Verizon Error Message when Calling out?

Whenever I call out to a select few numbers, I get an error message that says "We could not complete your call at this time. Announcement 3 switch 20-1"
Does anyone know what this means?

Let's ensure you're able to fully utilize your device, iyjhao! Are you in the Verizon Wireless coverage area when your looking to make these calls? What zip code are you located in? Are the numbers you're reaching out to able to make and receive calls?
YosefT_VZW
Follow us on Twitter @VZWSupport

Similar Messages

Error message when calling out on IPhone 4S

When we dial out using our Iphone 4S phones, we get a message that says "Please re-enter the 10 digit number you are calling. Do not press send, *67 or *82 cannot be used to block Caller ID. This is happening with all 4 of our Iphone 4S's. I have the Iphone 5S on the same plan and it is not doing this. Once the message plays you can re-enter the phone number that you are trying to call and the call works. But its very annoying to have to dial the number twice. Has anyone ever had this happen?

I completely understand the need of reliable service, Gabynlopez! In review of the coverage area at 42732, it appears that this is a 4G extended area. LTE service is not guaranteed in this area. Since you have a 4G/LTE device, the *228 function will not work.
Lets try this. Go to settings > general > disable LTE. Your device should work with the 3G network in this area.
You may also try settings > general > reset > reset network settings.
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport

Error messages when calling RSDRI_INFOPROV_READ for more than one time

Hello all,
I need to write a cube, however, before I do this I need to check whether there are already data in the target cube for a certain accounting period. This I do by reading the cube via FM RSDRI_INFOPROV_READ. The following coding is called from a running program after pushing a button on the screen.
<i>* clear internal tables.
      CLEAR gt_range.
      CLEAR gt_sfc.
*fill internal tables
      CLEAR ls_sfc.
      ls_sfc-chanm    = '0FISCPER'.
      ls_sfc-chaalias = '0FISCPER'.
      ls_sfc-orderby = 0.
      INSERT ls_sfc INTO TABLE gt_sfc.
      CLEAR ls_range.
      ls_range-chanm    = '0FISCPER'.
      ls_range-sign     = rs_c_range_sign-including.
      ls_range-compop   = rs_c_range_opt-equal.
      ls_range-low      = '2007001'.
      APPEND ls_range TO gt_range.
here I do not know what exactly to do with this flag
      lf_first_call = abap_true.
      CALL FUNCTION 'RSDRI_INFOPROV_READ'
        EXPORTING
          i_infoprov             = 'T01'
          i_th_sfc               = gt_sfc
          i_th_sfk               = gt_sfk
          i_t_range              = gt_range
          i_packagesize          = 1
        IMPORTING
          e_t_data               = lt_rd_cube
          e_end_of_data          = lf_eod
        CHANGING
          c_first_call           = lf_first_call
        EXCEPTIONS
          illegal_input          = 1
          illegal_input_sfc      = 2
          illegal_input_sfk      = 3
          illegal_input_range    = 4
          illegal_input_tablesel = 5
          no_authorization       = 6
          illegal_download       = 7
          illegal_tablename      = 8
          trans_no_write_mode    = 9
          inherited_error        = 10
          x_message              = 11
          OTHERS                 = 12.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      lf_eod = abap_false.
      IF NOT lt_rd_cube IS INITIAL.
        RAISE target_data_found.
        EXIT.
      ENDIF.</i>
When testing with a period for which data already exists, it runs through quite perfectly. The return table is filled and I know that data exists and I EXIT.
However, if I press the button again (program is still running) I get an error message 'Nested call of RSDRI_INFOPROV_READ'. And this for each time I press the button.
So I thought I should clear the flag lf_first_call. After having done so I get an error message 'SQL Error'. Funny is that I get this error only every second time the Function Module is processed. Every other time it works perfectly.
How can I get rid of those error messages?
PLEASE - can anybody help me?
Many thanks in advance,
Thomas

