Verizon DSL, Westell & Airport Extreme Base Station

Last year I posted a desire to hook up my AEBS and AEX to a Westell wireless network. After much discussion and many suggestions I created a network that worked but was occasionally flaky.
Since that time our family has replaced two old G3 laptops with two new Mac laptops that have poor wifi range, esp. when connecting with the Westell. I'm considering a new setup with the Westell 327W DSL wifi modem/router as a DSL modem only and letting my AEBS and AEX handle all the wifi duties in a WDS network.
I have found instructions on the net for setting up the Westell as "modem only" but with other third party wifi routers (not Apple's). Every instruction seems specific to a particular router and the more I search the more I find "oopsies" where someone left out part of the instructions. The AEBS will also need to be connected to an 8 port switch to handle 2 printers and an older Windows PC.
Has anyone actually set up a Westell 327 as modem only with an Airport Base station? If yes, please post details.
Thanks,
TW

Connect the AEBS (or AirPort Express) to the modem via Ethernet (through the switch or not). If you want the wireless clients on the same subnet as the other devices, configure the AEBS (or AirPort Express) to not distribute IP addresses.
Then use the information in KB 107454, AirPort Extreme and Express: Using WDS to create a network from multiple base stations to connect the other remaining AirPort device wirelessly.

Similar Messages

Airport Extreme Base station cannot connect to Westell C90-36R516-01 DSL modem

Hi,
I just purchased a new Airport Extreme Base station for my 15" Macbook Pro. I set everything up this morning per the docs (all cables are connected properly) but the Airport Extreme is flashing an amber LED, which means it cannot establish communication to the network/Internet.
I'm using an old Westell C90-36R516-01 DSL modem that has been working fine up until now. I've tried switching out the Ethernet cables and different powering on/off combos but nothing appears to work. When I connect the Ethernet cable directly into my laptop, I have to power down the DSL modem, power it back on, and then do several refreshes before I finally get an Internet connection.
I read a previous post about unplugging the modem overnight and then plugging it in the next morning to wipe out the MAC address setting. I will be trying that tonight, but I was wondering if there was anything else I could try in the meantime? Or, is it simply a matter of having to get a newer modem from Verizon because this one is 7-8 years old?
Thanks for any help you can provide.
Solved!
Go to Solution.

Hi Max,
Let's start from the beginning,
The ethernet from the modem should be wired to the Wan port of the Airport...
On page 28 of the users manual it says if the light flashes amber you should unplug the power of the modem, wait a few seconds and power up the modem.
I presume you installed the Airport utility from the disk that came with the Airport?
For more information about the reason the light flashes
Open AirPort Utility, select your base station, and then choose Manual Setup from the Base Station menu. ClickBase Station Status to display information about the flashing light
Here is a link to the Manual CLICK HERE
I was hoping to find out more about the Airport utility to see what's it's capable of doing...

Airport Extreme Base Station as bridge for Westell DSL router

I have searched the forums & internet and for the life of me cannot get my network to work properly! I hope you can help.
Here is the situation (I rent so chances are we will not be moving hardware anywhere):
- Westell (Verizon) DSL wireless router downstairs connected to the internet, 1 iMac via ethernet, and 2 ibooks via Airport cards
- One lonely Powermac G4 upstairs that does not have a wireless card
- One extra Airport Extreme Base Station with firmware version 5.7 installed & connected via ethernet/LAN to the G4
I figured the "easy" thing to do would be to use the AEBS as a wireless bridge to get the G4 online. The network utility has occasionally thought that the G4 was connected to the internet, but the internet didn't work at all when it said that!
I have been configuring the AEBS using my wireless ibook (G3). I "unchecked" distribute IP addresses, and "checked" connect to network via WDS. I used the Westell's MAC address as the main WDS source. Under the "WDS" tab, I said to configure the AEBS as a remote station and the Westell router as the main station, and to allow wireless users to connect.
I have tried using the same Network name for each. WEP/WAP is NOT set up on either modem, so passwords aren't a problem. They are both set to channel 6. I am configuring the TCP/IP settings manually.
When the network names are the same, the internet either stops working, or the computers can't find the AEBS.
I don't understand why the AEBS seems unable to see the DSL network.

