Verizon Gateway User and Pss, Mi 424 wr rev d
i have a actiontec mi 424 rev d and i was trying to port forward for something. but it brought me to the gateway and asked me for a username and password. I have searched the internet for hours and cant find anything! I have tried Admin and Password, and my serial numbers but i cant get it right! can someone please tell me the default username and password
I posted the issue on this forum about connecting an external hard drive to the MI424WR and I found that it might be possible with a firmware update to the router. In order to update the firmware I need to access the router- Per the actiontec website the username is ;admin and password is assword1 - however that doesn't work for me either.
Not sure what to do now, I guess call Verizon. If I reset the router to reset the user and password to the default, it will reset all wep key and stored info so I have to reinstall everything! I don't want that either.
Similar Messages
-
What is Gateway User and password in Oracle Discoverer Administrator
hi.
i have install BI tools and want to connect to database. what is Gateway user ID / Password and Foundation Name and what username i give in it and how i can use discoverer desktop.
plz urgent
thxHi,
While in the Tools -> Options -> Connections screen, you'll need to complete the following gateway info, this is usually:
gateway user id: APPLSYSPUB/PUB
foundation name: APPS
You'll also need to ensure you have the correct TNS connection setting defined in your TNS file.
Hope this helps you get started.
Lance -
Netweaver Gateway user creation and self registration Procedure
Dear All,
Can you please provide the complete step by stpe by process for creating netweaver gateway user creation and self registration process
by useing templates.
Thanks & Regards.
aYYaPPa.Hi Sriram
Thanks for immediate response.
I went throgh that link whcih is posted by you.
But i need some more explosure to undesrtand user creation by using that templates
Thanks,
Ayyappa. -
ASA 5510 as Verizon gateway for multiple public IP's
Hello, This might be a trivial question but I never before used ASA5510 this way. I know ASA5510 is not a typical router.
Here is the scenario:
1) Point to point connection to ISP (mask /30) - Configured on Ethernet 0/0
2) Group of public IP's (mask /28) - Configured on Ethernet 0/1
Can ASA5510 be configured as "main gateway" to ISP? There will be no private IP's involved. On the Ethernet 0/1 side there will be couple of servers that will use Public IP's (62.62.208.226-238, with gateway: 62.62.208.225).
Please see attachment and configuration. Unfortunately I'm unable to test on live environment that's why I would like to know ahead if that's possible and I want to be sure that attached configuration is correct.
Thank you!
: Saved
: Written by enable_15 at 13:33:42.769 EDT Sun Jun 22 2014
ASA Version 9.1(5)
hostname VERIZON-Test
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
names
interface Ethernet0/0
nameif Verizon-OUT
security-level 0
ip address 210.210.2.174 255.255.255.252
interface Ethernet0/1
description Verizon Access
nameif Verizon-IN
security-level 0
ip address 62.62.208.225 255.255.255.224
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
management-only
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
boot system disk0:/asa915-k8.bin
ftp mode passive
clock timezone EST -5
clock summer-time EDT recurring
same-security-traffic permit inter-interface
object network Verizon-GATEWAY
host 210.210.2.173
pager lines 24
logging asdm informational
mtu Verizon-OUT 1500
mtu Verizon-IN 1500
mtu management 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-721.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
route Verizon-OUT 0.0.0.0 0.0.0.0 210.210.2.173 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh stricthostkeycheck
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
: endJust to be a little picky a transparent device is one that does not decrease the hop count of a packet...so technically it is not a transparent device and is being used as a plain old router.
which leads to the question, why did you decide to use an ASA if you were not going to filter traffic?
But to answer your question, no you would not need an ACL to permit traffic between two interfaces with the same security level when you have the same-security-traffic permit inter-interface command configured.
Please remember to select a correct answer and rate helpful posts -
Router/gateway mode and NAT
In a posting in this site, it was suggested that NAT replaces router/gateway mode as used on the WRT54GS. I am wondering if that is correct.
Why? I have a WRT54GS (firmware v4.71.4, Oct. 31, 2007).
This works:
I have a class C IP block (full 256 addresses). I have the WAN side set up with
xxx.yyy.zzz.129 wan address
255.255.255.128
xxx.yyy.zzz.254 (default gateway)
(this forces the WAN side to just use the high 128 addresses - I am only using 129)
then, for the router IP, I have
xxx.yyy.zzz.15
255.255.255.0
and DHCP is
xxx.yyy.zzz.90 and 20 users
The LAN side uses the low 128 addresses.
