VERSION 0 NOT DEFINED

Dear friends
VERSION 0 NOT DEFINED ERROR
I am working on CC 4000. When I save sales order, system give 0 version not defined problem.
I did: 
SPRP-IMG-Controlling-Organization-Maintain version-select 0 Version and click on Setting for Fiscal year then entered the Controlling Area.
Message display – Controlling Area 300 does not exist. But I checked in IMG in FI it is there.
Then I did: 
SPRP-IMG-Controlling-Organization-Maintain Controlling Area.
Copy 2200 Controlling Area to 3000. Then repeated the same steps.
SPRP-IMG-Controlling-Organization-Maintain version-select 0 Version and click on Setting for Fiscal year then entered the Controlling Area.
Marked the check box in 20007-Integrated Planning and Copy Allowed box then save.
After when I save sales order system still display the same error “version 0 is not defined”
But when I changed the system date to October 2002 there is no version 0 error.
Can any one give me solution where I am doing mistake or what the exact problem is 
Thanks
Raj

Hi,
Go to SPRO-IMG-Controlling-General Controlling-Organisation-Maintain Versions
Select  0
Go To Setting for each Fiscal year on the left side ,
Put your Controlling Area and Version 0 and click Tick
Then select year 2007 and tick copying allowed and save.
Regards
Adarsh

Similar Messages

  • VERSION 0 IS NOT DEFINED FOR FISACL YEAR 2007,

    i am learning SAP PP and i hv ides 4.7,
    now WHEN SAVING ORDER i.e DURING COST CALCULATION I GET A MESSAGE THAT VERSION 0 IS NOT DEFINED FOR FISACL YEAR 2007,
    ON ANALYSING IT LEADS TO T.CODE OKEV BUT HERE SYSTEM DOES NOT PERMIT TO CHANGE THE VERSION, BUT IN ECC 5.0 IT ALLOWS ,
    WHAT IS THE PROBLEM, CAN ANY ONE PL. HELP ME,
    analysis of error gives following message:
    Activation of the indicator is not permitted
    Message no. KT253
    Diagnosis
    You activated an indicator (Plan, Actual, WIP/results analysis or Variance calculation ) in the basic settings for version 1 in controlling area 1000. However, a higher order of settings (general version definition) prevents you from setting this indicator in version 1.
    Note
    The following should be taken into account when maintaining a version:
    In general version definition you decide whether a version is allowed for
    •     Panning (with the Plan indicator)
    •     Actual data update (with the Actual indicator)
    Note: In Overhead Cost Controlling, actual data is updated in operational version 0.
    Actual versions different from 0 are found at present only for delta versions in Activity Based Costing (CO-ABC), and when you work with parallel assesment ( additional versions):
    •     A data version from results and WIP determination manages (indicator WIP)
    •     Another version from variance determination manages (indicator Variance)
    •     A version for exclusive use (field exclusive application)
    You must maintain the version basic settings for each controlling area in which you want to update transaction data. General version definition restricts the settings possible for the controlling area:
    •     If general version definition does not allow plan and/or actual data update for version, this applies to the version in all controlling areas. If plan and/or actual data updating is allowed for a version in general definition, this can be reset for each controlling area separately (unmark the plan or actual indicator).
    •     Delta versions in ABC may not be used for parallel valuations in the actual; the same goes for versions with exclusive applications. In both cases, the valuation fields may not be maintained.
    To set indicators WIP/Results- or Variance-determination the following conditions apply:
    •     Both indicators may be set only during setup for the controlling area, when they are already established in the higher level general version definition
    •     If either indicator is already active in the data bank, then the actual indicator may not be subsequently activated
    •     If the actual indicator is inactive and either of these indicators is active, then the valuations in the corresponding versions and in version "000" must agree
    •     If the actual indicator is active, then both indicators must be activated
    Versions 0 and 1 are used regularly for various purposes by the system, which sets the following limitations/restrictions:
    •     Version 0 must always be available. It cannot be used exclusively. The plan and actual indicators must always be active.
    •     The actual indicator may not be activated in version 1.
    If these conditions are violated during version maintenance, error messages are issued. There are three types of error message:
    1. While maintaining the general version definition, you can only make changes if they do not violate the conditions outlined above.
    2. While maintaining the basic settings in the controlling area, the entries must remain consistent with the higher level entries.
    3. You want to maintain version 0 or 1. The restrictions outlined above apply.
    Use the "Extras" menu option to display the structure of the entries in the complex data object version:
    •     Select a version and choose Extras -> Version use.
    The SAP System shows which controlling areas use this version.
    •     Select Extras -> Versions in CO area
    This displays all versions used in the current controlling area.
    The subordinate entries in the hierarchy (settings for each fiscal year, strategic Activity-Based Costing: transactions for a delta versions) will also be shown for both cases.
    Procedure
    Do not activate the indicator, or change the higher order of settings in the general version definition.

