Version 11.2 for Windows failure to install

I tried to update iTunes this morning for windows, 64 bit. When I tried to launch iTunes, I got this message:The prodecure entry point ADiAdlD_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll.
I tried to reinstall the new version using the repair feature. Same results.
This was followed by a message: iTunes was not installed correctly. Please reinstall iTunes.  Error 7 (Windows error 127)
What is the problem?

Hi Roland,
The article below has some tips that should help you get this sorted.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Resolution
These behaviors can occur if the iTunes installer has insufficient privileges to cleanly update iTunes. To resolve the issue, remove iTunes thoroughly, and then give the iTunes installer administrator privileges.
Follow these steps to resolve the issue:
1. Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order. Then, restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components, may have unintended affects.If you encounter an error while uninstalling, try repairing the affected component:
In Add/Remove Programs (Windows XP) or Programs and Features (Vista and later), select the component and look for either Change or Repair.
Click and follow the wizard to repair the affected component.
Remove the affected component after repair.
2. Verify iTunes and related components are completely uninstalledIn most cases, removing iTunes and its related components from the Control Panel will remove all supporting files belonging to those programs. To fully resolve these issues, manually remove any remaining iTunes-related folders listed below.On 32-bit and 64-bit systems:
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple\Mobile Device Support
C:\Program Files\Common Files\Apple\Apple Application Support
C:\Program Files\Common Files\Apple\CoreFP
C:\Program Files\iTunes\
C:\Program Files\iPod\
Note: Follow the additional steps at the end of this article if you receive the alert "Cannot delete iPodService.exe: It is being used by another person or program" when trying to delete this folder. Some of the folders above may not be found on all systems.
On 64-bit systems: 
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
C:\Program Files (x86)\Common Files\Apple\CoreFP
C:\Program Files (x86)\iTunes\
C:\Program Files (x86)\iPod\    
Note: Follow the additional steps at the end of this article if you receive the alert "Cannot delete iPodService.exe: It is being used by another person or program" when trying to delete this folder. Some of the folders above may not be found on all systems.
3. Reboot your computer.4. Download the iTunes installer. When prompted to select what you want to do, choose to save it to your computer.5. Install iTunes.
Right click on iTunesSetup or iTunes64Setup.
Windows Vista, Windows 7, and Windows 8: Select the 'Run as administrator' option.
Windows XP: Select the Open option.
Finish installing iTunes.
-Jason

Similar Messages

  • Newest version of Firefox for Windows will not install.

    After the auto update of Firefox failed to work, I downloaded the full installation file for the most recent version of Firefox (28.0). The setup file extracts but doesn't install. I also cannot find the extracted file(s) on my computer. I have tried uninstalling older versions, running antivirus, anti-rootkit and malware programs and also disabling those programs before trying to install. Any other suggestions I can try?

    Download and save the full Firefox installer from here :- http://www.mozilla.org/en-US/firefox/all.html

  • TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4)  I have done everything the troubleshooting article has said and it is still not working properly.

    'm having a problem with downloading and installing the new version of itunes for windows (11.1.4)  I have done everything the troubleshooting article has said and it is still not working properly.  I have even done a repair to see if that works and it has not.  Has anyone else found a new way to get it working?

    Try Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer.  Any help is appreciated!

    I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer.  Any help is appreciated!

    Hey socestlavie,
    Thanks for the question. I understand you are experiencing issues with iTunes for Windows. The following resource may help to resolve your issue:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Thanks,
    Matt M.

  • Can someone help me with installing the latest version of iTunes for Windows 7 64 bit Home Premium?

    Latest version of iTunes for Windows 7 64 bit Home Premium downloads just fine.  But, fails to install. 
    "Unblocked and gave all permissions."  Still, no go. 
    I see by reading the other posts on this forum that I am not alone.  Any help?
    Frustrated!

    Ok...This was very odd.  I left the installation program, in what I considered a frozen state on screen.  After about 30 mins, to my surprise, It installed!  I'm not computer literate, so, I don't know what to say.  But, to just WAIT for it to respond!  Good Luck!

  • Why the new version of itunes for windows is falling to install properly , am I the only one with this problem?

    how to fix it?, i already try to install an older version, also uninstalled the whole thing and reinstalled it with no luck, and always at mid installation an error message appears saying:
    I don't know what to do, not an expert at all on this things... any ideas?