Hi,
you have something like:
end_of_data = ' '.
first_call = 'X'.
WHILE end_of_data = ' '.
        CALL FUNCTION 'RSDRI_INFOPROV_READ'
          EXPORTING i_infoprov             = ....
                     i_th_sfc               = ...
                     i_th_sfk               = ...
                     i_t_range              = ...
                     i_reference_date       = ...
                     i_save_in_table        = ....
                     i_save_in_file         = ....
                     I_USE_DB_AGGREGATION   = ...
                     i_packagesize          = 100000
                     i_authority_check      = ...
          IMPORTING e_t_data               = .....
                     e_end_of_data          = end_of_data
          CHANGING   c_first_call           = first_call
          EXCEPTIONS illegal_input          = 1
                     illegal_input_sfc      = 2
                     illegal_input_sfk      = 3
                     illegal_input_range    = 4
                     illegal_input_tablesel = 5
                     no_authorization       = 6
                     ncum_not_supported     = 7
                     illegal_download       = 8
                     illegal_tablename      = 9
                     OTHERS                 = 11.
ENDWHILE.
hope this helps...
Olivier.

How can I get error message when calling pl/sql

Hi,
I call a pl/sql java wrapper generated by Rosetta.
public static void startWf(
OracleConnection _connection,
BigDecimal p_goal_header_id,
BigDecimal p_submiter_userid,
String p_commit,
String p_init_msg_list,
String [] x_return_status,
BigDecimal [] x_msg_count,
String [] x_msg_data
) throws SQLException
the pl/sql is written by the standard way of OAF backend,
PROCEDURE start_wf ( p_goal_header_id in number
          ,p_submiter_userid     in number
,p_commit in varchar2 DEFAULT FND_API.G_TRUE
          ,p_init_msg_list in varchar2 DEFAULT FND_API.G_FALSE
,x_return_status out varchar2
,x_msg_count out number
,x_msg_data out varchar2);
when running this procedure in TOAD, in case of error, following script can print error message:
if l_return_status <> 'S' then
dbms_output.put_line('Result');
dbms_output.put_line('status: '||l_return_status);
dbms_output.put_line('error count: '||l_msg_count);
dbms_output.put_line('Loop Error');
dbms_output.put_line('Err: '||fnd_msg_pub.get(-1,p_encoded=>'F'));
for i in 2..l_msg_count loop
dbms_output.put_line('Err: '||fnd_msg_pub.get(p_encoded=>'F'));
end loop;
end if;
if l_return_status = 'S' then
dbms_output.put_line('Success');
end if;
end;
My question is when calling pl/sql java wrapper from Java, in case of Error, return_status="E", then in order to get exact error msg, is there any equivalent java method such as get error from pageContext or OADBTransaciton.. etc instead of calling again pl/sql fnd_msg_pub.get to get error msg?
thanks
Lei

Lei,
You can use
checkErrors(OADBTransaction pTx,
int pMessageCount,
String pReturnStatus,
String pMessageData)
method in OAExceptionUtils Class.For details look at javadoc of OAExceptionUtils Class.
--Mukul

Error message when calling a Business Connector RFC destination from SRM

Hello all,
We are facing one problem with data Purchase Order transmission between SRM 5.0 (SRM_SERVER 5.5, extended classic scenario) and Business Connector 4.7.
We made needed customizing in order to have "XML / XI" output medium available in tab 'Company Data' in "Manage Business Partners" web transaction (by updating BBP_USE_AI table in SM30 transaction).
Then, we implemented BAdI definition BBP_EBPXML_OUT_BADI with method PURCHASEORDER in order to change XI system type to Business Connector.
In this way, PO transfer data between SRM and BC is done using BC Module Function BAPI_POEC_XML_SEND (TCP/IP RFC connection was defined for Purchase Order in BBPC_RFCDEST table).
Nevertheless, even if method BBP_PO_SEND_XML is correctly triggered when PO is created with a vendor with XML output medium, we have in the document output log ("Process Purchase Order" web transaction) an error message:
' Error (Unknown Partner and Message Type. Routing Rule created. Sender: SMR Receiver:) when calling RFC destination BC '
where SRM is the SRM log. sys. and BC the Business Connector log. sys.
Our EAI team is working on it, but if you have any idea, your are welcome !
Thank you in advance.
Regards.
Laurent

