Verizon pulls out of zip code 49636

What recourse do I have if Verizon decided to shut down service to a tower that I use in zip code 49636?
I've been having problems with their on/off service since September 2010 and since purchased numerous new Droid phones, a new wireless card for my laptop. After multiple calls to their technical support over the last 8 months, all problems eventually got resolved by updated PRL updates, being taken off Hybrid mode, etc. Now NONE of my 5 phones or my wireless card, or my wifes phone and card or anyone else with Verizon has service.
5 calls into Technical Suport at Verizon and I finally got one guy (Zack) to tell me straight they pulled out service from their downtown Glen Arbor, MI tower and there is nothing they can do.
Am I simply screwed with no service? Can we get them to re-install service at their State Street tower? I can see the darn thing from my home, but "no service available".
Thank you in advance for your help. Had I known this none of the 5 phone on my plan (or my wireless card) would have been renewed.

You should have had at least had extended network available.
Can you go to a location that Verizon remained and update your phone with the programming *228, option 1 and then option 2.
If ATT truly did shutdown the towers (I agree with Budone that they shouldn't have done so.), you won't be able to program with *228 in an area without native Verizon towers.
The Alltel assets in the area may not have begun the process to rebrand into Verizon yet. They have to wait until ATT has finished their transition completely.
I have noticed that zipcodes in my area that were sold to ATT no longer go to the transition website when I try and use those zipcodes as my home area on the Verizon website. Based on that, they might be moving into the next step and should be starting the rebranding process in the next few months.

Similar Messages

How to Pull out single common T-code from the existing User's profiles.

Hi experts,
Here in my company we are using 4.7 Enterprise with 230 users.
recently management decided to pull out authorization for one Common T-code assigned to 100 people in their profiles.
we had created customized profile for each user.
So, here i had 100 profiles. i need pull out one common T-code assigned in all these 100 profiles.
not only in this 100 profiles, i want to remove for all customized profiles in my SAP PRD server.
request you to more inputs concerned to this.
Thanking you in anticipation,
best regards,
Raghav

I agree with Alex that shows again that roles per user is NOT best practice.
Best practice design:
1.     Let the functional process designers describe the whole process on TRX Level.
2.     Let business decide which part of the process is to be done by which user.
3.     Split the process in point 1 in such a way the you can mach every user in step 2. In this try to avoid a single TRX to be in more than one single role.
4.     Create roles for the part process in 3 and assign to users (if the number of roles per user is making it hard to maintain, you can decide to create Composite roles).
If you would have followed steps aforementioned you would have to remove the TRX from one role ONLY!
I would suggest to find time to make a redesign, It will definitely pay-back in far less maintenance.

How to stop Lollipop update on Verizon Note 4 once it started by mistake & I pulled out battery?

My Note 4 Lollipop update started automatically so I pulled out the battery to stop it.. That didn't work after I put the battery back in.. So I pulled the battery out again hoping someone would have an answer.. Is there any way I can stop it as I've been so careful not to update and every update over the years has resulted in a disaster and Verizon blames Google or Samsung and Google or Samsung blame each other.. All the while Verizon keeps charging $50mo at least for a smartphone.. I suffered with an update 2yrs ago and they ignored me and other users.. Try setting your fonts to huge and it's only 1/64" at best.

Once it has started, it will continue until done. There really is no stopping it no matter what you do if it has already begun.

How to find out my verizon account number and pass code?

Recently I tried to port one Verizon prepaid cellphone number to another carrier. During the porting the carrier asked me to provide the Verizon account number and pass code. How can I get this info?
Thanks.

Just as SuzyQ stated, Verizon Prepaid account numbers should be your mobile number, and as for the passcode, unless changed should be the last 4 digits of your mobile number. If you need more assistance give customer service a call.