Hi,
Well, what I have been able to do is this:
I have a Westell Wireless DSL router, just like the one mentioned here, and just like the one mentioned in the article I made reference to, the one started by Mr. Müller.
As was mentioned in the Mr. Müller article, there are some possibilities that will work. They were submitted by a guy named Duane, from Texas. He gives three alternate possibilities, which he entitled "Solution #1, Solution #2, and Solution #3. He says all three of these alternatives will work, and in reading them over I came to the following conclusions: First, he really knows his stuff, and second, his proposed solutions would probably work.
Based on his comments I decided to take a risk yesterday - I put my older Mac Base Station in a drawer and invested in a new Airport Extreme.
Anyway, I digress...
What I've done is follow Solution #3. And it works! I now have a connection from my laptop to the Airport Extreme base station and the internet. I am typing this message using that connection. All I had to do was disable the wireless connection of the DSL router (using their software, of course), and connect the Airport Extreme, via the LAN Ethernet connector, to the Westel DSL router.
Now, all that remains for me is to extend the range of the base station, using an Airport Express. I haven't had any success with that yet, but I see no reason why I shouldn't get it to work eventually. If you can help me out with that, though, I'd sure appreciate it.
Best regards,
Patrick
Macintosh G5, Powerbook G4 Mac OS X (10.4.7)

Airport Extreme Base Station and DSL modem, IP address Conflict issues

I recently set up DSL service in my apartment. I have ATT yahoo DSL modem, and an Airport extreme base station plugged into it. The network works fine with my Vista PC connected to it, but when I try to connect my macbook to the network I get errors telling me the IP address the macbook wants to use is already in use, and my PC gives me an IP address conflict error.
The internet is fine, and the modem is configured automatically, so I think it must be a problem with the way the network is set up or the network settings on my macbook...
any ideas?

All,
I recently posted what I believe to be a similar/identical issue. See my post here: http://discussions.apple.com/thread.jspa?threadID=1378849
I have not changed my AEBS to "Off (Bridge Mode)" yet, because everything currently 'works' but I continue to get the occasional "Double NAT" warning suggesting I switch the AEBS to bridge mode. When this happens, I lose connection to the internet and need to unplugged both the AEBS and my modem to re-establish a connection to the internet and the external HD I have connected to the AEBS.
My question for Jmiller1138, do you continue to get the "Double NAT" warning even when you changed your AEBS to "Off (Bridge Mode)"? I am hesitant to change my AEBS to bridge mode since I'm assuming I'll need to totally reconfigure my entire network (meaning both the AirPort Extremes, my wireless HP printer, and my firewalls on my PCs).
The ignoring of the warning (i.e. closing the AirPort Utility without updating the AEBS) is what triggers the need to reset my AEBS and modem. Not fun.
I guess I'll just need to bite the bullet and set the AEBS to bridge mode . . . yes?

Wireless connection airport extreme base station to dsl modem

Attempting to set up a home network through an old Airport Extreme Base Station. My old DSL modem (AT&T's 2 Wire Gateway) has one enthernet port that is taken up, and I want to know if there is a way to connect the DSL modem wirelessly to the AEBS. I have a laptop PC, my wife has a MacBook, and a Mac Mini is connected to the HDTV. Currently, the AEBS is only connected to a printer, and all computers can connect to it fine. Want to home netweork for back up files, and to share movies, music and vidoes. Just want to work with the equipment I have and not buy a new modem.

Sorry, but no. You will not be able to connect the AEBS by wireless to the DSL wireless gateway to get the results you are looking for. Instead, you could either connect it directly to the gateway's Ethernet port, and then, connect whatever was connected to the gateway to the AEBS instead, OR connect an Ethernet switch to the Gateway, and in turn, connect the AEBS to the switch.

Airport Extreme base station no longer playing nice with Mac Pro

This is a strange problem...
I have an Airport Extreme base station (purchased in 2004) that I use with verizon DSL to get a wireless network going in my house, and I connect three computers wirelessly.
I have an ipod touch and toshiba PC laptop that are both able to connect to the network and run just fine. But lately (past 2 weeks or so) when I try to connect with my MacPro desktop I can go to a few sites, but after a few minutes the airport locks up. At that point none of my computers will connect and I have to unplug and then replug the airport. At that point the network will start up again and if I do not try to get on with Mac Pro then things run fine, but when I try to connect with desktop again, after another few minutes the same thing happens.
I know the problem is with the airport and my Mac Pro - I have done numerous connection experiments and have narrowed the problem down to that.
Is it possible that my MacPro might be drawing more power and causing the airport to overheat? (it is rather hot in the room with DSL connection)
Or should I accept that the current base it old, and bite the bullet and get a new base?
Any thoughts?

