Version 4.1 Renew Lease Problem
Since upgrading my Gen2 iTouch to Version 4.1, I have to frequently click the "Renew Lease" button to connect to my home network. By frequently, I mean 1 or more times each day. This NEVER happened (not even once) prior to upgrading to 4.1 and have had my Gen2 since they first went on the market.
Anyone else having this problem? Is there a solution or is this a bug in the new firmware?
Have you tried resetting your router? Unplug it and wait ~15 sec, plug it back in. Also, make sure it has the latest firmware.
You can also try resetting your ipod - press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
Similar Messages
-
How do i solve the problem with repeated renew lease requests
How can i solve the problem of repeated renew lease requests?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
You don't say what you are doing or trying to do. See #5 below.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netwhttp://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-wonhttp://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bughttp://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading-http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hhttp://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sighttp://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-Ohttp://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connecthttp://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipadhttp://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asphttp://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxEhttp://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmzhttp://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Renewing lease for wifi problem
When using my iPad on wifi, I need to continually manually renew lease in network settings to stay online. Why?
Open up the control panel in your router, from the pad, or from a pc. There is likely a setting buried in there focused on lease time, or when a lease needs to be renewed. Change it. If you do not know how to get control of your router, google your routers name and control, or access address. It is a web type, or ip addrss that will take you to the router control page. You will likely need to log in, and usually the log in is guest with no password. If you have previously looged in and changed those defaults, use what you changed it to.
-
DGCserver messages in log... "Tried to renew lease on lost reference"
Hi,
I am running weblogic server 6.1 and get the following messages
####<Jan 30, 2002 2:36:55 PM CST> <Info> <DGCserver> <MBarton> <myserver> <ExecuteThread: '12' for queue: 'default'> <> <> <000000> <Tried to renew lease on lost reference: '706'>
I have seen in the newsgroup that this was a problem previously in version 4.5.1
any help would be appreciated.
best regards,
Mickey
This shouldn't cause any problems. Does it? We will turn off these info messages.
Cheers,
-- Prasad
Mickey Barton <[email protected]> wrote:
>Hi,
>I am running weblogic server 6.1 and get the following messages
>
>####<Jan 30, 2002 2:36:55 PM CST> <Info> <DGCserver> <MBarton> <myserver>
><ExecuteThread: '12' for queue: 'default'> <> <> <000000> <Tried to
>renew lease on lost reference: '706'>
>
>I have seen in the newsgroup that this was a problem previously in version
>4.5.1
>
>any help would be appreciated.
>
>best regards,
>Mickey
-
Tried to renew lease for lost reference
Hi
Oracle sessions get stuck on parsing all sessions accessing the same object wait
on "library cache pin".
We found one session coming from jdbc client waiting on "SQLNET message from client"
and holding all the rest sessions.
When we kill this session the problem resolves.
Following the port holding session with netstat, lsof and so on back to the jdbc
client side on different machine we only see error message connected to the same
port saying "tried to renew lease for lost reference". Our assumption is that
oracle lost connection with the client while locking a DB object when was doing
parsing and thus locked all sessions that wanted to access same object.
Did anybody encounter the same problem? How was resolved?
Thanks."Rich Kolkmeier" <[email protected]> wrote in message
news:3a366798$[email protected]..
In testing the cluster failover capability, I disconnected the
network cable from one of the servers I was running in a cluster.
The system failed over properly. When I reattached the network
cable, the system added the server back into the cluster. However,
I continue to get the following message:
Tue Dec 12 17:34:51 GMT 2000:<I> <DGCserver> tried to renew lease
for 1 lost references
(s).
What is the cause of this message? What needs to be done to clean
up the cluster?Rich,
This message is printed when one WebLogic kernel tries to renew a lease for
an remote object from another WebLogic which has already been collected. It
makes sense that this might happen in the failure scenario you describe.
When the network is disconnected DGC lease renewals can't be sent and the
kernel exporting the object may therefore believe that the object is no
longer in use and collect it. When the network is re-established the remote
objects may be gone.
However the fact that you are seeing this message printed repeatedly is
troubling. You may want to contact [email protected] with the
description you provided here along with the following additional
information.
Are you seeing this message on the client or server? If on the server is it
on the server that was disconnected or on one of the other servers? What
version (including service packs) of WebLogic are you running?
Regards,
Adam Messinger -
The Wi-Fi connection for my 3Gs on my Airport Extreme home network occasionally quits working, but by doing a Renew Lease under network settings on the phone I 'was' able to get it working again it right away. But now for some reason that no longer works. Any suggestions?
I tried Forget this Network and reconnecting, but that didn't do it.Well I called Apple and they were absolutely no help. They said the problem was likely with my Airport and not the phone, so I'd have to pay for support. I think that's bogus
-
DGCServer messages in log... "tried to renew lease"
Hi,
I'm running three WL 4.5.2 servers clustered, JDK1.1.7b on Solaris 2.6.
