Versamail adding message header to emails
When I send an email from my versamail account it adds on additional header information to the email body and puts my original message at the bottom of the email. Does this happen to everyone else and can I somehow stop this from happening?
Here is an example of the info added on every email:
Date: Mon, 8 Dec 2008 18:47:00 -0500
Mime-Version: 1.0
X-Mailer: VersaMail(R) v. 3.5.5, Copyright (c) 2001-2006 Palm, Inc.
X-Sender: [email protected]
X-Priority: 3
Importance: Normal
Content-Type: text/plain; charset="ISO-8859-1"
Content-Transfer-Encoding: 8bit
Post relates to: Treo 755p (Verizon)
Hi Brada22,
I'm not really sure whether it is the e-mail client (Versamail) itself or the smtp server which adds this part of information to the mails. Maybe someone in the forum has profound knowledge about this. Fact is that every mail server on the road to the recipient is adding a bit of information, to track the way the mail took.
It is however not normal that this information is added to the body of the mail. It has to appear in the header part. In my Versamail, this information is not shown at all. On workstation email clients (like Thunderbird, Outlook ...), you normally can choose to display the full headers, or just a reduced set of header info (Subject, Date, From, To, Cc ...).
The mails I send from my Versamail on Treo 680 look absolutely normal on the receiver's side. If in your mails these infos are really appearing in the body section, I guess that it's the smtp server which is adding this information, and maybe there is something badly configured on this server. Perhaps you can ask the technical support of your provider !?
Post relates to: Treo 680 (Unlocked GSM)
Similar Messages
-
Can someone pls tell me where I can modify the message header in emails. For exmaple:
From: Gallery Center
Sent: Tuesday, October 19, 2004 8:57 AM
To: Gallery Center
Subject: Antique Liquidation Request
I would like to change the From: info to include the actual email address of the sender, and not the default "Gallery Center" that is displayedHowever I use outlook, and Gallery Center is the info
in the Sent From: , instead of the actual email
address... I would like to display the actual email
address like [email protected] instead of "Gallery
Center"If you're writing a program that displays that stuff, then the getFrom() method will give you the complete address which is "Gallery Center <[email protected]>", and you can display whatever you like.
But if your question is really "How do I make Outlook display..." then you're out of luck as far as I can see. I use Outlook too and I don't see any configuration option that lets you control that. Of course Outlook's configuration is a rat's nest made of spaghetti so I may have overlooked something; feel free to look for yourself under Tools, Options. -
Please Help. I received 4 emails from 1 person with the same message heading. The emails were automatically grouped Apple Mail. I replied to the latest mail in the conversation. Once sent the other messages in the conversation disappeared. I NEED THEM BACK! They all had very important attachments. I have tried looking for them in deleted items, even though I didn't throw any of them away, still cant find them. Never had this problem before. I'm pretty sure its a setting somewhere. Also tried expanding all conversations, no luck. Searching for the mails under the sent email address, no luck.
I'm sure they are not deleted but have somehow been hidden by Mail. Very frustrating.
Thanks in advance for any help.
Kash.I have found found out what has happened. I had requested a statement dating back to April 2012 from a supplier. They replied back with the latest statementof 2013 only but used the same subject heading as the previous monthly statements. Apple Mail automatically grouped these and I thought that they were sent altogether. As soon as I replied to the last email all other the previous emails ungrouped from the conversation leaving me lost as to where they had gone. They were all still sitting in my inbox but no longer part of the trcked conversation. I searched under the subject heading and all individual mails were all still there. (feeling stupid - )
-
Static information to be added in message header of the XI message in JMS
Hi Friends ,
Is it possible to add some customer specific internal information to message header of the XI message in PI 7.1 level.. If so how ?
customer wants to add some info and to verify whether it would be handled in PI itself or not..
Business case : SAP -
> PI7.1 -
> IBM MQ
All inputs will be appreciated .
Thanks.,
V.RangarajanHi preetak ,
Thanks for your info .Since i have not worked on JMS adapter
As per the Link it says as follows
If you want to set additional JMS message attributes, select Specify Additional JMS Message Properties (10 Maximum).