This all works. I have the WRT set up as a Gateway (not Router)
HOWEVER,
I tried this on an Asus 56U box which has the NAT setting but no router/gateway mode and it won't allow the xxx.yyy.zzz block to be used on both the WAN and LAN sides. Is the Asus broken or is your answer wrong?
Why was I looking at the Asus? Someone recommended it to me. I would be happy to use a Linksys box instead if you can tell me which one would support the router/gateway mode.
My WRT54GS is working fine but I now have a Verizon Net Connect boax that uses VPN and VoIP and am getting a lot of delay.
I was thinkning that a newer box might be faster.
Thanks!!I've seen some of the new routers with cisco/linksys that it does have the capability for NAT to be disabled if that is what you are looking for. But I agree with the person above me.
-
15 concurrent users and JBO-35007 row currency has changed
Hi!
Something for the weekend :)
I have an ADF/BC 10.1.3.3. application on 10.1.3.3. Oracle AS. I use a jazn security with users and roles stored in database tables. While testing with one or two users I never ran into the same problem as we had this week when testing with 15 users. I have an entity and VO with a whole attributes that are edited in a couple of jspx pages that composed with process train control. There are also a couple of detail data edited on this page. I'm using ProcessScope quite a lot to pass some information between the pages.
Well, to get to the point: when testing with 15 users we had A LOT of JBO-35007 row currency has changed since the user interface was rendered errors in this process. Every user was editing it's own data row. The error appeared every time a user left the application inactive for a couple of seconds, entered some data and clicked commit. I'm not aware of the security settings of the browser on the testing computers and I can't get them now to see if something like this could be the problem.
When I checked the log files, there are a lot of errors or warnings in them. I'll try to sum the ones that might be important for this issue. These errors appear a lot's of times in these log files that is why I'm assuming some of these are connected to my issue.
application.log file in application-deployments logs:
08/04/23 09:58:42.443 MyViewControllerArchive: Servlet error
java.io.IOException: An existing connection was forcibly closed by the remote host
08/04/23 11:31:47.980 MyViewControllerArchive: Servlet error
java.io.IOException: An established connection was aborted by the software in your host machine
08/04/23 11:31:49.402 MyViewControllerArchive: Servlet error
java.lang.IndexOutOfBoundsException: SelectOne submittedValue's index 0 is out of bounds. It should be between 0 and -1
08/04/23 11:33:19.104 MyViewControllerArchive: An established connection was aborted by the software in your host machine
08/04/23 11:33:19.104 MyViewControllerArchive: Servlet error
java.io.IOException: An established connection was aborted by the software in your host machine
A whole lot of these kind of errors:
08/04/23 11:24:06.80 MyViewControllerArchive: Servlet error
oracle.jbo.common.ampool.ApplicationPoolException: JBO-30019: An unavailable cookie state was detected while attempting to use a cookie. applicationId: 54ffe51d30d5c84e0cb1979645a196749529aeb674d8, sessionId: MyModuleDataControl.
08/04/24 08:39:22.424 MyViewControllerArchive: Servlet error
java.lang.IllegalStateException: Response has already been committed
log.xml file in oc4j folder:
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-04-23T09:53:49.165+02:00</TSTZ_ORIGINATING>
<COMPONENT_ID>adfinternal</COMPONENT_ID>
<MSG_TYPE TYPE="WARNING"/>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>my_AS</HOST_ID>
<HOST_NWADDR>my_IP</HOST_NWADDR>
<MODULE_ID>view.faces.model.binding.FacesCtrlRangeBinding</MODULE_ID>
<THREAD_ID>10</THREAD_ID>
<USER_ID>SYSTEM</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID>
<UNIQUE_ID>1208937229:my_IP:3020:1764:630</UNIQUE_ID>
<SEQ>1</SEQ>
</EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>rowIterator is null</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-04-23T09:48:30.903+02:00</TSTZ_ORIGINATING>
<COMPONENT_ID>j2ee</COMPONENT_ID>
<MSG_ID>J2EE DS-00265</MSG_ID>
<MSG_TYPE TYPE="WARNING"/>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>my_AS</HOST_ID>
<HOST_NWADDR>my_IP</HOST_NWADDR>
<MODULE_ID>datasource</MODULE_ID>
<THREAD_ID>12</THREAD_ID>
<USER_ID>SYSTEM</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID>
<UNIQUE_ID>my_IP:57162:1208526415373:226</UNIQUE_ID>
<SEQ>0</SEQ>
</EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Unclosed connection detected : 'oracle.oc4j.sql.spi.ConnectionFinalizer@f67148' : ''.</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-04-23T09:53:54.165+02:00</TSTZ_ORIGINATING>
<COMPONENT_ID>adf</COMPONENT_ID>
<MSG_TYPE TYPE="WARNING"/>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>my_AS</HOST_ID>
<HOST_NWADDR>my_IP</HOST_NWADDR>
<MODULE_ID>controller.faces.lifecycle.FacesPageLifecycle</MODULE_ID>
<THREAD_ID>13</THREAD_ID>
<USER_ID>SYSTEM</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID>
<UNIQUE_ID>1208937232:my_IP:3020:508:635</UNIQUE_ID>
<SEQ>299</SEQ>
</EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JBO-35007: My 35007 JBO message since I overwritten the message text</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
The problem is I can't reproduce this behaviour any more in my environment. If someone could maybe point me to the errors that are important and could be the cause of this errors. Could this be an internet browser security settings issue? What about those errors about aborted connections?