Hello Christian,
Thank you for your help. However, we abandoned this solution between SRM and Business Connector.
So, we followed instructions indicated in OSS note 883693 - "ECS: PO output determination in R/3".
Nevertheless, in order to restrict this behaviour for specific vendors and purchasing organizations, we added some filters.
It is working fine.
However, when the PO is modified in SRM, then order again, PO is modified in R/3 (by the RFC user from SRM) more than once.
As a consequence, we have as much messages as modifications of the order in R/3 (due to multiple RFC access with the SRM RFC user).
Does anybody have an idea to have only one R/3 output message when the PO is modified in SRM ?
One solution could be to check in the NAST table if the time creation of the last output message is lower than, for example, one minute.
If it is the case, we do not allow R/3 ouput message.
Any suggestions is welcome.
Regards.
Laurent.

How to track error message when calling Transaction: va02

Hi all,
    As we all know, when we change an order through T-Code: VA02, system will update modified data to corresponding database. Meanwhile, if our operate is not legal or incorrect on T-code: VA02, system will call corresponding error messages to us.
    Now I want to know:
   1. how to track the error messages
   2. Is there any Tcode such as: SM21 that we can see the message logs after our operation?
Thanks.

Hi ,
message table for call transaction
DATA: BEGIN OF G_T_MSG OCCURS 0.
        INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF G_T_MSG.
Exucute transaction via Call Transaction
CALL TRANSACTION 'FB01'
                 USING g_t_bdcdata
                 MODE g_l_mode
                 UPDATE 'S'
                 MESSAGES INTO g_t_msg          .
errors will be stpored in the table g_t_msg ..
Thanks .

"out of memory error" message when not out of memory

I've gotten this message before (as have others) when I'm clearly not out of memory. It's been about a year since this happened last, and I can't remember how I solved it. It seems many others have had this problem and that there has been no simple solution. It occured when I was trying to revise some titles over an imported .mov image which was downloaded from the internet. I revised the titles, but they wouldn't render. Then I got the "out of memory" error message. So far I have:
1) Logged out and logged back in
2) Rebooted
3) Pasted my sequence into a new sequence
4) Saved the project as a new project
None of these things have worked. Of course this all happens when I'm at the very end of the project with a deadline of tomorrow.

I'm having the same problem. I searched "out of memory" and found this solution on another thread..
http://discussions.apple.com/thread.jspa?messageID=1162802&#1162802
However, it didn't help me and I am still looking for an answer. I am running FCP HD 4.5 and Avid Express Pro. I edidted together an 18 min video w music, no effects and exported it as a reference movie. Imported to FCP to add chapter markers and that's when I get the "General Error Out of Memory" Tried the make clip offline thing, but that didn't work. Tried exporting a different video from Avid, 3 min and that worked (with chapter marks).
Anyway, I feel your pain. If you find a solution, please mark this thread "question answered"
Thanks
Quicksilver 867 Mac OS X (10.3.9) 1.12 GB SDRAM, 80 gig + 160 gig

Keep getting error message when trying out a small java program in terminal

I've been trying out running java programs in mac os x terminal. I have eclipse as well, but it's too much for me right now. I copied some programs out of the dummies book I have, just to get a feel for things -- so, I went to the desktop where the program was, and compiled it (I saved it with a .java extension). "javac javaprogram.java" to compile, which it did fine, and then 'java javaprogram' to execute it. It's just a simple line that says 'you'll love java!'. Anyway, it wouldn't execute it.
Here's the program (written in text edit):
class Displayer {
     public static void main (String args []) {
          System.out.println ("You'll love Java!");
I got these messages:
Exception in thread "main" java.lang.NoClassDefFoundError: javaprogram
Caused by: java.lang.ClassNotFoundException: javaprogram
     at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:316)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:288)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:374)
Now, I noticed that the first part of the error is "java.lang.NoClassDefFoundError: javaprogram". When I tried to run the program, it 'created' or put something on the desktop called Displayer.class, so I'm not sure what's going on. I've compared what I entered to what's in the book, and there are no mistakes on my part.
Can anyone tell me what I'm doing wrong, and is there any book or site I can go to which will instruct me on running programs in terminal?