Could you post what you did in order to resolve the issue. I'm having a problem with the base station in that I cannot connect to the internet with my laptops (a mac and pc) while I can connect wirelessly to my network with my desktop (G4). The base station is not detected in the base statin admin utility or the aiport setup utility. If anyone else has a solution I would be much obliged to read it.
Thanks!

Airport Extreme Base Station - I am ready to throw this thing...

Dear All,
I'm about ready to throw this thing out the window, along w/ everything else from Apple I own... Sorry, at my wits-end and have finally had it with this thing.
My g/f and I live in an apt with an Airport Extreme Base Station (AEBS), 10/100baseT Switch, Xbox 360, PC clone tower (PowerSpec), and two Centrino Laptops... The topology our network is the following
DSL == Modem => AEBS => 10/100 Switch => (XBox 360, Powerspec)
Every other day, the AEBS drops out for no obvious reason. Not only for no reason, it DROPS the connection and causes interference on our wired network. If I'm playing Call of Duty 2, for instance, and using Skype at the same time, anywhere from 10-30min later, the WiFi connection will drop altogether and the wired network will go down too.
I've done multiple hard-resets and the issue persists. Apple wants $80 to talk to me (after we paid $150 for it because it's supposedly "the best") after only owning it for a little over a year. It seems that this problem has been persistent.
My g/f finally cracked down and bought a Verizon EVDO card and uses it while she is out, but in the house because she cannot use our home network reliably.
I've tried using it on WPA2, WEP, and even left it open but the thing still drops for no reason...sometimes within hours, or two two days. I'll come home, boot up my laptop, and the WiFi is completely gone...non-existant. Boot hers, same thing... I doubt it's interference because we have 1 cordless phone and it's a 900mhz, which we rarely use anyway.
Does anyone else have any of the problem(s) we're having? This has been semi-often since we got it, and all Apple told us was "interference" and won't help us because we use PC (I used to own a Mac, hence why I got this).

Update: Well, the AEBS 'bombed' out again when I got home on Friday, no access whatsoever.
I unplugged my DSL modem from it, plugged it in directly to my HP notebook, and was surfing the 'net w/out a problem. Power cycled the AEBS and it worked fine. That was just over one day on firmware v5.5.1, longer than it lasted on v5.7.
Here's my conclusion...
I'm 'convinced' that v5.7 is buggy and it's known, or well documented. It will cost more money to fix it, or release a new firmware version that repairs the bugs from v5.7, than to just leave it alone and hope people either downgrade to v5.5.1 or purchase a new AEBS (w/ 802.11n).
After countless hours of dealing w/ this, of which I feel like a complete and utter fool, I went out and bought a competitor's product (Linksys) and installed it on Saturday morning. As of this writing, I've had no drop-outs and the access seems to be more punctual, or responsive than when I was accessing under my AEBS. Therefore, I'm happy to say my problem of unreliable WiFi access in my apt is solved, but only after spending $50 to purchase a new router.
I spent $180 on the AEBS and I can remember the first time I had to call AppleCare about printing issues I was having with it; I could print from Windows XP (both wired and wireless), but not from Tiger OSX 10.4. No-one had a clue, but was only told that the issue was my "printer" not the AEBS or my Mac. Despite repeated attempts to re-inform that it works just fine under Windows XP with both my Lexmark and Canon inkjets, it would not print properly (bombed out half/way through the page) under Mac OSX.
So, here on my shelf, sits the Airport Extreme Base Station that I paid $180 for, and it is basically useless. Apple could care less about it, but then again, why should they--after all, it had a 1 year warranty and despite trying to resolve issues I had w/ it while it was in fact within the warranty period, that time has come and gone.

Airport Extreme Base Station Portscanning my System?

