6", "vzwims"
at+=2, "IPV4V6", "vzwadmin"
at+=3, "IPV4V6", "vzwinternet"
at+=4, "IPV4V6", "vzwwapp"
Hope this solves your WMC604 issues...it does for me - every time unfortunately.
Technology...never quite ready for prime time!