Version 4.0.1 is not displaying pages like version 4.

Since upgrading to Firefox 4.0.1 I have seen problems with some pages displaying. I am a web designer and pages that are error free which displayed fine in version 4, and work in Chrome, Safari and versions of IE, are not display properly in the new updated version of Firefox.

Add a style rule clear:both to the DIV .center
<pre><nowiki>.center { clear:both; }</nowiki></pre>

Similar Messages

Safari will not display pages

I recently updated to Mountain Lion on my late 2010 MacBook Air. Today, I attempted to use Safari and I can get no page to display. Safari itself loads, but no pages will load. I use Chrome as my default browser and only pull up Safari occasionally, so I can't say for sure that I have used Safari since the upgrade, however, I probably have.
Today, I was invited to a Go To Meeting online meeting. I opened the page in Chrome and it downloaded the GTM app. I clicked on that and it tried unsuccessfully to download required files from it's server via it's own app. I tried this several times without success and then thought to try the entire process using Safari. That is when I discovered that Safari would not display pages. It acts as if it has no connection to the internet. Safari loads and the progress bar moves a little across the top then it just stops. It never times out or complains; just nothing.
Given that the GTM app looks also like it cannot connect to the internet, I went looking at some of the suspects. My firewall is turned off. My network status comes up clean when I test it. ...and more oddly, Chrome seems to have no problems with any and all pages.
I searched for similar problems with solutions and one recommendation was to boot into safe mode to see if that made a difference. I did that and there was no difference. Since I don't use Safari routinely, it is stock, as delivered.
Any ideas for how to troubleshoot this?
Thanks,
Bill

Select  ▹ System Preferences ▹ Network ▹ Advanced ▹ Proxies. If any proxies are selected, deselect them, apply your changes, and try again. You must apply the changes before they take effect. You don’t need to change the other settings.

Cross References Will Not Display Page Number

Got some documents created in InDesign CS3 (MAC). When bringing them into CS4 (Windows) and trying to create a paragraph cross-reference the page numbers will not display. All the other text in the cross reference ("paragraph", the word "page", etc.) displays correctly. Even the cross reference under the "hyperlinks" toolbar shows nothing (instead of the usual # indicating a page number).
However If I copy some of the same pages into a new document and create a cross reference in it the page number displays correctly. But since it's over 300 pages I really would hate to have to do that!
Any ideas?

Is it maybe because CS3 does not include the cross references function (not a feature until CS4)?
That's a real problem if we use an outside source to create a lot of our documents and they're working in a previous version.

Design View Not Displaying Pages with any Formatting

I asked this question in another thread and somebody locked it. The question is not answered. My Design view is not displaying my files with any formatting. I can view them in a browser, but not in Design view where I can see my work as I'm working. While I can upload files to the remote server (host provider) the links got screwed up so files on the remote server don't show any formatting either. Every link, thousands of links, are off by one word (folder) from where my site was residing on my hard drive. When I try to make a change to the links manually then I can no longer view them with any formatting in my own browser either.
On my local broswer on my PC the address line reads: http://localhost/folderNameIneedToDelete/filename.php
On the live website (for my homepage) the address line reads http://websiteName.com/folderNameIneedToDelete/index.html
(Here is the text from another thread that was improperly locked)
I just added a remote server to my site so I could begin uploading files to my host provider. When I saved the setup I saw a message popup about the cache changing. Now when I try to view a file in Dreamweaver in Design View it doesn't recognize any of the external style sheets. It displays with no formating.
I can still view the pages in a browser and they look appropriate, just not in Design View where I can continue working on the site as I've been doing.
How do I get Design View to display my pages properly again using the .css pages that apply to each page design?
Thanks,
Robert