Normally the cluster runs just fine, but now I'm beginning to see the
following message in all three servers:
<DGCserver> tried to renew lease for lost ref: nnn
Usually they come in small bursts of about 5 or 10 messages that are the
same, except the "ref"s keep increasing. I'm guessing it has to do something
with the in-memory replication of sessions (which I'm using).
Any ideas? I tried restarting the servers but after a little while the
messages started again.
Thanks,
Matias
One common symptom for this (Bad Status Exception) has been long gc. If gc
takes more 30 seconds then you will start seeing these errors. To assertain
this, you could turn on weblogic.debug.cluster=1 and if you see a message "Timed
out server" in the log then you should tune your server.
Please use latest service packs.
thanks
- Prasad
Matias Pelenur wrote:
> Well, after a few restarts the DGC messages aren't appearing anymore... But
> something different is happening now which seems to be worse... And it's
> affecting performance too. For some pages, one of the servers will throw a
> bunch of exceptions (see below), and it seems it's cutting off the output so
> pages get only half-created. Any ideas? I don't think I changed any settings
> or anything like that.
>
> Thanks,
> Matias
>
> Fri Sep 15 11:19:15 EDT 2000:<E> <HTTP> Servlet request terminiated with
> Error:
> Fri Sep 15 11:19:15 EDT 2000:<E> <HTTP>
> weblogic.cluster.replication.BadStatusException: update found
> 1802540915606489052 but it is not the secondary
> at weblogic.rmi.extensions.BasicRequest.sendReceive(Compiled Code)
> at
> weblogic.cluster.replication.ReplicationManager_WLStub.update(Compiled Code)
> at
> weblogic.cluster.replication.ReplicationManager.updateSecondary(Compiled
> Code)
> at weblogic.servlet.internal.session.ReplicatedSession.sync(Compiled
> Code)
> at
> weblogic.servlet.internal.session.ReplicatedSessionContext.sync(Compiled
> Code)
> at weblogic.servlet.internal.ServletRequestImpl.syncSession(Compiled
> Code)
> at
> weblogic.servlet.internal.ServletContextImpl.invokeServlet(Compiled Code)
> at
> weblogic.servlet.internal.ServletContextImpl.invokeServlet(Compiled Code)
> at weblogic.socket.MuxableSocketHTTP.invokeServlet(Compiled Code)
> at weblogic.socket.MuxableSocketHTTP.execute(Compiled Code)
> at weblogic.t3.srvr.ExecuteThread.run(Compiled Code)
> --------------- nested within: ------------------
> weblogic.utils.NestedError: Tried to update secondary, but it thought it was
> the primary
> - with nested exception:
> [weblogic.cluster.replication.BadStatusException: update found
> 18025409156064890
> 52 but it is not the secondary]
> at java.lang.Throwable.<init>(Compiled Code)
> at java.lang.Error.<init>(Compiled Code)
> at weblogic.utils.NestedError.<init>(Compiled Code)
> at weblogic.servlet.internal.session.ReplicatedSession.sync(Compiled
> Code)
> at
> weblogic.servlet.internal.session.ReplicatedSessionContext.sync(Compiled
> Code)
> at weblogic.servlet.internal.ServletRequestImpl.syncSession(Compiled
> Code)
> at
> weblogic.servlet.internal.ServletContextImpl.invokeServlet(Compiled Code)
> at
> weblogic.servlet.internal.ServletContextImpl.invokeServlet(Compiled Code)
> at weblogic.socket.MuxableSocketHTTP.invokeServlet(Compiled Code)
> at weblogic.socket.MuxableSocketHTTP.execute(Compiled Code)
> at weblogic.t3.srvr.ExecuteThread.run(Compiled Code)
>
> "Prasad Peddada" <[email protected]> wrote in message
> news:[email protected]...
> > Is this causing any problems on the server. Like unable to create sessions
> for
> > servlets/jsp's
> >
> > If so, this is related to DGC bug, if not then it is something else,
> unless we
> > know the object it is trying to find, I can't be of much help.
> >
> > - Prasad
> >
> > Matias Pelenur wrote:
> >
> > > Hi,
> > > I'm running three WL 4.5.2 servers clustered, JDK1.1.7b on Solaris 2.6.
> > >
> > > Normally the cluster runs just fine, but now I'm beginning to see the
> > > following message in all three servers:
> > >
> > > <DGCserver> tried to renew lease for lost ref: nnn
> > >
> > > Usually they come in small bursts of about 5 or 10 messages that are the
> > > same, except the "ref"s keep increasing. I'm guessing it has to do
> something
> > > with the in-memory replication of sessions (which I'm using).
