Verizon - Iphone 6 plus - phone app getting hanged while doing 3 way conference call

I am using VOLTE in IPHONE 6 Plus with IOS 8.1 and when I am trying to do 3 way conference: I called person A and then I add person B, then I see the following issues:
I press Merge calls and calls are merged but still merge calls & Swap icon is enabled.
When person A/B hangsup, the phone app is hanged and call is ended but it still shows that phone is ending.
If I end the call, still the phone app is hanged and it shows it is ending.
I cannot do any dialing in the phone when phone app is hanged and literally, I have to restart the phone only.
Any other person cannot call me and it goes to voicemail.
All the above issues were happening in IOS 8 and IOS 8.0.2 also. I did reset network settings too but it did not help.
Can someone give an idea for any solution.

    mehulkothari,
Thank you so much for those details. I want to make sure that you are able to use the feature without any issues. One thing that we might want to check out is that all the people that are a part of the 3 way calling is in the Verizon 4G LTE network. This could cause some issues if they are not. Have you been able to power the device off all the way and also remove the sim card for a good 10-15 seconds? http://vz.to/1EdNNMe  Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

Similar Messages

  • HTBasic hanging while doing a GPIB command, Called from TestStand

    I have functions in HTBasic called from TestStand for doing GPIB communications for different test sets. When i run the main sequence, the sequence hangs in a HTBasic step. The step is different every time. Does anybody know about this problem?

    Hi,
    I have some questions.
    Does the HTBasic programs run by themselves?. Or does it only hang when executed in TestStand?.
    What GPIB driver and interface are you using?. What GPIB operations are you performing?. Is there any error message shown?.
    The main idea is to figure out if the error is caused by the GPIB operation or by TestStand.
    Include any information you may consider important.
    DiegoF
    National Instruments.

  • After installing ios8 phone keep getting hanged. Apps are closed automatically

    Many bugs are there in ios8 update.
    After installing ios8 phone keep getting hanged. Apps are closed automatically

    ios8 for my iphone 5 = crashes, hot phone, restarts, dropped calls, funny looking fuzzy 'senior picture screen' with frost on the perimeter.....  Just opening 'message' for texts takes 3-4 seconds to load, where previously, it was milliseconds latency speeds.  I think they pressed this OS beyond the reasonable functional limit of the hardware (phones), especially with the older phones and/or phones with less memory.
    It's like an athlete on steroids, the bones can't handle the force of the muscles and something is gonna BREAK!
    When did we ever come to think that $400 phones would become 2-4 year disposable items and revere at the glory of it all!  And whether we realize it or not, it's being shoved down our throats.
    Just fix the OS please so my phone can work for me as it has in the past.
        For the $$ being paid out, we shouldn't have to reset, restart, restore......
    DB
    -kinda reminds me of the iRobot update-

  • After having iso7 my phone get hanged while answering/calling ?

    after having iso7 my phone get hanged while answering/calling ?

    Hi varinder22,
    If you haven't already done so, you may want to restart or reset the iPhone:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If the above does not resolve your issue, the next best step will be to restore your iPhone using a computer with iTunes. Please be sure to backup your iPhone first.
    Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
    http://support.apple.com/kb/HT5262
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thanks,
    Matt M.

  • When syncing my iphone 6 plus, i now get an error that reads, "IP address conflicts with another system or network."  How can i eliminate this error permanently?   Thank you in advance!

    when syncing my iphone 6 plus, i now get an error that reads, "IP address conflicts with another system or network."  How can i eliminate this error permanently?   Thank you in advance!
    This never happened before, however the last couple of months it comes up every time I plug my USB from PC to iphone.

    HyperNova Software,
    Thank you so much.  Because I am very computer illiterate, could you help me on how to get started?  I don't have the slightest on where to get started, the steps to follow, etc.
    Can't thank you enough for your help!

  • My ipad one sometimes stop responding ,like the apps get hanged and return back to homescreen. how to get rid of this bummer

    my ipad sometimes gets hanged while in apps . but when it gets hanged , its comes to homescreen and stops responding
    how to get rid of this problem

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Then reset: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • How to flash intex cloud fx phone it gets hang on startup

    when reseting my intex cloud fx phone after reboot it gets suddenly hang and its not starting right now it stops at firefox os name what shoud i do and when i restart the phone it gets hang on firefox os name

    Hi,
    Thanks for letting us know about your problem. It seems that your Device need to be flashed. Please contact your Device manufacturer from you you have bough it. For more information about contacting your carrier, please see [[Firefox OS carrier support contact information]]
    Regards

  • I have i phone 3gs, it hangs while operating also upgrade to latest iOS fails ............. please help

    i have i phone 3gs, it hangs while operating also upgrade to latest iOS fails ............. please help

    Your iphone has been hacked and was locked back to the rightful carrier when updated.
    ONLY the carrier to which it is locked can legally/legitimately unlock an iphone.
    Your "brother from New Dehli" hacked the iphone.
    Hacked iphones cannot be discussed here.  It also voids the warraanty.

  • Script getting hang while trying to execute update command in python using cx_oracle

    Hi All,
    My script is getting hang while executing below script and it is not throwing any error.
    TEMP_PROD_cur=TEMP_PROD_schema_conn.cursor()
    sql="update APP_DB_CONNECT set DRIVER=:driver,URL=:url where APPNAME=:appname and CONNECT_NAME=:connect_name"
    TEMP_PROD_cur.execute(sql,{'driver':driver_name,'url':jdbc_url,'appname':app_name,'connect_name':connect_name})
    TEMP_PROD_schema_conn.commit()
    I tried several ways to prepare update statement to execute but the script is getting hang in all the ways.
    Please help to resolve this issue.