Murray, thanks for all your assistance.
Before I edit thousands of links again I want to confirm I've interpreted all your info correctly. If I setup everything as follows all my pages should work in Design View, browsers accessed from the "Preview/Debug in browser" icon in Dreamweaver and most importantly in a live environment at a host provider:
Site Setup
Site - Site Name: anything including spaces
Site - Local Site Folder: C:\wamp\www\rootfoldername\
Servers - Testing Server (Testing: checked)
Server Name: Testing Server
Connect Using: Local/Network
Server Folder: C:\wamp\www\rootfoldername\
Web URL: http://localhost/rootfoldername/
Remote Server - Maintain synmchronization information: checked
Remote Server - Automatically upload files to server on Save: unchecked
Remote Server - Enable file check-out: unchecked
Testing Server - Server Model: PHP My SQL
Version Control - Access: None
Advanced Settings - Local Info - Default Images Folder: C:\wamp\www\rootfoldername\_images\
Advanced Settings - Local Info - Links relative to: Document
Advanced Settings - Local Info - Web URL: http://sitename.com/
Advanced Settings - Local Info - Case-sensitive links checking: unchecked
Advanced Settings - Local Info - Enable Cache: checked
Advanced Settings - Cloaking - Enable Cloaking: checked
Cloak files ending with: unchecked
Advanced Settings - Design Notes - Maintain Design Notes: checked
Advanced Settings - Design Notes - Enable Upload Design Notes for Sharing: unchecked
Advanced Settings - File View Columns - Name: Built In - Show
Advanced Settings - File View Columns - Notes: Built In - Hide
Advanced Settings - File View Columns - Size: Built In - Show
Advanced Settings - File View Columns - Type: Built In - Show
Advanced Settings - File View Columns - Modified: Built In - Show
Advanced Settings - File View Columns - Checked Out By: Built In - Show
Advanced Settings - Contribute - Enable Contribute compatibility: unchecked
Advanced Settings - Templates - Don't rewrite relative document paths: checked
Advanced Settings - Spry - Asset Folder: C:\wamp\www\rootfoldername\SpryAssets\
Site File Structure - place files in the following folders:
C:\wamp\www\rootfoldername
webpages (html & php)
_images - [folder] (there are numerous image folders beginning with _images) containing .jpg and .png files
_includes - [folder] containing attached .php files for the header, navigation and footer attached to every page
_scripts - [folder] containing .js script files
_styles - [folder] containing .css files (external style sheets)
Connections - [folder] contains one php file (databasename.php)
SpryAssets - [folder] containing system generated .js files .css files and .gif files
ZendFramework - [folder] - I have no idea if the files in this folder are necesary and why it was placed here many months ago
** Links **
Remove the leading / from every link in every file
HTML5 shiv
using an external link will always reflect the latest changes(Question) - If I link to this .js file externally at google instead of linking to a current copy in my _script folder could future changes to this external .js file cause future problems with the webpages that have this file attached?
Remote Server
Setup a remote server using the ftp address settings provided by the host provider. (Question) Any settings defined for the future Remote Server (the first remote server was deleted when problems occured) will not cause any harm to anything involving the Testing Server such as viewing webpages in Design View, browsers accessed from the "Preview/Debug in browser" icon in Dreamweaver and will not cause any harm to any files eventually put to the host provider via that future Remote Server. Is that correct?
Murray, thanks again for your help,
Robert

Acrobat 9 Pro: Message "An error exists on this page. Acrobat may not display page correctly.