> > >
> > > Any ideas? I tried restarting the servers but after a little while the
> > > messages started again.
> > > Thanks,
> > >
> > > Matias
> >
Cheers
- Prasad
-
Renew License Problem - Option NSP and J2E (7.0) Windows Not Available
Hi all,
I Download and instaled the :
- SAP NetWeaver 7.0 Java Trial Version - SP14SR3
- SAP NetWeaver 7.0 ABAP Trial Version - SP12
for Windows almost 90 days ago.
To Renew the license I went to link "SAP Sneak Preview License Key Request"
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/minisap/minisap.htm]
But at "System Id *" combobox the correspondent options for Windows intalations above are not available (J2EE and NSP).
Pls, how to proceed ? I remember I did it with older versions (< SP14/SP12) with no problem.
Best Regards and thanks for your help.>
Klaus Keller wrote:
> see my posting at SAP NetWeaver Application Server
>
> Rgds,
> Klaus
Hi Mr. Klaus Keller, first at all, thanks a lot for your help,
After your msg I requested the license renew for NSP and J2EE with success, but when I tried to instal the new license file NSP.txt (User=SAP* / Transaction=SLICENSE) I received the error msg:
"Error when installing permanent license key - This system's system number is "000000000310714511", but there is a license key for system number "000000000310994500" in the license key file."
In fact the System Number on SLICENSE transaction and NSP.txt are diferents.
Looking at installation documentation (start.html / Getting Started) it shows the screen to request the renew license and it has the option below wich is not available at actual screen:
System number [ _________________ ] (For prologation only)
I tried to change the System Number manually at NSP.txt but the license becames invalid.
I did not try with J2E.txt license cause I notice that the System Number is different too.
Thanks for your attention,
Walmir Catunda.
PS. As the thread [No longer able to renew licenses for SAP Netweaver 2004 Linux Testdrive?|No longer able to renew licenses for SAP Netweaver 2004 Linux Testdrive?; is closed (answered) I will keep this and put a note to this one -
I'm having trouble staying connected to my home Wifi, it keeps going to 3G (I have never had this problem until today) When it is connected while I'm close to the router I click on the circled i after the linksys & it goes to the IP adress stuff, down a little waysafter the DNS & sarch domains it says Renew Lease - should I click on that?
DHCP is the system that dynamically assigns ip addresses from a pool of addresses.
You get a lease for the ip addresses. After the lease is up, the ip addresses is released and put back in the pool.
You get assigned another ip address.
Renewing the lease releases the IP address and assigns you a new one.
It will not cause any harm. -
Tried to renew lease on lost reference
Hi all,
Can anyone pls help me with the following issue?
I have encountered the following message.
<ExecuteThread: '3' for queue: 'default'> <> <> <000000> <Tried to renew lease
on lost reference: '388'>
After a while, the following message will appear.
<ExecuteThread: '15' for queue: 'default'> <> <> <000000> <Unsolicited error response
for: '-1'>
This shows the threads in the server are all used up.
I will like to know the cause for the first message to appear and how to prevent
it. Whenever this message appears, it is telling us the server is going to hang
soon. We have no idea how to fix this problem. Can anyone help? Thanks.I know the "tried to renew lease..." message you were getting was just some INFO
message that the server sent out. I believe this message has been surpressed
in Weblogic 6.1 SP3.
Not sure if the other message is part of that. I've been running with the service
pack for so long that I don't remember. :)
"apple" <[email protected]> wrote:
>
Hi all,
Can anyone pls help me with the following issue?
I have encountered the following message.
<ExecuteThread: '3' for queue: 'default'> <> <> <000000> <Tried to renew
lease
on lost reference: '388'>
After a while, the following message will appear.
<ExecuteThread: '15' for queue: 'default'> <> <> <000000> <Unsolicited
error response
for: '-1'>
This shows the threads in the server are all used up.
I will like to know the cause for the first message to appear and how
to prevent
it. Whenever this message appears, it is telling us the server is going
to hang
soon. We have no idea how to fix this problem. Can anyone help? Thanks. -
Tried to renew lease on lost reference in logs.
I am using Weblogic 6.1 SP1 with 2 cluster configuration. I am seeing a lot of
"Tried to renew lease on lost reference" msgs in my logs. These msgs seems to
be logged almost every minute.
I would like to know what does this msg mean and how would I elimiate this msg
from my logs.
Any help will be appreciated.
Thanks
Albert
I am relatively sure it has to do with RMI and distributed "garbage
collection", so it may be related to some of your replicated JNDI entries.
The other question is what is causing the problem in the first place. Are
your servers under intense load or are the exec threads getting saturated
(whether or not the other resources like CPU are saturated)?