    Hi Shanny33,
    Thanks for using Apple Support Communities.  This article has steps you can take for the error you're seeing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Ari

  • How can I make the newest version of iTunes for Windows run faster?

    I know I'm not the only one when I say that iTunes is by far one of the slowest programs on my computer.  I'm running Windows 7 and running the most recent version of iTunes for Windows.  Does anyone have some tips to make it run faster and smoother?  I have Genius and Ping disabled, but I'm not quite sure what else I can do.

    The newest version of iTunes should install if you are runnig 10.7.
    Do you get any error messages?
    Allan

  • 64-bit version of Quicktime for Windows

    I'm running 64-bit version of Windows 7 via bootcamp.  I'm running 64-bit version of Microsoft Office 2010.  I have the latest version of Quicktime installed 7.7.3 something.  I can play the file on the desktop no problem, but when I try to insert the file into Powerpoint or play a file that I inserted previously into Powerpoint on a different system, it says either Quicktime unavailable or you need a 64-bit version of Quicktime in order to insert the file. 
    So, exactly where is a 64-bit version of Quicktime for Windows because apparently the one on the Apple website for Windows is not 64-bit.  Everyone keeps saying download the 64-bit version of Quicktime.  Great, tell me where it is.  There is no option for 64-bit on the website.  It doesn't even say it is 64-bit.  It just says its compatible with Windows 7.  Powerpoint 2010 64-bit MUST have a 64-bit version of Quicktime in order to insert or play any Quicktime file.  The OS doesn't give a rats @ss one way or the other.
    The file I previously inserted was playing on a system that apparently had a 32-bit version of Powerpoint installed.  That machine defaults to VLC player on the desktop.  It has no issues with the file.  It's the Quicktime Player mismatch on my machine that is giving me grief.  If I knew Office was going to be a PITA if I installed the 64-bit version I would have stuck with the 32-bit version.
    Ideas?  Where is the 64-bit version?  How do you tell it is 64-bit?  How do you force the installer to make sure it ONLY installs a 64-bit version of it?

    If Microsoft merely off their own decided that only a 64-bit version of QuickTime was going to be supported by them and did not both checking such a beast existed then this is perfectly believable behavior on the part of Microsoft and they should roast in **** for it.
    If Apple led Microsoft to believe that a 64-bit version of QuickTime was going to be released like a 64-bit version of iTunes for Windows has been released but then backed out then this is equally believeable behaviour on the part of Apple and then equally the guilty parties at Apple should roast in ****.
    It should be noted that the 64-bit version of iTunes is able to play videos via the 32-bit version of QuickTime. This suggests Microsoft programmers are weak with the force. This would tend to support my theory that Microsoft despite being the biggest software company in the world are better at making hardware than software.
    Moving on to trying to be more constructive…
    Clearly as things stand using the existing and only official version of QuickTime for Windows which is 32-bit only is not going to work in 64-bit Office. It might therefore be worth looking at trying the following.
    Uninstall completely Apple's 32-bit QuickTime for Windows (if installed currently)
    Install QuickTime Alternative - see http://www.free-codecs.com/download/QuickTime_Alternative.htm
    I have no idea if QuickTime Alternative is 64-bit, I have no idea if it will work in 64-bit Office even if it is 64-bit. However it does work in Internet Explorer for Windows, it is free and therefore will cost you nothing to try. If it does not work you can then always uninstall it.
    As another even more abtruse solution, you could try loading your PowerPoint file in to the free iWorks i.e. KeyNote via a free iCloud account. It will allow importing PowerPoint files and will even work in Internet Explorer.

