Verizon Palm Treo 700w and Jawbone bluetooth compatibility

I'm having problems pairing this bluetooth with my smartphone. Has anyone else had this problem? Were you able to resolve it? If so, how did you resolve?
Post relates to: Treo 700w (Verizon)

This headset is not compatible with the 700w. I have tested this on the 700w and just cannot get it to work. Here is a link to the 700w compatibility list
http://kb.palm.com/wps/portal/kb/na/treo/700w/verizon/solutions/article/43763_en.html

Similar Messages

Need Help Disabling Phone of Palm Treo 700w!!

Hi all -
I recently bought a cheap, used palm treo 700w to use as a PDA only; I have specific programs that need to run on a windows mobile 5 PDA, and the treo was much cheaper than an ipaq or other handheld device. However, the phone still has the original owner's phone number saved, as well as their pin number. Even though the phone is no longer hooked up to any wireless carrier services, I'm concerned that one of my children is going to pick up the phone and make an emergency call or somehow interfere with the original owner's current phone since the phone number is still saved. Is there a way to completely disable the phone features of the palm treo 700w and still use the PDA, not just "turn off" the phone by pressing the power button but preventing it from being used as a phone completely? Thank you so much!!
Post relates to: Treo 700w (Verizon)

Thank you! That certainly seems to be the one I have, and the age isn't important for what I need. Now, though, that leads to the next issue, which is that I can't sync my contacts and calendar, although I think I've figured out why for myself. Still, it generates another question.
I am currently using Palm v 4.2.1 on my desktop (Mac 10.4.11) I bet it's too new, isn't it? Is it going to be possible for me to back off to Palm 4.0 without losing the information that's currently stored in 4.2.1? I don't mind installing an older version of the software (and I found the download), but if it means losing my information, I'll just pass this free Treo on to some other unsuspecting person.

J2ME for Palm Treo 700W

Hi, does anyone know of a J2ME environment which will work for this Windows Mobile device? Is there an IBM J9 version compatible with this device?

No, not with iSync, as it provides no support whatsoever for Windows Mobile or Pocket PC devices.
To support such devices, you must use a third-party application like the Missing Sync for Windows Mobile from Mark/Space or PocketMac from Information Appliance Associates. Both have promised updates to support Windows Mobile 5 devices like the Palm Treo 700w, but neither have released a completed, updated application to date.
Mark/Space is offering the opportunity to test an early alpha release of the Missing Sync for Windows Mobile. More information about that application is available here:
http://www.markspace.com/testing/MSWM25_alpha.html

Palm Treo 700W Verizon smartphone (cdma)

I was using Palm 700W verizon(cdma) phone in USA, now I have shifted to India and would like to use the phone here, but I am not able to get connection. Is the phone locked if so, how to unlock the phone and use in India
Post relates to: Treo 700w (Verizon)

prasadl wrote:
Hi,
Should I contact the Palm manufacturerer in Sunnyvale, San Jose, do you think they can help me in solving my problem.
What do you think is it advisable.
Post relates to: Treo 700w (Verizon)
That would be fruitless. Palm does not unlock phones, only the carrer can do that!
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

ISync, Palm Treo 650, and my sanity

Just bought a Palm Treo 650 this evening and I'm having the hardest time.
Been trying to iSync via USB with mixed luck. I installed the software that came with the phone, made sure my HotSync settings were correct, and hit the Hotsync button on the USB cable.
Nothing happened for several tries. Was as if the cable was broken as the Palm just couldn't contact the computer and would eventually time out.
Then when I used the AC adapter along with the USB I got a different result. The Palm and Mac were now talking. But it did give me errors regarding the conduits being in conflict. So I changed the settings on some of the conduits and I finally got a successful sync.
Well semi-successful. Some of the stuff didn't seem to be syncing. Like some of my iCal entries. So I found an article showing how to drag some of the conduits to the Disabled folder. Which I did. And now ever since I cannot seem to get the the Palm and Mac to talk again. I get the "Connecting with the desktop using Cradle/Cable" for a while and then the "The connection between your handheld computer and the desktop could not be established. Please check your setup and try again."
Anyone know where I'm going wrong? Would really appreciate some help/advice.

