Version 6.7 not as Versatile as 6.5

I have upgraded to Nokia PC suite 6.7 but find that it is not as versatile as 6.5. Being a Nokia fan I have several Nokia phones including 3 of the same model. As I use the phones for different purposes I have named them individually. e.g.
N6230i – Vod Contract;
N6100 – Vod PAYG;
N6100 – O2 PAYG;
N3100 – Vod Spain;
N6230 – Bob Vod Portugal
N6100 – Ann Vod Portugal
PC suite 6.5 had a Master folder containing Contacts, Gallery (Tones & Graphics) as well as a folder for each individual phone. In the Master folder I kept all my Contacts and would copy as relevant into the individual phone. As version 6.7 does not have a Master folder I cannot follow the same process.
Similarly with version 6.5 on my PC, I created a folder called Mobile Phones that contained sub folders named according to the individual phones. Therefore, when I backed up a specific phone, the backup file was directed into the relevant folder. As version 6.7 does not have the facility to create separate folders for backup files I again cannot follow the same process.
If my assessment of 6.7 is wrong, please guide me onto the correct path.
I use Windows XP with service pack 2 on my PC
I look forward to solutions which will make 6.7 as versatile as 6.5
BobRob

Thanks for the quick reply.
Do you see the BlackBerry splash screen when you try to open the application?
Follow the steps in this KB article to perform a clean uninstall of BlackBerry Desktop Software: www.blackberry.com/btsc/KB02206
Once you complete all the steps, restart the computer and then attempt to install the software from www.blackberry.com/desktop.
Let me know if you run into any trouble.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Similar Messages

Version 1 is not getting activated in PR and PO

We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
Full points will be awarded.

Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Dear Amir,
in pr version management , control data :select version active,version 0 ok, & external ok. &
field selection : reason required,short text req., requester req., external number & posting date are optional & save.
even with release strategy there is no problem
create a pr & save it.After release it. change the pr
after u canfind the versions 0 & 1.
in po version management , doc.category f doc.type nb pur.org xxxx ,control data :select version active,version 0 ok, field selection : reason required,short text req., requester req., external number & posting date are optional & save.
go to Set Up Change Displays as per standard nb is already there no need to change & category is blank
in category u have to maintain f(is for po) & save it.
create a po & save it.After release it. change the po
after u canfind the versions 0 & 1.
Regard's
Raj.

Why will the new version of picasa not work on my imac

Why will my upgraded version of picasa not work on my IMac???HELP
It will start to load and then error message and cuts off. ( Picasa is photo editing software)

Picasa is not an Apple product.
You should ask the developers why they have not updated their application.

I've upgraded to 6.0.1 and now firefox no longer loades AT ALL. I get this XULRunner error: Platform version "5.0" not compatable with minVersion = 6.0.1 and maxVersion = 6.0.1. What can I do to get Firefox working again as my browser?

After deleting everything, I've also tried to reload 3.6.12 fresh and I get a totally different nss3.dll entry point cannot be found error.

Download a fresh Firefox copy and save the file to the desktop.
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! What is wrong?

I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! Is the new version not compatible with Windows Vista?

I hope that link points to mozilla.com or mozilla.org
You will have to close firefox.exe with the Windows Task Manager from the "Processes" tab of the WTM since you don't have a widow to close.
The best way to close Firefox is through File > Exit, for those who stuck with the "Firefox" button click on the Firefox button then Exit. It is not perfect but it is a lot better than just closing the window with the "X" in the upper right corner