For starters, rename javaprogram.java to Displayer.java and dojavac Displayer.java
java Displayerand since you are new to Java, change your source code to public class Displayer.
In Java, files containing a Java class named "ClassName" should/have to be named "ClassName.java".

Getting error message when calling the sub templates

Hi,
I developed an RTF template which contains a cross tab report. There is also a logo and
many other fields above and below the cross tab. If the cross tab output goes to the next page dynamically then the other fields, present above and below the cross tab, should also be displayed. So i kept the fields above the cross tab report as header and the fields below the cross tab as footer using <?start:body?> and <?end body?>. When i preview the RTF then am getting the desired output with headers and footers repeating in all the pages.
If i call this RTF from another main template(import RTF) then am getting error java.lang.NullPointerException.
If i change <?start:body?> and <?end body?> to <?body-start?> and <?body-end?> then am getting the output. But the header and footer is printed in 1st page only and not printed from 2nd page.
Can anyone please suggest how to display the headers and footers in all pages.
Thanks,
Subba Reddy

Hi,
Thanks for ur replay. I also tried creating header and footer and called from the template(summary.RTF). If i preview the template then it is working fine. Headers and footers are displayed in all the pages. But if i call this summary.RTF from another main template then headers and footers are dispalyed in the 1st page only. I cant call the headers and footers from the main template since the main template calls many other templates apart from Summary.RTF. This headers and footers should be displayed only for Summary.RTF
Thanks.

Error message when printing Sales Order

Hi,
I get following error message when printing out a sales order just created.
No matching records found 'Document' (RDOC) (ODBC-2028) (Message 131-183)
Logged in as super-user, posting periods is unlocked. It is a new company just created. With sand-box company no errors-it prints properly to same printer.
What could be the problem?
Thanks,
Ajay Audich

Have you tried with system PLD?
Thanks,
Gordon

Looking for some help with an error message when exporting master file. I'm stuck and would even pay to get this sorted out!

Hey guys, I'm really in a bind here and need some urgent help tonite. I would even be willing to pay for some actual help and not some vague information that i may not be able to understand if we could do something via skype or some other way that would be much quicker than a message board. Of course I have to have the project done by tomorow . so I'm new to fcpx, but have succesfully exported 2 other projects. I've also ran into this predicament before (error message not allowing me complete export) and have been able to solve that by converting the files i imported off my camera (canon g20) to a different file type (prores).
so where I'm at now: i have a 13 min short, all shot on my canon g20, imported and converted to prores422 with the brorsoft video converter with all the shots in a single event in fcpx. i'm using fcpx version 10.0.08. I have one main video track in my timeline that is completely full of very fast edits. (all quick 2-5 second clips, sped up shots in 2x, 4x, or 8x, tons of transitions, titles, and a little fx. theres 2 audio tracks, one is narration/speech and the other is an ongoing music track that constantly ducks everytime the subject speaks (tons of ducks/edits). Have you seen mtv cribs? Well i filmed an EXACT replica. So If you've seen one of those episodes, its literally the same exact same thing. I have all of my work completed, everything has been fully rendered, and i have it exactly as I want it.
I'm including all this information in case it may help. my successful projects ive exported in the past were rather simple, and this one is very complex and full of edits. here is what it looks like in the timeline:
Ive tried exporting the master file using almost all the different ways with no luck. My primary objective is to get it on youtube by any means by tommorow for a showing to a potential buyer (long story) and so I've been told using the h.264 is the best format for that. This, along with the other methods give me the same error message:
It think it gives this error message when i reach 24% everytime during export.
So first of all, what is that error message? Do i need to be concerned about the specifics of it, or is there something major that I'm missing? Like i said, i dont care how, but I need to get this video up on youtube tonite for an important viewing tomorrow. Conceptually, I think if i can figure this one out I shouldnt have any more trouble in the future doing something so basic, yet critical, such as exporting my 40+ hours of work for someone to see.
anyway, I apologize in advance for my lack of knowledge with this software, and for my extremely long winded question which will probably have the opposite effect for me as most wont want to take the time to read all this, BUT i figured if i was as thorough as possible it might help actually getting a concrete answer, instead of a "read the manual, exporting is on page 37." or "use the share button on the right of the timeline then just click export master file and it will work everytime."
Cheers everybody, and thank you. Like i said if someone is up, and willing to talk via skype, phone, messanger or any other method that works for you I would be totally down and will compensate you generously for your time. thanks again.
Taphabit

