Verizon USB727 USB Modem

I am running OS 10.3.9 on a Mac G5. I just purchased a Verizon USB727 USB Modem. Their info says it is compatible with this OS. I have tried to get the Network configured for it without success. Verizon Tech Support talked me through all of it, but we ran into a brick wall trying to figure out what modem driver to use. Verizon documentation says use the "generic" driver. Which one would that be. If anyone has been this route before and has the answer I would appreciate the assistance.

Okay . . . not exactly sure what settings to advise, but here goes:
1. do update to 10.4.11 (you're listed as being at 10.4.10)
2. Is your HPprinter an Ethernet printer? The ONLY Ethernet peripheral connected to your Mac? If so, try a simple crossover cable, it links Ethernet-to-Ethernet without any hubs, routers, etc.
3. The fun part: With your printer turned on, you want to make sure you have at least 2 Locations set up under System Preferences_Network references. One for the "National Access - Broadband Access" which should be fine (since you've got the high-speed connection).
The other Location should be for your Built-In Ethernet port. If you don't have a Location set up just for that, create one (Location_New Location). Below that click Show_Built in Ethernet. Now you have the 5 tabs to work through. This is how mine is set up:
TCP/IP: Configure IPv4: OFF, everything else blank, or filled in by the OS
PPPoE is all blank
AppleTalk: Make it Active, configure Automatically
Proxies: Configure Manually, all blank with a check for Use Passive FTP Mode
Ethernet: Configure Automatically
Good luck. Let us all know if this works. . .

Similar Messages

  • Has anyone been able to internet share when the internet source is a verizon USB modem?

    I'm on a macbook 3,1 running OSX 10.6.8
    internet is coming from a verizon USB modem/dongle model UMW190.
    I have gone through the steps for internet sharing - created a network, etc.
    My other devices (a roku box and an ipad) are able to see the wifi network i created.  prompts for a password, and i'm able to connect with great signal strength, but no internet!
    Tried every problem solving suggestion i could find on the messageboards.
    No firewill.  Changed the IP address. restarted, etc etc.
    nothing can seem to get my internet working on the other devices.
    If i leave it to automatic, the IP address i get starts with 169. and a message reads
    "AirPort has the self-assigned IP address 169.254.156.212 and will not be able to connect to the Internet."
    Could this be because the internet is coming from a USB dongle?  Is my computer too old?
    Has anyone been able to get their internet sharing working using a verizon USB dongle?
    Any help would be greatly appreciated!

    Update: For the heck of it, i tried connecting using my ipod touch - and it works! able to connect to the network and get on the internet.
    (that was after i changed the IP from automatic 169 to the IP address of the USB modem.)
    The ipad still won't connect (i'm told it may be due to a WEP non-compatibility)
    and i'm not sure what's up with the Roku...
    but it does work on one device.

  • Trying to connect playbook to verizon mobile broadband usb modem--can't get it to work

    Does anyone have any suggestions for gettting the mobile broadband usb modem to work with my playbook?  it took me a while to find a connector to connect the mini usb to the type A usb, but now that i've got it, i couldn't get it to work at all.   Has anyone gotten something like this to work? 

    This is the instructions for tethering from a BlackBerry handheld device.
    Article ID: KB26141 How to setup Bluetooth Internet Tethering on the BlackBerry PlayBook tablet
    If you want to tether to another device, I don't know how.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Using USB modem with a macbook

    I use a vodafone usb modem to connect to the internet , and i am currently trying to download a torrent using Azureus , but my download speed has never been higher than 10kB/s.
    Does any one know how to configure a usb modem to Azureus so the speed can improve. Or does anyone know another software which works better with usb modems ... help.

    My speeds are related to signal strength just like my phone coverage which is relatively the same thing because the usb modem is a phone of sorts. In urban areas, the strength is much stronger than in rural areas but for the most part, I am very happy with Verizon. I've found that the device is not as important as the provider and the quality of their network.
    To me, the ability to use my machine anywhere I choose is appealing regardless of the speed.

