Verizon Quantum Gateway has conflict with Airport Express

Does anyone have a problem with the Verizon Quantum Gateway in conflict with the Airport Express.

ranamaska wrote:
Can you tell me exactly how to do this?
Or
Should Verizon have this instruction for me to find?
Just ignore the verizon.. it really should not be a major issue.
If you are having problems fixing the channels in one router should then solve the problem by forcing the other router to use different channels.
I cannot tell you how to fix the verizon anyway as I have no idea what it is nor can i get one to play with.
Anyhow reset the Express to factory and start over.. the utility get it right most of the time.. and all you need to do is tweak the values.
I strongly recommend you use all short names, no spaces and pure alphanumerics.. password the same but 8-20 characters.
So do the setup with Express WAN port plugged into the LAN port of the Verizon router.
When you are finished.. click on the Express in the airport utility and click on Edit.. I don't have an express but the setup is identical for my Time Capsule.
When you click edit you will get the full manual setup.
Looks like this.. first tab is Base Station where you set name and password.
Go to the Network tab.. it must be bridged.
Go to the Wireless Tab. And you must Create a wireless network..
Down the bottom of that page is wireless options.. (sorry I cut it off in the screenshot).
This allows you to set a different name for 5ghz.. up to you.. I prefer doing this but it is perfectly fine not to.
At the bottom it shows wireless channels are set to automatic.
Click that and fix it ..
Here is my actual current setup.
Once you complete this setup.. you can reboot the Verizon modem router.. that will give it a chance then to reset its wireless and you should then be able to clearly see what is happening..
Use the tools apple has given you .. in Mac OS since Mountain Lion an excellent wireless survey program is built in.
About Wireless Diagnostics - Apple Support
Start the utility and do a scan and then you will see all the channels and signal levels you have available in the area.
You can also check the performance of the link you are using.

Similar Messages

Conflicts with Airport Express and Time Capsule

I am using Airport Express and Time Capsule at the same time. Connection to the web is via a router. Very often I do have conflicts. How shall I connect the gadgets? At the moment I connect the router to Airport Express (network cable).
Time machine back up doesn't work properly.
Is there anybody able to help me?
Regards

What broadband type do you have?
It can be impossible to plug a TC into the existing connection because the virgin media router has special setup or logins which are not revealed to end users.
If it is a fibre connection for instance the TC may simply not work. They have issues with many fibre ISP putting the gateway address outside the subnet of the main public IP.. (don't worry if it is too technical .. it amounts to .. it don't work! )
You may need to wait until Sat.
Get in a big supply of home videos or something and try and starve off your addiction.

Windows 7 conflict with airport express 2nd generation

My airport express (2nd generation) is losing it's wifi connection with my router after being connected for an hour or so. It was worse (happened faster) until I made some setting changes. Here is the current config and purpose of what I am trying to accomplish...
Goal - Connect my son's new gamer computer that is running windows 7 professional to the internet
Config -
1. Airport is set up to connect to an existing wireless network that uses WPA/WPA2 Personal security
2. Ethernet cord is plugged into the ethernet slot in the back of the airport and runs to the ethernet slot on the computer.
Once the connection is lost, all you have to do is unplug and re plug in the airport and the light goes green and all is good for a little bit.
Yes, I have unplugged, disconnected and reconnected the router, too after making changes.
Any help would be greatly appreciated.

iTunes: Troubleshooting AirPlay and AirPlay Mirroring
About AirPlay Mirroring in OS X
For AirPlay Display (video) to work, check if the checkbox at System Preferences -> Displays.
For AirPlay (sound) like iTunes, check if the device shows up...
If you have Firewall turned on the Mac, check if Bonjour ports are open.

Time Capsule adress conflict with Airport Express

Hello, hope someone can help me out. I have a small network at home, using the Airport Express as wireless base station connected to my DSL modem. Both iMac and iBook can connect and I can play my iTunes over the network to my stereo.
Bought a Time Capsule and tried to get it to work. In the setup menu I have chosen it to operate in my network. The timecapsule will reboot but then I get a message that it has in incorrect network adress and from that moment on the TC stays invisible. Now I can see in the setup program that the TC is trying to use 10.0.0.1 as network adress. I haven't got a clue how to change that adress and into what it should be changed.
As for now I have connected my TC to my iMac using a 10 m ethernet cable, but that is a bit boring. I would like to have it operating wireless. Next to this I would like to keep using my AX to play my music to the stereo and use the USB printer connected to the TC or the AX
Who can help me out?