Welcome to Apple Discussions.
There are apparently several issues in play here. So long as you are willing to live the the limitations of the iSync Palm Conduit and synchronize via only one path—either USB or Bluetooth, but not selectively moving back and forth between the two—you can configure iSync to synchronize contact data with the Address Book and calendaring and task data with iCal.
With the exception of non-conflicting conduits like Memos, you will be unable to synchronize at all with the Palm Desktop. [Palm conduits which conflict with iSync are those used by various models to synchronize contacts—Address Conduit and Contact Conduit—those used to synchronize calendars—Calendars Conduit and Datebook Conduit—and those used to synchronize tasks—Tasks Conduit and ToDo Conduit.]
Unless you thoroughly understand how this technology works, it's not a great idea to 'experiment' by moving conduits manually. A properly configured Conduits folder for iSync users should contain at least…
• Apple [the Finder name of the iSync Palm Conduit]
• Backup
• Install
• Memos Conduit [only if you want to continue to synchronize memos to the Palm Desktop]
• any non-conflicting third-party or additional conduits you want to use
Other conduits should reside in the Disabled Conduits folder.
You add a Palm device, either via USB or Bluetooth, using the Enable Palm OS Syncing… option under the Devices menu of iSync. You set the synchronization parameters for your device in the drop-down configuration pane exposed when you press the Tungsten icon in the main window of iSync.
You did the right thing by installing the Palm Desktop software using the bundled CD-ROM that shipped with your Treo 650. But, you should have upgraded that application by applying the Palm Desktop 4.2.1 revision D, available here:
http://www.palm.com/us/support/macintosh/macdesk421revd.html
If you elect to upgrade your copy, just run that installer. Do not attempt to remove any existing components of the Palm Desktop. And keep in mind that though you may not choose to use it at all, its HotSync Manager and Transport Monitor components are critical to the operation of iSync.

Palm Treo 700w can't connect to the Internet

I upgraded my Treo 700w system to version 1.22 and now can't connect to the internet. Pop up window says my setting are correct, but I didn't change them and they appear to be exaclty as they were prior to the upgrade. Suggestions???
m3doc24

thanks, not sure what order of things I tried, but your suggestion was one of them and now I can connect. Now I just have to figure out what the friggin bluetooth connection "passkey" is. Everytime I try to connect to my laptop via bluetooth the phone asks me for the passkey and won't allow me to exit that screen. Even when I initiate the connection from the laptop it asks for the passkey on both ends, but at least on the laptop it gives me the option of NOT entering one unlike the phone which MUST have one. Where the *&*! is the phone's passkey? Any suggestions?
TIA
m3doc24

Palm Treo 700W Iwould like to use mac mail as a pop account, unable to send

I am able to receive mac mail messages on my Verizon Treo 700W, however, I am unable to send. I have the outgoing server set as smtp.vzwmail.com - is this correct?
I get an error of "Unable to connect to the outgoing mail server. Verify that the server name is correct, then try again to send and receive mail."
Any ideas?
20" iMac G5, 17" Powerbook Mac OS X (10.4.3)

You will have to change your outgoing server settings. You will have to get an account at www.vtext.com (if you don't have it already). This will allow you to send mail. The account name will be your phone number [email protected] along with your user name and password. It's free to sign up.

Palm Treo 755P and 7.02 Hotsync Causing Knip Fits . . . .

I decided to update my Palm Desktop SW from version 4.2 to the newest version 6.2 It is running on Windows XP Media Center 2005. Since I have done this (and uninstalled, reinstalled a couple times), the Palm Treo 755P hangs up at the sync of the Datebook (from Dataviz). When I unselect the Datebook conduit, it hangs up on the Address (Contacts). Also, every time Hotsync ends, I get the error that a problem has occurred and the program closes (every time). When I go back over to my other XP machine with Palm 4.2, everything works like a champ again. Can anyone explain why I am experiencing these two types of problems? Thanks in advance. BTW, if there is a thread that is solving these issues, please provide the link.
Post relates to: Treo 755p (Sprint)