    There's not enough info provided to be able to tell what's going on.  You can find online ways to troubleshoot Oracle lock issues - if this is what you are experiencing.

  • Getting error while using HTTP connector and calling POST action to a Web API which is deployed as website on Azure

    I have create Logic App under Azure App Services, I am getting
    error while using HTTP connector and calling POST action to a Web API which is deployed as website on Azure.
    Following are the screen shots:
    Login App Connector Diagram:
    hema

    Marking as answered since no response on request for more information - assuming that you found what was wrong in the inputs. Let us know if you're still having trouble.
    http://twitter.com/joshtwist

  • I am getting error while doing MFBF for semifinisg good

    Hi,
    i am getting error while doing MFBF for semifinisg good
    Existing standard cost estimate cannot be used
    Message no. RM175
    Diagnosis
    This error appears under the following circumstances:
    The existing standard cost estimate cannot be used for backflushing activities as the repetitive manufacturing profile was not maintained correctly when the standard cost estimate was carried out.
    The standard cost estimate must come from product costing. Other cost estimates (such as base object controlling) are not possible.
    Procedure
    The repetitive manufacturing profile assigned to the material at the time of the planned cost estimate must be a profile for repetitive manufacturing with product cost collector.
    Use product costing to create the standard cost estimate.

    I had already check REM profile repetitive mfg profile final backflush w. activities.
    this particular material is semifinish material attached in BOM of finish material.
    backflush of finish good is possible but now new requirement is to do production booking for the semifinish material.
    i had assign production version , done routing and maintain REM profile,
    created material cost with quantity structure ck11n then run the costing in ck40n.
    still getting the error what else is to done to able to book this thru MFBF.

  • Getting Error while doing Control Panel - Windows Update Error code is 80070103

    Getting Error while doing Control Panel -> Windows Update Error code is 80070103. The optional Windows 7 update is
    Microsoft - Other hardware - WinUsb Device
    Please provide your email ID to send the Error screen shot.

    Hi!
    Check the following link to see if it solves your problem:
    http://support.microsoft.com/kb/952032
    Best regards
    Andreas Molin
    Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin

  • Iphone 6 plus - phone opens apps and loses screen sensitivity

    I purchased an Iphone 6 plus 128gb. I have setup the phone and it has a habit of opening random apps, loses keyboard sensitivity and generally does what it wants. Is this an issue with the software, hardware or both. I found my Iphone 5 much more stable. I have completed a full reset to try and sort the issue out but it appears to remain. why does the phone seem to have a mind of its own. It will open apps even when I am not touching the screen.

    I would back it up to iTunes and then restore to factory settings and see if the problem recurs before restoring from back up. If it does then I would bring the phone into an Apple Store for service.

  • Iphone 6 plus podcadt app not working

    TThe ios8 podcast app isn't working on my iPhone 6plus. It crashes continually and hangs on even one download.
    DO I NEED to find a 3rd party app to work?

    Nore wrote:
    I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
    Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
    I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1.  I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
    Are you a developer?  IF so try asking in the developer forum.

  • Square card reader + Verizon iPhone 4s = cannot use app

    I am a cab driver in a capital city in the northeastern US. I got the Square card reader in January, and used it for a while with my Virgin Mobile prepaid android smart phone.  The Square app worked for maybe two weeks, and then I couldn't use it.  At the time I chalked it up to having a crappy android phone.  So I put the square reader away for when I upgraded my phone. 
    Two months ago I ordered my iPhone 4s  through Verizon and reinstalled the Square app on the phone.  For a few weeks, it worked flawlessly.  Then, sometimes I couldn't get an internet signal (according to the fail message) and could not run a credit card.  I question why, because today the app refused to work, two miles from the downtown area of the capital city where I work. Currently, the app is so hit-or-miss, I am lucky if I can get it to work 30% of the time.  I live in a densely populated city in New England with towers everywhere.  Verizon claims to have the best coverage, but this issue makes me wonder.  Other data-requiring apps seem to work okay, and malfunction very little if at all.  Not only do I leave cell data turned on all the time, but I also use a Clear wifi hotspot.  The wifi / 3G icon is always at full strength on the phone when I attempt to use the app.  I ask everyone I know who uses the app and reader, and nobody reports any glitches or issues except for my boss who uses ATT and says he has to be in a really weird, dead location to have the app fail.  Not practically in the center of our city!
    I am super disappointed with the Square app, because it is a great tool for those who accept payments on the job.  The malfunction has cost me money and stressed me out.  I am not sure if it is the phone itself, Verizon, or the Square app causing the problem, which is why I am posting on this forum.  I have already contacted Square and am waiting for their reply.  The phone itself is a joy to use and I would have to say Verizon so far has been satisfactory.  I'm thinking the app is the problem but I am not 100% sure.  Should I uninstall / reinstall the app, or just ditch it and go with a different app?
    Has anyone here experienced this issue?  What other merchant apps can you recommend that are reliable and trustworthy?

        Well badluckwithphones, I hope you can start having some good luck with phones. Since your phone is able to connect to the internet and use other web based applications, it doesn't seem to be an issue with the data connection, but something in the application. Have you tried uninstalling and re-installing the application? Also, make sure to close all of your running applications often http://bit.ly/TomdWF in case something in the background may be causing an issue. If you're still having issues, I would suggest contacting Square again for further troubleshooting on the app.
    MarquiaF_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for