boom! that advice was correct and worked. i was able to export the full project as a quicktime movie and it can be uploaded to youtube.
NOTE, theres is definately quite a few noticeable audio glitches/lags/pops that werent there before doing this. I believe, and will test to make sure, that having a project such as this one needs to render before exporting. I'm not sure if the advice requires the project to be unrendered before exporting for a specific reason, because if it will export fine after rendering the project that's the way to go. like i said the edited version i have in my timeline plays back perfectly but this exported version has quite a few noticeable audio glitches (a few video glitches too). I'm going to retry doing the first few steps of your advice, but then at the end render, then export and compare the results...
OK, so this leads to a big question, Is this something that is standard for everyone when trying to export? If its not, what causes this error?
is there any way of preemptively avoiding it in future projects?
thanks again, and hopefully this information will help others as exporting seem to be one of the biggest problems in fcpx. any word on a new patch or firmware update?

I updated my itunes to 11 and found out my phone and ipod were not compatible. I uninstalled it and reinstalled 10.7 but now I get an error message when I try to open itunes saying "the file cannot be read because it was created by a newer verison"

I updated my itunes to 11 and found out my phone and ipod were not compatible. I uninstalled it and reinstalled 10.7 but now I get an error message when I try to open itunes saying "the file cannot be read because it was created by a newer verison" What do I do?

Thank you for clarify I'm supposed to read the ENTIRE article. I thought I was just supposed to read the title and magically everything will fix itself. I appreciate you taking the time to help me however I do not appreciate the caps and the way you have addressed the situation. If you are not going to kindly help people/make suggestions just don't try! And for the record my conclusions are not illogical, the iOS7 thing is on the website in small font (which I got by reading the ENTIRE thing) and you should really find a new hobby because your socialization skills need some help! That goes for you too Chris. Not everyone is a tech nerd

Error message when trying to activate caller ID fo...

Hello. I keep getting an error message when trying to activate my caller ID for my mobile number. It keeps saying "We were unable to send you a confirmation code at this time. Please try again later. " I have checked the list of countries excluded from caller ID and my country is not on it. Please can anyone help? thanks
Tia

Same things has happend to me for 4 days.
I have no answer, but I'd sure like one.
-- Gerry

Error message when compiling book "file is corrupt" referring to a photo. Or "cannot find original photo". Can you use photos that have been "edited" out of "Book Mode"?

Error message when compiling book "file is corrupt" referring to a photo. Or "cannot find original photo". Can you use photos that have been "edited" out of "Book Mode"?

I did copy it to my desktop, but it still won't let me open it. I think the file on the disc might be corrupt or something like that though the cd itself checks out fine as far as viruses go. I was able to verify the disc, but that's about it. My husband tried it on his iMac and we have the same issue. It's unzipping the folder, but won't let us open the folder on both the Mac Book Pro or the iMac by double clicking, going to file/open or right clicking. It just keeps saying the same message as I posted above. I think I'm just going to have the client put the pictures on either a memory card or a USB memory stick so she won't have to compress the files for zipping purposes. It's been too frustrating trying to open this folder on this cd she gave me. She said she created/zipped the cd on her Mac Book Pro but it sure won't open on mine.

Why do I get this error message when I open Organizer in Photoshop Elements 11 "Elements Organizer has stopped working"? My only option is to Close Program so I am effectively locked out of my photo catalogue. I have reinstalled the program to no avail.

Why do I get this error message when I open Organizer in Photoshop Elements 11 "Elements Organizer has stopped working"? My only option is to Close Program so I am effectively locked out of my photo catalogue. I have tried reinstalling the program but it made no difference to the error message.
Could someone help please? Steph

Hi,
Please give a try to Photoshop Elements (PSE) knowledge base. steps mentioned on this and see if it works.
Regards
Kishan

Verizon Error Message when Calling out?

Similar Messages

Maybe you are looking for