· In the table, enter the Name and Java Type of the JMS message properties whose values are to be included in the message header of the XI message.
Under Java Type, you define the JMS Java message type for the attribute in the created JMS message. The following are possible entries:
boolean , init , String etc.,
Question
1. How to pass the value to this parameter will it be XML file with parameter name and value ?
2. Any other blogs to refer ?
Thanks .,
V.Rangarajan -
SMS text message header does not display sender information
When I receive a text message the only header information that displays is the date and time. The senders information does not display. The lines are not even there. There is no way to reply to a text message or tell who the sender is. This problem is only with SMS messages. Regular email headers display just fine. I have done a wipe, reset, reload, everything possible with no luck. I am the only one in my office with this problem. I have not been able to find any information or postings from anyone having the same problem. I can read the text message, but there is no header (except for the date and time). Any thoughts?
Blackberry Curve 8350iI was able to resolve the problem by uninstalling the Blackberry desktop manager software and reinstalling it selecting Internet Email vs. Blackberry Enterprise Server. If you get to the screen that asks you to choose which type of email service you use and you accidentally choose the wrong one your phone will work but will do strange things, including sending all sorts of redirect emails. For me, this seemed to do the trick.
-
Dowloaded OS 6 to iPhone 4s. Get message when deleting email: "The message could not be moved to the mailbox Trash." Any solution?
Update - I deleted/re-added my account. Same issue. Also, no my Exchange calendar won't sync. Issue appears to be on the Exchange server. I see the following errors in my iPhone log:
Thu Jun 24 08:22:45 unknown dataaccessd[1690] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)" 0x189010
Thu Jun 24 08:22:45 unknown dataaccessd[1690] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)"
Thu Jun 24 08:22:45 unknown dataaccessd[1690] <Warning>: EAS|Folder with id 046953b97fad3041abac33b9777784fc-da284a and title Calendar has failed to sync 5 time(s) in a row
Thu Jun 24 08:23:14 unknown CommCenter[32] <Notice>: com.apple.persistentconnection[dataaccessd,1690] is releasing its assertion on PDP context 0.
Thu Jun 24 08:23:18 unknown dataaccessd[1690] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)" 0x183be0
Thu Jun 24 08:23:18 unknown dataaccessd[1690] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)"
Thu Jun 24 08:23:18 unknown dataaccessd[1690] <Warning>: EAS|Folder with id 046953b97fad3041abac33b9777784fc-da284b and title Contacts has failed to sync 5 time(s) in a row
Thu Jun 24 08:23:23 unknown CommCenter[32] <Notice>: Client [com.apple.persistentconnection[dataaccessd,1690]] is telling PDP context 0 to go active.
Thoughts? -
Search-Mailbox for Message Header Content in Management Shell
Can I use the search-mailbox command to search for message header content?
The reason I ask is because I need to search for any emails that came in to an email alias address.
I am searching a journaling mailbox.
Normally, I would do soemthing like...
Search-Mailbox -Identity "journalbox" -SearchQuery '"To: [email protected]"' -TargetMailbox "exportbox" -TargetFolder "exported_messages"
The problem is, because I'm looking to find the emails coming to [email protected], when the messages are journaled they appear as "To: [email protected]" in the journaled envelop message.
In this scenario if I could simply search header content for the email ([email protected]) that would accomplish what I need.Hi,
We can use the Search-Mailbox cmdlet to search messages in a specified mailbox and perform any of the following tasks:
Copy messages to a specified target mailbox.
Delete messages from the source mailbox.
Copy messages from the source mailbox and delete them from the target mailbox.
Perform single item recovery to recover items from a user's Recoverable Items folder.
Clean up the Recoverable Items folder for a mailbox when it has reached the Recoverable Items hard quota.
To search for message header content, we can use Get-MessageTrackingLog cmdlet.
Here is an article for reference:
http://exchangeserverpro.com/exchange-2010-message-tracking-log-search-powershell/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards. -
Discovery response message header encapsulation failed
Hey All,
i get this from an AP any ideas why this may be happening?