If you can't provide me an answer (which I know it would be very difficult by the information provided), maybe you could explain the cause of some of the errors described above?
I'd appreciate any tips on this since I don't have e an idea how and where to start to at least reproduce and find out the cause of this. Than I'll worry about the solution :).
Thank you in advance,
BBHi,
I am also facing the same issue JBO-30019: An unavailable cookie state is detected while attempting to use a cookie from application {0}, session {1}.
Is there anyone who has been able to reproduce this. If yes can you please update the following bug which is logged for the issue: [9507310|https://bug.oraclecorp.com/pls/bug/webbug_edit.edit_info_top?report_title=&rptno=9507310&query_id=814000&rptno_count=1&pos=1]
It will be of much help.
I have found the following page referring the problem: page, if this helps.
Please update.
Regards,
Ashis
글 수정: user9546421 -
Verizon Online Backup and Sharing Error Message
Started getting Verizon Online Backup and Sharing error message at startup about two weeks ago and can't connect via VISS. Anybody else out there having this issue? Tried downloading update but can't open the file. Also seems to be affecting VIHA. - takes forever to open. Heard syncNshare has been hacked. Is this true?
Sorry to hear about the problems with your Verizon software. So we can get more information from you, I have copied your post to our private support board. Please refer all correspondences to there from here on out. You can easily get to the private support one of two ways. In the email you signed up for the forums with, you will receive a link to click on. Make sure you are already signed into the forums before clicking on this link. Another way of getting there is by clicking on your username anywhere you see it in the forums. This brings you to your account profile. Scroll down to the section labeled "My Support Cases" . In there you will see the link to your case.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan -
Can Verizon transfer DSL and phone from one residence to another?
So I'm not a customer of Verizon yet, but if I can get help with this I will be. My in-laws have been customers for 18 years. They have phone service and DSL. Now the area where I live, DSL is very limited. In fact, they won't let me set up a new account for DSL. Now my in-laws will no longer be using their Verizon Service, so i thought I could score a transfer of service and then everyone will be happy! Anyone that has knowledge of Verizon's policies please let me know. I called, but they are closed. Please help thanks!!
Message Edited by templarvisonz on 05-12-2009 04:06 PMDSL service requires certain equipment in the Vz centrol office to provide the service to an area. If DSL is not available for you as a new customer, it will not be available to you as a transfer from your in-laws. Either the central office equipment is not available or your home is too far from the Verizon central office.
You may want to check to see if FiOS is available in your area. DSL and FiOS Internet are two broadband services Vz offers. One, DSL, is over copper lines, and FiOS is over fiber optic cables.
Larry
Verizon Telecom
Vz Voice Portals & Connection Wizard
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. -
Come The New Requirements Gateway Users Group
Hello all,
Have you ever tried to find an answer to a issue you are having with Requirements Gateway and been frustrated by not finding a dedicated forum or users group, well no longer!
A Requirements Gateway User Group has been created on the communities and everyone, even those who are only curious, is invited to join. There isn't much content at the moment since it's still a bit of a fledgling. Please join and add your content, questions, & tips to help us grow.
You can join by going to https://decibel.ni.c...way-users-group
See you there.
Wire Warrior
Wire Warrior
Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!Hi D. Kelley,
Thanks for the details. Based on your description, you might need to change or update the SID for users. Try identity command to change the username if you never use the new username in TFS. Check this page for more information about
identities command in this
page.