    Raj,
    What are you trying to change?
    To me you are not suppose to make any changes, you need to select the version "0" and then hit "Settings for each Fiscal year" subfolder.... here you copy the settings of 2006 and change the year to 2007. This should resolve the problem.
    Regards,
    Prasobh

  • While creating sales order got error version "0" is not defined for company

    Hi,
    i got a error  while creating a sales order(va01) ,i got an error
    saying that "version 0(zero) is not defined for company code
    if there is any solution please provide....
    Thanks&regards
    kishore kumar

    Go to TCODE:OKEQ
    1)select version 0 here and ext select settings for each fiscal year under controlling area settings
    2)give your controlling area XXXX and version 0 then enter
    3)select new entries maintain data for new year 2008.
    Hope this will give u
    Sri

  • Swf-version can be specified when using SDK 3.6? [ Error #1065: Variable JSON is not defined ]

    I've been using playerglobal.swc of flash player 11 and SDK 3.6.
    ReferenceError: Error #1065: Variable JSON is not defined
    can be solved by setting -swf-version to 13. (http://forums.adobe.com/message/3933620#3933620)
    However, swf-version is not available in SDK 3.6.
    Can native JSON be used?
    Otherwise, can com.adobe.serialization.json.JSON be used without name conflict?
    JSON (from ...\flex_sdk_3.6\frameworks\libs\player\11\playerglobal.swc(JSON))
    com.adobe.serialization.json:JSON (from ...\as3corelib.swc(com/adobe/serialization/json/JSON))

    anyone know the answer to this?
    how are we supposed to use the new player features with using the 3.x SDK?

  • Version 0 is not defined for fiscal year 2012.

    Hello Experts,
    While am tring to release  a work order, i am getting the below error.
    Version 0 is not defined for fiscal year 2012.
    Message no. GP626
    Diagnosis
    The version 0 is not defined in controlling area DE06 for the fiscal year 2012.
    You have to maintain the fiscal year-dependent version parameters for all actual versions for which multiple valuation is updated.
    System Response
    The version 0 cannot be used for fiscal year 2012.
    Procedure
    Maintain the fiscal year-dependent version parameters for the version 0.
    Execute function
    By this what i understood is we need to change the Settings for each fiscal year for the version 0 in controlling area DE06.
    i.e. we need to add the fiscal year 2012 in that.
    Is this correct????
    If yes what will be the impact of adding 2012 in that screen?
    i think its a soft config only.
    Please let me know the correct process
    Thanks in Advance,
    Satya

    Version 0 is not defined for fiscal year 2015.
    What to do next ? Please help with it.

