Version 4.0.1 won't remember login information for my financial websites?

Each new day I have to reenter my login information for my financial websites, e.g. Chase, Citibank, etc. After I power down and turn the computer back on the information is lost. Does not happen with non-financial websites. I think, somehow, the cookies are being erased after powering down.

What was the exact wording of the error message? If it said network timeout, try disabling the antivirus and firewall on the computer during the download and update. Kaspersky is especially bad.

Similar Messages

Safari Won't Remember Login + Passwords

Safari just won't remember login names and passwords for sites! Even though I fill in the info and check the box that asks to remember, it does not.
BTW, it works fine on my main user setup, but not on a secondary user.
I have deleted the Safari .plist preference files, the keychain access .plist files and deleted files within the Keychain Access application and restarted the machine. Problem still exists.
Can anyone help?
Frank

I am curious about this, too.
Before I delete any of the suggested files, will I have to re-enter my log in names and passwords?
Usually when Safari has a memory lapse, it doesn't recall both log in name and password. When I attempted to log in to this forum today, Safari remembered my log in name, but not my password. Is there an option for Safari or keychain to remember only log in names, but not passwords?
Safari will usually prompt me to add log in name and password the first time I create it for a new site, but not always. It didn't do this when I re-entered it today, but after I logged out, it allowed me to log back in without requesting log in or password.
Thanks in advance for any info on this.
Dave

TS3276 I just upgraded to 10.8.2 and Mail is having a problem. It won't remember my password for getting mail; but it does remember the password for sending mail, i.e., smtp. Does anyone know of a fix?

I just upgraded to 10.8.2 and Mail is having a problem. It won't remember my password for getting mail; but it does remember the password for sending mail, i.e., smtp. Does anyone know of a fix?

The solution surprised even me, and we've been using Macs since 1984 (still have an original 128K).
I contacted Apple support, and because we had just upgraded yesterday, clicked on the "exception" button as opposed to paying the $19.99 one-time support fee. An Apple tech called and the problem was solved in two minutes.
Somehow during the installation of OS 10.8.2 (over 10.6.x) the key chain data for my email ISP login password got corrupted. The solution was to delete both the POP mail and SMTP entries in my keychain.
Back to Mail, it asked for the POP password, I entered it and bingo, mail got busy downloading. Interestingly, the password was also entered into the SMTP panel.
So, that's it. Thanks for you response, Mr. Hoffman, and regards.

I have lost my login information for cellular data account. How do I retrieve it?

I have lost my login information for cellular data account. How do I retrieve it?

I called AT&T at 1-800-331-0500 and asked for IPad support. They are going to send me a new SIM card. This will solve the problem. Thanks for your help.

I've stored login information for many sites but on some sites I've to login manually. What to do?

I'd stored login information for Facebook. Earlier firefox used to fill in the login information but now it doesn't . What to do?

You could try going into settings, Safari, auto fill then turn on names and passwords.

