Verizon wireless collection that's not valid. please help?
About 4-5 months ago I decided I wanted to start service with Verizon so I went online and ordered a phone. A few hours later I decided I wanted to keep my current wireless provider so I called Verizon and told them i no longer wanted the device. The order had already shipped but they stopped shipment when it arrived at it's 2nd location so the device never actually made it to me. Ok so i figured everything was all good since the rep said I was all set and it was cancelled. Well, about 3 weeks later I received a bill for a phone i never even received...Ok, no big deal so i called and spoke to someone and they could see the phone was never delivered to me and also no usage on the account so he said he cancelled everything and I have nothing to worry about. Well, last week a Verizon collection popped up on my report for a balance of $200. My score dropped quite a bit due to this. I'm still very calm about everything and thinking, ok this must just be a mix up. Anyway, I send an e-mail to the CEO address and I receive a call about 30 minutes later. He looks up the account and sees that the phone was returned back to their warehouse and I should have never been liable for this debt. I told him I wanted it removed immediately (just as I stated in the e-mail i sent) from my credit reports and he agreed that's what needed to be done since I shoudl have never been liable for this. He put me on hold and came back and said he forwarded it to someone to take care of it and they will have it removed and also a letter will be mailed to me showing it's not my debt or whatever. Woke up yesterday and Verizon updated the collection to "PAID" with a 0$ balance. They can't do that can they?? doesn't the entire trade-line have to be removed?? seeing as they know and agreed I should have never been billed in the first place, let alone sent to collections. I guess I wouldn't care since it has no balance but from reading these forums...a paid collection is just as bad as an unpaid collection as far as your FICO, correct? What can I do to have this removed completely? I haven't contacted VZW yet. Should I contact them again and if no luck, file a complaint with the BBB / CFPB? You guys rock!!!! Thanks in advance.
Wait for your letter to show up also. Like 21 said give it maybe a week or so, don't freak out just yet and see what they do.
Similar Messages
-
I am attempting to use my new adobe photoshop elements 12. I asked for a serial number per instructions, typed in the serial number and am being told it's not valid- please help
First make sure you are using the correct code for the serial number. To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html
https://redeem.licenses.adobe.com/getserial
If you still have a problem you can contact Adobe Support using chat and they might be able to assist you.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
Mountain Lion redemption code is not valid please help
I bought mountain lion and send me a invoice from apple
and they send a pdf files. it contains redepmtion code but that code is not valid?
I have no idea that situation
please helpContact Apple: http://www.apple.com/support/mac/app-store/contact/ They provided the code and it should work.
-
HT1539 Digital copy code on the DVD Knight and Day saying 'not valid', please help.
I bought the DVD Knight and Day and i have tried to download the digital copy of the film, however when i go to add my serial number for itunes which was on the slip in the dvd box, it says ' this code is not valid', i have entered the code many times and correctly, please help.
From what I can tell, the digital copy offer for Alvin & the Chipmunks expired back in March; at least it did for the Blu-Ray version in the US. This is a scam being run by the movie studios; they advertise digital copies on the Blu-Ray and DVD disks they sell, but don't tell you up front that they're redeemable only for a limited time after the movie is first released. You may need to contact customer support for 20th Century Fox and get them to help:
[email protected] or dial (866) 520-6606
Regards. -
"401 Unauthorized - User not found - The user credentials passed are not valid"- Please help, thanks
Anyone know what this means? Cannot upload a video with correct credentials.
ThanksCheck your registration details with Vimeo, or ask them for help.
-
I am trying to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?
CS3 is unsupported under Windows 8. That said, you'll need to contact Adobe
directly for serial number issues. -
The page contains markup that is not valid when attached to master page
Hi,
I have create an web application in VS 2005 and convert into VS2008. now i am facing a problem that a single page is not open in design mode which is inherit from master page.
and a message comes.
Error: The page contains markup that is not valid when attached to master page
please give me the suggestion that how can i open this page in design mode.
Thanks
Gaurav AnandNeither worked for me. Here is my code.