Bought the AEBS today and got it set-up in about five minutes; very nice. I then moved on to another (and completely different) problem, which involved opening system.log. What I discovered thousands of messages that read along the lines of:
"Aug 3 17:13:13 My-Computer kernel[0]: Stealth Mode connection attempt to UDP xx.xx.xx.3:51539 from xx.xx.xx.1:192"
where xx.xx.xx.3 is my G5 and xx.xx.xx.1 is the AEBS. I don't know which port number the AEBS started with (hopefully not 1), but it is clearly incrementing by one.
I was able to learn that 192 is used by the base station for PPP status or discovery, but could not find anything more. (If it is of help, I'm connected to the net via Verizon and a DSL modem. I set up the AEBS using the wizard, which defaulted to PPP over Ethernet.) My questions are:
- What exactly is it doing?
- Will it stop once it gets through the full range of port numbers?
- Can I make it stop? (I realize it's not really hurting anything, but it certainly seems like bad behavior to me.)
- Will it do this each time I boot my system?
Any other information is appreciated.
Thanks,
David
iMac G5 Mac OS X (10.4.7)

Will the airport extreme base station work with WD my cloud 3 tb drive?
Yes it should work with your AirPort Extreme base station.
Would I connect it to the airport extreme or could I connect it to my imac ethernet connection.
You'll want to connect it to one of the available LAN (opposing arrows) ports on the AirPort Extreme.

Certain web address not available when using Airport Extreme Base Station

Hello. To access my "secure" account at the local library, I must use a web address that contains a colon followed by a number. I believe that this is a port number, but I confess that all the discussions here regarding ports are going well over my head, and I may be incorrect with this assumption.
My problem is that while I CAN access this site by connecting to my DSL router directly via ethernet cable from my iMac G5, I cannot access the site when connecting to the internet in the mode: iMac Airport to Airport Extreme Base Station to DSL router via ethernet.
The format of the web address is: http://xxxx.yyyy.net:####/zzzzz/, where #### is the number I guess may be specifying a port and causing my problem.
Can anyone advise me, in simple terms, how to get to this address when in the Airport--internet connection mode? Will the solution have any adverse side effects?
Regards and Thanks
iMac G5, 2.5 year old AEBS Mac OS X (10.3.9) Westell 327W 4-port DSL Modem, not using wireless feature.

Very likely the embedded firewall that comes with your AirPort blocks the port you are trying to use.
In order to solve this, best way is to modify the AirPort settings (open the AirPort maintenance app):
Click at the tab "port forwarding" and add the desired port as "public port" to the list. "private IP" is the IP of your Mac and for "private port" type in the port number again.
If you are unsure about the IP of your Mac, look at the network maintenance application.
Well, one side-effect is that you have an open port in your configuration which could cause security issues... but only if you are paranoid So there is nothing to care about (note that without the AirPort inbetween your Mac and your modem, this port would be not blocked and freely accessible

Setting up airport extreme base station with Mac and PC

I have an '02 iBook with an airport card installed and an airport extreme base station. my roommate has a PC and has the DSL connection in her room. i want to wirelessly network my iBook via the airport base. how do i do this? (my base was given to me without any manuals/disks etc)

Your Netgear wireless router is your network's base station. Your parent's PC will not be "serving as a base station" - its presence on the network isn't at all relevant to what you want to do.
To connect your G5 to the Netgear wireless router's network - click on your Mac's Airport menu, click on the name of your Netgear wireless router's network (it will appear in the list when you click on the Airport menu), and enter the wireless network password (if applicable) when prompted by the MacOS. That's is - you are connected!

2 airport extreme base stations later and still no internet connection-

Sorry - yet another beginner with internet connection troubles! (I have read all the posts I could find relating, but without any help).
I have had a Demon broadband account now for about a month (I’m in the UK) and in that time I have purchased a D-Link DSL-300T Ethernet modem and an Airport Extreme Base Station. I got wireless internet working relatively easily – with a powerful range over the whole house and garden, but then one Sunday night, the internet connection via the base station suddenly ‘died’.
I spent the following 3 days scrutinising all of my settings of both the Modem and the Base station, re-setting both, and bought new Ethernet cables / micro filters etc but with no luck. (I’ll point out at this stage that my broadband account is still active, and if I connect the Ethernet modem directly to my iBook [wired] I can still get my broadband connection. Alternatively, I tried daisy chaining the modem to the base station and then via an Ethernet cable to an iBook, but no connection could be made).
When wireless, Airport Admin recognises there is a modem there, and under preferences > network under Airport it states I am connected to the internet – but I’m not.
I then phoned D-Link and they confirmed my firmware was up-to-date for use with Apple products and talked me through all of the modem settings and tweaked a few things, but there was still no connection to the base station. I then phoned Apple. They were incredibly helpful (as ever) and after 35 min. came to the conclusion the base station might not be re-setting itself properly. The replacement one came yesterday, and again I spent a number of hours trying to get it connected to the internet, but there is still no internet connection via airport and I can confirm this from both my eMac and iBook.
Reading through the forums on here, I understand that my particular modem is problematic with the base station, but I can’t work out why it use to work and now it doesn’t! One theory I have investigated is that the firmware of the base station is two advance for the modem following an update, but after reinstalling the original firmware I started with, I still have no luck.
- The eMac is running 10.3.9 / iBook is running 10.4.3. The base station is reinstalled with the latest firmware via system update. The first base station and the modem were delivered to me 31/10/05.
Any help or suggestions would be really appreciated if anyone has any ideas
Thanks for your time
Will.
UK.