  • In archiving job getting error: F5210 period version is not defined

    Hi All,
    When trying to execute T-code SARA using object FI_documnt, I encounter an error message :F5210 period version is not defined. Checked tables T070(document type life), table T071 (account type life) and found that they are properly maintained.
    What should I do next? Please advice.
    Regards
    kapil Kukreja

    Hi Kapil,
    I could not sure what input parameters you have entered. You are recommended to not enter a company code, because if yes, the archiving program has to determine the current fiscal year for all company codes defined in your customizing. This is necessary, as the summary records can not
    be archived for the current and the last year.
    Please review note SAP note 141322.
    Regards, Gordon

  • Error in IR Namespace is not defined in the software component version

    Hi All,
    Please provide your valuable inputs to resolve the issue.
    Namespace http://xxx.com is not defined in the software component version xxx_xxxxxx , 1.0 of xxx.com
    Though the software component was already created in SLD and imported.All the developers were able to access the software component and create the Namespaces for their scenarios, but when tried to Activate the scenario above mentioned error is displayed.
    Below are the checks done.
    1.In Exchange Profile checked the properties,
    com.sap.aii.connect.cr.httpport
    com.sap.aii.connect.cr.name
    com.sap.aii.connect.landscape.httpport
    com.sap.aii.connect.landscape.name
    2. Tried to import the software components once again through IR -- No results
    3. Restarted the Java Engine through SMICM -- No results
    4.Performed the SLDCHECK no errors.
    Inputs please at the earliest
    Regards
    Shiva.

    Hi Jochen,
            This is occuring due to that the created namespace is not getting activated. As mentioned in earlier replies that if you have copied objects from somewhere else then all the related information should also be copied. If the problem resists then you can create all the needed objects in IR again and activate it separately instead of activating all at once.
    Regards,
    Subhasha

  • Version GLIBC_2.0 not defined in file libc.so.6

    hey all
    am trying to install database 9i on readhat 5
    installation is done but DBCA NETCA are giving error
    /u01/oracle9/jre/1.1.8/bin/../lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
    Unable to initialize threads: cannot find class java/lang/Thread
    Could not create Java VM
    soo how can i solve that please???
    i tryed the LD_ASSUME_KERNEL and didnt work also the patch compat-libcwait is installed and is installed and the patch 3006854 is also installed
    what can i do????

    i tryed the LD_ASSUME_KERNEL Is still your LD_ASSUME_KERNEL set?
    Recommended Settings for Installing Oracle Products
    O/S
    RHEL5, OEL5, SLES10
    LD_ASSUME_KERNEL setting
    Should not be set
    Additionally you can review: Oracle Metalink Document: What should the value of LD_ASSUME_KERNEL be set to for Linux?: Doc ID: Note:377217.1
    Adith

  • Version  0 not defined for fiscal year...

    Dear Experts..
    Im trying to do an hiring action but system says Version  0 not defined for fiscal year...
    Could someone tell me wat could be the reason???
    Regards
    Shanthini

    Hi,
    Go to SPRO: Controlling -  General controlling - Org - Maintain versions
    On the right hand side select version 0 then select controlling area settings.
    Again select version 0 on the right hand side and select Settings for each fiscal year.
    Then maintain the settings for the relevant fiscal year.
    Regards,
    Dilek

  • Why would I get ReferenceError #1065: "Variable title is not defined."

    Well of course it's not defined.  It's a dynamic class, and strict mode compilation is turned off so that I don't have to declare the property to compile it.
    I've created a library item named "Page" with a single TextField instance named "title".
    Page's class is defined in an ActionScript file, and it's assigned to the library item in export for ActionScript.
    Page's ActionScript file defines the class as a "dynamic" class, so I should not be getting this runtime error.  I turned off strict mode compiling, since it seems to be designed to check the presense of property definitions at compile time for dynamic classes like MovieClip.
    public dynamic class Page extends MovieClip
        public function Page()
            super();
            var text:String = title.text; //title can be moused over in the debugger here and shows the correct value, but the flash player throws a runtime error when it tries to access it, but it shouldn't because this is a dynamic class.
    So why am I getting a runtime error for the field "title".  It makes no sense, because if I step to that line in the FlashDevelop debugger and hold the mouse over "title", it shows that it is in fact the instance of the TextField that I'm trying to access.  Yet the player throws an error when I actually try to access it.
    Is it a problem or limitation with the access style (i.e. would it work fine if I accessed it as "this.title" or "this["title"]"?