  • Wireless USB Modem connection problem on MacBook Pro

    I am running os x 10.8.2 on my macbook pro and am trying to connect to the internet using an alltel Wireless USB Modem (manual found here: http://pcdphones-client.s3.amazonaws.com/files/709/Alltel_English_Manual.pdf) through verizon. The USB modem works on all my PC's at home and I recently switched to a mac.
    I got the software installed when I plugged the USB modem in, but i cannot get it to connect to the internet. When I open the alltel program, I cannot click the connect button and it says "no wireless WWAN device connected" and "no wireless networks defined. To define a network, click on Networks in the Preferences". I've been in the networks tab, but don't really understand how to get it to connect.

    When you contacted aaltel what did they have to say?

  • USB modem won't work with Panther

    My girlfriend has a black G3 powerbook and uses a Speedtouch 330 USB modem successfully on OS9. However I have also installed Panther 10.3.9 and installed the Speedtouch Panther driver update from their site but when I open the Network preferences panel Speedtouch USB does not come up as an option.
    If I go to the list of modems it is there but if I select it it still doesn't work.
    In the past I have used a USB modem with my G4 and Panther and after installing the driver it immediately appeared as a new connection option called Speedtouch USB and it worked fine.
    I have tried reinstalling the driver several times. I have spoken to Apple and I have spoken to Speedtouch with no result.
    I can only assume that it is something to do with the black G3 compatibility.
    I have done a test with her powerbook in Panther and plugged in my ethernet router and it works fine.
    But these routers are quite expensive and it bugs me... why won't Panther recognise the USB driver?
    Any suggestions please ?
    thanks
    Pete
    London, UK

    My westell modem is very flakey and will often reset its connection from PPOE to bridge all by itself. From what I read on the web, setting the westell to bridge is the way to go since it allows the router to actually route. But, for me it only works when sent to PPOE. That means that the westell is both a modem and DNS/NAT router so I disabled those capabilities in airport. The verizon dslstart.verizon.com has some help on how to do this. search on westell 6100.

  • Windows 8 computers using USB modems

    When using a new Windows 8 computer with a USB modem you must download the new software for the USB modem and the new drivers from www.vzam.net.  The existing disk that comes with the device will not have the current drivers or software needed to intall VZAccess manager to Windows 8.  Use WIFI to get to Access Manager. In the drop down box choose Windows 8, choose USB modem in the next dropdown and follow directions. Should take about 15-20 minutes, the computer will restart and you can start access manager just as before. 
    <Discussion moved from All Things Community to Broadband & Netbook for more exposure.>
    Message was edited by: Verizon Moderator

    There is no disk.
    Borrow a friends PC or ask them to do you a favor and make one for you.  Go to a hotspot, library or borrow a buddy's internet for 20 minutes.  You can get the files from the download to your desired PC however you like from there (Burn to CD, copy to USB drive, share over the network, etc.)
    You could try contacting VZW tech support and see what they say.  However, it will be cheaper and faster if you find a better way to download it for yourself.

  • A USB modem that works w/MBA

    This is the second time I'm having to return a USB modem because they are just not compatible w/the MBA. I have heard theories that the USB port is under-powered which leads to the constant disconnects. Please, someone out there has to be successful w/ a MBA+USB modem. Let me know so I can get one. I bought this computer to be connected through broadband but am failing miserably.

    So, maybe I addressed my question incorrectly (an air card instead of usb modem). For anyone who is interested I have found a perfect mobile solution for my MBA, care to listen? Since I didn't want to have more carriers than AT&T for my iPhone & air card, I decided to try the usb Quicksilver. If you have an MBA, don't get this (I got stuck w/a 2 year contract) as it will not work. It is not Mac friendly. The next product I tried is far superior & completely adapted for the MBA. It is the Verizon Mifi 2200. I have to use 2 carriers though, my setup will rival any road warrior's.

  • 4g USB modem with Android (wifi only, ICS) tablet?

    Will the  VZW UML290 4g USB modem work with an Android tablet (obviously without a built-in 4g radio, only wifi)?  There is no VZ Access Manager software for Android, would an Android networking app do the trick?