  • Cannot uninstall previous versions of iPod for Windows

    Over a year ago, my roommate gave me his old iPod. I installed it and iTunes and it worked fine until the battery on the iPod died and everything went nuts with the iPod - iTunes worked fine.
    Now i have a new 30 gig video iPod, but I can't get anything working. I had to fight to update iTunes / Quicktime. Basically, I had to run:
    "C:\Program Files\Common Files\InstallShield\Driver\8\Intel 32\IDriver.exe" -Embedding
    from the command line. I don't know why, but it worked.
    Now I have three versions of "iPod for Windows" installed. I click to uninstall any of them (from add / remove programs) and nothing happens.
    I wouldn't care, but when I run iTunes with the iPod connected, it says "the software required for communicating with the ipod is not installed correctly."
    I've tried everything I can see, but I'm suspicious the three versions of iPod for Windows are conflicting with each other and / or iTunes.
    Can anyone offer any help?
    Thanks in advance.
    Sony Vaio Laptop   Windows XP  

    Yes it is, the iPod updater was integrated with iTunes when version 7 was released. As a back up, you might want to keep the last one in case you ever needed it but dispose of the rest, they are just taking up space.

  • Preveious versions of iTunes for Windows?

    I was running previous versions of iTunes for Windows without problems. With the latest versions, I have tried everything without success (uninstalling Quicktime, resinstalling Quicktime etc)
    Are the install files for prior versions of iTunes Windows available anywhere? All I need is music on my laptop. Great if I can install a prior version. Thanks! /Kenny

    You'll get various earlier versions of iTunes here: Old iTunes for Windows

  • I just downloaded the latest version of itunes for Windows and now itunes crashes every time i launch it

    I just downloaded the latest version of iTunes for Windows and now iTunes crashes everytime I launch it.  I have tried re-downloading and selecting Repair with no luck.  Any suggestions?
    thanks

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • How do I update or download the latest version of safari for windows xp

    How do I update or download the latest version of safari for windows xp

    Safari for Windows version 5.1.7 is the latest version available for Windows.
    http://support.apple.com/kb/dl1531
    For more on this:
    http://www.macworld.com/article/1167904/safari_6_available_for_mountain_lion_and _lion_but_not_windows.html

  • Where do I get an English version of iTunes for Windows?

    Where do I get an English version of iTunes for Windows?
    <Edited By Host>

    http://www.apple.com/support/downloads/quicktime716forwindows.html

  • How do you change the language of the dictionary on Safari from English (US) to (UK)? I'm using Windows 7 Home Premium and the latest version of Safari for Windows that I know of. Cheers in advance

    How do you change the language of the dictionary on Safari from English (US) to (UK)? I'm using Windows 7 Home Premium and the latest version of Safari for Windows that I know of. Cheers in advance

    92matt wrote:
    Cheers for the quick response, but do you know whow I would do that?
    Apologies I'm not the most technical of people!
    Open Regional and Language Options by clicking the Start button , clicking Control Panel, clicking Clock, Language, and Region, and then clicking Regional and Language Options.
    Lupunus

  • Older versions of Ipod for Windows

    IN looking at my add/remove menu in windows, I have eight versions of "Ipod for Windows" with various dates. Is it safe to uninstall the older versions?

    Yes it is, the iPod updater was integrated with iTunes when version 7 was released. As a back up, you might want to keep the last one in case you ever needed it but dispose of the rest, they are just taking up space.

Maybe you are looking for

  • Report for CS15 tcode with multiple material nos. in selection screen.

    I want to develop a report for cs15 but with multiple materials. Like in cs15 we enter the material and its plant, then click on multi level check box and get the output. But cs15 works only for a single material. I want to develop a report in which

  • Japanese fonts problem with Adobe Acrobat 6

    Hello,  I have been having this problem for a few weeks now.  We have Japanese multilingual XP and normal XP sp2 at our company and installed currently on the systems is Adobe Acrobat Pro 6.01.  There are two errors I am getting when working with the

  • Saving Query as xls file (I have searched and havent found this problem)

    I am trying to save a query as a xls file. The user can currently save the file to there desktop but excel warns them upon opening it that the file is associated with a different type of file do you want to continue. if you choose to continue then it

  • Collaboration Room Error

    Hi I have installed EP6 SP9 NW04 SR1 , I have installed KMC SP9 and have patched it to KMCSP9_P3 When i create a room, and then go into the room..i get this error on the "My Rooms" and "Related Rooms" iViews in the detail Navigation. The errors: Port

  • I'll explain. I downloaded the trial version of ps for 30 days. I connect my hard drive to compuuter

    I'll explain. I downloaded the trial version of ps for 30 days. I connect my hard drive to compuuter, I open raw files in bridge load a file into ps, after which I would like to elaborate the new hard drive to save it, but it opens a window that says