    Nevermind.  This was apparently a browser caching issue.   The Page base class is defined in the main interface swf, and is externally referenced through its swc in an external "lesson" file that declare a subclass of Page.  It was this custom subclass of Page which was throwing the error (basically the same as the simplified example I wrote for my post, where it simply tried to access "title" as a dynamic property of the Page).  What happened is the browser was caching an old version of the lesson file with the old definition of the class that was not declared as dynamic.  I had received the error before, then updated the class, then I was surprised to see the error persist.  It suddenly dawned on me that the browser was probably caching the old version, so I cleared the cache and it seems to work fine now.
    Actually, it is a problem after all.  I forgot I had updated it to use "this.title" syntax on the page I tested after clearing the cache, but the other pages that try to access title directly as "title" still throw the error.  So it seems to be some sort of quirk in how flash accesses properties of a dynamic class.  If you try to access them direclty, it must do so in a way that requires the property to be defined, but if you access it via "this.title" or this["title"], the it seems to resolve the property value without throwing the error.
    This sucks.  I was really trying to not have to write "this." for every property.  The entire display list is dynamically generated from some custom XML that allows me to call constructors and set complex type-safe properties, and during construction it was copying each item into a Dictionary by name.  This Dictionary was then assigned to the page class as "items", so I was accessing each display object as "item.name".  Then I got the brilliant idea of just making Page and its subclasses "dynamic" so that I could just add the DIctionary values on the Page instance itself.  I thought I would be able to access the dyamic properties just by their name such as "title", but lo and behold, Flash strikes again, and I have to use dot notation anyway.  What do you all think?  Any solutions?

  • My app went from working fine to: Id field not defined for cfc Path.to.my.ORMCfCPag when I restarted

    Hi everyone,
    I have a CF9 ORM problem that I haven't been able to figure out and thought I'd see if you had any idea. I have seen a few postings talking about a "similar" problem but none of them correctly resolved this particular issue. I appreciate any help you can offer.
    I recently created a CF9 app where I generated scripted ORM CFCs for my app using ColdFusion Builder. It worked great and my app was completely working. However, when I was adding some enhancements, I ran into an error when I restarted the CF app server. Here's the message I keep getting:
    "Id field not defined for cfc Path.to.my.ORMCfCPage. Either the table should have a PK column mapped to a cfc field OR at least one field should be specified as id."
    My App.cfc file only had orm enabled (no other mappings) when it was working. I've since tried specifying things like the cfc location etc. and it still hasn't helped.
    // MORE DETAILS:
    - When my app was working, I had moved it to 2 other servers. I had this error on both of those but not on my local copy. They all use the exact same database.
    - The last change I made before the error was adding a generator="identity" field to my generated ORM beans. Once I got the message, I tried changing it back and restarting again but still got the error.
    - I've also made sure all of the Adobe tags are in my web root (as suggested in a prior posting about this problem). I've search all over for a solution and nobody has a solution posted online that works so far.
    Do you have any idea why this is happening?
    Thanks!
    Jeff

    Quick thought and probably not relevant, but do you have this.ormsettings.savemapping set to true in your Application.cfc? I've fallen foul of this before - once CF has generated the hbmxml files and saved them to disk you can make all kinds of changes to your code which won't make a difference as it'll continue to read from the file versions, but only for certain properties and methods at times it seems.
    Long shot I know, but I found CF ORM to be a nightmare for seemingly random caching.

  • Firefox pops up an error message on certain pages, all other browsers work fine, how can I make firefox ignore the "error" [e2219] css init error: ReferenceError: g is not defined