Mavericks Mail won't send login information to IMAP server

I am having a problem with Mavericks Mail not connecting to the Dovecot IMAP server. There appears to be many posts about similar problems, but none have the exact symptom I’m seeing.
Mail appears to not provide login information to any of my IMAP accounts. The iPad, iPhone, and Thunderbird on the same Mac all work with the same credentials. Just Apple Mail on the Mac fails. It fails for all user accounts on the same Mac. This has been a problem for a long time.
Connection doctor seems to indicate Mail is not sending login information. In fact, connection doctor shows the only thing working is the smtp server that doesn’t require a login. Everything else fails.
I’ve rebooted the Mac and the mail server.
I’ve repaired disk permissions.
I’ve recreated the account.
I’ve create a brand new account.
I’ve removed cache files.
I’ve re-indexed mail files.
Nothing works.
Here is the relevant connection doctor log:
INITIATING CONNECTION Jul 24 19:59:13.847 host:**********.*****.*** -- port:993 -- socket:0x0 -- thread:0x608000868640
CONNECTED Jul 24 19:59:13.939 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:**********.*****.*** -- port:993 -- socket:0x6000002d97c0 -- thread:0x608000868640
READ Jul 24 19:59:13.939 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:**********.*****.*** -- port:993 -- socket:0x6000002d97c0 -- thread:0x608000868640
* OK Dovecot ready.
WROTE Jul 24 19:59:13.939 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:**********.*****.*** -- port:993 -- socket:0x6000002d97c0 -- thread:0x6080002687c0
1.20 CAPABILITY
READ Jul 24 19:59:13.940 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:**********.*****.*** -- port:993 -- socket:0x6000002d97c0 -- thread:0x6080002687c0
* CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS UIDPLUS LIST-EXTENDED I18NLEVEL=1 AUTH=PLAIN
1.20 OK Capability completed.
WROTE Jul 24 19:59:13.944 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:**********.*****.*** -- port:993 -- socket:0x6000002d97c0 -- thread:0x60800046e080
2.20 AUTHENTICATE PLAIN
And the relevant Dovecot log entries:
dovecot: Jul 24 19:59:13 Info: auth(default): client in: AUTH 1 PLAIN service=imap secured lip=***.***.***.*** rip=***.***.***.*** lport=993 rport=60869
dovecot: Jul 24 19:59:13 Info: auth(default): client out: CONT 1
dovecot: Jul 24 19:59:13 Info: imap-login: Disconnected (auth failed, 1 attempts): method=PLAIN, rip=***.***.***.***, lip=***.***.***.***, TLS
I believe the “WROTE” log line in Mail cooresponds to the “client in” line in Dovecot. The next line is a continuation going back to Mail. But, Mail never seems to read or process it. When Dovecot gets a successful login from Thunderbird, the login credentials were displayed in the log with another “client in” line.
Here is what I am using:
OS X 10.9.4
Mail version Version 7.3 (1878.6)
Dovecot version 1.1.7
Where do I go from here? Has anyone seen this symptom before? How do I get Mail to send credentials to an IMAP server?
Thanks from a first time poster !

Try MD5 as the authentication method.

I upgraded from 3.6.13 to 10.0 and lost my web site login information for most (all?) of my bookmarked websites.

Firefox remmembered my logins with 3.6.13. After upgrade, no logins are3 filled in when I go to the site.
I tried looking at my profile. The only profile I can find is the one created by 10.0 and it obviously doesn't contain my old login info. Is there a backup of the old profile anywhere? I have searched but can't find. Is there a way to restore the missing profile?
Thank you, G. Hunter.

Your above posted system details show multiple Java Console extensions. 
You can uninstall and remove Java Console extensions, you do not need them to run Java applets.
See:
* http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
You can disable the Java Quick Starter extension if you have it.
* Tools -> Add-ons -> Extensions
* Control Panel -> Java -> Advanced tab -> Miscellaneous -> Java Quick Starter (disable)
Do you still see those names in the Password Manager?
*Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
Do you mean names and passwords in the Password Manager or do you mean that you are no longer logged on to (remembered by) websites after closing and restarting Firefox?
 
There is a difference between remembering the name and password in the Password Manager and a "remember me" check box on a web page to log you in automatically. 
The latter usually involves the creation of a special "remember me" cookie that is stored on your computer and that is send to the server. 
If that "remember me" cookie is removed or gets corrupted or is not send to the server then the server won't remember you anymore and you need to sign in once again.
* http://kb.mozillazine.org/Cookies
* http://kb.mozillazine.org/Password_Manager

Missing DataBase Login information for deployed VS2008 w/Crystal Report

I'm creating a Windows Form application using VS2008 Pro and the basic Crystal Reports (included).
I've successfully added a crystalreportviewer control and a crystal report (.rpt) to my form. I've written the following code in the code behind to programmatically load/bind the report to the viewer. Everything works fine on my development machine (or any machine that has Visual Studio installed). Where I'm encountering problems is when I deploy the application to a machine that does not have VS installed (I have downloaded and installed the "Crystal Reports Basic for Visual Studio 2008 Redistributable Package" for the appropriate processor type on this non development machine) that I'm getting an error . It prompts for "DataBase Login". The ServerName, LoginID and Password are all there, but the "DataBase" field is empty and disable for user input.
Why is the DataBase information missing? How can I solve this problem?
(On a side note, I vaguely remember a property for enabling/disabling the prompting of the database login. I can't remember where this was again to double check if that is the culprit. But I'm pretty sure that I did mark it as to not prompt, since it's supplied in the code behind. Plus it doesn't prompt on the development machines. Only on the non-development machines).
Any help is greatly appreciated! Thanks.
The code executed in the PageLoad event of the form.
this.crystalReportViewer1.RefreshReport();
 ReportDocument reportDocument = new ReportDocument();
 #region Load Parameters
 ParameterFields paramFields = new ParameterFields();
 for (int i = 0; i < _parameterName.Length; i++)
 {
 ParameterField paramField = new ParameterField();
 paramField.ParameterFieldName = _parameterName;
 ParameterDiscreteValue discreteVal = new ParameterDiscreteValue();
 discreteVal.Value = _parameterValues;
 paramField.CurrentValues.Add(discreteVal);
 paramFields.Add(paramField);
 }
 crystalReportViewer1.ParameterFieldInfo = paramFields;
 #endregion
 #region Load Report
 string reportUrl = "";
 string exePath = Application.ExecutablePath.ToString();
 exePath = exePath.Remove(exePath.Length - 18, 18);
 exePath += _reportName + ".rpt";
 reportUrl = exePath;
 reportDocument.Load(reportUrl);
 #endregion
 reportDocument.SetDatabaseLogon("myUserName", "myPassword", "myServer", "myDataBase");
 crystalReportViewer1.ReportSource = reportDocument;