VERSION 0 IS NOT DEFINED FOR FISACL YEAR 2007,

i am learning SAP PP and i hv ides 4.7,
now WHEN SAVING ORDER i.e DURING COST CALCULATION I GET A MESSAGE THAT VERSION 0 IS NOT DEFINED FOR FISACL YEAR 2007,
ON ANALYSING IT LEADS TO T.CODE OKEV BUT HERE SYSTEM DOES NOT PERMIT TO CHANGE THE VERSION, BUT IN ECC 5.0 IT ALLOWS ,
WHAT IS THE PROBLEM, CAN ANY ONE PL. HELP ME,
analysis of error gives following message:
Activation of the indicator is not permitted
Message no. KT253
Diagnosis
You activated an indicator (Plan, Actual, WIP/results analysis or Variance calculation ) in the basic settings for version 1 in controlling area 1000. However, a higher order of settings (general version definition) prevents you from setting this indicator in version 1.
Note
The following should be taken into account when maintaining a version:
In general version definition you decide whether a version is allowed for
     Panning (with the Plan indicator)
     Actual data update (with the Actual indicator)
Note: In Overhead Cost Controlling, actual data is updated in operational version 0.
Actual versions different from 0 are found at present only for delta versions in Activity Based Costing (CO-ABC), and when you work with parallel assesment ( additional versions):
     A data version from results and WIP determination manages (indicator WIP)
     Another version from variance determination manages (indicator Variance)
     A version for exclusive use (field exclusive application)
You must maintain the version basic settings for each controlling area in which you want to update transaction data. General version definition restricts the settings possible for the controlling area:
     If general version definition does not allow plan and/or actual data update for version, this applies to the version in all controlling areas. If plan and/or actual data updating is allowed for a version in general definition, this can be reset for each controlling area separately (unmark the plan or actual indicator).
     Delta versions in ABC may not be used for parallel valuations in the actual; the same goes for versions with exclusive applications. In both cases, the valuation fields may not be maintained.
To set indicators WIP/Results- or Variance-determination the following conditions apply:
     Both indicators may be set only during setup for the controlling area, when they are already established in the higher level general version definition
     If either indicator is already active in the data bank, then the actual indicator may not be subsequently activated
     If the actual indicator is inactive and either of these indicators is active, then the valuations in the corresponding versions and in version "000" must agree
     If the actual indicator is active, then both indicators must be activated
Versions 0 and 1 are used regularly for various purposes by the system, which sets the following limitations/restrictions:
     Version 0 must always be available. It cannot be used exclusively. The plan and actual indicators must always be active.
     The actual indicator may not be activated in version 1.
If these conditions are violated during version maintenance, error messages are issued. There are three types of error message:
1. While maintaining the general version definition, you can only make changes if they do not violate the conditions outlined above.
2. While maintaining the basic settings in the controlling area, the entries must remain consistent with the higher level entries.
3. You want to maintain version 0 or 1. The restrictions outlined above apply.
Use the "Extras" menu option to display the structure of the entries in the complex data object version:
     Select a version and choose Extras -> Version use.
The SAP System shows which controlling areas use this version.
     Select Extras -> Versions in CO area
This displays all versions used in the current controlling area.
The subordinate entries in the hierarchy (settings for each fiscal year, strategic Activity-Based Costing: transactions for a delta versions) will also be shown for both cases.
Procedure
Do not activate the indicator, or change the higher order of settings in the general version definition.

Raj,
What are you trying to change?
To me you are not suppose to make any changes, you need to select the version "0" and then hit "Settings for each Fiscal year" subfolder.... here you copy the settings of 2006 and change the year to 2007. This should resolve the problem.
Regards,
Prasobh

Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated. How do I get rid of the list after they've been updated? In the previous version I did not have an annoying permanent list.

Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated. How do I get rid of the list after they've been updated? In the previous version I did not have an annoying permanent list.

iOS 7 allows you to have your apps update automatically. Therefore, the list of what has been updated stays so that you can see what was updated, when and what the release notes say. It has been suggested that they list has a limit, much like Recents. Currently, there is no way for the user to delete the entries manually. Just try not to look at them.