Last Error Occurred
Failed to send Lwapp discovery response
Last Error Occurred Reason
Discovery response message header encapsulation failed
Last Join Error Timestamp
Sep 19 15:56:36.771
running WLC version
7.0.98.0This is what it tells me:
flashfs[0]: 4 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 1755648
flashfs[0]: Bytes available: 5985792
flashfs[0]: flashfs fsck took 9 seconds.
Reading cookie from flash parameter block...done.
Base ethernet MAC Address: 00:13:19:c8:f9:b6
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbs, full-duplex
Ethernet port 0 initialized: link is up
Loading "flash:/c1200-rcvk9w8-mx/c1200-rcvk9w8-mx"...################################################################################################################################################################################
File "flash:/c1200-rcvk9w8-mx/c1200-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1200 Software (C1200-RCVK9W8-M), Version 12.3(7)JX9, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Tue 17-Jul-07 00:44 by tinhuang
Image text-base: 0x00003000, data-base: 0x0033DA20
Initializing flashfs...
flashfs[1]: 4 files, 2 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 7741440
flashfs[1]: Bytes used: 1755648
flashfs[1]: Bytes available: 5985792
flashfs[1]: flashfs fsck took 2 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-AP1231G-A-K9 (PowerPC405GP) processor (revision B0) with 14838K/1536K bytes of memory.
Processor board ID FTX0907J0E8
PowerPC405GP CPU at 196Mhz, revision number 0x0145
Last reset from power-on
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:13:19:C8:F9:B6
Part Number : 73-8704-08
PCA Assembly Number : 800-23211-09
PCA Revision Number : A0
PCB Serial Number : FOC09024TMB
Top Assembly Part Number : 800-23304-08
Top Assembly Serial Number : FTX0907J0E8
Top Revision Number : A0
Product/Model Number : AIR-AP1231G-A-K9
Press RETURN to get started!
*Mar 1 00:00:04.402: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1200 Software (C1200-RCVK9W8-M), Version 12.3(7)JX9, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Tue 17-Jul-07 00:44 by tinhuang
*Mar 1 00:00:05.380: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:06.380: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
ap>
ap>en
ap#debug lwapp console cli
LWAPP console CLI allow/disallow debugging is on
ap#debug lwapp client event
LWAPP Client EVENT display debugging is on
ap#debug lwapp client error
LWAPP Client ERROR display debugging is on
ap#debug capwap client event
^
% Invalid input detected at '^' marker.
ap#debug capwap client error
^
% Invalid input detected at '^' marker.
ap#
ap#
ap#
ap#
*Mar 1 00:00:23.416: LWAPP_CLIENT_EVENT: lwapp_ip_address_change - ADDING IP 10.0.0.1, 255.255.255.0; resolvemethod 1, ip_dhcp_addr 0
*Mar 1 00:00:23.419: LWAPP_CLIENT_EVENT: lwapp_set_ip_address - Seting Static IP 10.0.0.1 255.255.255.0 on FastEthernet0
*Mar 1 00:00:23.419: LWAPP_CLIENT_EVENT: lwapp_set_ip_address - Seting Default Gateway IP to 10.0.0.2
*Mar 1 00:00:23.425: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:00:23.425: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:00:23.431: LWAPP_CLIENT_EVENT: parse_lwapp_config: hostname AP0013.19c8.f9b6
end
*Mar 1 00:00:23.447: LWAPP_CLIENT_EVENT: lwapp_crypto_init_mic_keys_and_certs : MIC not present
*Mar 1 00:00:23.453: LWAPP_CLIENT_EVENT: lwapp_crypto_init_ssc_keys_and_certs found key(1) label CISCO_IOS_SSC_Keys
*Mar 1 00:00:23.458: LWAPP_CLIENT_EVENT: lwapp_crypto_init_ssc_keys_and_certs Certs Keylen 294
*Mar 1 00:00:23.459: LWAPP_CLIENT_EVENT: lwapp_crypto_init_ssc_keys_and_certs Public Key Match Found CISCO_IOS_SSC_Keys
*Mar 1 00:00:24.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:00:34.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:00:34.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:00:44.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:00:44.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:00:54.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:00:54.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:01:04.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:01:04.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:01:14.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:01:14.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:01:24.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:01:24.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:01:34.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:01:34.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:01:44.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:01:44.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:01:54.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:01:54.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:02:04.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:02:04.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:02:04.389: LWAPP_CLIENT_EVENT: lwapp_check_image_good: image is good now
*Mar 1 00:02:14.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:02:14.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
AP0013.19c8.f9b6#