You should use the Manual Setup option from the AirPort Utility so that you will be afforded the maximum configuration options.
See this link for instructions:
http://manuals.info.apple.com/en/DesigningAirPort_Networks10.5-Windows.pdf

Macbook has Problems with Airport Express newtork

I am using an Airport Express at home. I have my 20" iMac (OS 10.4.11) connected to the network with no problems. When I try to access the network with my Macbook (OS 10.4.10) I have all kinds of problems: I often can not find the network, when I do get onto the I get really slow download speeds (~3 mins for a web page), after waking the Macbook from sleep it can not find the network unless I restart. I even have these problems when the Macbook is right next to the airport (< 1 m).
I don't believe it is a problem with the Airport because my iMac connects perfectly from about 4 m away through the floor.
I don't believe it is the Macbook per se because I can connect to any open network without problems.
It seems to be the odd combination of the Macbook with the Airport.
Does anyone have any suggestions for addressing this issue?
Thanks in advance.

Network
Plug the AE next to the PLC and connect it to the Ethernet port of the PLC. Configure the AE to operate in bridge mode. If your PLC doesn't offer an Ethernet port, use one like the Netgear XAVN2001. If it's already taken, you will need a 4 port switch. You will also need a long 3.5mm audio cable if the amp is not in the proximity of the PLC, available from Amazon for under $5. Finally, create a separate wireless network on the AE.
Client
Connect the client to the AE's wireless network, not your existing network. The client in this case is an iPxd or other computer with iTunes or Airplay/similar PC.
The above basic configuration works flawlessly in my experience. If the Client is to distant from the AE's wireless, you can, as a second step, connect it to your existing network, but be forewarned that in this scenario dropouts abound and the AE frequently disappears from view.

How do i use my time capsule and extend the network with airport express

I have a new iMac and Time Capsule, how do i extend the network with airport express. My time capsule does have a guest net work, and logins and passwords? I am no computer person. So for me it would have to be spelled out.

Use the search as this has been done to death ..
Bob Timmons is the expert on this.. look at his answers here.
https://discussions.apple.com/thread/4274187?start=0&tstart=0
https://discussions.apple.com/message/21856077#21856077
This has been automated in the v6 utility. I am used to doing it manually in v5 utility which is also fairly easy.
Apple doco is also good to read.
http://support.apple.com/kb/HT4145
http://support.apple.com/kb/HT4259
Note.
You cannot extend the guest network unless everything is up to date 7.6.3 firmware. And that is only with the TC as the main router in the network.
All apple routers can be configured as the main wireless or as the extend wireless.. so don't worry if a post uses express or extreme or TC.. they are for wireless, the same thing.

Setting up a multi-zone stereo system in my home with Airport Express

I'm trying to set up an in-home stereo system using iTunes as my main hub. I want to play iTunes as well as Pandora and possibly Sirius. Can I set this up with Airport Express? Would I control everything through iTunes on my MacBook or an iPad? How is this all wired if I have some existing external speakers with a receiver in my family room, built-in ceiling speakers in the kitchen, and outdoor external speakers? I am comparing this to a Sonos system, but the Sonos is not really in my budget.
Also, what is the difference between Airport Express and Airport Extreme? What would I need for this situation? Thanks in advance for your help.