It may be a corrupted install of Palm desktop. If you have all your data backed up on another PC and on the Treo, you will need to "clean" uninstall Palm desktop and re-install. I would suggest using 4.x version instead of 6.2. There have been data loss issues with 6.2. This can happen if Palm desktop is open and the PC shuts down, a Windows update happens with Palm desktop open.
During the re-install, skip the sync and finish the install. After the install is complete, change the conduits to handheld overwrites desktop and then sync.
Here are the "clean" uninstall instructions.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to C:\Program Files\Palm or
Palm One. Highlight your Palm Desktop username and right click and copy.
Then go to your PC desktop, right click on a blank spot and select paste.
If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
For Palm desktop 6.2, look in the following location for the folders and files, my documents, PalmOS desktop. You will find the username folder in this location.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer. Like the above folder, delete the Palm folder. Once this is done, you will need to delete some registry keys
from your PC Operating System registry.
Word of warning, going here and deleting the wrong thing can cause your PC
to not start up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This will show them everything
they need to delete. To retain your current Registry settings, we need to do a backup of the Registry.
On the PC, go to start and run type "regedit" without quotes
Highlight MY COMPUTER, go to File --> export. Should pop up with a Save As
box. Current location is fine should be in My Documents or you can change to a location you will remember. In the file name box, type "Regbackup[todaysdate]" i.e. Regbackup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are
you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer
Then reinstall your Palm desktop from the CD and do a hotsync. If it asks
you for a username, enter the name that is on your device in the upper right corner of the hotsync screen.
The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
One other issue that can cause the sync to stop is data corruption. I would suggest scnning the data on the Treo to see if it is corrupted.
There may be database corruption causing the issue. Click on the following link for the program called DbFixiT. This program has a trial version that you can download and install on your Palm OS device. The trial version will scan for database corruption and then report the corruption. You can then find the records causing the problem and fix them yourself or you can purchase the program and have it automatically fix the records.
http://www.pimlicosoftware.com/dbfixit.htm
To install the program, set all conduits to "do nothing" except quick install or install if using Palm desktop 6.2.
After you install the program on the handheld, run the scan and also scan for Blobs in the calendar.
After you clean-up the database on the handheld, set the conduits in hotsync to handheld overwrites desktop and perform a hotsync.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/treo/755p/sprint/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

PALM TREO 700W -SKINS FOR MEDIA PLAYER 10 MOBILE??

ANYONE KNOW WHERE TO GET ANY SKINS FOR FOR THE MEDIA PLAYER??? AND HOW ABOUT TODAY SCREEN THEMES? THANKS EVERYONE =) 160 CHARACTERS IN TEXT FOR MY PALM TREO 700 W IS THERE ANYWAY TO MAKE IT EXCEED 1 PAGE INSTEAD OF HAVING TO SEND THE FIRST 160 CHARACTERS THEN CREATE A NEW MESSAGE FOR THE REST?

If I understand correctly, then the old Outlook 2003 is no longer available to you. If that's the case, then all of your information should have been taken from your local outlook 2003 and put into the new outlook 2007 exchange. The only way you can sync with exchange is by using EAS. You will need the server address, domain name, and the username/password you use to log into outlook. I expect you may not have some of this information, which is where your IT department will be able to fill in the blanks. You won't need to use the Treo for email, but now that outlook 2003 is gone, that isn't an option for your contacts/calendar/notes anymore. When setting up the EAS on your device, it will ask what you want to sync, and you can select/deselect the options you prefer.
Hope this clarifies things a little bit.

Palm Treo 700p and QuickBooks 2009

Before I upgraded to QB 2009 Pro, I used to use QB 2007 Pro and a little program called Time to Time. I also have a Palm Treo 700p (Palm OS) The Time to Time program would interface between QB and the Palm pilot and would allow me to select a customer, start time keeping, document what I did and then I could stop the time. When I hotsync'ed, it would copy the data down to my pc, I ran the Time To Time program to transfer the data straight into QB.
Now after I've upgraded to QB 2009 Pro, my Time to Time program won't work and the company doesn't exist anymore so I'm looking for another program that I can do the same with - keep track of my time, hotsync the data into QB 2009 Pro.
Can anyone suggest anything?
Post relates to: Palm Pilot
Post relates to: Palm Pilot

I have answered your question in the other post you made. Please see the response in that post here;
http://forums.palm.com/palm/board/message?board.id=software&message.id=39583&jump=true

Palm treo 700w

I have a treo 700w that I used with verizon wireless. I recently switched to At&t because of better coverage. I understand that the two systems are different. Can the treo 700w be reprogrammed to be used on the at&t system?
Post relates to: Treo 700w (Verizon)

as far as i know, verizon is using CDMA network while ATT is using GSM network. so it's impossible for the CDMA units to work GSM networks or vice versa.
Post relates to: Treo 680 (Unlocked GSM)

Separate Palm desktop installs for Palm M505 and its apps and Palm Treo 680 and its apps on same Windows XP computer?