http://discussions.apple.com/thread.jspa?threadID=2316
78&tstart=0
I think if you follow the instructions I gave in this
link you will be fine.
Remember, If you for any reason loose your
connection, it is normally always a Power Issue..Your
ISP is down for service ..or some other anomoly, If
you were good before your settings will still be
good...Good Luck...Don
Hi Don,
Thanks for you quick response. I printed off the instructions you posted on the support forum before, and ran through your procedue exactly, (twice) but I'm sorry to inform you that I haven't been able to re-establish my wireless internet connection. Would it be safe for me to assume at this stage that my modem is indeed fualty? It contines to work fine independantly, (I'm using it right now) but it can't seem to make contact with the basestation.
Will.

Airport Extreme Base Station and 2wire Modem / Router

I have Yahoo DSL with a 2wire modem / wireless router combo. I have an iMac and a MacBook both running Leopard. I can't seem to get the Back to my Mac feature to work. I'm currently running the trial version of .Mac. I'd like to get a full .Mac account but I want to be sure I can utilize the Back to my Mac feature. If I were to bridge an Airport Extreme Base Station to the 2wire would that solve my issue with Back to my Mac. Additionally I like the idea of being able to plug a printer of external hard drive into the Airport Extreme.
Any advice is greatly appreciated.

I got it to work. I purchased the Airport Extreme Base Station and took the following steps which I found here http://forums.macosxhints.com/archive/index.php/t-68141.html
First connect directly to the 2Wire with the Ethernet cable.
Instructions from 2Wire:
1. Clear the HomePortal to Factory State –can be accomplished two ways
2. Go to http://homeportal/management
3. Click on Resets
4. Click on Reset to Factory State
5. Click Continue
6. Have customer press Hardware Reset button with paperclip (HG products only and BellSouth HWs)
7. Have customer unbend a paperclip
8. Have customer insert paperclip into recess for Hardware Reset button (outlined with Red circle) on back of HomePortal.
9. Hold paper clip in for ten (10) full seconds
Next steps:
1. Go to http://homeportal/management again
2. Click on Configure under Broadband Link
3. Enter VPI 0 and VCI 35
4. Click on Disable PVC Search
5. Set Connection Type to Direct IP
6. Click Submit/Save
7. Have cu go to http://homeportal/management
8. Click on Configure Services
9. Have cu Uncheck Enable Routing
10. Click Submit
Airport configuration:
1. Open the AirPort Admin Utility and select your Base Station.
2. Click Configure and enter your password.
3. Click the Internet tab.
4. Choose PPP over Ethernet (PPPoE) from the Connect using pop-up menu.
5. If required by your ISP, enter your user name, password and service name in the appropriate fields. ( Your name and password is you full email including the @sbcglobal.net part and your email password)
6. Click Update.
7. After the base station restarts itself, quit the AirPort Admin Utility.
If that doesn’t work call apple and they should be able to help with the airport configuration.
Back to My Mac now works. Hope this helps someone else.
Message was edited by: WalrusBoy