As far as the low-level RMI implementation, I know that Weblogic has its own
implementation for significant portions of RMI, but I don't know much about
the implementation, so it is hard to guess. You may be able to get some
additional pointers from Prasad Peddada[[email protected]].
Peace,
Cameron Purdy
Tangosol Inc.
Tangosol Coherence: Clustered Coherent Cache for J2EE
Information at http://www.tangosol.com/
"Albert" <[email protected]> wrote in message
news:[email protected]...
>
> Cameron,
>
> My application doesn't have any EJB's. It is a JSP/Servlet/Oracle based
application.
> Do you think of anything in this context.
>
> Thanks
> Albert
>
> "Cameron Purdy" <[email protected]> wrote:
> >Do you use stateful session EJBs? Make sure you remove them when done.
> >
> >Peace,
> >
> >--
> >Cameron Purdy
> >Tangosol Inc.
> >Tangosol Coherence: Clustered Coherent Cache for J2EE
> >Information at http://www.tangosol.com/
> >
> >
> >"Albert" <[email protected]> wrote in message
> >news:[email protected]...
> >>
> >> I am using Weblogic 6.1 SP1 with 2 cluster configuration. I am seeing
> >a
> >lot of
> >> "Tried to renew lease on lost reference" msgs in my logs. These msgs
> >seems
> >to
> >> be logged almost every minute.
> >> I would like to know what does this msg mean and how would I elimiate
> >this
> >msg
> >> from my logs.
> >> Any help will be appreciated.
> >>
> >> Thanks
> >> Albert
> >>
> >
> >
>
-
DGCServer - tried to renew lease for lost ref: 509
Recently we have been getting ALOTof messages in our server log file of the
form:
Fri Jul 14 10:08:19 PDT 2000:<I> <DGCserver> tried to renew lease for lost
ref: 509
We use RMI for java client to server communcation and are using Weblogic
4.5.1 SP 8
with nativeIO enabled.
What could be causing these messages?
Thanks!
RickThanks! I still have one problem, the lease renewal messages for lost
references never seem
to end for the specific reference. I have a weblogic.log file with hundreds
of those messages for
each lost reference (and still going). It seems that it is not giving
up... any ideas?
Rick
"Michael Girdley" <[email protected]> wrote in message
news:396fa6c8$[email protected]..
Normally, I would ask a customer in the situation to provide more about
their application. But, since I know a lot about how your application is
architected, I would guess the people are shutting down their browserswhile
your applet still running. The applet is not closing the socket cleanly
with Weblogic. The distributed garbage collector, which keeps track ofall
of the distributed objects, is trying to renew a lease for that object.It
cannot locate it and will eventually give up on it.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
Rick Spickelmier <[email protected]> wrote in message
news:396f960d$[email protected]..
Recently we have been getting ALOTof messages in our server log file ofthe
form:
Fri Jul 14 10:08:19 PDT 2000:<I> <DGCserver> tried to renew lease forlost
ref: 509
We use RMI for java client to server communcation and are using Weblogic
4.5.1 SP 8
with nativeIO enabled.
What could be causing these messages?
Thanks!
Rick -
Itouch 2nd gen. have to renew lease after every sleep mode
Recently my wife and I are having trouble with constantly renewing the lease for internet through wifi in our home. Wife has ipad and I have itouch 2nd gen. Any one know how to fix this. Can't think of any changes except for my itouch upgrading to 4.2.1
Yes, I tried resetting the network on both devices, but was unsuccessful. I did a total reset of the modem and router and the problem remained. Finally, I enabled the RIP which allows the router to send and recieve packets from the ISP. This seemed to have fixed the problem. I have not had to renew lease, since. Thank you for your reply. That was a good start.
-
the problem I have since I upgraded to Mavericks version 10.9.1
The problem appears only with Mail not with other programs, not even with my browser.
When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
As I have a problem with my eyes, This is a serious matter for me.
When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10". -
when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please
Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?
Maybe you are looking for
-
I just bought an Ipod touch and i downloaded game center. I have no friends but I want to play with people around the world on NBA Jam and other games how do I get someone to play with me I dont see any buttons.
-
Running applescript in background (as a standalone app or iTunes script)
Hiya, I'm working on making an Apple script that syncs my currently playing track with Twitter, Facebook, and Last.fm. I have the syncing portion worked out, but the method in which the program receives information is not ideal. I was wondering if th
-
We have a table containing 40M records with 5 years old data. I need to create a history table to keep data more than 12 month old so that the current table only keeps the most recent 12 months old data. Two questions: 1. Should I create a different
-
Morning Guys, How do I start Enterprise Manager on the Solaris Console. Thank you.
-
Import from Picasa - Album names
I'm in the process of migrating from Picasa to Lightroom and have a number of questions. I'm posing these separately to help others search later Should the thread be worthwhile. One is: Is there a way to get the Picasa album name into metadata som