Verizon wiped out my calendar after I called about sluggishness

I have been having problems with my sluggish Curve 8330, particularly with BlackBerry Messenger and appearing as if I am off-line to my contacts when I am not. And, I will often send messages and it takes a minute or two to be marked as delivered.
So, I called Verizon Wireless, who sent me a "service book" whatever that is. And, when I did a battery pull, my calendar was wiped out. Tech support blamed it on a memory problem, but I over 35,000,000 bytes free.
We tried a one-way sync from Outlook to Device to restore the calendar. Everything appeared to be working in the Device Manager. But, it didn't restore my calendar on the device. The only events that show on the device are events that I "invited" my husband to so he can add the events to his BlackBerry.
Verizon wants me to start all over and restore my BlackBerry, but I want to be sure I try everything before I wipe it out. Any suggestions would be helpful.

byebyeverizon123,
I want to make sure that you are up and running with phone calls on your cell phone. Let's get right to work. What zip code are you in? As Ann154 stated, are you up to date with the latest software for the iPhone 6? Are you still able to send/receive text messages? When you try to call out, are you getting any kind of error message or is it just dead air? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

No longer get a Signal. My zip code is 32421 in NW Florida

My zip code is 32421 in NW Florida, Just about the middle of the map, just below Interstate 10. I have been with Verizon since it took a portion of ALLTEL, was with Alltel since they took over another company and was with that company when they took over one. I have not personally changed providers in at least 15 years or more. My problem now is that my signal strength has become almost nonexistent where I have always been all these years. It seems like the fall of 2013 I had good signal but it started dropping. I finally change from a Motorola Maxx (I think it was) and now my wife has a Samsung Galaxy S3 and I have the S4. The other 2 phones on our contract (grandkids) both Apple 4's have the same problem. My son and his wife, who live next door and with Verizon also have the same problem and timeline. It is like a tower(s) have been out of commission for a while. My phone roams at times while in the house. If I have my phone set to announce when it loses the network or regains the network, it became to irritating to have to hear it. At one point we could almost use our cell phones exclusively at home. Now we are bound to landlines. I've never had any problem with Verizon but have become quite upset during the last 6 months to the point of trying something different when our contract expires. We are no longer getting the service we were getting with earlier contracts. Please help. Tell us what we can do or what Verizon is going to do to check this out.

The signal is ever so slightly higher outside as would be expected, but still not high enough, often enough to be depended on. In fact it is more prone to roam when stepping out of the house than inside. I have to drive several miles Northwest (approximately 7 miles) towards the intersection of Interstate 10 and SR 71 in the panhandle of Florida, just south of the town, Marianna. When heading east on SR 286 from SR69, through the Ochessee area to I-10 and then heading east for about 10 miles from the Apalachicola River are several dropout areas of low to no signal, but since we're moving it is for a very brief period of time. Getting back to my house though, the service that I had as late as last summer, both inside and out, has significantly declined. Just based on my driving from my house, it seems that a tower North of me has dropped. You can find these roads on Google maps, in fact you can find them by zooming in on the Verizon Coverage map, find Tallahassee in North Florida and follow Interstate 10 to the west for about 50 miles. The problem seems to be from SR 286 to SR 69 then to SR71. Along a stretch about 17 miles south of Interstate 10 in between these 3 intersections is where the problem seem most prevalent.
I'm not sure what you meant by follow and send a private message. The only option I see for me is "Reply". Please excuse my ignorance.

Query to pull out Vendor details with AP invoice

Hi all
I have made the following query to pull out the following data
House Bank Account, Customer/Vendor Name,Payment Method code,Default Account,Default Branch,Default bank Internal id,
Document NUmber,Customer/Vendor Ref No,Row Total,Item/Service description,Branch,Street
SELECT T0.[HousBnkAct], T1.[CardName], T0.[PymCode], T0.[DflAccount],T0.[DflBranch], T0.[BankCtlKey], T1.[DocNum],T1.[NumAtCard], T2.[LineTotal], T2.[Dscription], T3.[Branch], T3.[Street] FROM OCRD T0 INNER JOIN OPCH T1 ON T0.CardCode = T1.CardCode INNER JOIN PCH1 T2 ON T1.DocEntry = T2.DocEntry INNER JOIN DSC1 T3 ON T0.HousActKey = T3.AbsEntry WHERE T1.[DocDate] >=[%0] AND T1.[DocDate] <=[%1] AND T1.[DocStatus] = 'o' AND T0.[PymCode] = 'EFT'
But i have observed that i am not getting all the customers in this query where the invoice is open, it displays only few records.
Regards
Farheen

Hi Farheen......
Please try this........
SELECT T0.HousBnkAct, T1.CardName, T0.PymCode, T0.DflAccount,
T0.DflBranch, T0.BankCtlKey, T1.DocNum,T1.NumAtCard, T2.LineTotal, T2.Dscription,
T3.Branch, T3.Street FROM OCRD T0 LEFT JOIN OPCH T1 ON T0.CardCode = T1.CardCode
LEFT JOIN PCH1 T2 ON T1.DocEntry = T2.DocEntry LEFT JOIN DSC1 T3 ON
T0.HousActKey = T3.AbsEntry WHERE T1.DocDate >='[%0]' AND T1.DocDate <='[%1]' AND T1.DocStatus = 'o' AND T0.PymCode = 'EFT'
Regards,
Rahul