Hi everyone,
I posted this in September: "Over the past week, I have received pdfs from 2 different graphic design contractors that do not open correctly in Acrobat 9 Pro. There is an error in the document and when I scroll to the page where the error is, I get: "An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." I did this, and the contractor remade the pdf 3 times, and I still couldn't open it. This contractor is already using CS5. For the problem today, I haven't asked for it to be remade yet--decided to see if I could find out if anyone else is having the same problem. The second contractor is using CS4. The only thing that I have done differently at my end over the past week is upgrade CS4 to CS5. I already had Acrobat Pro 9 so I didn't update it when I updated my CS5 products. Should I have upgraded Acrobat 9 anyway? Somehow, it doesn't feel right that this is the problem. Any info on this would be appreciated."
I got one response from that posting, suggesting that the pdf was corrupted over email. That wasn't the problem.
What I didn't say above is that whenever I got an error message upon opening the pdf and clicked OK, I got another message: "Insufficient data for an image." I found that one or all of the images in the pdf were missing. Upon further investigation, the contractor and I found that sometimes the error message pointed to a specific font used--that being a Helvetica Bold font. Once we substituted it with a Helvetica Neue LT Std Adobe Opentype font, we no longer had an issue.
However, the problem rose it's ugly head today--what, 6 months later! I'm talking about 2 different pdfs this time.
For PDF#1, I got this error message about the font: "Cannot extract the embedded font 'JNAGNS+HelveticaNeueLTStd-Bd'. Some characters may not display or print correctly." When I click OK, I get another: "Insufficient data for an image." The images don't show up in the pdf. What I don't understand about this pdf is that this is one of those that was fixed in September. The only changes made in the document was to paragraph text--none to the text in the images. When I opened the revised pdf today, I am getting the same message again. This makes no sense.
I returned to my September blog to see if any further advice had been posted, but nada--not even anything from Adobe about it. I goggled until I found where someone suggested running a "Report PDF syntax issues" analysis in Preflight. I did that and even though the analysis showed the pdf passed, I checked the fonts in the list and saw that the one pointed to in the error message showed that a long list of glyphs were missing on both pages of the pdf. I have asked my contractor to replace her font with a new one, in case it has gotten corrupted. Haven't a new pdf to open yet.
Then when I opened PDF#2, I got the message: "An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." When I ran the "Report PDF syntax issues" analysis in Preflight, I found got this warning: "Invalid operand(s) for operator (1 match on 1 page)". I clicked through and under "Page Description Errors/Invalid operand(s) for operator", it identifies Operator Name, Stream State, Operators Read, and Traversal Path. Under "Trigger Values" is says "Invalid operand(s) for operator: is true". None of this means a thing to me so I can't figure out what the problem is.
Let me say this: Both the contractor and I are using CS5 and Acrobat Pro 9, on Lion. If it helps, the contractor also sent one of the problem pdfs back in September to my boss who is running Acrobat Pro 9 on Windows 7 and she got the same messages.
Does anyone out there have a suggestion for us? PLEASE HELP!!!!

Thanks to all for posting suggestions. As it turned out, the contractor who was having a problem reinstalled Acrobat 9. She works from home and is emailing the pdfs to me. Things were running smoothly until this past week, when the problem started again. Whenever I get a pdf that won't open properly or print, I asked her to zip it and it is no longer a problem. Last week, I had the same problem start with a contractor in Florida and she also zips the pdf when there is a problem. Now I am thinking the problem might be at my end. I wonder if something is happening to them when they come through our firewall at work. I asked IT about it before but they didn't have a clue what the problem might be. Right now, zipping is the answer...who knows how long that will continue to work.

Webi Page View Not Displaying Page Size Correctly.

Hi Everone,
I have an issue with one report where the page size sttings do not translate when viewed in HTML Page View.
Figure one is the report as seen in the editor - as you can see the page is displayed correctly - A4 Portrait:
And, when the report is viewed in PDF mode - again, no issues:
But when viewed in HTML page view - it blows out the width of the page:
Now this report, as far as I can tell, is set up no differently than 6 others that are designed to be printed as PDF, all of which do not display this behaviour.
We design them to be printed as PDF but present them to the user in HTML Page view in order to allow injected JavaScript’s in the report to be run. This does not happen when you jump directly into PDF mode.
I have checked in design view and I don't have any wayward report elements pushing out the width and the PDF renders correctly which would not happen if there were hidden elements causing issues, it would render a bunch of blank pages.
So, I am at a loss. The page view is correct in edit mode and in PDV view mode but not in HTML page view. Has anyone else had this issue? I can’t work out why this happens only in one report when all the others work properly.
HELP!!!
- Nick

Hi,
I think it may be <div class="html5gallery-viral-0"> (contains the social media buttons) // screencasteu.worldsecuresystems.com/AP/2013-08-01_1033.png
It's the only element that isn't in sync with the other elements on page, when compared to home.html for example.
Kind Regards,
Alex Pavelescu