*Mar 1 00:02:24.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:02:24.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:02:34.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:02:34.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:02:44.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:02:44.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:02:54.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:02:54.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:03:04.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:03:04.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:03:14.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:03:14.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:03:24.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:03:24.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:03:34.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:03:34.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:03:44.036: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:03:44.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:03:44.036: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:03:44.036: LWAPP_CLIENT_EVENT: spamStartDhcp - AP IP FALLBACK TO DHCP
Translating "CISCO-LWAPP-CONTROLLER.org.org"...domain server (10.1.0.254)
*Mar 1 00:03:53.074: LWAPP_CLIENT_EVENT: lwapp_ip_address_change - ADDING IP 10.0.1.254, 255.255.255.0; resolvemethod A, ip_dhcp_addr 1
*Mar 1 00:03:53.181: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 10.0.1.254, mask 255.255.255.0, hostname AP0013.19c8.f9b6
[OK]
*Mar 1 00:03:53.181: LWAPP_CLIENT_EVENT: lwapp_ip_address_change - ADDING IP 10.0.1.254, 255.255.255.0; resolvemethod A, ip_dhcp_addr 1
*Mar 1 00:03:54.057: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:03:54.057: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway found
*Mar 1 00:03:54.183: LWAPP_CLIENT_EVENT: lwapp_name_lookup - add (0) 10.0.254.253
*Mar 1 00:03:54.183: LWAPP_CLIENT_EVENT: lwapp_name_lookup - add (1) 10.0.254.254
*Mar 1 00:04:04.057: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
*Mar 1 00:04:04.057: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway NOT found
*Mar 1 00:04:15.063: %LWAPP-5-CHANGED: LWAPP changed state to JOIN
*Mar 1 00:04:20.063: LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: Did not recieve the Join response
*Mar 1 00:04:20.063: LWAPP_CLIENT_ERROR_DEBUG: No more AP manager IP addresses remain.
*Mar 1 00:04:20.063: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET JOIN RESPONSE.
*Mar 1 00:04:20.064: %LWAPP-5-CHANGED: LWAPP changed state to DOWN
And this is on the controller:
(Cisco Controller) >show ap join stats summary 00:13:19:c8:f9:b6
Is the AP currently connected to controller................ No
Time at which the AP joined this controller last time...... Not applicable
Type of error that occurred last........................... Failed to send Lwapp discovery response
Reason for error that occurred last........................ Discovery response message header encapsulation failed
Time at which the last join error occurred................. Nov 29 17:23:35.793
(Cisco Controller) >show ap join stats detailed 00:13:19:c8:f9:b6
Discovery phase statistics
- Discovery requests received.............................. 97
- Successful discovery responses sent...................... 94
- Unsuccessful discovery request processing................ 100
- Reason for last unsuccessful discovery attempt........... Discovery response message header encapsulation failed
- Time at last successful discovery attempt................ Dec 03 20:07:22.259
- Time at last unsuccessful discovery attempt.............. Nov 29 17:23:35.793
Join phase statistics
- Join requests received................................... 0
- Successful join responses sent........................... 0
- Unsuccessful join request processing..................... 0
- Reason for last unsuccessful join attempt................ Not applicable
- Time at last successful join attempt..................... Not applicable
- Time at last unsuccessful join attempt................... Not applicable
Configuration phase statistics
- Configuration requests received.......................... 0
- Successful configuration responses sent.................. 0
- Unsuccessful configuration request processing............ 0
- Reason for last unsuccessful configuration attempt....... Not applicable
- Time at last successful configuration attempt............ Not applicable
--More-- or (q)uit
- Time at last unsuccessful configuration attempt.......... Not applicable
Last AP message decryption failure details
- Reason for last message decryption failure............... Not applicable
Last AP disconnect details
- Reason for last AP connection failure.................... Not applicable
- Last AP disconnect reason................................ Not applicable
Last join error summary
- Type of error that occurred last......................... Failed to send Lwapp discovery response
- Reason for error that occurred last...................... Discovery response message header encapsulation failed
- Time at which the last join error occurred............... Nov 29 17:23:35.793
AP disconnect details
- Reason for last AP connection failure.................... Not applicable
Ethernet Mac : 00:00:00:00:00:00 Ip Address : 10.0.1.254
(Cisco Controller) > -
I am getting the message that my email password and/or username is not correct. They are both correct! I am the only one who cannot send or receive emails...I am the only one using a mac. i use mac mail and it is my companies server. I took my computer and iPhone to the Apple store...4 hours later they said that couldn't figure out why it wasn't working. Any suggestions???? I am also not able to log into the C-Panel...