How do I show multiple rollover images on a page inserted dynamically (pulled out of a sql database

How do I show multiple rollover images on a page inserted dynamically (pulled out of a sql database table) using Dreamweaver’s Repeat Region. Example: I have different products each one associated (through their productID) with two images (one that’s showing in the page and one for the rollover effect) that are pulled from a database using Dreamweaver’s Recordset. So I want to end up with a page containing row after row of images(one for every product).When moused over each image will reveal the second (rollover) image for the same product which in turn can be a link(the image itself ) that when clicked leads to a detailed page with more information about the product the image is associated with. To show row after row with images for the different products in the database table I am using Dreamweaver’s Insert Rollover Image command and then the Repeat Region – I have no problem to complete the steps, to insert the image and the rollover one at once and set the paths so they are pulled dynamically depending on the productID they are associated with .I have also no problem to apply the Repeat Region so not only the first image associated with the first product in the table is shown but all of them-a routine and standard procedure when using the Repeat Region to dynamically generate and display multiple rows of data. However, when I preview the page the rollover effect is lost –the images are shown but when moused over the second image does not show. The problem is caused when the Repeat Region is applied-once again I am allowed to apply it but the rollover stops working, a kind of interference. ANY SOLLUTION PLEASE, ANY WORK AROUND.

I gotta tell you, using multiple images for rollover effects is going to be a big challenge in your dynamic scenario.
If this were my product page, I would use thumbnails with a bit of CSS opacity or filters to desaturate and make them full opacity/color on mouse over. Nice effect with much less bandwidth. Easily done globally with CSS code.
Two examples:
http://alt-web.com/GALLERY/GalleryTest.php
http://alt-web.com/TEMPLATES/CSS-Semi-liq-photo-sheet.shtml
Nancy O.

Apple ID billing information continually adds additional digits to my zip code. This causes my credit card to be invalid, how do I fix this?

As the title says, when I try to update my billing information the software adds additional digits to my zip code. This is all fine and dandy, it matches to where I live. But my bank only uses the standard five digits and when it adds the additional digits they will not match up correctly despite the first five being matched. This causes an endless and stupidly frustrating cycle that I cannot solve. I tried to find a phone number to call and sort this out but of course that doesn't exist. Any help would be great.

Hi ...
Might be something here > iTunes Store: My credit card's security code or zip code does not match my bank's records
And you can explain the situation to Apple here > Apple - Support - Mac App Store - Contact Support
BTW, billing policy is the same for the iTunes and the Mac App Stores.

Using AJAX to load city, state, metro area based on zip code

I'm new to getting APEX to work with AJAX properly. I've been reading some tutorials and trying to apply what they do to my situation, but I'm running into a problem. I have a text field item for zip code. What I want to happen is that when someone enters in a zip code, I want to use AJAX to populate 3 different select lists (1 each for state, city, and metro area) and to populate a checkbox (of neighborhoods based on the zip code as well). I'm looking at the examples in:
http://www.oraclealchemist.com/wp-content/uploads/2006/11/s281946.pdf
and
http://apex.oracle.com/pls/otn/f?p=11933:63
But they all use examples where the value of a text field item is used to populate 1 select list. I can't figure out how to apply that methodology to populate 3 select lists and 1 checkbox item. I've got all my SELECT statements written to populate these fields based on the value of the zip code text field item, but don't know how to convert what I already have to use AJAX.
Here are my SELECT statements:
P2805_STATE lov:
===========================================================================================
SELECT INITCAP(GEO_DATA_STATE.STATEFULLNAME) d,GEO_DATA_STATE.STATE v
FROM GEO_DATA_STATE, GEO_DATA_ZIP
WHERE isPrimary = 'P' and
trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
ORDER BY STATEFULLNAME
P2805_CITY lov:
===========================================================================================
SELECT UNIQUE (INITCAP(GEO_DATA_CITY.CITY)) d,GEO_DATA_CITY.CITY v
FROM GEO_DATA_STATE, GEO_DATA_ZIP, GEO_DATA_CITY
WHERE
trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
trim(upper(GEO_DATA_ZIP.CITY)) = trim(upper(GEO_DATA_CITY.CITY)) and
GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
ORDER BY GEO_DATA_CITY.CITY
P2805_METRO_AREA lov:
===========================================================================================
SELECT UNIQUE (INITCAP(GEO_DATA_METRO.METRO_AREA)) d,GEO_DATA_METRO.CODE v
FROM GEO_DATA_STATE, GEO_DATA_ZIP, GEO_DATA_METRO
WHERE
trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
trim(upper(GEO_DATA_ZIP.METROCODE)) = trim(upper(GEO_DATA_METRO.CODE)) and
GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
ORDER BY 1
P2805_NEIGHBORHOOD lov:
===========================================================================================
SELECT UNIQUE (INITCAP(GEO_DATA_HOOD.HOOD)) d,GEO_DATA_HOOD.HOOD v
FROM GEO_DATA_STATE, GEO_DATA_ZIP, GEO_DATA_METRO, GEO_DATA_HOOD
WHERE
trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
trim(upper(GEO_DATA_ZIP.METROCODE)) = trim(upper(GEO_DATA_METRO.CODE)) and
GEO_DATA_HOOD.METRO_CODE = GEO_DATA_METRO.CODE and
GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
ORDER BY 1Do all these statements need to go in 1 on-demand process? Where do I go from here?