>I want to play iTunes as well as Pandora and possibly Sirius. Can I set this up with AirPort Express?
From iTunes you can stream a single audio source to one or multiple 802.11n AirPort Express Base Stations (AXn), but you cannot stream multiple audio sources to separate AXns. You would need a third-party product, like Rogue Amoeba's Airfoil to stream audio sources other than from iTunes.
>Would I control everything through iTunes on my MacBook or an iPad?
You could do either.
>How is this all wired if I have some existing external speakers with a receiver in my family room, built-in ceiling speakers in the kitchen, and outdoor external speakers?
Of the speakers you mentioned, only the ones connected to the receiver would work directly connected to an AXn. The audio output port on the AXn is a combo 3.5 mm stereo analog/optical digital port. Assuming your receiver accepts either analog or digital audio input, you can feed the output of iTunes or Airfoil from the AXn to the receiver. In turn, the receiver (if configured for whole home stereo) can feed the kitchen and outdoor speakers.
>Also, what is the difference between AirPort Express and AirPort Extreme?
What's similar: Both are Internet routers that provide wireless. Both provide the ability to share an attached USB printer. What's different: The Extreme has a built-in Ethernet switch. The Extreme supports sharing HDDs and printers together or separately via a USB hub. The Express has a built-in audio circuitry, the Extreme does not.
>What would I need for this situation?
Only the Express can accomplish providing an audio stream.

Trying to set up wireless network on PC with Airport Express

I'm helping a friend set up his network with AirPort Express. He's got a modem attached to his PC, and currently has a router that sends a wireless signal to a receiver on the PC in the other room. Now he's added a Mac, and the old router/receiver doesn't work with Mac. So he bought an Airport Express.
I've turned on the Airport, and first I connected the ethernet cable from the modem to the AirPort. Per the AirPort utility I put on the PC, it couldn't find it (got the flashing amber light). So then I took out that ethernet, and I hooked up the ethernet directly from the CPU to the AirPort. Suddenly, it was found, and it took me step by step through the set up. It asked for password info from our internet provider (??why would I have that info??), so we just hit "enter". Then it couldn't set up the network, and said to check the "manage network settings". I've tried everything. Not only can I NOT manage to create a network, but now NEITHER ethernet cable will cause any recognition in the AirPort. All I get is the blinking amber light. I'm about to throw all the computers out the window...it really should not be this difficult. I've set up networks in my own home, before, with both PC and Mac, and never had these problems. So, now, I've had to relink up the old router/receiver in order to send out this call for help. Can anyone suggest anything else to try before I use these computers for target practice?
Thanks in advance,
Jennifer
P.S. The main PC w/modem is on Vista with service pack 2.0...since I can't even get that one working with AirPort, I hardly think it matters what the other computers are...

I had some initial problems too. Make sure that you have the latest Airport Utility in the utilities folder. I used that to correct the problems I had when I first got Time Machine. I recommend resetting everything through there to get it working right.
Mine is not set up to run an n network because my macs are all g and b compatible. Does the airport utility see the time machine? And if so, does it have a green light in the utility?

HP LaserJet 1000 not working with Airport Express

Has anyone had any luck getting a HP LaserJet 1000 working with Airport Express on Windows XP or even OS X for that matter?
I can connect to the Airport Express device using iTunes, but its pretty muched gimped for printing. uggh.
MacBook Pro Mac OS X (10.4.6) D-Link DI-524

I've no personal experience with your particular printer but these pages may help you
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?&lang=en&cc=uk&prodTyp eId=18972&prodSeriesId=45674&submit.y=7&submit.x=4&lang=en&cc=uk
http://www.ifelix.co.uk/tech/1013.html
Steve

Airplay disrupts transmission with Airport Express 6.2 and OS X 10.8.3 Any fixes known?

Airplay disrupts transmission with Airport Express 6.2 and OS X 10.8.3 Any fixes known?

Looks like this is a known issue which has been fixed for Java 8:
https://javafx-jira.kenai.com/browse/RT-23328 "Mac: Impossible to use -splash:<image> with JavaFX 2.2 and JDK 7"

Verizon Quantum Gateway Router settings issue related to printing and wifi cameras?

Hi,
I have a Verizon Quantum Gateway router and I just did a fresh install of Windows 8.1 Pro x64 and am downloading and installing my printer drivers. I connect the printer to the wifi network, 100% sure it is connected and settings are set to wireless lan. I've had this printer for a while. Doing the setup - it cannot find the printer.
Related: I bought a 2 pack of Motorola Focus66 wifi cameras to watch my dogs when I'm gone. I can connect to the cameras when I'm on my ipad's Verizon Wireless LTE connection, but when I'm at home connected to my same Verizon Fios wifi I cannot view cameras. Yes - the camera and apps support local and remote connections.
I have turned the firewalls all the way off and this does not fix the problems, so I'm believing it is in the router settings. Any suggestions?