Edited by: mtech8 on Jan 9, 2010 3:03 PM. Corrected formatting issues to make post readable.

HI. Ludek,
Thanks for the tips. I tried both, but the problem presists.
On a side note, I did get my hands on yet another "non-development machine". This one ran with Window's Vista appeared to work (even with my original code).
The "non-development machines" that I've tested on are Windows 7 and Window XP machines. On these machines, when I commented out the reportDocument.SetDatabaseLogon line, when I try to load the report, it still prompts for the Database Logon information, however, it also has the "Database name" empty and disabled.
Since it worked on a non-development machine with Win Vista. I don't think there is a problem with references or the Crystal runtime packages.
As far as permission for the report to contact the database, I'm guessing there isn't a problem there either because the application does successfully connect to the database.
I'm connecting to a SQL2005 database and using the SQL Native connection.
On a side note: as for the enabling prompting, I just remembered that it was an option available when using Crystal Reports with a web project. Thus I couldn't find it here with a Window's Form project.

The other day I had downloaded the latest version of Firefox and now none of the icons for the different websites I normally go to are there?

As I said, the other day I had downloaded the latest version of Firefox and after doing so none of the icons for the different websites that normally go to are no longer there. Websites such as MSNBC, MSN, Most visited, that entire strip is no longer visible. I tired resetting Firefox and still nothing. Can anyone tell me how to get them to appear again? It's a hassle every time that I want to go to one of those sites I have to type it in the search bar, instead of just clicking on it as I did before. Please keep in mind if you answer, that I'm still learning about these things called computers and not very well versed in some of the things that you experts know:) Thanks

On Windows XP Firefox shows the menu bar by default and not the orange Firefox menu button that is shown when the menu bar is hidden. 
The menu bar is the toolbar at the top that shows menu items like File, Edit, View, History, Bookmarks, Tools, Help. 
You can press the F10 key or tap the Alt key to bring up the "Menu Bar" temporarily in case this bar is hidden (View > Toolbars or Firefox > Options).
The Navigation Toolbar shows the Back and forward button and the input field where you type the address of a site that you want to visit (aka location bar) and also has a search bar where you can type items that you want to look up with a search engine (Google).
See also:
*https://support.mozilla.org/kb/how-do-i-get-firefox-button
*https://support.mozilla.org/kb/Menu+bar+is+missing
*https://support.mozilla.org/kb/Browsing+basics
*https://support.mozilla.org/kb/Tabbed+browsing
You can attach a screenshot in case you still have problems with the toolbars to show what you want to change.
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.

Login information for RFC call

Hi there,
I would like to know if there is a way to authenticate a user via bsp and get that login information to make the RFC call to different systems.
i tried the to call an FM via RFC directly from abap and it forces me to login and it works but when i put that code to bsp. I just get a "page cannot be displayed" error.
I know i can enter an ID and password on sm59 for the connection but i need to let the user login
I am using this for a user creation tool.. instead of using su01 to create a user it will be done via bsp and would like to reflect the changes done when running the reports from SUIM
thanks in advance
Ryan