Andy, cool. This is starting to make more sense. THANKS A BUNCH! OK. I've gone ahead and modified the on demand process to suit my needs, so I have:
begin
owa_util.mime_header('text/xml', FALSE );
htp.p('Cache-Control: no-cache');
htp.p('Pragma: no-cache');
owa_util.http_header_close;
-- Building States list
htp.prn('<SELECT>');
FOR i in (
    SELECT INITCAP(GEO_DATA_STATE.STATEFULLNAME) d, GEO_DATA_STATE.STATE v
    FROM GEO_DATA_STATE, GEO_DATA_ZIP
    WHERE isPrimary = 'P' and
    trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
    GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
    ORDER BY STATEFULLNAME
LOOP
    htp.prn('<OPTION VALUE=''' || i.v || '''>' || i.d || '</OPTION>');
END LOOP;
htp.prn('</SELECT>');
-- Building Cities list
htp.prn('<SELECT>');
FOR i in (
    SELECT UNIQUE (INITCAP(GEO_DATA_CITY.CITY)) d, GEO_DATA_CITY.CITY v
    FROM GEO_DATA_STATE, GEO_DATA_ZIP, GEO_DATA_CITY
    WHERE
    trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
    trim(upper(GEO_DATA_ZIP.CITY)) = trim(upper(GEO_DATA_CITY.CITY)) and
    GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
    ORDER BY GEO_DATA_CITY.CITY
LOOP
    htp.prn('<OPTION VALUE=''' || i.v || '''>' || i.d || '</OPTION>');
END LOOP;
htp.prn('</SELECT>');
-- Building Metro Area list
htp.prn('<SELECT>');
FOR i in (
    SELECT UNIQUE (INITCAP(GEO_DATA_METRO.METRO_AREA)) d, GEO_DATA_METRO.CODE v
    FROM GEO_DATA_STATE, GEO_DATA_ZIP, GEO_DATA_METRO
    WHERE
    trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
    trim(upper(GEO_DATA_ZIP.METROCODE)) = trim(upper(GEO_DATA_METRO.CODE)) and
    GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
    ORDER BY 1
LOOP
    htp.prn('<OPTION VALUE=''' || i.v || '''>' || i.d || '</OPTION>');
END LOOP;
htp.prn('</SELECT>');
-- Building Neighborhood list
htp.prn('<SELECT>');
FOR i in (
    SELECT UNIQUE (INITCAP(GEO_DATA_HOOD.HOOD)) d, GEO_DATA_HOOD.HOOD v
    FROM GEO_DATA_STATE, GEO_DATA_ZIP, GEO_DATA_METRO, GEO_DATA_HOOD
    WHERE
    trim(upper(GEO_DATA_ZIP.STATE)) = trim(upper(GEO_DATA_STATE.STATE)) and
    trim(upper(GEO_DATA_ZIP.METROCODE)) = trim(upper(GEO_DATA_METRO.CODE)) and
    GEO_DATA_HOOD.METRO_CODE = GEO_DATA_METRO.CODE and
    GEO_DATA_ZIP.ZIPCODE = :P2805_ZIPCODE
    ORDER BY 1
LOOP
    htp.prn('<OPTION VALUE=''' || i.v || '''>' || i.d || '</OPTION>');
END LOOP;
htp.prn('</SELECT>');
end;It doesn't look like I would have to modify the appendToSelect function at all, correct? Is the checkbox that I need to populate handled the same way as these select lists? And it seems like I only need to make the 2 changes that you mentioned to get_AJAX_SELECT_XML function, right? So my javascript function should be like:
<script language="JavaScript1.1" type="text/javascript">
function get_AJAX_SELECT_XML(pThis,pSelect1,pSelect2,pSelect3,pSelect4){
if (document.getElementById('P2805_ZIPCODE').value.length == 5)
     var l_Return = null;
     var l_Select1 = $x(pSelect1);
     var l_Select2 = $x(pSelect2);
     var l_Select3 = $x(pSelect3);
     var l_Select4 = $x(pSelect4);
     var get = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=otn_Select_XML',0);
     get.add('TEMPORARY_ITEM',pThis.value);
     gReturn = get.get('XML');
     var sels = gReturn.getElementsByTagName("select");
     if(gReturn && l_Select1){
          var l_Count = sels[0].getElementsByTagName("option").length;
          l_Select1.length = 0;
          for(var i=0;i<l_Count;i++){
               var l_Opt_Xml = sels[0].getElementsByTagName("option");
               appendToSelect(l_Select1, l_Opt_Xml.getAttribute('value'), l_Opt_Xml.firstChild.nodeValue)
     if(gReturn && l_Select2){
          var l_Count = sels[1].getElementsByTagName("option").length;
          l_Select2.length = 0;
          for(var i=0;i<l_Count;i++){
               var l_Opt_Xml = sels[1].getElementsByTagName("option")[i];
               appendToSelect(l_Select2, l_Opt_Xml.getAttribute('value'), l_Opt_Xml.firstChild.nodeValue)
     if(gReturn && l_Select3){
          var l_Count = sels[2].getElementsByTagName("option").length;
          l_Select3.length = 0;
          for(var i=0;i<l_Count;i++){
               var l_Opt_Xml = sels[2].getElementsByTagName("option")[i];
               appendToSelect(l_Select3, l_Opt_Xml.getAttribute('value'), l_Opt_Xml.firstChild.nodeValue)
     if(gReturn && l_Select4){
          var l_Count = sels[3].getElementsByTagName("option").length;
          l_Select4.length = 0;
          for(var i=0;i<l_Count;i++){
               var l_Opt_Xml = sels[3].getElementsByTagName("option")[i];
               appendToSelect(l_Select4, l_Opt_Xml.getAttribute('value'), l_Opt_Xml.firstChild.nodeValue)
     get = null;
</script>
And then since all 4 items (3 select lists and 1 checkbox item) are populated based on the value inputted in the text field item, I would only need to add the following to the html form element attribute of my text field item, right?
onKeyUp="javascript:get_AJAX_SELECT_XML(this,'P2805_STATE','P2805_CITY','P2805_METRO_AREA','P2805_NEIGHBORHOOD');"Denes, thanks for the example. It seems like what I need to do is somewhere inbetween what you have and what's in the example on http://apex.oracle.com/pls/otn/f?p=11933:37. I have 3 select lists and 1 checkbox item that should all be populate depending on the value entered for the text item. Do I still need to split everything up then into a function and an on demand process for each select list and checkbox?