Acrobat 9 Pro: Message "An error exists on this page. Acrobat may not display page correctly. Please

Over the past week, I have received pdfs from 2 different graphic design contractors that do not open correctly in Acrobat 9 Pro. There is an error in the document and when I scroll to the page where the error is, I get: An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." I did this, and the contractor remade the pdf 3 times, and I still couldn't open it. This contractor is already using CS5. For the problem today, I haven't asked for it to be remade yet--decided to see if I could find out if anyone else is having the same problem. The second contractor is using CS4. The only thing that I have done differently at my end over the past week is upgrade CS4 to CS5. I already had Acrobat Pro 9 so I didn't update it when I updated my CS5 products. Should I have upgraded Acrobat 9 anyway? Somehow, it doesn't feel right that this is the problem. Any info on this would be appreciated.

Thanks for the quick reply. Would zipping the pdf protect it through email...like I said, this is the first time I've had this problem and I've been getting pdfs though email for years.

Firefox 3.6 does not display pages correctly

I recently upgraded to 3.5 beta 4 and it worked ok. 2 weeks ago it stopped displaying pages correctly. Uninsalling and reinstalling did not cure problem. I unistalled and installed v3.6. Same problem.
I could provide a screenshot of Mozilla home page. Backgrounds, table borders and some inages to not display. I have disabled all plugins and "load images automatically" is checked.
The images and background of this page do not display. I checked with K-meleon and IE.

If you have increased the minimum font size then try the default setting "none" as a (too) high value can cause issues.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
*https://support.mozilla.org/kb/Changing+fonts+and+colors
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with overlapping text.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
On other platforms instead of Tools > Options use:
*Mac: Firefox > Preferences
*Linux: Edit > Preferences
*Windows: Firefox > Options
Press F10 if the menu bar is hidden on Windows and Linux or use "Firefox > Options/Preferences"

Equium M50-164: IE not displaying pages correctly

I have a Toshiba new Equium M50-164, but it will not display my internet page correctly at http://myweb.tiscali.co.uk/lorne.anderson/Bridge/
It should look like this:
http://myweb.tiscali.co.uk/lorne.anderson/NormalView.gif
with the Bridge anaylser logo in the header but on my Toshiba it looks like this:
http://myweb.tiscali.co.uk/lorne.anderson/ToshibaView.gif
I have 4 other computers that all display it correctly (running XP,2000,98SE) and several friends say they can see it OK. If I look at the unlying html code via right click and view source in IE the bit that displays the logo should read:
"align="left">
</td>
<td width="610" align="center" height="65"><a href="../index.html" target="_blank"><img border="0" src="Images/Bridge%20Analyser.gif" width="311" height="57" align="left" alt="Opens my software home page to see more programs">
</a>

<a href="../index.html">
but on the Toshiba view source displays:
"align="left">
</td>
<td width="610" align="center" height="65"><a href="../index.html" target="_blank">
</a>

<a href="../index.html">
Note the 2 blank line where the code to show the logo should be. If I open the page from files on my hard disk it display correctly so my guess is that Toshiba have done something to overide default IE security settings but I can't see what. How can I get IE on my Toshiba to work the way Microsoft designed it to work?
Just as a check, can anyone using this forum read the page correctly or do you also get the missing logo?

Out of curiosity are you running any toolbars, add-ons or content filtering for IE?? As you pointed out the source code isn't the same as the original it's been altered and since the <IMG> html tag is missing that would explain why Internet Explorer isn't loading the image.
I can't see anything particularly wrong with the code however your filename does have a space in it "%20" and might be triggering some kind of content filtering.
As a suggestion rename the image file removing the space then update your html page and try again.
Richard S.

ICloud Drive on Mac not displaying folders like on internet

Hi,
I seem to be having a problem as the iCloud Drive in the Finder is not displaying the folders that are present on the iCloud on the internet.
Would really benefit from some help about this.
Thanks!