<
asp:Content ID="Content1" ContentPlaceHolderID="fkhead" Runat="Server">
<script runat="server">
Public Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Not Page.IsPostBack Then
Dim a As String = "This is other data"
pqriminadpaylbl.Text = a
pqrimincustlbl.Text = a
pqriminadpaylbl.Text = a
pqriminpcdevlbl.Text = a
pqriminpctoollbl.Text = a
pqriminsaleslbl.Text = a
pqriminspadeslbl.Text = a
pqriminspamatlbl.Text = a
pqrimintdamortlbl.Text = a
pqrimintdcclbl.Text = a
pqrimintddtlbl.Text = a
pqrimintdfclbl.Text = a
pqrimintucdeslbl.Text = a
pqrimintucdollarlbl.Text = a
pqrimintucmatlbl.Text = a
pqriminvolaslbl1.Text = a
pqriminvolaslbl2.Text = a
pqriminvolasyear1lbl1.Text = a
pqriminvolasyear1lbl2.Text = a
pqriminvolasyear1lbl3.Text = a
pqriminvolasyear1lbl4.Text = a
pqriminvolasyear1lbl5.Text = a
pqrimindislbl.Visible =
False
pqriminprevbtn.Visible =
False
pqriminnextbtn.Visible =
False
End If
End Sub
</script>
<style type="text/css">
.trest
.newStyle1
text-align: right;
.table
width: 100%;
.newStyle2
font-size: 20pt;
font-weight: bold;
text-decoration: underline;
text-align: center;
.tdparts2
font-size: 16pt;
font-weight: bold;
.tb25
width: 25%;
font-size: 9pt;
.tb20
width: 20%;
font-size: 9pt;
.tb40
width: 40%;
font-size: 9pt;
.tb30
width: 30%;
font-size: 9pt;
</style>
</
asp:Content>
It works fin, but the designer keeps craping out. This was not happening until recently. Not sure what is up with it. -
Hi all,
While viewing report in SSRS 2008 i am getting an error like this
Warning 1 [rsInvalidExpressionDataType] The Value expression used in textrun ‘Textbox21.Paragraphs[0].TextRuns[0]’ returned a data type that is not valid.
sotred procedure
ALTER
Procedure [dbo].[spGetSupervisor]
@START_DATE
datetime,
@END_DATE
datetime,
@CenterID
varchar(4000),
@TITLE
varchar(100)
=
NULL
as
Select
Distinct L1_ID SupID,
L1_Name SupName
from
REF_DB.info v
inner
join dbo.fn_MVParam(@CenterID
+
P
v
.CenterID
= p.Column1
where
v.startdate
<= @END_DATE
and v.enddate
>= @START_DATE
and
(v.title
IN
(@TITLE)
or @title
is
order
by Name
Here is the expression in Report textbox
=Parameters!CenterID.Label
Please
help me
Thanks
in advance
Jyo
null)
ONHi Jyo1105,
Thanks for your question. Based on my research and experiences, the issue may be caused by you set the @CenterID
is a multiple values parameter.
If in this condition, you couldn’t use the expression of
Parameters!CenterID.Value directly, you
should use a join() function on the parameter to merge the whole values, or add a sequence number behind the expression to use a specific value, just like this:
=join(Parameters! CenterID.Value) or
=Parameters! CenterID.Value(0)
If your issue still exsits, please feel free to let me know.
Thanks,
Sharp Wang
Best Regards. Sharp Wang -
Command Line argument is not valid please verify the switch.......???
hello frends
We are currently getting this error.
Command Line argument is not valid please verify the switch.