Same here! Happened yesterday to me on New iPad and iPhone 4S. On iPad I managed to correct it by removing the account and activating it again as an Exchange account...I have mail and calendar OK!
On the iPhone nothing seems to work!
Facts:
1. everything worked perfectly for years!
2. I have the 2-step authentication deactivated on my google account so it cannot be this one.
3. On desktop everything works just fine, on iPad everything is OK with Exchange account added (after Google removed support for Exchange account access I CAN ONLY HAVE ONE DEVICE with Google Exchange account, so doing the same on the iPhone does not work!)
4. Tried to remove and add the account again - no results.
5. Tried to remove and add as Google, as Exchange, as Other account - I get calendar but no mail!!!
6. Tried to reboot between remove/add accounts - no results.
7. Tried to ("reset settings") reset the device - no results.
8. Tried to add as POP account and I it worked - I get mail but I do not need POP as I am using zounds of mail with labels and need to be working on an IMAP account
9. To make things even more complicated...I have another account which works perfectly!!!!!
Anyone out there having a clue? -
Hi all,
in order to get our Load Balancer to work correctly, we need to add an attribute to every HTTP Request that comes from the portal. In 4.5 we have added it in the common/include.asp file.
Call Response.AddHeader ("MyAttribute", "MyAttributeValue")
Do you know where is the right place to put the code in 5.0.2. Have you any examples of Java code to do this?
Thank you very much.
AlbertoI'm going to take a wild guess at this -- on line 463 of com.plumtree.portaluiinfrastructure.activityspace.Interpreter, you might try adding the header you need to the response (IXPResponse) object somewhere inside of HandleGatewayRequest.
A word of caution: I think Plumtree would frown upon this customization, and here's why.
My guess was based on 5.0.1 as I haven't seen the source code provided to customers for 5.0.2 yet, but I suspect that they've refactored Interpreter into uiinfrastructure so that it's compiled instead of distributed to customers (based on this comment in the source):
/* Note: There should be no portaluiinfrastructure code in this file. This * will no longer be an issue when this file, along with AppWarmUp, are * moved to the uiinfrastructure jar. */
So if this is even possible in 5.0.2 (and I suspect it's not), it probably won't be possible to maintain this customization in future releases of Plumtree.
I'm interested to hear the official response from Plumtree because one of our customers is considering making a change to Interpreter and I've been cautioning them against it because it might not be supported in future releases.
Hope this helps,
Chris Bucchere | bdg | [email protected]| www.bucchere.com -
#5.3.4 message header size exceeds limit
Hi !
We are getting this bounce error message from our customers trying to send emails to our newly built C370 Ironport box.
Here is the error message;
"The following message to [email protected] was undeliverable.
The reason for the problem:
5.3.0 - Other mail system problem 552 - '#5.3.4 message header size exceeds limit'"
Hope is Delivery Satus Notification will help to identify what the problem is about.