    Hi, I have the same question because I want to buy a Transformer Prime. <Content deleted per the Verizon Wireless Terms of Service>
    The best that I could find is that you'll do just fine with a MiFi hotspot device and the appropriate Verizon account.  Reviews seem to favor the 4510 L over the Samsung MiFi device.   If you have an account for the Pantech now, you can upgrade your contract to the MiFi.  All of your computers, Android, Mac and Windows will work on the MiFi hotspot because there is no software needed to connect.
    Alternatively, you can check out Cradlepoint wireless routers.  They offer a boatload of portable WiFi routers that can tether to any number of mobile devices including the Pantech UML290.   For the Pantech, you plug it into the Cradlepoint router's USB port and create your own portable hotspot LEGALLY with your Verizon Pantech account. You then connect your Transformer wirelessly to this hotspot bypassing the need to use the VZW interface that is not yet, and may never be, Android compatible.
    As for your original post regarding an Android app for the Pantech UML290, I'm certain some 'enterprising' droid devotee is working on it, However, I've not yet found anything on the web yet that provides a viable work around except for the completely legit MiFi from Verizon or a Cradlepoint wireless router.
    NB to Verizon support.  You should have provided the MiFi information, it's your product for pete's sake.
    Good luck!
    Message was edited by: Verizon Moderator

  • Samsung Convoy as USB Modem

    Can I use my Samsung Convoy as a USB modem to connect my Netbook to the internet? My netbook has Windows 7 Starter and when I try to use the phone as a modem it asks for the device SSID during the connection process. I have no idea how to find out what my phone SSID is or if that's all I need to find to make the connection work. Any guidance on whether this can be done and, if so, how to do it would be much appreciated.

    Jake1313 wrote:
    Can I use my Samsung Convoy as a USB modem to connect my Netbook to the internet? My netbook has Windows 7 Starter and when I try to use the phone as a modem it asks for the device SSID during the connection process. I have no idea how to find out what my phone SSID is or if that's all I need to find to make the connection work. Any guidance on whether this can be done and, if so, how to do it would be much appreciated.
    Hi Jake1313,
    Great news! Your Samsung Convoy device is Mobile Broadband Connect capable. This means you can use your phone as a modem to access the internet on your computer. You just have to add the $20/2GB Mobile Broadband Connect feature to your Verizon Wireless calling plan (overage rate is $20.00 per GB. You can add this feature online if you access your My Verizon account, or we can add for you if you call us at 1-800-922-0204 when you are ready to add this feature.

  • I had to purchase a 4G LTE USB Modem due to a very slow 3G IPhone 4 Connection!

    Sorry if I am unable to reply to any of the existing posts, or reply to any replies that get posted here, but I just wanted to let Verizon's Apple IPhone 4 Support team and Community Members know that the reason that I am now mostly using my new Novatel Wireless 551L 4G LTE USB Modem to surf the Internet instead of my Apple IPhone 4 is that I am getting very slow 3G Speeds fom my Apple IPhone 4 all of a sudden, and it is NOT even a year old yet. Anyone who needs to use the Internet on their Cell Phones should know, this IPhone is not for you!

    Hello Verizon, just checked back in today to see what going on and I can tell you that my 551L connects just fine at 4G LTE on Windows, still NOT functioning on my Mac OS X, but very happy with my 551L, also very happy with my IPhone 4S, have had some problems with Data Overages due to the fact that my Parents aren't letting me use their Comcast Connection (I live with my Parent's due to living on Social Security and being a Medicare/Medicaid Dual Eligable), other than that I have been fine. I was more than a little annoyed about two months ago when you guys disconected my service but I am over that now, I will however switch to either Sprint or Virgin Moble if it happens again, just to let you guys know that I was NOT very happy with being Disconnected, expecially since I am Low Income and I did NOT have the kind of Money that you were asking for at the time. Just FYI.

  • Acer Iconia Tab A500 and UMW190 USB Modem?

    Can the UMW190 USB modem be used with the Acer Iconia Tab A500, or is this tablet supposed to be compatible with Verizon 3G/4G?

    I'm sorry but the Acer Iconia Tab A500 is not supported by Verizon Wireless. This tablet is not one of our devices. 
    Thanks very much for your posting!

  • UML290 USB Modem 4G

    I had a PC5750 that worked great with my corporate VPN and I heard about the 4G modem (UML290) and just had to have it. It has an unbelievable speed and I love that. But like the other people here, it will not connect to my corporate VPN and I am using the standard Microsoft VPN application. I have to be able to login to my VPN or it is useless to me. Hey Verizon Hello! Is anybody out there? I hear crickets. I need help, I have a corporate account with you Chop! Chop!