Locally only folders that have files in them are displayed. In my iCloud Drive folder I have the following:
If you haven't saved a Numbers file to the iCloud Drive the Numbers folder will not show on your Mac. You need to save from the application to the iCloud Drive and it will create a folder and save the file to it.

I am in Mexico, but do not want pages like google or yahoo to redirect to .mx sites. How do I make this stop happening?

I am in Mexico, and pages like google or yahoo redirect to .mx sites. I would like to know how to keep them from redirecting, to stay at google.com / yahoo.com

The problem is that what you are asking for is something you know you aren't going to get - specifically the
I would also like Apple to provide a projected timeline for these fixes. Not a commitment, just a projected time-line.
You know that is not how Apple do business - ever. While it's entirely possible they will ultimately meet your wishes in terms of the fixes, updates and added features, it won't be part of a 'deal' but just because they will continue to roll out their product plan as if nothing had ever happened.
On the other hand, I have to say that I agree entirely. Much could and should be achieved simply by building on the platform and advancing it. It isn't an unreasonable wish to see that happen and to know it will happen. Just not Apple's way to tell anyone.

Firefox does not display page information correctly

On the form on http://ppbm5.com/submission.html select a raid level of Raid 0 for the OS disk and select the Number of OS disk next. The only choices you see are 3, 4, 5 and 6. The same applies to the project disk question and the output disk question.
Using Chrome or Internet Explorer the number of disks shown to choose from are 2, 3, 4, 5 and 6.
Firefox hides or forgets the option for 2 disks.
The form used shows up correctly in the Form Maker site, it shows up correctly in Dreamweaver, it shows up correctly in both Chrome and Internet Explorer.
My only conclusion is that this is a Firefox issue. What can be done to resolve this?
As it currently is, one can only tell visitors to only use the form with Chrome or IE.
PS. I tried with FF 4.0 beta 10 and the problem persists.
BUT, the strange thing is on two other machines, with FF 3.6.13 the problem does not occur, so something must have messed up my regular system to prevent the correct display of the page.
I tried disabling add-ons, extensions and plug-ins, but that did not help.

Did you use the same [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] for the test with 3.6.x and 4.0 ?
Looks like a problem with JavaScript (Ajax).
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
If you the Firefox 4 beta version with the same profile then you should create a new profile exclusively for the 4.0 beta version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

User account control message displays every time, minimise and close buttons not displaying, pages slow to load

Every time I try to open a page, I get a user account control message asking for permission to proceed. I have tried to adjust the frequency of this but have been unsuccessful. This has only started to occur recently.
Pages are slow to load and do not properly display the close, minimise etc buttons in the top right corner (these are blacked out)
I have tried to reset firefox. This does not fix the problem.
The problem does not occur using Internet Explorer

There are several things to try.
Some problems occurs when your Internet security program was set to trust the
previous version of Firefox, but no longer recognizes your updated version as
trusted. Now how to fix the problem: To allow Firefox to connect to the Internet
again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version)
* Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet?esab=a&s=Configure+firewalls+&r=0&as=s Configure firewalls so that Firefox can access the Internet.]''' {web link}

Upgrade signup verify link does not display page! ??

Just upgraded & signed up (to sync) email (from you) w, "Verify" link brings "Page can \not be displayed." I have screen captures:; how to include them for you?

This is a problem related to Outlook. The bug is reported and the engineers are working on it. In the meantime, as a workaround, please use a different email client (maybe a webmail version of your inbox) to read the email.

Will not display page that is used often...

Hi.
I use rapidshare.com and my home page is blingo.com. Yesterday all was well. I was downloading files, and searching with my home page. Today when I power on the computer my homepage does not load anymore. Neither will rapidshare.com. I have another computer in which i tried to access the pages and it works fine as well as my iPhone. I've tried to repair permissions for my computer and I reset Safari but no luck. Any ideas on what can be happening?
Thanks in advance

Is it maybe because CS3 does not include the cross references function (not a feature until CS4)?
That's a real problem if we use an outside source to create a lot of our documents and they're working in a previous version.

Version 4.0.1 is not displaying pages like version 4.

Similar Messages

Maybe you are looking for