Verizon iP4S signal loss after phone call

So, I'm new to Verizon, long time ATT customer. So, I have a 4S, wife has a iP4. After i get done with many, but not all, phone calls, my phone completely loses signal and the carrier banner says "Searching." using 5.0.1. Wife's using iOS 5. I have done the *228 PRL update. Same thing, after many phone calls, loss of signal, have to wait to reacquire before making another phone call. Any hints or tips?

settings - general - reset - reset network settings.
also do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
If the above doesn't work, then suggest you contact your cell phone provider and let them know about your cellular data issue.

Similar Messages

  • IPhone apps not resuming after phone call - iOS 7 bug

    iPhone apps not resuming after phone call - iOS 7 bug
    With iOS 6, while playing music on Spotify or playing Candy Crush, etc, if the phone rang and I answered, or if I made a call, once the call was ended, the app I was using would resume. The music would start playing again or the game would resume.
    In iOS 7 this isn't working. Listening to music, I answer a call, music stops and when call is ended, nothing! the phone stays on the phone app.
    anybody else see this behaviour?
    thanks!

    Any ideas anyone?
    thanks

  • DLNA shows up after phone calls

    After every incoming call I get on my Droid X, DLNA pops up.  I don't use DLNA.  But I cannot stop it from popping up which it does without any interaction from me.  Since I cannot delete it from the phone (which I'd like to do) and since it has no settings to configure to stop it from executing, how can I get it to stop loading after phone calls?

    If this is happening on the current software update, there could be a way of clearing it out.  Instead of master resetting the device (also an option if these steps don't work), try clearing the cache on a few related applications. 
    Go to setting> applications> manage applications> all.  Clear cache/data/force stops on the following applications: Dialer, Dialer Storage, DLNA, and Phone.  Remove the battery after doing this. Retest this and see if it resolved the issues with DLNA popping up.  
    If this does not can someone try a master reset (steps) to see if this resolves the issue if the above steps do not?  Please post the results.  I researched this as much as possible, but I haven't noticed a common trend.  
    Thanks for bringing this to our attention, and please follow up with the results. 

  • Signal loss after updates 4.3 & 4.3.1

    Just wondering if anyone else has had signal problems after the latest round of updates? Never had a problem before at all, but now it's showing the network connection lost & no service on a regular basis, all in areas where I've had no issues in the past. Tried reboot few times, no effect. Could be a massive coincidence that the network may be having problems, anyone from the UK on 3 confirm this? Cheers

    Exactly the same problem, on Three U.K.
    It's not the network though - I have two iPhone 4's sat next to each other - one upgraded to 4.3.1 and one still unupgraded (and won't be until this is fixed).
    No signal in most of my house, and even when I get a brief one bar calls drop.
    Have tried all the obvious :-
    1. Full factory reset and set up as new iPhone.
    2. Tried swapping SIMs - problem stays with 4.3.1 phone.
    Looks like the new baseband is broken or at the very least has been set to consume less power hence not enough power to it.
    Very disappointed.

  • Nokia E6 - Signal Drop after every call

    Hi,
    I have started to face this problem for the last 8-10 days.
    After every call is completed there is a signal drop for about 30-40 seconds. It drops to zero & then comes back to full strength again.
    I have updated the phone software to the latest version and still have the same problem.
    There is no problem if I use my sim card in any other phone.
    Thanks for your solutions in advance.
    Cheers
    KD
    Solved!
    Go to Solution.

    Hey,
    Thanks a ton...working for me so far for the last 3 calls...
    If only you had replied earlier ...it would have saved me from going to the Nokia Service Center, who told me to change my SIM card...which I did as well with no solution. LOL
    I wonder where the nokia moderators are ..not even one reply for almost 3 days now..
    anyways ..thanks a ton buddy
    Cheers
    KD

  • Treo stops responding after phone calls

    I can take a call.  Stay on the phone for a few minutes.  Hangup the call and then the phone functionality will not work.  The phone is locked up.  Other menus do work and I can open and close applications.
    Post relates to: Treo 800w (Sprint)

    The phone function is a built in part of the Operating System on the device and if it stops working after 1 call this would mean there is a problem with the OS on the unit.
    I would suggest you hot sync and then do a hard reset on the unit and test the phone again if it works correctly then it could mean there is something that is syncing over to the palm that is corrupting the OS.
    If the unit does work after the hard reset you should rename the back up folder normally located in the c:/programfiles/palm or palmone folder then what ever user name you are syncing to and find and rename the back up folder then set the conduits to desktop over handheld for the cal., con., memos, and tasks and sync this should give you all of your data back but no settings or the possible corruption
    Post relates to: Treo 650 (Verizon)

  • 3G Signal Loss after upgrading to ios 4.0.1 ?