I had a wifi network running at my house with a PC, Laptop, 5 iphones an iPad, and an XBox all running with no issues.. I got the "Upgrade" of the Gateway router and I can connect those devices to the network but WiFi printing is screwed up and Air Printing the apple devices is totally dead.. cannot see the printer. The customer support are completely a waste.. they suggested I pay for "Premium Support" At this point I've invested a solid 10-15 hours trying to get this setup and talking to Verizon and its just a mess.

Adobe acrobat only prints first page with airport express

I got my printer (HP PSC1315) to work with airport express using one of the solutions described in these forums. Printing is fine except when trying to print pdf files with adobe acrobat, in which case only the first page of the document prints. Preview has no trouble printing pdfs. Anyone else experience this? Is there a solution?
Thanks,
Kevin
PS- my version of acrobat is acrobat pro 7.0.5

Figured it out.
Adobe Acrobat/Reader is apparently very picky about printer drivers.
I had to have the users delete their mapped network printers from their Printers & Faxes window.
Then I opened the registry and went to:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3
I deleted the drivers for the printer(s) the customer had mapped (e.g. Xerox 6360DN, .. etc.)
I rebooted the computer
I had the customer logon and remap their printer.
That resolved the issue.

I have internet service on iMac but cannot get connection for Blu ray with airport express.

Why am I not getting internet connection for blu ray on tv with airport express?

Which exact model of the AirPort Express do you have?
Did the Blu Ray player connect wirelessly to the Express before or has it never been able to connect to it at all?

Hi-fi separates with Airport Express and Airtunes

Hi, please could you tell me whether it is possible to use a hi-fi separates system with airport express? it doesnt seem possible to me but i thought i would ask.
regards
ste bond

Ah. Much clearer to this antipodian now
If you have a look at page 15 of the Setup Guide for Airport Express, available at http://manuals.info.apple.com/en/AirPortExpressSetupGuide.pdf - it shows the connections it can be made to plug into.
Every hi-fi system I've seen has stereo RCA jacks (red and white plugs) on the back for accepting auxiliary inputs. You'll just need to get the appropriate cable from your supplier of choice. If you system is more modern, using fibre optic cabling may be a better option (avoids ground loops, avoids multiple analog/digital conversions, etc).
You can only use iTunes to send sound to the Airport Express, unless you get a third party application like AirFoil (from http://www.rogueamoeba.com/airfoil/ ), so technically "what I like" would need to be restricted to that which you had in iTunes, but basically, yes.

How make wireless connection with airport express to Yamaha Clavinova CVP-403 ?

I would like to wirelessly connect my Yamaha Clavinova CVP-403. I would like to use a D-link DWA 125 and my airport express. Does anyone has any experience on how to do that?

Hi Henry - you seem to be a very helpful and knowledgeable person and I am wanting to dive in to the depths of wireless working at home and could probably do with your advice. I certainly dont have as much knowledge as Jaybee and if hes had problems I am feeling a little apprehensive.
I know that the first thing I need to do is get an ethernet modem to use with Airport Express as I currently only have a USB modem. I was wondering if you have any recommendations or if I should go straight for the Netgear DSL modem/router (DG834B) that Jaybee ended up with. Although the bit about disabling the Airport Express resp. Extreme routers scares me rigid
I have looked at About this Mac and got the following for you hope its helpful.
OSX 10.3.9
1.33 HGz PowerPC G4 processor
Airport Extreme: Worldwide
Firmware: 400.17(3.90.34.0.p11)
Airport admin utility: 4.2 (v420.31)
My ISP is also Tiscali (UK) - they have said they can only provide modem support on the USB modem they provide so once I switch to an ethernet modem Ill be on my own. I have checked the Tiscali website and found the following modems, so I would assume (probably unwisely) that they would be compatible with my account...
Zoom X6 5590 DSL Modem (55907200)
D-Link DSL-300T
Zoom Hayes ADSL Ethernet (H0-15805) (081580572)
Any help is very gratefully received.
Regards,
... LIZ ...

Verizon Quantum Gateway has conflict with Airport Express

Similar Messages

Maybe you are looking for