Hello:
I'm trying to do a workaround. I've got a Palm M505 that has a terrific keyboard that hooks up to it. This lets me write documents in a very portable way. The Treo 680 never had the equivalent, really full-sized external keyboard made compatible with it. So, I want to create documents on the M505 but otherwise mostly use the Treo 680.
Here's the rub. When I tried to sync both devices to my Palm Desktop version 4.1.2 for Windows XP, it didn't work. Hotsync tries to synchronize apps that won't work on the M505. Also, the versions of Documents to Go are very different (5.x versus 8.x).
I would love to have a separate Palm Desktop installation for each device, so I can have a nice desktop environment for each by launching them separately. But, the Palm Desktop installation "wizard" shuts down and won't give me the opportunity to do a separate Desktop install.
Any ideas other than buying an ultra-small laptop and dropping this kludgy scheme? For instance, if I were to copy the installed files from one directory to another, would this work, or would it not be set up in the Registry?
Thanks!
Post relates to: Treo 680 (Cingular)
This question was solved.
View Solution.

Okay. Stubbornness pays off! I was able to beam documents between my Palm M505 and Treo 680, avoiding the need for complicated syncing of both Palms to my laptop machine. I was also able to beam documents from both Palms to my Dell Inspiron M300 laptop, running Windows XP Pro.
When beaming between Palm devices, the results were better. In the M505, Documents to Go version 5.004 doesn't translate documents into Microsoft Word format but into something it calls Word to Go. The Treo has DTG version 8.003, which is able to read files in Word to Go format and save in native Microsoft Word for Windows format.
However, even when beaming a Word to Go (old format) document directly onto the Desktop of my Windows XP machine, it gave me a document I could open, with the text I'd input following a bunch of characters Word obviously didn't understand. If I add the file from my desktop to the newer Documents to Go version on my laptop, I expect it will translate it into a Word file when it syncs to the Treo but haven't tested that. In either case, beaming between Palm devices is the easiest solution and completely solves the problem.
For any readers who are interested, the reason I've so stubbornly tried to solve this problem is that I'm a fast touch typist. My old Palm M505 plugs directly into a wonderful, old Palm Portable Keyboard that is full-sized. Because it's a hard-wired connection, I can type fast. That old keyboard compresses into the same folded footprint as some new foldover external keyboards. It does this even though much bigger by folding in an accordian-like fashion, with four flat surfaces folder together. That keyboard design now exists in some of the keyboards sold by IGo corporation (their old name for it was Sierra Stowaway Bluetooth Keyboard). But, they were unable to figure out how to handshake their Bluetooth with the odd Bluetooth configuation in the Treo 680. Why Palm made the Bluetooth library different in the Treo 680 from other Treos is a mystery to me, but enough of this tangent. Some interested in this workaround may be curious for similar reasons.
Post relates to: Treo 680 (Cingular)

New Palm Treo 850 and New HP Laptop, WIndows 7

I have Microsoft Outlook 7 and would like to know where to begin sync between this and my new phone. I need detailed instructions.
Post relates to: Treo Pro T850 (Sprint)

Hello Clnked and welcome to the Palm forums.
For Windows 7 and Office 2007, you will need to use Microsoft's Windows Mobile Device Center software. You can learn more about it, and how to install it, on the Microsoft website.
Alan G

How can i trasfer mp3 files from compuer (widows xp service pack 2 ) to my palm treo 680 and how can i set that mp3 songs as a ringtones for my palm treo 680?

i just syncronize my palm 680 with my computer.now i want to tranfer mp3 files to my palm mobile without using sd card or windows media player.i treid to use windows media player 9 for tranfering files but it didn't show anything to me .what can i do right now?please help me out.
thanks
nazia
Post relates to: Palm TX

Connect your device via usb cable to your computer do not hot sync. Start Ptunes and wait until they connect. You will get a list of things you can do on your computer. It self explanatory from there. You must sync the 2 devices in WMP or what ever player you have on your computer.
As for the ringtones there are several thread explaning what you want to do try this one around page 13,14 or 15 it will explain how to do it without an sd card. http://forums.palm.com/palm/board/message?board.id=video_and_photo&thread.id=4395
Ps the thread is says its about Centros but it will work the same on your 680
Message Edited by rsbas on 09-08-2009 05:44 PM
Message Edited by rsbas on 09-08-2009 05:45 PM

How do I transfer contacts from palm treo 700w to my macbook?

I really need to move my contacts from my treo to my new mac and eventually put them on my iphone. I'm a newbie and would really appreciate some help figuring this out. Thanks

Use the Missing Sync for Windows Mobile from markspace.com

Verizon Palm Treo 700w and Jawbone bluetooth compatibility

Similar Messages

Maybe you are looking for