    Hello Everyone,
    I don't think that I am the only one with a 3GS that is having this problem. I have the iphone 3GS, I was very excited to upgrade to ios 4.0. Once the upgrade was complete everything was just fine. Then came along ios 4.0.1, I figured why not. Isn't that what you are supposed to do to keep you phone up to date. Well, ever since I upgraded to ios 4.0.1 I have lost my 3G signal. My wife's phone is the exact same model, purchased at the exact same time. She is still running ios 4.0 and not having any problems. I spoke with Apple Care today and they said that ios 4.0.1 was in no way going to affect the 3G signal strength. Now, if I take my phone and my wife's phone and hold them side by side. She will have full signal and I might have one bar. Then when I go to safari and try to load a web page. Her phone,(with 5 bars) will download twice as fast as mine.
    Is there any way for me to go back to ios 4.0?
    Thanks Apple for fixing all of the iphone4 problems and creating one on the 3GS and then not acknowledging it.
    Any help would be greatly appreciated.
    Thanks,
    Demi

    THERE IS A GROWING AND VERY STRONG DISTASTE AT THE LACK OF SUPPORT AND INTERVENTION BY APPLE IN HELPING THE MANY THOUSANDS OF PAYING CUSTOMERS WHO HAVE PURCHASED IPHONES AND FIND THEY ARE NOT FIT FOR PURPOSE.
    I AM HAPPY TO INVOLVE THE BBC IN THE UK AND OTHER MEDIA SOURCES TO HAVE APPLE SIT UP AND TAKE NOTICE OF THE NUMBER OF DISSATISFIED CUSTOMERS WHO HAVE PAID LARGE SUMS OF HARD EARNED MONEY FOR A PHONE CAPABILITY THAT IS DISGRACEFULLY BAD. LIKE MANY OTHERS THE IPHONE CAN BE PLACED ALONGSIDE OTHER COMPETITOR'S DEVICES WHO HAVE CONTINUALLY GOOD AND CONSTANT SIGNAL STRENGTH WHILST THE IPHONE SHOWS NONE.
    ON A PERSONAL BASIS THIS PHONE HAS CAUSED ME TO LOSE OUT ON A NUMBER OF SIGNIFICANT PHONE CALLS, SOME INVOLVING THE DEMISE OF A RELATIVE - MATTERS THAT CAN NEVER BE REPLACED. AND YET THE ISSUES REMAIN.
    PLEASE, ANYONE, FEEL FREE TO EMAIL ME ON [email protected] WITH CONSTRUCTIVE COMMENTS ABOUT THE POOR QUALITY OF THE PRODUCT (IPHONE 4 OR 3GS) AND THE EXTENT TO WHICH THIS MATTER HAS BEEN OCCURRING AND THE IMPACT IT HAS HAD ON YOU EITHER DOMESTICALLY OR IN BUSINESS. I AM LEAD TO BELIEVE THAT THE FAULT DOES NOT LIE WITH THE NETWORK BEARERS, BUT IN THE APPLE IPHONE DEVICES THEMSELVES
    I CANNOT PROMISE TO DO ANYTHING OTHER THAN COLLATE THE EVIDENCE THAT IS COMING IN FROM SO MANY SOURCES AND PROVIDE IT TO THE MEDIA GIANTS THAT MAY CAUSE APPLE TO DO SOMETHING. FRANKLY I THINK ALL THE DEVICES SHOULD BE REPLACED WITH ONES THAT ARE FIT FOR PURPOSE OR REFUNDS GIVEN. PLEASE GIVE ME YOUR VIEW ON THIS IF WRITING TO ME. THANKS,
    THANK YOU FOR READING THUS FAR. JDMCB

  • Signal losses after restoring. Why?