Chararacteristic 0CALQUARTER is available in version M but not in version D

Dear Sirs
I hope you're doing fine. While activating InfoCube 0PUR_C01 I get the following error:
RSAU709 : Chararacteristic 0CALQUARTER is available in version M but not in version D.
(Yes, the word characteristic is misspelled in the message text)
There is no more detailed information so I'm stuck..Please help.
With best regards
Manuel

Try executing the function module RSDG_IOBC_REORG function module in transaction SE37 (F8 -> single test) with the following parameters:
Function module RSDG_IOBC_REORG
Import parameter Value
I_OBJVERS A
I_PROGRESS
I_IOBJTP *
I_ALL_IOBJ X
I_T_IOBJNM 0 entries
I_BYPASS_BUFFER
F8 -> Execute

I am using itunes version 9.its not updating..Pls help as how can i update my itunes to the latest version??????

i am using itunes version 9.its not updating..Pls help as how can i update my itunes to the latest version??????

See this for Windows... http://support.apple.com/kb/TS1538
and this for Mac OS X... http://support.apple.com/kb/TS1591

My iphone 3gs with version 4.0 not works for apple TV should i need to download any app or any other thng

my iphone 3gs with version 4.0 not works for apple TV what should i do?

Welcome to the Apple community.
You should update your iPhone software.

Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?

Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?

You can download firefox 3.6.16 here: http://www.mozilla.com/en-US/firefox/all-older.html

Please Please help me. I have been trying to install Itunes 11 for 3 months. I deleted my old version and can not for the life of me get Itunes installed . I have Windows 7 Home. The message is " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BDOAF1

Please Please help me. I have been trying to install Itunes 11 for 3 months. I deleted my old version and can not for the life of me get Itunes installed . I have Windows 7 Home. The message is " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BDOAF1

Try the following user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

Version 6 will not open in Windows 7 on 32 bit PC

I can operate Blackberry Desktop software version 5 without any difficulty but all attempts to install version 6 result in failure.
Version 6 will not even open to run.
Using a recent high spec PC running windows 7 pro and M'soft Office Outlook 2007.
Please help!

Thanks for the quick reply.
Do you see the BlackBerry splash screen when you try to open the application?
Follow the steps in this KB article to perform a clean uninstall of BlackBerry Desktop Software: www.blackberry.com/btsc/KB02206
Once you complete all the steps, restart the computer and then attempt to install the software from www.blackberry.com/desktop.
Let me know if you run into any trouble.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Search function will work in Adobe Acrobat version 9, but not version 7.

When opening the same PDF in Adobe Acrobat 7 and Adobe Acrobat 9, the search function only finds text in version 9 and not in version 7 when an identical word is typed in the search field on the top right side of the window. It is important that the document can be searched in both versions. Is this possible? Any idea on why this issue is occurring or how the search function can work if it is not opened in Adobe 9?
Thank you for your time.

It has been a part of Acrobat for a while now but DWF was added in Acrobat 8, I believe. As far as older versions are concerned, the version of AutoCAD you have matters. See: http://blogs.adobe.com/pdfitmatters/2008/12/version_compatibility_of_acrob.html. In addition, AutoCAD 2009 is supported in Acrobat 9.1.
I would recommend downloading a trial copy of Acrobat and see if it meets your requirements.

Lately I've been importing photos from my iPhone and when I attempt to edit them they seem to disappear. Some reappper as a photo stream pic (some as the edited version and some not). But they no longer appear as a recent import. Lots more happens

Lately I've been importing photos from my iPhone to iPhoto and when I attempt to edit them they seem to disappear. Some reappper as a photo stream pic (some as the edited version and some not). But they no longer appear as a recent import. Lots more happens and I'm wondering if it's because I have a 5-year old Mac book or iPhoto is having issues. I'm not happy with disappearing photos especially after I've deleted them from my iphone after importing them to my macbook.
Has anyone experienced similar difficulties and what can I do?

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Version 6.7 not as Versatile as 6.5

Similar Messages

Maybe you are looking for