How do I display an invalid zip code in a summary table

On my airshow website we have a feedback form, one of the questions is the zipcode where the visitor came from. This works fine. The summary results tab includes a lookup for the zipcode where I show the city associated with the zipcode and then how many responses came from that zipcode. This can be seen here http://www.hollisterairshow.com/feedback-results.php?tab=7
In testing, I found that an invalid zipcode is not displayed in the summary table, although it is counted in the total number of responses. I'd like to display the invalid zipcode and leave the City blank, or maybe put "Invalid zip code". The current code is displayed below, it's beyond my ability to figure out how I should change it to display invalid zipcodes and I'd really appreciate some direction on this.
I know I could validate the zipcode on entry but it's quite possible the zipcode table I have is out of date and i can't find a free downloadable list, so I'm thinking anything invalid could cause me to update my table.which is fine.
Thanks for any assistance.
Tony
<div class="TabbedPanelsContent">
<?php
// Make a MySQL Connection
$query = "SELECT feedback.zip, COUNT(feedback.zip), zipcodes.citystate FROM feedback, zipcodes WHERE feedback.zip = zipcodes.zipcode GROUP BY feedback.zip";
$result = mysql_query($query) or die(mysql_error());
// Print out result
while($row = mysql_fetch_array($result))
echo $row['zip']. " ". $row['COUNT(feedback.zip)']. " ". $row['citystate'];
echo "<br />";
?>
</div>