Appreciate your kind response on how to fix this issue.
Best Regards,
RuveniHi Ruveni,
Please check our following knowledge base article which explains this error and provide solution for it.
Message Bounces with "552 #5.3.4 message header size exceeds limit"
http://tinyurl.com/2yw579
Hope this helps!
Regards,
Viquar
Customer Support Engineer -
When sending a message to some email recipients, appears the following message "The recipient X was rejected by the server because it does not allow relaying.
See the previous discussions on the right side of the page under the heading "More Like This". The one with the green checkmark was solved.
-
I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up under one account.
You can have a different receiving email in the Messages app on each device : Settings > Messages > Receive At . I'm not sure that there is a different way to have the message only go to one device.
-
How to acces the filename from Message Header during variable substitution
Hi,
We need to access the attribute filename from Message Header during Variable Substitution.We are able to access the following attributes of Message Header
sender_party, sender_service, receiver_party, receiver_service, interface_name, interface_namespace,
message_id (message ID with hyphens, for example 9fbe1ff1-9a0d-11d9-8665-cbf10a126331)
message_id_hex (message ID in hexadecimal format, for example 9fbe1ff19a0d11d98665cbf10a126331)
For example, if we want to specify the interface name from the message header in the target directory or in the file name scheme, we enter message:interface_name as the reference.
In the same way i need to access the filename which we get in the Message Header(which we get in the Message Header when we check the Adaptor specific message properties and filename in sender CC).Any suggestions on the same
Thanks and Regards,
Bhargav
Message was edited by:
bhargav gundabolu
Message was edited by:
bhargav gundaboluHi Bhargav,
Use this UDF to retreive the file name from the Dynamic Configuration Payload in the mapping.
getFileName(UDF) -
> Filename(node in the target structure).
public String getFileName(Container container)
//write your code here
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Create a node in the target structure top hold the filename returned by the UDF.
Now your payload will have the filename along with the actual data.
U can use the variable substution now as u use for the other data in the payload since the filename is now a part of your payload.
Regards
San -
Lately I cannot get any messages in my email outbox to send (pics I take, then forward through email). I keep getting an error message, "A copy has been placed in your mailbox. The sender address "xxxx" was rejected by the server." It is the same email address (also apple id) for comcast I have used for years and it always worked before. Can anyone help me solve this problem? Running version 6.1.3 software. I am so frustrated.....
Hey lloleary12,
Try out the following troubleshooting article:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
It'll go over how to troubleshoot Mail when it has issues sending email messages by determining which part of the email "ecosystem" is the cause of the issue, then steps to attempt to resolve it.
Regards,
David
Maybe you are looking for
-
I am getting error message -50 when trying to sync my 80gb ipod classic on windows 8.1
This just started last night. Itunes made me restore my ipod for some reason and then when I tried to transfer all of my songs this occurred. The transfer always started quick but then when I get into the 500-700 song range it slows down drastcially
-
Sound bar in IPad3 dissapeared?
Hello everybody. The sound bar in my IPad2 has dissapeared. At first it happened from time to time but now and I believe that this is something that have to be with any update has dissapeared. Can somebody help me?
-
hi, there is not HDMI port on X201 so how to connect to HD TV and watch HD movies with HD audios from the harddisk? + ThinkPad X201 3626-FBG / Intel Core i5 M520 2.4Ghz / DDR3 8Gb / Intel SSD 730 Series 240Gb / 12.1" WXGA 1280x800px / Dual boot Win7
-
Commitment carryforward (Former budgeting)
Dear all, After having upgraded from 4.6C to ECC 6.0, we tried to cancel commitment carryforward (RFFMCCFR) and we obtained the following message : "no item found for the reversal of the commitment carryforward". Table FMIOI is well updated with amou
-
Scanning with Epson 2450 on OS X 10.7.5
I use an Epson Perfection 2450 Photo scanner with Photoshop CC on OS X 10.7.5; I scan once then have to quit Photoshop and turn it back on before I can scan the next picture. I have updated the driver, and reset the printers/scanners list but the pro