You can also check the table "tbl_Identity" in the tfs_configuration database to see if the new user exists, or it has the old user. Another option is have a check on other machines to see if it works fine. Refer to links below for more information:
https://social.msdn.microsoft.com/Forums/en-US/93568425-a877-4d21-8497-1adc4561b6d3/unable-to-check-in-code-to-tfs-due-to-tf14002-the-identity-old-user-name-is-not-a-member-of-the?forum=tfsversioncontrol
https://social.msdn.microsoft.com/Forums/en-US/acc56859-624f-41bc-b698-cbb5e0b8f525/cant-check-in-code-the-identity-devoldusername-is-not-a-member-of-the-team-foundation-valid?forum=tfsversioncontrol
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Re: Why are there numbers not showing up on my verizon online call and texts log?
I am having the same problem with texts not appearing on my online text log and have also noticed a huge increase in data since my two sons have had their iPhone 5s. I have the iPhone 4. Two problems here
iPhone users DO appear. In the posted questions and response below, you indicate that if we are all using iPhones then we are not using the Verizon network but using data. HOW DO I STOP THIS DATA USAGE AND RETURN TO USING THE NETWORK? I can't afford the data charges that I am getting.. HELP!! and Thank you.
1. Re: Why are there numbers not showing up on my verizon online call and texts log?
SuzyQ May 11, 2013 8:03 AM (in response to aheath17)
If you are all using iPhones, then it's likely the texts are going through iMessages and therefore use data. Since the texts are not using the Verizon network, but the app, they do not show up in the logs. The app is not specifically blocking the texted numbers from showing up, but the information comes through Verizon as data usage, not numbers texted.Sparkyjames81,
Lets figure out just where those texts are going! There are many apps that can be downloaded from the Play Store for Android phones that will allow messages to be sent over the internet, and therefore they are not actually text messages and will not show up in our records. Even Facebook has their own messaging app available that does this.
If you have an iPhone, they come with a service called iMessage that allows for messages to other Apple devices be sent via the internet, and this will also not show up on our records. These are all ways to bypass our actual texting services, and since these messages are not being sent as texts they do not show up on our records.
SarahO_VZW
Follow us on Twitter @VZWSupport -
Currently have been using my ipad 2 to open and read my emails from Verizon.
Last week Verizon upgraded to My Verizon 2.0 and it is not compatable with the ipad 2.
I can't open my emails or scroll down to read them. I called Verizon and Apple and no one can help me..
Has anyone experienced this same issue on their ipad?
Frustrated verizon ipad user.You can also go to https://www22.verizon.com/ForYourHome/VZRepair/vziha/Service.aspx?ihaweb=EmailSe tup
and it gives you a step by step on adding your account. However don't use the server port number they give you because it does not work. I followed the same steps without changing the number and it worked.
The problem I have is that I can not see the folders I created on my Verizon email account, when I open it on my iPad. I have called Verizon & gone to the Apple store and neither had an answer except to say it was the other's problem.
Can any one help? -
Sub-account Users and FIOS phone call logs
Verizon created FOUR separate account "Profiles" within my home for Internet and Phone Logs viewing use at the outset of their installation Two weeks ago.
One Primary acct... which Verizon designates.... and THREE other Sub-accounts. Seems ONLY the Primary account is allowed permission to View FIOS phone call logs, block numbers etc.... We changed over from COMCAST a couple of weeks ago where not Only did the Primaey account had these priveleges, but that same Primary account bestowed priveleges to all the other Secondary Sub-accounts to do the same via a check box.....don't see that here.
so I'm wondering is Verizon allowing only ONE acct ..(ie. Primary) to have this feature?
CSAMPERHello,
Unfortunately that feature is not available. Here is more information in reference to our primary accounts.
http://www22.verizon.com/ResidentialHelp/HighSpeed/Account+Tools/Account+Management+Tools/QuestionsO...
Shamika_Vz
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. -
User and group mapping on IPSEC EZVPN.
Hello,
I set up an ASA5520 vpn gateway for ezvpn. one ACS4.2 server is used to authenticate the vpn user.
there are 4 groups in the vpn configuration. each group has different group policy .
everything is working well.
now, one more requirement arise:
the users should be locked in corresponding group, that means, user A belons group A, so, he can only uses group A's profile.
if he uses group B's profile, the authentication will fail. Even though the group profiles are on same ASA5520, and the user information is correct in ACS.
I'd like to solicit you advice on that feature, is there a way to do that?If I recall correctly, there is no inheritance of user and group rights in PT, at least not in 5.x. If you give some rights on a specific object/folder to a specific group, then it will be for that object only and none of its children.