    Basically I want to replace the Ajax Control Toolkit Slider in favor of the Component One Studio for iPhone Slider for better mobile/desktop consistency (the ajax slider doesn't work well with iPhone). I created a simple page that works on every browser and platform (iPhone, Android, Mac, Windows) except Firefox, which fails on every platform. I have already tried disabling all plugins (safe mode) and clearing cache, I have also tried this with different versions of Firefox on different platforms. I posted this error on the Component One forum but since this only occurs with Firefox I believe this is a Firefox issue.
    I searched for this error on the forums and Google but didn’t get any results:
    ''[e2219] css init error: ReferenceError: g is not defined''
    The console has this message:
    ''[12:05:26.954] uncaught exception: [Exception... "prompt aborted by user" nsresult: "0x80040111 (NS_ERROR_NOT_AVAILABLE)" location: "JS frame :: resource:///components/nsPrompter.js :: openTabPrompt :: line 462" data: no]''
    You can see the error by visiting http://www.componentone.com/i/
    Visit the same URL with IE, Chrome or Safari and there is no error. If I click [OK] the page loads normally enough for me. Is there some JavaScript or CSS line I can put in the page to make Firefox ignore the error? If so that would be great because even if there is a fix put into Firefox itself there will be those millions of users out there that will not upgrade.

    A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
    *http://forums.mozillazine.org/viewforum.php?f=25
    The helpers at that forum are more knowledgeable about web development issues.<br>
    You need to register at the MozillaZine forum site in order to post at that forum.

  • Error message TD427 (A text element is not defined for form J_1IEWT_CERT)

    Hello,
    Q> I assign the SAP script form J_1IEWT_CERT to 'SPRO=>Withholding Tax Certificates for Vendor and Customers' and was trying to see the print preveiw. But once I press printpreview button error comes "ELEMENT TITLEDET WINDOW TITLEDET IS NOT DEFINED FOR FORM J_1IEWT_CERT" and i can't see the printprview.
    Same thing I tried with the copy of J_1IEWT_CERT from 000 client to ZJ_1IEWT_CERT; but same error is coming.
    If i try the printpreview through SE71 it shows without error.
    Thank You.

    "test printing" via SE71 only prints what exists in the form. Here your form is missing TITLEDET window and element.
    The print program tries to print TITLEDET but it does not exist. Could you check SAP notes to get correct versions of print program and sapscript form.

  • Namespace not defined in the SWCV error

    Hi Experts ,
    I am new to PI.
    I am executing one IDOC to IDOC scenario for MATMAS05.
    I have done all the source side, integartion server and destination side server configuration.
    Source:SAP R/3 server
    Int server:PI
    Destination : SAP ECC 5.0
    I have imported the MATMAS05 IDOC.
    Created one name space under my predefined SWCV.
    Then i copied that IDOC to both the source and destination in message mapping.And map all the red mark required filed of the target with source.
    While activating the message mapping I am getting one error.
    Namespace http://piidcoctoidoc is not defined in the software component version MANISHASC2 , 1.1 of manisha.co
    and
      Mapping not sufficiently defined
    Can anybody help me how to resolve this?
    Thanks
    Manisha

    hi Manisha
    while activating the objects which you have created , you must be  getting this error\
    so while activeting the object select your Software component also and activate both then you will not be getting the error
    becuase every time you generate a namespace in any software component then you need to activate the software compnent along with the object
    if you left SWC and activating only the object then you must be getting this error.
    for activating any objevt your software component must be activated first
    what you must be doing ,,,,,, you are activating only the object  and not your software component
    so activete both first your software component and then your object
    Thanks
    sandeep
    If helpful reward points
    Edited by: sandeep sharma on May 16, 2008 1:04 PM

  • Depreciation posting rules are not define for area 00 in company code

    Dear Expert,
    Would like to seek for help, when I run a customize report (AUC without PO not yet capitalized report the system prompt the error depreciation posting rules are not define for area 00 in company code only on the march 2011 on ward but before march 2011 the report is able to display as usual.
    Between., does SAP have the standard report to list the asset which is AUC and not yet capitalized?
    My version of SAP is ECC 6.0.
    Kindly advise.
    Regards,
    Karen

    Hi,
    Thank you for the prompt reply, why the system prompt the error depreciation posting rules are not define for area 00 in company code only on the march 2011 on ward but before march 2011 the report is able to display as usual?
    Please help.
    Regards,
    Karen

Maybe you are looking for