    Hello,
    I currently have a problem with my iPhone5c’s signal, bought from September last year. It suddenly started a few days ago.
    My signal on the phone keeps on failing. It keeps on saying “Searching…” and it sometimes catches the signal and would say “EE 4G”. However, instantly afterwards, it switches back to “Searching”. This repetition happens continuously and not only unable to connect 3G, but I cannot even make a call or a text to people.
    Also, when I try to go to “Settings” and to “Mobile”, it refuses to open and goes back to the main page.
    When I erase all the content of my iPhone and start it up as a new phone, the problem seems to get sorted. The phone will get its signal back. Nevertheless, when I try to restore the data from iTunes to the phone, the problem also comes back. No matter how many times I tried, the result seemed to be the same. (I have tried it 4 or 5 times). From this, I believe the problem is not on the iPhone’s hardware, but in the software.
    I have taken my phone to the Apple Geniuses counter, but they told me the problem should be on the software and if restoring brings the problem back, it is best to set up the phone as a new phone as finding one part that is causing a problem will be difficult. I have tried it myself, but the problem remained the same even when I deleted all the apps and the photos and refreshed it. I have even updated all the apps and the iPhone’s software into IOS7.1, but it did not help.
    Does anyone have any idea of fixing the problem without losing all the photos, apps, music data that currently sits on the phone?
    As I am out of ideas I would appreciate for any ideas or tips.
    Thank you for reading such a long statement.

    Import all your pictures, sync your contacts, music and apps can be reloaded. You have no choice; if you want the phone to work right, you're going to have to restore it as a new device.

  • Iphone crashes after phone call

    My iphone 3gs will crash immediately after completing a phone call. I don't even hit "end call". Crashes as my lower the iphone from my ear. Need to do a reset each time. Any suggestions?

    Do you have a case on it?
    Try removing it and see if that helps. A case can block the proximity sensor.
    You can try a restore as well.
    http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

  • Song starts from begginning after phone call

    Hi there, I have 2 annoying problems with my built-in music app. The first: I can't manage on turning the music on using only the button on my headphones. I should say that I'm not using the sony headphones. Is this can probably be the reason for that? Or can I use any headphones with a mic? I should also say that it happens only when I'm not using the player for a long period of time. Is this the reason? The second: After trying to turn-on the music using the button on my headphones I hear a little 'beep' that probably indicates that the operation wasn't successful. If I turn on the player manualy, I often have to face a situation that the track I'm listening to starts from the begginnig in case of making a random phon-call as I listen to the music.Do you have any idea why does it happend? Could you help pls?  Thank you!

    j444lh wrote:
    You haven't got Nokia Car Mode installed gave you?
    Thats what hapens with it, if not I'd suggest a re-install of belle using Nokia Suite, before you do that a Battery out reset may be worth doing, hold power button untill you feel 3 vibrations.
    Thanks for the tips, but it didn't work. I do not have Car Mode and I re-installed Bell/reset factory settings a couple of times (for different reasons, this is not my only problem with Belle). This behavior started immediately after "upgrading" (if we can call it an upgrade) to Belle - I have not seen this when using Anna.
    During hours of re-installing and testing, I found other instances when the music player starts by itself: whenever I press or long-press the Menu Key, and when I press the Power Key. Unbelievable!
    Some good news: running Skype prevents the system to automatically open the music player. Apparently Skype takes over the audio and does not let the OS behave irresponsibly. If you could only install Skype for Belle... (ha, ha - you have to hack it, it is not available at Nokia store; see my Skype posts).
    It is unfortunate that users should waste so much time trying to debug basic functionality. Many of us would be happy to just go back to the previous version (if Nokia provided it) and not be forced to use an untested one.

  • HT1688 iphone plays recent podcast after phone call.  this is after recent update.

    iphone reverts to last played podcast after making a phone call.  I thought this was fixed by last update, but apparently not - is there a fix?