You do have a choice of propagating of user rights down the ownership tree however. I.e., if you select a community and set some rights for yourself, it will prompt you if you want to propagate the same permissions down the chain, to all of its children. If you say yes, it will replacepermissions on all its children by creating copies. If you say no, you'll have to go and apply different permissions on each child individually.
Ruslan. -
Gateway user maintenance for FIORI app
We are currently in the process of implementing FIORI and are working into the user creation on the Gateway. We do not want to turn on AE because we do not want it to be visible to users. From our analysis, there does not seem to be a standard process. We are going to develop a new auto role maintenance process. We want only the relevant tiles to display based on the user's role(s).
We came across this Note:
Note 1868136 - Adding tiles to Fiori Launch Pages without PFCG
Solution
This note describes a way, how the set of tiles enabled for a specific user by implementing a BAdI.
In this BAdI implementation you change the list of catalog provider nodes extracted from the
standard menu tree based on the current set of roles assigned to the user. You can remove existing
entries or add new ones.
To accomplish this, please perform the following steps:
1. Apply Netweaver UI AddOn 1.0 SP08 or, alternatively, apply the correction instructions of
this note.
2. Copy the class /UI2/CL_ROLE_EXT_CATALOG_PAGES to a page in your package and namespace, e.g.
ZCL_ROLE_EXT_CATALOG_PAGES
3. Create a BAdI implementation of the BAdI definition /UI2/BADI_NWBC_RT_EXTENSION, named e.g.
ZNWBC_TREE_EXT_BI
4. Assign the copied class to this BAdI implementation
5. Change the method ZCL_ROLE_EXT_CATALOG_PAGES->GET_CATALOGS. The source code contains some
template code meant to guide you in this task.
We tried implementing ‘/UI2/BADI_NWBC_RT_EXTENSION’ BADI in gateway system as per the instruction
given in the note and kept a breakpoint and launched the Fiori launch page. But
BADI was not triggered.
There is no information on; when and where this BADI
will be called by gateway system.
Can anyone give more information on this Note, BADI, or the Gateway user maintenance process for FIORI?
Is the custom solution the best way to do the user maintenance?
Thank you,
Judy
Tags edited by: Michael ApplebyHi Masa,
Right now we have only tested the PR approval in FIORI and are getting ready to implement that. We are looking at the best way to do user maintenance in the Gateway for FIORI. We have designed a custom solution but were wondering if the Note above will help us implement a better solution.
The requirement is to show the relevant tiles to a user based on their role in the application. Ie. for PR approvals, if they have the approver role(s) in ECC then they should see the PR approval tile in the FIORI launchpage.
What are you referring to when you say 'catalogs and Groups'?
Thanks and regards,
Judy -
How to find out list of users and their access on Sharepoint
Hello Everyone
How can i find out list of users and what access they have on SharePoint site? I want to create table with list of the users and their access?
Thanksyou can get the report using below powershell scripts. first one gives list of users in a site collection level.
The second link generates the permissions reports for each user.
http://techtrainingnotes.blogspot.com/2010/12/sharepoint-powershell-script-to-list.html
https://sp2010userperm.codeplex.com/
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful
Maybe you are looking for
-
Create a Link using Dynamic Text and Capture Variable
I am building a dynamic website using Dreamweaver CS5 with Coldfusion 9 Currently I have created a dynamic text table. The table is created by querying the Invoice table and displays the all the customers Invoices. The columns Include Invoice #, Date
-
Does anyone have SNMP toolkit for labview software by viodia?
I want the software called SNMP toolkit for Labview. I tried contacting the people of www.viodia.com, but none of them have replied so far. If anyone has then please send me at [email protected] or [email protected] . Thanx Santosh Chavan IIT MADRAS
-
Please help with creating QTVR movie
Hi I'm trying to create a QTVR for the first time and I'm using VR Worx. I intend to make a drawing referring to photos and use the drawing as a single pano image for a QTVR movie. First I decided to learn the creation process by using this Image: ht
-
Scaned Image won't let me select a section
After scanning my image that I want to fix, I am not being able to make a selection on the image to fll in color or correction. I am getting this error message. "No pixels are more than 50% selected the Selection edges will not be visible" What am I
-
I reset and backed up my Ipad 2 and now i can't play any of my purchased songs?
I reset and backed up my ipad 2 and now i cant play and of the songs or music videos i purchased. Some of the purchased songs won't even play all the way through on itunes. I have no idea whats happening. I just want my music i bought.