Use an outer join on the two tables so that results are returned for all feedback rows, instead of just matching rows. The column zipcodes.citystate will be NULL. In your recordset output, you can test for null in the column and populate it with "Invalid Zipcode" if you want.
You'll need to move the join to the FROM clause as I believe that MySQL does not support outer joins in the WHERE clause like most other DBMS's.

Zip code entry problem

On some websites there is a field requesting a 5 digit zip code. When I type the zip code into the field all 5 digits show--- when I tab to the next field, one of the zip code digits drops out (either first or last) and leaves only 4 digits. The information is returned as incorrect and asks (again) for a 5 digit zip code. What to do ???

I had this problem for a while using Safari to enter ZIP codes into some forms -- but only when the ZIP code started with (at least one) zero. The work-around was to use MS IE for Mac (which I hear is still available, just no longer supported) for those sites. It's probably worth trying FireFox, too.
I don't know whether the real problem is in Safari or in the web sites -- the same version of Safari worked on some sites but not others, so I suspect that the problem lies with the FORM definitions on the affected sites, in which case the real fix would be to convince the site designers to fix their forms.

Serious service failure in zip code 70119 / 70122 at the New Orleans Jazz Fest Weekend 1

I experienced total service failure in zip code 70119 & 70122 at the New Orleans Jazz Fest. No send / receive of data, voice or text. I use an iPhone 5s running the latest OS. I had better service during all hurricanes, except Katrina, of course. The only evidence I have of this are screenshots of pinwheeling texts and Facebook posts. Oh, and I have a very ****** off wife for not being able to contact me. This was a first, but it was a weekend-long frustrating affair. Please address this before next weekend's Jazzfest. I'm not the only Verizon customer pinwheeling.

I experienced total service failure in zip code 70119 & 70122 at the New Orleans Jazz Fest. No send / receive of data, voice or text. I use an iPhone 5s running the latest OS. I had better service during all hurricanes, except Katrina, of course. The only evidence I have of this are screenshots of pinwheeling texts and Facebook posts. Oh, and I have a very ****** off wife for not being able to contact me. This was a first, but it was a weekend-long frustrating affair. Please address this before next weekend's Jazzfest. I'm not the only Verizon customer pinwheeling.

Zip code input to return location

I am wondering if there is a spry tool that I can use. I want
the user to input one of about 50 zip codes in my area and then
based on that input, return one of 3 locations(address).
TIA,
Bill

If you're in the USA and your server supports PHP -
A to Z store locator is fairly easy to work with:
www.php4script.com/store-locator-script/
Other flavors and zip code support can be found at HotScripts
www.hotscripts.com/PHP/Scripts_and_Programs/Zip_Code_Locators/index.html
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"Brhaynes75" <[email protected]> wrote in
message
news:fc4cc8$dkt$[email protected]..
> I am developing a website that requires me to have a
store locator that
can
> return a list of results based off the user's zip code
submission. Can
anyone
> point me in the right direction?
>
> If there are solutions out there that can be purchased,
if the product is
> good, I will do that as well.
>
> Thanks in advance.
>
>
>

Leading zeros for zip codes in Numbers

I couldn't find an answer for this question but finally figured it out so wanted to share. Here's how I got the zeros to show in my zip code column:
You can make a custom cell format from the cells palette. You have to hide the separator and add a digit using the Integers bubble. Then choose show zeros for unused digits.
Then apply this format to the entire zip code column in your doc.

I was having the same problem. You pointed me in the right direction but in 09 the prompts are slightly different.. Hilight the column. In the cell inspector, cell format, choose NUMERICAL SYSTEM and set the number of places to five.
It should now look right but before you save it, create a new column and format it as above into TEXT. Then copy the one you've fixed, and paste it into the new text column. This should save fine as cvs in any event, as well as numbers.

Verizon pulls out of zip code 49636

Similar Messages

Maybe you are looking for