    Exactly the same problem - iPhone 3GS 16G, updated it on Wednesday and has rebooted at varying times during calls. Went straight to the Apple store to be told to try a restore. There was a carrier update when I connected to iTunes about an hour ago, so I wondered if that would make a difference. I'm with O2.
    Did some test calls to my dad, it was good fun trying to pad out a conversation knowing that we were both waiting for the phone to cut out!!
    First reboot was after 7mins, then at 18mins 31 sec.
    After this reboot I decided to make sure that the only app that was running was the phone app. Strangely, when the phone reboots itself, it doesn't close the apps that are multitasking, so when the phone has restarted they are still there.
    I closed them all down and managed a 20min phone call with my dad, then he had to go out so we hung up.
    After reading this forum I'm reluctant to restore my phone as it seems a lot of effort for no reward whatsoever!
    Not impressed, Apple were my technology fave until this! Its worse than Microsoft's blue screen of death!
    Sort it please Apple!

  • Loud volume after phone call. iOS 5 iPhone 4

    I'm having an issue where my ringer volume seems to be up all the way after ending a call, no matter when it's set to. If I use the volume buttons and turn it all the way down, the lock sounds and dialing tone (when you press numbers in the phone) is still extremely loud. I use the volume buttons to change "Ringer Volume" all the way down to one notch, then use the app switch's volume slider and turn it all the way down. Still max volume. The only way to get it back to normal is to go to Settings > Sounds and move the volume slider there a bit, or to open Music and start playing a song. Then everything goes back to normal. What's causing this? It's very annoying.

    Just for a little clarity, the volume isn't actually turned up after the call, it's still in the same location. The sounds themselves, however, seem to be as loud as possible. I can change the volume with the app switcher slider and the volume buttons, but they do not change how loud the sounds are until I go into settings > sound and move that slider a bit.

  • Resume streaming audio by using MPMoviePlayerViewController after phone call is ended

    Hello,
    I am implementing an universal app. In which I used MPMoviePlayerViewController for playing streaming audio and its working fine. But when there is call during playing the streaming audio it stops. I also posted a question on Stack Overflow but no output (http://stackoverflow.com/questions/16333501/resume-mpmovieplayerviewcontroller-a fter-ending-phone-call/16333616?noredirect=1#comment23431276_16333616). How can I resume streaming audio after call is ended. Is there any way so that I can achieve this? Please help me out.

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site
    Restore from backup. See:
    iOS: How to back up
    Restore to factory settings/new iPod
    BTW this is the iPOd touch forum

  • Freeze screen after phone calls end, upgrade problem

    Upgraded my 3Gs iphone to the last version software last week. Started to eperience problems with phone calls after the upgrade. A major problem is When incoming phone calls end, the screen freezes and does not let me do anything even cannot turn the phone off. anybody has a soloution?

    I too am experiencing this problem. It's only been a few days now, ever since I upgraded the OS and installed the latest version of iTunes last week.
    I don't know what the problem is, but I'm sick of it.
    Whenever I MAKE or RECEIVE a call, my screen freezes up and I can't do anything, not even a hard reboot.
    I dropped out of a call to someone and when they rang back I couldn't answer it. So very frustrating.
    As I write this I've just taken a call from my husband, hung up the call, and now the phone is as useful as a paperweight because I can't get any function to work on it, not even the hard reboot.
    If anyone from Apple is listening...What the **** is going on here?????

  • N95 how to disable keypad lock after phone call

    hi!
    i dont know is this the issue with lates firmware v20, but i noticed somehing that is quite annoying.
    after i recieve phone call, and if phone is locked, i open slider, talk, finish call, and then phona auomatically locks.
    is there a way to make it stay unlocked. because if after call i want to check something in phone i need to slide it close, and then open again, witch is annoying.
    thank you.
    ps. same thing happens with bult in lock system, and with best keylocker application.
    so i guess it is firmware feature (or maybe bug)

    Check in your phone settings
    Keypad autolock period—Select whether the keypad is
    locked when your device has been idle for a certain period
    of time.
    Phone autolock period—To avoid unauthorized use, you
    can set a time-out after which the device automatically
    locks. A locked device cannot be used until the correct lock
    code is entered. To turn off the autolock period, select
    None.
    See ‘Glossary of PIN and lock codes’, p. 117.

Maybe you are looking for