Hi Ryan,
I will assume your RFC Destination already trusted system and using current user logon (see my previous reply).
However this still prerequisite for the next step.
Now, please correct me if my understanding is wrong.
In your reply, you have at least 2 System, right?
S1 & S2.
Where S1 has BSP Application (Ex:/ FormRegistration)
And S2 is where you control the user and Function Module.
Do you put, generic user for all BSP Service in System S1?
You can create another BSP Application in System S1 (Ex:/ CallingFM)
but this time don't put default user in BSP Service.
And from BSP Application FormRegistration, you create 1 button to call the BSP Application CallingFM.
I will give you sample code:
FormRegistration: address:http://systemS1.sap.com/FormRegistration/page1.htm
HTML Part:
===========
<HTML>
<input type="button" value="Register the user" onclick="submitUser();">
<script>
 function submitUser(){
 document.forms[0].action = 'http://systemS1.sap.com/CallingFM/page1.htm';
 document.forms[0].target = '_new';
 //it will open new window, just put it empty if you don't want to open new window.
 document.forms[0].submit();
</script>
</HTML>
Now, when user click Button "Register the user" it will open the new window.
But because it doesn't allow you to using default user, it will prompt user id and password.
After that it will submit the data to CallingFM
Now in CallingFM we already have the sy-uname = user-B.
CallingFM: address-> http://systemS1.sap.com/CallingFM/page1.htm
OnInputProcessing Part:
=================
call function 'zcreate_user' destination 'S2'
Why you need CallingFM BSP application? because you need to re-assign sy-uname in S1 from default user with user-B ID, and use it to connect to System S2, S3, etc.
Please note: SM59 and User Id must be set before this.
Because when you call RFC from other destination, SAP will refer to Logon setting in SM59 for that destination.
Hope this will help you.

Firefox for Android won't remember menu setting for "load desktop version" ("Last ned desktop-sider"n norwegian)

Have tried this on both release, beta and nightly versions.
Also have problem with AdBlock Plus and AdBlock Edge settings.
Some settings are not saved, and there is no way to edit filter list or add an image/ad from right-click menu
(but I guess that question is better asked in the AdBlock groups :-)

But why doesn't Firefox remember this setting?
Most pads have similar resolution to desktop PCs.
And then one would want desktop-pages all the time.
A bit unnecessary to have to install a plug-in for that.

Firefox won't remember my password etc on forums/websites i use regularly

I use ultimate reef and reef sanctuary forums and each time I access these sites I have to re-enter my user name and password despite having ticked the remember me box. I have same issue using btinternet.com. I am relatively new to Firefox having moved from IE due to having similar probs with my btinterent account, but didn't have them with the others.
Regards Trevor

* Websites remembering you and automatically log you in is stored in a cookie.
* You must allow that cookie (Tools > Options > Privacy > Cookies: Exceptions), especially for secure websites and if you let cookies expire when Firefox closes
* Make sure that you do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
* Make sure that you not run Firefox in [[Private Browsing]] mode

Mail cant remember login details for one of my accounts

I have a Yahoo account and Mail consistently fails to remember my user/password combo. I have check the server settings and they are fine, I have also deleted the email account from Mail yet the issues persists.
Can anyone advise before I launch my 2 month old MacBook Pro through the window?
If this helps, I dont have the same issue with my iphone, that works fine.
Thanks.

Thank you very much for your advice. Last evening I tried to log on to thank the first person whose answer advanced my situation. I appreciate anyone's willingness to help. I find it both rewarding and refreshing. Once again, thank you for your kindness.

I have been unable to update my IMovie app to version 10. It won't accept my password for my account.

i get an update notice for Imovie but when I try to update it the APP Store will not accept my Apple ID password. I have no problem updating other apps and downlaoding apps and music. I have the Mavericks OS but the problem is a carryover from Mountain Lion.

Hello Sriggers,
Welcome to the Apple Support Communities!
I understand that you are attempting to update some applications on your iPhone but the payment method was declined. In this situation, I would recommend reading over the information in the attached article to help resolve the situation.
Pay an unpaid balance in the iTunes Store - Apple Support
Best,
Joe

HT2822 How can I enter my login information for Apple TV?

I am at a hotel that requires a login to connect to the internet. I don't see any screen that allows me to enter a password. I can connect easily to the wifi, but can't get past that to iTunes.

Most hotels require you to log on to a web-page to connect to the Internet, you will not be able to do that with an Apple TV.

Version 4.0.1 won't remember login information for my financial websites?

Similar Messages

Maybe you are looking for