Networking with AirPort Extreme Base Station

I am connected to the Internet with an SBC dsl modem, which I have had for a couple of years with few problems. However, I have been having issues networking my Mac G5, 1.8 Mhz machine since I purchased it some time ago.
In the beginning (before the Mac or -- BM as I like to call it) I was using a D-Link DI-614+ router and running a desktop PC and a laptop PC wirelessly with success. Then I bought my Mac (which I dearly love) and introduced it into my wireless network. At first it seemed to work OK. Gradually and occassionally it would lock up while trying to access an Internet site. Often the problem was resolved by rebooting the DSL modem, the D-Link router and all the computers. This would give me up to several days with no problems, but then things would rapidly deteriorate and I would have connection problems again.
I thought that if I bought an Airport Extreme base station, that would solve the problems but again, at first things were fine, then rapidly went downhill. I have worked exensively with SBC dsl techs and we have determined that the problem is not with the SBC network or with their dsl modem.
As it stands now I only get a maximum of a couple of hours of time before the slowing down of the network begins. Some of the error messages I get seem to indicate that there is a problem with the distribution of IP addresses. TCP/IP is set to use DHCP, and I connect by setting PPPoE to my SBC connections settings. "Connect using PPPoE" is unchecked. Location is currently "Automatic" although I have used the connection assistant a number of times in an attempt to get the system up and running.
I have the same problems in interconnecting the Mac with the two PCs that are on my system. In fact this is even more erratic than connecting to the Internet.
I have spent many hours with my limited knowledge of these things trying to resolve these issues but have had no success. I have scoured .Mac and other Internet sources and cannot find any specific solution to this problem. I am at a real loss as to where to go next. I am hoping someone here can help or point me in a direction where I might find a solution.
Thanks,
Don
Power Mac G5 Mac OS X (10.4.7)

Thank you very much for your response. Yes, the Mac is set to use PPPoE and the SBC information is stored there.
Just to clean things up, I removed the PPPoE configuration on the Mac and left it unchecked.
Here is other information about how the system is set up.
Note: + means item is checked, - means item is unchecked
Apple Base Station V5.7
WAN Ethernet Port: Automatic (Default)
+Enable SNMP Access
+Enable Remote Configuration
-Enable Default Host at
+Enable Remote Printer Access
-Enable NAT Port Mapping Protocol
Internet:
Connect Using: PPP over Ethernet (PPPoE)
+always stay connected
Network:
+Distribute IP addresses
Airport client computers:
+Share a single IP address (using DHCP and NAT)
((Use 10.0.1.1 addressing))
Power Mac G5 Mac OS X (10.4.7)

Airport Extreme base station vs. Linksys router

Hi all -- I have a tech choice to make and I'm soliciting advice and war stories from those who have been in my place.
I have a DSL connection, G5 Mac and a Windows laptop. I've been connecting to the Internet via a Linksys WRT54G router -- the Mac is connected to the router via Ethernet, and the Windows machine connects wirelessly -- and I've been happy with this setup. I have it on good authority that I'll be getting an Airport Express in my stocking this year; I had done a little research and found that it is possible to make the WRT54G and the Airport Express work together, and was planning on doing some hacking and fiddling to make that happen in the new year.
However, last night my WRT54G seems to have died a horrible death -- all its lights started blinking at once, the Internet connection went away, then all the lights went out except for the "diagnostic" light, and now no lights come on at all. No idea what happened, but it seems pretty kaput.
So! I'm in need of a new wireless base station. I could get an Airport Extreme base station, or I could get another Linksys (or another off-the-shelf 802.11 router, but we'll just use "Linksys" as the catch-all phrase here to mean "not an Airport Extreme base station"). The most obvious difference is price -- the Airport Extreme station is $200, while the Linksys is more like $65. Another thing that irks me about the AE station is that it only has one LAN port. I do like being able to plug in my laptop to the wired network to do some diagnostics once in a while and it'd be a pain to have to disconnect my Mac to do so. And then there's nagging worries that the AE base station might not work as well with my Windows laptop.
On the other hand, I'm sure that setting up the Airport Express would be much, much easier with the AE base station. And I do like the idea of the base station being able to dial up if my DSL goes down (as it does from time to time). Basically, I am tempted by the AE base station feature-wise, but I'm kind of balking at paying three times the price and not getting even a second LAN port. Any advice, particularly from people who have used both types of routers in a mixed network, would be appreciated.

Replace your Linksys with another WRT54G. Then you can hook up your anticipated AX as either a client (connected like a computer), a wireless access point (connected using ethernet with DHCP disabled on the AX), or using WDS:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=607414

Connect AirPort Extreme Base Station to air card

How do you connect AirPort Extreme Base Station to Verizon Air Card?

Sorry, but the Air Card cannot be used with the USB port on the AirPort Extreme because that port will only work with a hard drive and/or a printer.
Suggest that you check with Verizon to see if they have an adapter or wireless router for the Air Card that will provide an Ethernet signal to the AirPort Extreme.

Verizon DSL, Westell & Airport Extreme Base Station

Similar Messages

Maybe you are looking for