    The Pantech UML290 4G USB modem is  VPN capable.
    Verify the settings on the device.  
    The USB modem (with the SIM card) must be inserted. 
    Open VZAccess Manager.
     From the Windows desktop, click Start > All Programs (Programs) > VZAccess Manager.
    If presented, enter the PIN then click OK.
     The default PIN is 1111.
    From the Top menu, click Options > Preferences.
    Select the feature, adjust as desired then click OK.
    Ensure desired options are selected (checked). 
    VPN Client 
    Specify a default VPN Client to open. 
    Profile 
    Specify a default profile in which to connect. 
    Automatically start the VPN on connection 
    Opens the default VPN application upon connection. 
    Try the links below for more trouble shooting steps:
    Copy and paste the links below into your browser's address bar for more information. 
    http://support.microsoft.com/kb/308208
    http://technet.microsoft.com/en-us/library/cc958057.aspx

  • Why the difference in plans between USB modems/hotspots and tablets?

    I have a USB760 3G USB Modem that I want to activate on Friday when I get paid.  I went to the Mobile broadband plans webpage and looked at the pre-paid plans that are available.
    However, they price data access differently for USB modems/hotspots than they do tablets. 
    For a USB modem, I can get only 1GB for $50.  But with a tablet, I'd get 2GB for $30.
    Why the difference?  Can anyone explain this to me?
    I would appreciate some info.  I called the phone center, and they were no help and knew nothing.  I thought maybe someone at Verizon would read this and actually be able to give me a sensible explanation of why data plans for a USB modem are so much more than for a tablet...especially when my USB modem is 3G and won't have as much bandwidth impact as a newer model.
    Thanks.

    Probably because you were reading the information incorrectly.  Per the table below, you get 5GB for $50 for the USB Modem.  You just don't have the option of the 2GB plan with the modem as (and this is my guess) most users use more than 2GB per month with those devices.
    Hope this helps.
    Mobile Broadband Plans
    How much data do you need? That depends on you. The more data you have,
    the more you can do like surf, game, and more.
      Calculate Data Usage  
    2GB – $30/Month
    5GB – $50/Month
    10GB – $80/Month
    Tablet/Netbook
              X
              X 
              X 
    USB Modem/Notebook/
    Dedicated Mobile
    Hotspot/Verizon Jetpack™
              X
              X 

  • Set up Time capsule with USB modem

    HI
    I'm relatively new to my mac & I just purchased a time capsule. I use a Verizon USB modem for internet and this has caused me some problems trying to set up the TC.
    Is there anything any one can tell me to help? I could use some step by step help. The light is green, says I was successful but I can't print & have not even tried anything else. I just know my internet connection is wrong.....
    Any suggestions would be appreciated!

    I was hoping I could set it up for remote printing & backup w/o using internet connection. No?
    Although the Time Capsule (TC) could be configured a number of ways, having a USB modem will limit you somewhat. I am assuming that your modem is not wireless and that you connect your MacBook Pro directly for Internet access using an USB cable ... correct?
    Since the modem doesn't have an Ethernet port, the only option you will have for the TC is to operate it as a wireless network ... basically its default configuration. You then have two choices on how to connect your MBP to the TC: by Ethernet or wirelessly.

Maybe you are looking for

  • My main computer broke, can i use one of the 5 authorize computers to purchase and download songs

    My main computer broke, and I want to know if I can still purchase and download songs to my apple devices using one of my five authorize computers? It is my wife's computer and she also uses itunes. Can I log her off and use my log-in?

  • Xorg.0.log: "failed to get session"

    I am seeing this scary error message in Xorg.0.log: # less /var/log/Xorg.0.log | grep EE [ 4.078] (EE) systemd-logind: failed to get session: PID 587 does not belong to any known session Is there anything I can do about it?

  • X240 F8 Wifi function (fn) key not working

    Hi guys, Just wondering if you guys have the same problem with the F8 wifi switch function key not working? The F8 function key only works if I have the "Network" page opened on the right hand side (by clicking on the network logo on the task bar). I

  • Remote debugging from Windows to Linux

    Is there a full description of every step needed to do remote cross-platform C++ debugging? I'm using the Indigo version of Eclipse CDT on Windows and would like to debug an application on a remote Linux machine. On Windows, I do not have the ability

  • DreamweaverMX 2004

    I cant design with dreamweaver as im getting stupid errors which are making life hell when i click on a a anchor tag i get the box where Dreamweaver has to shut down, sorry for the incovience when i'm click on any other options along the top i get:-