The code used to send the mail is
mail ="mailto:?subject="+escape(subject)+"&body="+escape(email);
document.location = mail;
return ;
this is a javascript code to open outlook mail to send emails.
the main problem is,when we write
mailto:?subject=abc&body=uvwxyz......
then we should be getting abc as subj and uvwxyz as the body..,and we r getting it....
but when we include ""(double quotes ) in either the subject or the body..,it is showing the error line mentioned above.
and if em using the html tags in the body part..,it's giving everything including the tags,which z not desired.
kindly help me .....shikha6g wrote:
i've thought..,you people are brainy enough to help me out in the javascript too...!!so..,i relied on this forum and have posted my problem,coz solving this thing was really imp for me.
i din't knew,dat i'll get such circastic replys here.sorryTo me, being brainy implies that you are a smart thinker and good at problem solving. It doesn't mean that you know a language that you never learned. -
We are trying to convert a physical windows 2003 R2 32 bit server to a VM using VMM 2008 R2 with all updates installed. Each time when we scan the system on VMM, it gets this message: Error (2901) The operation did not complete successfully because of
a parameter or call sequence that is not valid. (The parameter is incorrect (0x80070057)). If I use disk2vhd.exe to convert only C drive, I get parameter is incorrect. Any ideas?
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.comHi Sir,
>> If I use disk2vhd.exe to convert only C drive, I get parameter is incorrect. Any ideas?
>> gets this message: Error (2901) The operation did not complete successfully because of a parameter or call sequence that is not valid. (The parameter is incorrect (0x80070057)
Please refer to following article regarding this error :
http://blogs.technet.com/b/hugofe/archive/2010/07/09/abe.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
Iam in another country but it doesnot get a sim card becouse it says that its not valid what do i do
iam in another country but it doesnot get a sim card becouse it says that its not valid what do i do please helpme
You need a SIM card from the carrier your phone is locked to. If you are trying to use a SIM card from a different carrier, that is why you are getting the error message. Either get a supported sim or request that your phone be unlocked by contacting that carrier.
-
I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.
I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone. -
I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi
Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
hello, why is all of my music on my iphone but only a few songs on my itunes on my laptop? it seems like its not updating on my laptop because it still says i have credit and i know i that there isnt any please help thanks
If they are iTunes purchases that you bought on your phone then have you copied them over from it to your computer's iTunes ? If that is the computer that you sync the phone to then you should be able to copy them over by connecting it and doing File > Devices > Transfer Purchases. Or (depending upon what country that you are in) you might be able to redownload them directly on your computer's iTunes via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage.
In terms of your account's balance, have you tried logging out of your account on your computer (Store > Sign Out menu option) and then logging back in (it will change to a Store > Sign In option) and seeing if your balance changes ? -
I have a Mac OS X Version 10.5.8. Just updated my iphone 5 & can not back anything up from itunes because my software on my mac is not up to date. What software should I now have to be up to date? Im so confused by all that is offered! PLEASE HELP ME.
Hi
You need to upgrade to the next OS 10.6 Snow Leopard by purchasing the DVD online.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
and once installed, use Software Update
- to update to 10.6.8
- and update your iTunes.
Maybe you are looking for
-
I edit a photo and when I click Save As, I get error message "Could not complete your request because of a program error." I exit Elements, try again, same error. In past I had this problem but it resolved when rebooted PC. This time, PC reboot
-
Kernel panic after installing 10.7.4
Hi, Unfortunately, I've installed the latest update 10.7.4 from apple. Since I've upgraded I had 8 Kernel panics happening sometimes without even touching the macbook pro. I'm really disappointed about this update. Do you have any ideas about this ?
-
How hard is it to learn Photoshop ?
Hi everyone, Curious in learning how to use this software, have heard some good and fair comments about it's use. I have a few websites I design myself and am looking to now enhance all of my graphics. I rank well on google, so I'm trying to not to l
-
I am the VICTIM of Remote Deployment. HOW do I get out of it??
I acquired the hacker in January. In February both of my computers were destroyed. I removed ALL forms of networking from my house -- TWC, all of my routers and adapters, etc. I went to Best Buy and bought a new computer, then another, then 2 more
-
Music syncing - rogue music showing up that I can't get rid of!
I have music on my iPad that is not in the folder I sync to on my main computer's iTunes music folder, and I can't get rid of it. Any suggestions? ITunes v is 11.1.0.126, iPad v is 7.0.2. Cheers